Review

Brigand Arms Forearm Review

Written by: Michael C.

I’ve always been a function over style type person.  When I first saw the Brigand Arms handguard I thought it was stylish, but not very functional.  It looked like under heavy firing it would get hot because it was so wide open the heat from the barrel would radiate to the shooters hand.  

When I took the Tactical Performance Center Multi-gun class we were told to bring a wrap or glove because the rifle forearm would probably get very hot due to the large amount of fast shooting we would we be conducting.  During the three-day course, the forearm on my Armalite 3-gun rifle did get warm but not so much that it bothered me.  After this experience I thought the Brigand Arms would really get too hot to handle.

The lack of a rails didn’t bother me as those are only needed on a “tactical” rifle to mount lights, lasers, grips and bottle openers.  This is not a rail that one would choose for that application.  It just looked cool.

After hearing a positive review of the Brigand Arms handguard on the We Like Shooting podcast and the AR-15 podcast on the Firearms Radio Network  I thought I would give it a try. But first I had to see if Brownell’s carried the Brigand Arms handguard.  I’ve been a Brownell’s customer long before I started reviewing gear.  The customer service has always been excellent, and they have the best website in the business.  Has a bonus Brownell’s has the Forever Guarantee - no questions asked return policy.  So, if I don’t like it or decide I don’t want it, I can return it. And has an Edge member I don’t pay for shipping!  Including returns!

When the package arrived, I thought the box was empty because it was so light.  I opened the box and there was my new woven carbon fiber handguard!  I ordered the fifteen inch “Blade” version.  I think the Blade version really adds to the unique design of the handguard design.  The Blade is angled at the front and because of the mounting system you can run the angle however you like: long on the bottom, short on the top; long on the top, short on the bottom; or anywhere along the 360 degree radius.   

Unpackaging the forearm I was reminded of an issue with woven carbon fiber – loose fibers.  I caught a loose fiber in my hand, like a wood splinter.  I took a break to remove the foreign body from my finger and then put on my welding gloves.  I ran the gloves over the handguard to remove any loose fibers I imagine you could do the same thing with a shop rag, just make sure to throw the shop rag away when you are done.  This is not a negative against the Brigand Arms handguard, it’s common to all woven carbon fiber products, just part of the required pre-installation: wipe down the handguard.  Please note I have taken the rifle out five times since I mounted the hand guard with no more splinter issues.  There are three parts in the package: handguard, barrel nut and cinch nut.  The barrel nut is aluminum and appears to be similar to the YHM barrel nut, and the cinch nut appears to be similar to the YHM jam nut.  This is smart outsourcing by Brigand Arms, use off the shelf items to cut cost.  This is a smart move by Brigand Arms to lower the price of the handguard.  And since this is one of the pricier handguards on the market anything that can be used to lower costs while maintaining quality is a smart move.  Like Scrooge McDuck said, “Don’t work harder, work smarter.”

To start the installation I put a dap of release agent on the barrel extension on my custom order 18 inch, light profile, rifle gas system, 1-7 barrel I from Columbia River Arms and inserted it into a Vltor MUR upper receiver.  I really like the Vltor because I have yet to find one out of spec.  They look like billet, but they are forged and a little thicker than a mil-spec upper.  Next, I put a dap of LocTite 242 (blue) onto the threads of the receiver and tightened the barrel nut to the recommended torque of 34 – 40 foot pounds.  Next I installed the Brownell’s black nitride gas tube mounted to a JP Enterprise  AR-15 2 piece detent adjustable low profile gas block. The gas tube runs through the barrel nut so it’s important to make sure the barrel nut is aligned properly.  If the tube doesn’t fit through the nut keep tightening it a little bit at a time until it freely aligns with the gas key on the bolt carrier group.

Installing the handguard was very straight forward.  Like installing a YHM handguard.  In fact, Brigand Arms recommends on their FAQ web page to use the YHM handguard wrench to install the handguard.  Alternative ways are to tighten the cinch nut is with a spanner wrench, strap wrench or give the cinch nut a tap with a flat head screw driver.   I had a spanner wrench on hand and I wrapped the areas that might mare the finish with duct tape.  I was unable to get adequate torque on the cinch nut to keep the handguard form turning.  I made a quick trip to my local gun store Cobra Tactical (one of my sponsors) and asked Eric if he had the YHM handguard wrench.  He was kind enough to loan me the tool, so I could finish the build.

With the upper assembled I headed out to the range.  One of the first thing I noticed was how easy it was to access the adjustable gas block.  All too often the handguard must be removed to access the adjustments to the gas block, then reinstalled and you hope you have it adjusted properly.  

The test and evaluation for this upper was actually for five new parts: Brigand Arms handguard, Columbia Arms Barrel, UM Tactical RAGE muzzle brake, JP Enterprise low mass bolt carrier group and JP Enterprise silent captured spring recoil system, and Geisslle charging handle.  After getting everything tuned up (I will cover these items in a later review) I laid the handguard on a sand bag to check the accuracy of the build.  Awesome is all I can say regarding the accuracy of this build.  I was pleasantly surprised at how solid the handguard was on the rest.  No flexing or torquing while shooting off the sand bag. The sand bags at the range are the heavy plastic and I was surprised to see no melting or deformation from heat of the barrel to the bag.  Inspecting the handguard, I could not see and deformation or wear marks on it.

Next test came the test for what I thought would be the problem, heat radiating from the barrel through the hand guard.  I did a series of speed and transition drills without pause.  I finished with two 30 round magazine dumps.  Surprisingly the handguard never became too hot to handle or uncomfortable to hold.  Another surprise was how quickly the barrel cooled.  Just has the Brigand Arms stated in their interviews on the Firearms Radio Network because of the lack of surface area on the handguard the barrel cools quickly.

I’ve been able to take the rifle to the range five more times and even practiced dumping the rifle into a USPSA box and 3 Gun Nation barrel.  No damage to the handguard.  The handguard is a little larger in diameter than some other handguards but still fits well in the hand. The woven pattern of the hand guard makes for a good gripping surface. I practiced holding the handguard in different positions, all were secure, and it was easy to control the weapon.  

Brigand Arms makes three models of the woven carbon fiber handguard: Blade, Edge and Atlas.  The Edge is like the Blade but with a flat front.  The Atlas is like the Edge but adds a four short picatinny rails at 3, 6, 9 and 12 positions at the front of the handguard.   If you want to add rails Brigand Arms handguards, they are prepared for you.  You can purchase rail sections and add them wherever you want on the handguard.  Brigand Arms also sells M-Loc panels you can add anywhere to the handguard.

Overall, I am very pleased with the Brigand Arms handguard. It is performing better than I imagined it would.  The handguards are expensive, $259.00 to $414.00, but they are worth it.  Brigand Arms has added AR-10 DPMS-Hi style handguards to their shop.  I will be buying one of these for a light weight AR-.308 build.  I’m expecting the same outstanding performance from the .308 models.

Brigand Arms are innovators and I look forward to seeing other products they bring to market.

FIREARMS INSIDER REVIEW – 8 KEY POINTS


CLAIM TO FAME:

Lightest handguard available

TARGET MARKET:

Modern Sporting Rifle users who want a light weight unique handguard.

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):

  • Lightweight

  • Easy installation

  • Unique look

  • Adds in barrel cooling

  • Off the shelf mounting hardware

  • Ease of access to adjustable gas blocks

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

  • Three different styles

  • Four different lengths

  • Available for AR15 and AR10 (DPMS)

  • Bare carbon fiber

  • Handguard can be Cerakoted

WHAT OTHERS ARE SAYING?:

Coolest and most interesting product at SHOT Show

LINK TO OTHER REVIEWS:

Brigand Arms website - Reviews

PRICE POINT:

MSRP:  $269.00 - $414.00

I NEED IT NOW! AVAILABILTY:

Brownells or Brigand Arms

OUR RATING:

Pros:

  • Easy to install

  • Lightweight

  • Feels good in the grasp

  • Looks wicked cool

Cons:

  • Expensive

  • No continuous rail on top

 

SCORE:  9.0 EXCELLENT

90.jpg

Trojan Firearms Flat Trigger

 

  Trojan Firearms is a company that is probably more know for their pistol caliber carbines. Besides this, they also make some other bits and pieces for AR style rifles. That leads us to the new single stage TFA-15S Flat trigger assembly. They also manufacture a curved version for those that don't like straight triggers. Trojan supplied one of each for review, another reviewer was sent the curved version.

  Besides being flat, this trigger has some nice touches. First off, it is a cassette style drop in. So all you have to do to install it is remove the safety and the old trigger, then it drops right in. The TFA-15 uses a shoulder bolt mounting system unlike any drop-in trigger I've seen. This eliminates the need for anti-rotate pins and for trigger pins period. Just install the screws, on each side, where the trigger pins would sit and tighten down. They also supply star washers to go on these screws. I don't think they are needed and they could possibly mar the finish around the pin holes. Another really nice touch, is the adjustment lock screw. The lock screw puts pressure on the adjustment screw so the trigger adjustment remains consistent even after long periods of use. The trigger also has 2 setscrews facing downward to lock the trigger against the mounting bolts.

  I like being able to adjust the pull weight of triggers. The TFA-15 uses the somewhat standard single screw adjustment method. Screw the adjustment screw in for a heavier trigger pull, and out for a lighter one. But, with the single adjustment screw, comes reset adjustment also. Basically when you lighten the trigger, the reset becomes lighter also, or not as positive. If you adjust the trigger too light, you don't get any reset on the trigger and have to reset it manually. I was able to adjust the trigger from 2.5 lbs to around 7 lbs. But to get 2.5 lbs, I had to measure the pull weight at the tip of the trigger. So where I normally rest my finger, it came in at 3.5 lbs. The first trigger that Trojan sent didn't pass a safety check, it would fire the hammer when the safety lever was moved to the fire position. Trojan immediately sent me a new one. They even called me to help figure out the problem. Also note worthy, the TFA-15S has a longer trigger bow length. The bottom of the triangle shaped shoe sets just slightly above a standard trigger guard. I really liked how it rested on my finger when using the lower portion of the trigger. 

  After using the TFA-15 for some time now, I really like the straight shoe. As noted above, I have it adjusted almost all the way down. When you pull the trigger really super slow, you notice what feels like creep, but is actually the sear sliding on the hammer. There is virtually no creep! Because I have the pull weight tuned down, the reset is a little spongy when releasing the trigger slowly. If I bump up the pull weight by 1/2 lb, the spongy feel basically goes away. Even though you can feel the sear sliding, it is so smooth. It somewhat reminds me of a 1911 trigger. I also couldn't distinguish any over travel of the trigger. Plus, if pulling the trigger at a somewhat normal pace, the pull just feels crisp (like breaking a glass rod). Yes, I have broken a glass rod to know what it feels like.

  Every time I review an AR trigger, I try it with my .22 lr conversion. The TFA-15 is one of the few aftermarket triggers that actually worked! Most don't have enough hammer energy to set off the rimfire cases consistently. Another great feature of this trigger is the ability to cycle the action while the safety selector is in the "safe" position. Hey, why not be able to load a round with the safety on.

  I really liked how the trigger arrived with a super smooth pull. Other triggers I have used take some break in until they felt like this. If you are looking for a decent drop-in trigger system, go look at Trojan Firearms. Their customer service is top notch, and they manufacture more than just triggers.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Drop in Adjustable AR-15 trigger

Target Market:

Modern Sporting Rifle users who want a better trigger pull

FNBs (Features & Benefits of this product):

  • Single Stage
  • Adjustable trigger pull weight from 2.5 to 6.5 range(pull weight may vary depending on finger placement of trigger bow)
  • Extremely short and crisp trigger pull and near 0 reset
  • Polished contact surfaces for an enhanced smooth trigger pull and reset
  • BLACKNITRIDE™ coating of steel parts
  • Heat treated 4140 steel parts
  • Red Anodized Aluminum Housing
  • Self-contained
  • Secondary safety catch for increased reliability against accidental drops.
  • Propitiatory mounting system (shoulder bolts)
  • "Safe" position cycling
  • Installation and adjustment wrenches included

What other aesthetic options or finishes are available?

Curved Trigger

What others are saying?:

Trigger is very new

Link to other reviews:

Trigger is very new

Price point:

MSRP = $149.99

I need it now! Availability:

Trojan Firearms

Our Rating:

Pros:

  • Adjustable pull weight

  • Longer Straight trigger bow

  • Easy Installation

  • Works with .22 LR conversion

  • Smooth pull

  • Can cycle action while on "safe"

  • Adjustment lock screw

Cons:

  • Somewhat mushy reset 

  • Star washers

  • First trigger wasn't safe (Trojan Quickly Remedied)

Score: 7.5 Good

75.jpg

 

Favorite Link:   AR15 Podcast

 

Polymer 80 PF940C

  I have to admit, that after seeing the Polymer 80 PF940c frame in person, I had to get one. Polymer 80 was gracious enough to send one to me for review. The PF940C frame came in 3 colors at the time, so I opted for gray, more colors have been added since then. This is a 80% frame for Glock Gen 3 parts. One must first machine the frame to get it to function.

  When I first received the frame, I noticed that it came with all the tools needed to finish it out. The only thing missing was a drill press or a dremel tool. The kit includes a plastic jig that the pistol sits in. This jig is a one time use type of deal, but works really well. Basically you pull up the online instructions and go from there. Brownells also has a video series on machining the frame. First thing I did was drill the holes. Drill each hole from each side of the jig, don't think that you can just drill through the whole thing. Next, I actually took a mill and machined off the four "nubs". One can use a file, a dremel, or a drill press with a vise for this also. The last machining step is probably the hardest. In this step they have you mill out the recoil spring channel. Just pay close attention and you'll be fine. I had to dremel the channel out some more after I installed the locking block so that the recoil spring moved smoothly. I figured that you can always remove more material, but you can't add material.

  After the machining steps are done, it on to installing parts. The Polymer 80 PF940C frame kit comes with a locking block/front slide rails insert. Just drop this in and install the front pin. Also in the kit is a Rear Rail Module. This rail piece sits around the Gen 3 G19 trigger mechanism housing. I really like how they did this as it gives metal rear slide rails and is easy to install. All the other gen 3 parts go in just like a standard Glock 19. If you don't feel comfortable doing this yourself, please take it to a gunsmith.

As received

After machining and parts installation

  Now that it is assembled, it's time to go into some things I noticed about the PF940C. I love the grip texture that comes on the frame! It is not too rough, but not smooth either. It feels kind of like they glued sand on the frame. I did run into a problem with the takedown spring. The channel in the frame, where the flat tab sits, was not cleaned out, or still had a thin piece of plastic from the molding process. This made the spring sit too high and put upward pressure on the slide. I took a sharp x-acto knife and just moved it back and forth to clear out the slot. This worked good, and the spring flat slid in and sits flush. The other hitch I ran into had to do with the recoil spring channel. As mentioned above, I dremelled out more of the channel, this was so the spring wouldn't rub on the sides of the channel. Result, smooth as butter. 

  The PF940C frame has some improvements over a stock Glock 19. Besides the texture I previously noted, It has a really nice undercut trigger guard so you can really get your hand up high on the pistol. I didn't care for the front of the trigger guard, it's squared off angle looks good, but makes it not fit in some Glock 19 holsters. Holster makers are starting to address this problem, so in the future your options should be better. Polymer 80 also makes a smooth frame for those wishing to add their own texture. For those with larger hands, It also has an extended beavertail. My favorite is probably the different grip angle. This grip angle just works better for me than a stock Glock. You may, or may not like it, it really is personal preference. There is also a STANAG rail up front to mount a light. My frame, when using a Grey Ghost Precision slide and barrel, locked up super tight. It took about 100 rounds before it would cycle consistently. I could have cycled the slide by hand to get the same result, but I was excited to go shoot it.

  These Polymer 80 frames are pretty neat. If you like to build stuff on your own, or just want something different, these might just be the ticket. I had a good time building the PF940C frame into a complete pistol. These kits are really great for building a custom "Glockish" pistol. Go check Polymer 80 out, pistol frames are not the only thing they make.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Glock 19 style 80% frame kit

Target Market:

Those wanting to machine a 80% G19 size frame, or those wanting to build a complete G19 size pistol

FNBs (Features & Benefits of this product):

  • Comes with all tools and Jig for machining

  • Online instructions

  • Easy to machine

  • Textured frame

  • Undercut trigger guard

  • Uses Gen 3 Glock 19 parts

  • Metal front and rear slide rails

  • Slight beavertail

  • Built in Metal plate for engraving ser#, etc

  • Picatinny Rail

  • Thumb ledge

  • Available without texture

  • Delivered to your door

What other aesthetic options or finishes are available?

Black, FDE, OD Green, Robin Egg Blue, White, and Cobalt

What others are saying?:

By Hollywood at GlockStore.com 5/5 stars

BETTER THAN A FACTORY GLOCK LOWER

I was blown away with how easy this was to finish. I used a drill press, but have no doubts this could have been done just a good with simple hand tools. I decided to go with a custom slide, so I did have to rack it about 150-200 times before it would move smoothly. With a Glock factory slide I'm sure it would not have required as much effort. Everything about this lower is exceptional. I field tested it putting about 250-300 rounds down range. I did have three malfunctions within the first 25 rounds but after that, she was flawless. I would have complete trust in this weapon as a daily carry. Do yourself a favor and get one... maybe two of these. They are fun to finish and even better to shoot. Plus they look great.

By Templeton P. at Brownells 5/5 stars

CAME TOGETHER NICELY

I assume because of these receivers, demand for even just plain old used Glock 19/23 uppers seems to have skyrocketed. It's hard to find one under $300 unless you get really lucky. You will NOT save money vs buying a new Gen 3 Glock (or probably even a Gen 4) by doing it this way. I was seeing used Gen 3 G23s for $299 just a couple of weeks ago. That being said, this is a fun project, and everything can just come to your door. Had never attempted anything similar, but it was relatively easy to complete. I didn't have a mill, but instead bought a milling bit for my Dremel. I had the Dremel Router/Shaper table accessory and it made the job exponentially easier. If you plan to use a Dremel, I would highly recommend spending the extra $35 for this add-on. Freehanded the barrel block. Put the jig in a vice and just took my time and it went okay. Drilling the holes is a no brainer as well. Sanded things down and installed the parts kit without much fighting. Grabbed a box of cheap ammo and worked flawlessly at the range from the first trigger pull. Needs more range time before I trust it completely, but so far so good. Ergonomically, I also find this feels better in my hand than actual Glocks. Going to try a 9mm conversion barrel next.

Link to other reviews:

We Like Shooting review

Price point:

MSRP = $160.00

Retail = $149.99 at Brownells

I need it now! Availability:

Brownells

Our Rating:

Pros:

  • Comes with all tooling (Jig, Mill, Drills)

  • Frame texture

  • Uses Gen 3 Glock parts

  • Undercut trigger guard

  • Multiple colors

  • Can be completed with a dremel

Cons:

  • Some patience needed for small problems

  • Not all standard G19 holsters fit

  • Sharp angled front of trigger guard

Score: 7.00 Good

70.jpg

 

Chad's Favorite Link:   Poly Gun Mods

 

SAM XT TOURNIQUET

CAT, SOF-T, SWAT-T... And now SAM XT Tourniquet has entered the battlefield. For over 30 years, SAM Medical Products, an industry leader in the pre-hospital, trauma care market. “From the front lines to behind the lines to the sidelines, our products treat the problem at hand fast and effectively…”

Recently they’ve released a handful of new products on the market and I was lucky enough to receive a few of the XT TQs. Thankfully, I’ve not had to use one in a real world application, but I’ve tested them out extensively. I also brought it around my local shooting club that has members from all branches of the military, law enforcement, medical personnel, and regular Joes. Some of the big concerns where the plastic that SAM used in the buckle and other components, and the fact that you have to pull in a different plane than others. With those concerns, no one was able to break the plastic buckle(or other components), and after showing someone the correct way to pull(against the buckle, not perpendicular) everyone got it after the fact. Additionally, it was very intuitive to use by people who’ve never had TQ training.

What sets the SAM XT TQ apart from the rest of the herd is the Truforce Buckle. It’s a special buckle that releases forks to hold the tourniquet strap in place, and not allow it to loosen while you're securing the rest of the strap to itself. Slack in the strap is the leading cause for tourniquet failure, resulting in loss of life. With the Truforce Buckle, it secures the strap at a preset circumferential force, and allows you to use fewer windlass turns to fully tighten and cut off blood flow. Once it’s tight, you secure the windlass in the C-hooks, and lock it in the a velcro time band.

As with all tourniquets, they recommend you get one for training and one for use in your kit. As it falls in line with the price of other TQs, you should take a look at your concerns and consider this for your kit. I know I’ll be keeping one with me.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Stopping extremity blood loss due to trauma

Target Market:

MIL/LEO, anyone who owns a gun, car, chainsaw, etc.

FNBs (Features & Benefits of this product):

  • Auto-lock Buckle
  • Metal Windlass
  • Windlass C-Hooks
  • Meets MIL-STD 810G

What other aesthetic options or finishes are available?

Available in Civilian Orange and Military Black.

What others are saying?:

Only 2 reviews were founds at the writing of this article, they’re from amazon.

★★★☆☆ Good functionality, but very steep learning curve.

★★★★★ Even better than the CAT.

Price point:

MSRP = N/A SAMXT.com

Retail = $37.99 Boundtree (preferred distributor)

$36.96 Amazon

$37.95 Rescue Essentials

I need it now! Availability:

For speedy results, the best bet would be to buy it on amazon.

Our Rating:

Pros:

  • Auto locking buckle

  • Metal Windlass

  • Circumferential range: 5.5in - 35in

  • MIL-STD 810G Proven

Cons:

  • Plastic components

  • Additional training required (as with all different TQs)

Score: 8.5 Great

90.jpg

2A Armament Aethon Rail

  Since everyone has an AR15, or at least should, aftermarket accessories for them have become the norm. That brings us to 2A Armament. They produce a variety of products, including complete rifles, for the AR15. 2A sent me one of their 7" Aethon rail handguards with M-Lok slots.

  The Aethon rail has some interesting design features. The first one I noticed was the scalloped picatinny rail sections. Of course this helps to reduce weight, but also looks very nice. The Aethon features a full top rail, that lines up with the receiver nicely. Under the top picatinny rail there are lightening holes, which also help vent heat away from the barrel. At 90°, 180°, and 270° are the flats with the M-Lok slots. Since this is a 7" handguard, there are only 2 slots per side. In front and behind the M-Lok slots are holes for QD mounts! Between the flats on the handguard, 2A has reduced more weight by milling out an angled half circle style design. Also the top picatinny rail has "T" markings on it.

  Installation of the Aethon rail is pretty straight forward. I'll run you through the simple method. After taking off the old parts. Just install the 2A Armament titanium barrel nut per specified torque, line up one of the cut-outs for the gas tube and the barrel is tightened back on. I used my armorers wrench and it worked just fine. Now here is one of the niceties of the Aethon. To install the handguard, you just slide it over the barrel nut and align the top rail with your receiver. Then you just tighten down the four angled set screws, 2 per side, and your done. The way the barrel nut is designed, along with the angled set screws, is what makes this so easy. A warning, do not over tighten the set screws as they are going into aluminum and could possibly strip out fairly easy. I just put blue threadlocker on them and called it a day.

  The Aethon rail saw plenty of use. Partly because the rifle I installed it on, wasn't working properly. This had zero to do with the Aethon. I will say that because of the small internal diameter of the Aethon, it does get very warm when shooting quickly, so much that I wouldn't recommend it for a registered full auto, unless you always wear gloves. Other than that, the Aethon performed great. I liked the smaller diameter of the Aethon, it allowed me to get a good grip around it to help reduce muzzle jump. If you have really large hands, you could probably wrap them all the way around this handguard. Because this is a 7" handguard, it is very sturdy with no flex whatsoever. There are also no sharp edges anywhere, even where the set screws lock the handguard on. My only complaint is that it only measures 6.7" long instead of 7", leaving a little gap between the end of the handguard and the fixed front sight post. 

  2A Armament has done an excellent job with the Aethon handguard. It is a deep black anodizing, so much that it is much darker and shinier than my receiver. It is fairly lightweight and installs easily. If your in the market for some nice AR parts, go take a look at 2A Armament.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight AR15 handguard

Target Market:

Users wanting a lighter weight, or M-Lok handguard

FNBs (Features & Benefits of this product):

  • Made in U.S.A
  • U.S.A. sourced 6AL-4V Titanium barrel nut
  • M-LOK mounting solution
  • Free floating design
  • QD mounts on both ends
  • 1.3” Internal Diameter
  • 6.7" length
  • "T" markings
  • Weighs 6.2 oz's complete

What other aesthetic options or finishes are available?

10", 12", and 15" lengths

What others are saying?:

None Found

Link to other reviews:

None Found

Price point:

MSRP = $179.00

Retail = $170.00 at Optics Planet

I need it now! Availability:

2A Armament or Optics Planet

Our Rating:

Pros:

  • M-Lok

  • Easy Installation

  • Dark Anodizing

  • Small overall diameter

  • Full top rail

  • QD mounts

Cons:

  • Not a full 7" in length

  • Gets hot

Score: 8.0 Great

80.jpg

 

Favorite Link:   Poly Gun Mods

 


 

TandemKross Halo Charging handle

  If you have been around certain types of handguns, like the Ruger MK series, you know how hard they can be to cycle by hand. This brings us to the "Halo" charging ring by Tandemkross. The Halo is a nifty device that clamps on your existing charging handle/slide. Tandemkross sent me the Halo for review. It is one of the few made for the square style bolt on the earlier Ruger 22/45 and MKII's.

  When you first get the Halo, you notice that it is a real simple design. It is basically a squared off ring with a slot and a bolt. Simple yes, but more importantly is the function. Once I mounted it up, I immediately found it easier to cycle the bolt. All you have to do is put a finger inside the loop, and pull back, then let go, and your done. I had my whole family try it, and they all said it was way easier and more intuitive. I was also told it made the 22/45 look like a space gun.

  Of course I was also worried about adding weight to the bolt. After trying everything from sub-sonic to hyper-sonic .22lr shells, I put that thought to rest as everything functioned great! Now on the other hand, I was a little disappointed the the inside of the Halo ring was squared off. It digs into your joint a little when using it. If Tandemkross were to round the inside, it would be much more ergonomic. I wasn't the only person who thought this either. With the Halo installed, you can cycle the bolt the same way as before, if you want, but with the added benefit of the tabs sticking out farther than standard.

  Everything needed for the installation is included. Basically the screw and allen wrench. To install the Halo. Just slide it down over the cocking serrations/nubs. Install the screw, and tighten it down. I put some blue threadlocker on the screw, just in case. One thing to note, you can put the Halo on upside down. Yes, I did this, and it does still function fine. But put the writing so you can read it, and that is the correct way to install it.

  The Ruger series of pistols is not the only ones that Tandemkross makes the Halo for. Some of the others look a little different, but function the same. So if you are having a problem racking the slide, or know someone that is, you might want to look into the Halo series of charging handles. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Easier to use charging handle

Target Market:

Shooters wanting a quicker, larger, and easier to use charging handle

FNBs (Features & Benefits of this product):

  • Pull Ring Design

  • Ease of use

  • Ambidextrous

  • Lightweight

  • Anodized

  • Made in U.S.A.

What other aesthetic options or finishes are available?

Black only, but available for other firearm models

What others are saying?:

Jon @tandemcross: 5/5 stars

Ruger 22/45 Lite Halo

This has to be one of the best upgrades for the Ruger 22/45. I got this for my wife because she has a hard time pulling back the bolt with her small hands. The halo ring makes it simple and easy for her to rack the bolt with just one finger. I also like how secure it is on the bolt, just a dab of blue loctite on the screw and its not going anywhere. Lastly, I believe the extra weight of the halo on the bolt helps cycle the gun better which is an added bonus. I would definitely recommend this upgrade for people who have trouble pulling back the bolt on their Ruger pistol easily.

Link to other reviews:

AmmoLand

Price point:

MSRP = $44.99

Retail = $42.99 at Brownells

I need it now! Availability:

TandemKross or Brownells

Our Rating:

Pros:

  • Easy to use

  • Weight doesn't induce malfunctions

  • Model availability

  • Easy Installation

  • Made in U.S.A.

Cons:

  • Squared Off (Not Rounded)

  • Only available in black

Score: 8.0 Great

 

Chad’s Favorite Link:   AR15 Podcast

"Game Changer" .22lr Compensator from TandemKross

  Compensator's for small caliber handguns can seem pointless to some. After all, .22lr doesn't have much recoil. But, I tend to believe that all calibers benefit from reduced recoil and muzzle rise. I tend to think TandemKross feels the same way I do. After all, they did send me the Game Changer comp to review.

  I installed the Game Changer on my Ruger 22/45 MKII. The barrel had been previously threaded to the 1/2-28 that the compensator is designed for. So I installed the supplied O-ring that they use as a type of crush washer and seal. Then screwed the Game Changer on and aligned the top holes up.  There is some resistance once the O-ring starts getting pressure on it, but it isn't a lot. This compensator does not have bottom holes/vents. I prefer this to other styles that have vent holes all the way around the compensator. 

  So it is time to tell my experience with the Game Changer. I originally thought the name was a little boisterous, but then I shot it. This little compensator does a great job of reducing the recoil. Since it didn't have much to start with, it took it down to almost nothing! But that's not all, it also reduced the muzzle rise. On a side note. While at a steel challenge match, I was talking with a guy who had been using the Game Changer for a couple of years in rimfire open class. He told me it was his favorite comp. So I am not the only one that likes it. Also when shooting the comp, you can actually see the gases coming out the sides and top. I did not notice it being any louder than without it, but it is only a .22, so it is not like a large caliber with a compensator.

  The Game Changer is constructed out of anodized aluminum. It has 4 holes in the top and 4 slots on each side. TandemKross says it has large ports for easy cleaning, and yes, you can get in there to clean out the lead and powder junk. As usual, it has 1/2-28 threads, the standard for rimfires. But there is one thing I don't like about the comp. It has a 1" diameter, so it is larger than the 22/45's barrel, and would also be larger than a 10/22 bull barrel. It is just cosmetic, but it would be nice if it was the same diameter to give firearm a smooth look. At 1.75" long, it is not really long either. It will also fit just about any .22lr that has 1/2-28 threads.

  After shooting the Game Changer a bunch. I've concluded that it lives up to the name. So if you are looking for an "actual" compensator, not just a diffuser, go look at TandemKross. They pretty much are a one stop shop for anything .22lr, not just products for Ruger's. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

.22lr compensator to reduce felt recoil and muzzle rise

Target Market:

Shooters wanting less muzzle rise to get back on target faster

FNBs (Features & Benefits of this product):

  • Reduces Muzzle Rise

  • Large openings for ease of cleaning

  • Standard 1/2"x28 Threads

  • 1" Outside Diameter

  • 1.75" Long

  • Black Hardcoat Anodizing

  • Made in U.S.A.

  • Lifetime Guarantee

  • Fits: 
  • Ruger Mark III
  • Ruger Mark III 22/45
  • Ruger Mark III 22/45 LITE
  • Ruger Mark IV 22/45 Tactical
  • Ruger Mark IV 22/45 LITE
  • Ruger SR22
  • Ruger 10/22
  • Ruger 22 Charger pistol
  • Browning Buck Mark
  • GSG 1911-22
  • Savage Arms Mark II TRR-SR
  • Walther P22
  • SW22 Victory (2016)
  • Smith & Wesson M&P®22 Compact
  • Smith & Wesson M&P®15-22P pistol

What other aesthetic options or finishes are available?

Black, Branded (has TK Logo), Tandemized (#tandemized on side)

What others are saying?:

Keith @tandemkross.com: 3/5 stars

It's O.K.

Does help with speed of follow up shots. However leading causes accuracy to drop off rapidly.

Jason @E. Arthur Brown: 5/5 stars

Works great on my 22/45

Threaded on great, came down to the right amount of force to snug it on and sits flush with the ports lined up exactly straight up on the top. Definitely can hear the shots, almost louder than before. It seems to tame the already small recoil down even more.

Link to other reviews:

Spotter Up Review

Price point:

MSRP = $34.99

Retail = $34.99 at Brownells

I need it now! Availability:

TandemKross or Brownells

Our Rating:

Pros:

  • Reduces recoil

  • Reduces muzzle rise

  • O-ring seal

  • Price

  • Made in USA

Cons:

  • Diameter Size

  • Only Available in Black

 

Score: 8.0 Great

 

Chad’s Favorite Link:   Axelson Tactical

GunTec AirLite Minimalist AR15 Stock

  A little bit ago I did a review of the GunTec Air Lite handguard. Well, they were also kind enough to send one of their AirLite stocks for review also. This is GunTec's minimalist AR15 stock.

  The first thing you will notice about the AirLite stock is how good it looks. It is basically a buffer tube, with spiral fluted cuts down the tube. Then it has a textured aluminum buttplate attached with a clamp system. Also supplied is a rubber buttpad that slips onto the buttplate, a nice touch if you don't like the textured plate, plus it adds another 1/4" of pull to the stock. The stock in only 9" long when attached, which is a little short for me, and thus gives the rifle about a 12" length of pull total. Guntec does offer another minimalist stock with a 1" longer length. I didn't have any trouble shooting the rifle with the shorter length, and since this is their "Lite" offering, I can only speculate that this is how it is suppose to be. The stock would be really nice on a SBR build if you wanted a fixed stock.

  I was really impressed by how sturdy the AirLite stock is. Once mounted, it doesn't flex at all, and gives a nice sturdy shooting platform. With adjustable stocks, I always seem to feel a little bit of movement under recoil. Being that this is a fixed stock, I don't get that "feel." The buttplate is also adjustable for cant. So once the stock is installed, loosen the clamp bolt and twist the buttplate to the desired location and tighten the screw back down to clamp it in place. I like this feature because you can set the stock to fit your shoulder pocket, not just straight up and down like most stocks.

  Now we can get onto some of the specs. The stock comes complete with a castle nut, an ambidextrous single point sling plate, 3 ounce carbine buffer, and chrome silicone recoil spring. The whole thing is made from 6061 aluminium. It weighs in at 9.3 ounces on my scale, without the spring and buffer. My mil-spec buffer tube and M4 style stock weigh 11.8 ounces on my scale. So your saving 2.5 ounces over a stock M4 by choosing the Guntec AirLite stock.

  As I said in the handguard review, If your looking for some good AR products, go check out GunTec. This Minimalist AirLite stock is a nice usable piece of equipment for your AR15.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight Minimalist AR15 stock

Target Market:

AR15 users wanting a lightweight fixed stock

FNBs (Features & Benefits of this product):

  • Minimalist Design

  • Spiral Fluting

  • All 6061 Aluminum

  • Textured Buttplate

  • Additional rubber buttpad

  • Lightweight at 9.3 ounces

  • Includes buffer, spring, sling plate, and castle nut

  • Adjustable cant of end plate

  • Made in U.S.A.

What other aesthetic options or finishes are available?

O.D. Green

What others are saying?:

Bigdude @Guntecusa.com 5/5  stars

I purchased this stock for a lightweight .22lr build. The stock fit great, LOP is good and it looks great.The buffer tube and stock weigh 8.09 ounces by my measure (that does not include the weight of the end plate, castle nut, spring or buffer). This kit comes with buffer tube, stock, slip-on butt pad (use is optional), buffer, spring, castle nut, end plate and hardware. I would definitely purchase this kit again for other lightweight builds.

Link to other reviews:

None Found

Price point:

MSRP = $119.95

Retail = $84.95 @VTSupply.com

I need it now! Availability:

VTSupply.com

Our Rating:

Pros:

  • Lightweight

  • Comes complete

  • Adjustable end plate

  • Nice looking

Cons:

  • No Instructions

  • Short length of pull

Score: 8.0 Great

 

Chad’s Favorite Link:   Axelson Tactical

 


 

Black Iron "ALLY" IWB Holster

  Any one who has considered the idea of carrying a firearm for protection, has had to look into holsters. Almost always, this ends up with a drawer full of unused holsters. The people over at Black Iron Holsters have made the job of choosing a holster a little bit easier with their ALLY series of inside the waistband (IWB) holster.

  The Ally IWB holster is one of the most comfortable holsters I have worn. I am not sure exactly how to describe the ALLY, but think hybrid holster on steroids. The first thing you notice on the holster, is the padding on the back, or the side that rides against your body. This padding is an UnderArmor moisture wicking fabric sewn over perforated padding and then mounted on the flexible kydex core. The padded fabric is said to pull sweat away from the body and make for a cooler drier holster. I did notice that I didn't sweat as much on the holster backing when it was hot outside. But the holster did seem to feel warmer than some other types. The ALLY also doesn't seem to feel cold either, like some all kydex holsters do. 

  When they construct the holster, they use the above mentioned padding, but with some extras. They call it C-Pak. C-Pak adds in a flexible kydex core, 500 denier Cordura fabric, and the moisture wicking and padding mentioned above. All of this helps add to the comfort and usefulness of the holster. The whole holster, except the backing, has been wrapped in the Cordura nylon. This cordura wrapping actually reduces the effects of holster wear on the firearm by giving the firearm something besides the kydex to rub on. They also sew on a border around the whole holster. This border helps smooth the outer edges so that nothing can catch on the them.

  When I mentioned hybrid style on steroids, here is what I mean. The holster is constructed with a large backing plate and then the outer holster is attached to it. But all of this is wrapped as mentioned above. They also put in a tension adjustment screw so that you can adjust it to your preference. The backing on my supplied holster has 3 holes for each clip, it has a front and rear clip. These holes make it possible to adjust for ride height and cant. Also the supplied nylon clips have 2 mounting screw options for even more adjustment. Even with the clips mounted in the same holes on the backing plate, the cant of the firearm is pretty noticeable. I did have a problem with the screws, that the clips are mounted to, coming loose. I put thread locker on them, but got some on the nylon clips. DON'T get threadlocker on the clips, it might make them crack and break like in my case. I emailed Black Iron and told them what I did, within a few days they had sent me new clips. I was just going to use some others I had around here since it was my fault they broke. So a big +1 for customer service.

  Aside from this being a very comfortable holster, it is also very functional. This holster has a little bit of break in time associated with it, like 2-3 days. After that, I didn't really even notice it. One of the great features of the ALLY is that the holster mouth doesn't collapse when the pistol is removed. Thus making reholstering safer and easier. Holstering the pistol was a little strange at first, I kept wanting to here the audible click like most hybrid or kydex holsters. But it felt more like an all leather holster. Don't be worried about this holster printing either. It has a very smooth profile. I did notice that it is slightly thicker than some holster due to its padding and cordura, but the smooth profile made up for this. It is hard to notice this holster being worn. I usually only hide it under a T-shirt and that works well.

  Now, the ALLY comes in the four different fabric colors listed below. But don't fret, they seem to make this holster for just about every popular, and even other not so popular handguns. Also with options for various weapon lights. If they don't list your handgun, their website says to contact them, which makes me think they will do their best to help you out. So if your in the market for a nice IWB holster, give Black Iron Holsters a look. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Soft/Comfortable Inside the waistband kydex holster

Target Market:

Concealed Carriers

FNBs (Features & Benefits of this product):

  • C-Pak Backing
  • Cordura wrapped
  • Hand washable
  • Made for each individual firearm
  • 1.5" clips
  • Adjustable for ride height and cant
  • Tension adjustment
  • Breathable
  • Flexible
  • Cerakoted hardware
  • Made in U.S.A.

What other aesthetic options or finishes are available?

Coyote, Multicam, and Multicam Black

What others are saying?:

Great Holster, Buying More: Roger from BIH 5/5 Stars

I received my holster 2 weeks ago and this is by far hands down the greatest holster i have ever used. It fits like a glove both on myself and for my glock. It is everything described and more, i am a delivery driver and spend the majority of the time on the road getting in and out of my truck. I can honestly say by the end of the day it was so comfortable i completely forgot i was wearing it by the end of my shift. I will be swapping out my Alien Gear holsters for my other two guns and will be ordering everything from you guys from now own. Its well worth the few extra bucks for something that is of this quality.

Great Products and Service: Timothy from BIH 5/5 Stars

First of all let me say that my experience with customer service was exceptional, I had a lot of questions concerning which style of holster to purchase and what was going to work for me. The staff at Black Iron was very knowledgeable and evidently knew what questions to ask and how to explain things because this is the best fitting and most comfortable holster i have ever worn. If you have any doubts about buying one don't you will be blown away by these things.

Link to other reviews:

Nothing found while googling

Price point:

MSRP = $79.95

I need it now! Availability:

Black Iron Holsters

Our Rating:

Pros:

  • Comfortable

  • Holster mouth stays open

  • Flexible

  • Adjustable retention

  • Tuckable

  • Adjustable Cant and Ride height

  • Firearm options (lights, lasers, models)

Cons:

  • Sewing of fabric looked poor (Not straight)

  • Slightly thicker

  • Clip mounting screws come loose (Maybe supply pre-threadlocked screws)

 

Score: 7.5 Good

 

Chad’s Favorite Link: U.S. Tactical Supply  

 

 

 

Guntec 15" Air Lite Handguard

   As one can probably guess, this is about Guntec's new 15" Air Lite handguard for the AR15. I received the handguard about 2 months ago and have been using it ever since. Guntec has been around since 1989. They make tons of accessories for AR15's, AR10's, AK's, and even more. 

Shown with an extra M-Lok rail on bottom and a rubber M-Lok cover

  The Guntec hanguard that I received was in M-lok. For you keymod fans, they make them also. Now the first thing I would like to mention is how thin the handguard is. If you like them thin, you'll love this handguard. It measure 1.5" wide, 1.975" tall, and has an inside diameter of 1.34". It also has a built in full length top picatinny rail. I will mention that although it is M-Lok, it only has 3 m-lok slots each on the sides and bottom, toward the very front of the handguard. This would be 3, 6, and 9 o'clock.  The rest of the handguard has cut out triangle patterns to reduce weight. 

  Now, this Guntec handguard is light. On my scale, it weighed in at 9.6 ounces complete with barrel nut and screws. Remember, this is a 15" handguard with a full top rail, so this is quite good. The barrel nut is also aluminum, which helps with the weight. 

  Installation of the Air Lite was pretty straight forward. Which is good since it didn't come with any instructions. Once all your old parts are off. Slide the barrel nut on and tighten as normal. If the screw holes that hold the handguard on don't line up, remove it and put one of the supplied shims in it and try again. My kit came with 4 shims, I only had to use 1 to get the holes to line up. Guntec also lists a crowfoot wrench for the barrel nut, buying the wrench will make life much easier. Next install the gas block. I only mention this because you will need a low profile one, and smaller is better in this case. Then slide the handguard on. Line it up. Then install,  and tighten down, the supplied screws. Thread locker is probably a good idea. And as always, safety check the rifle when finished. 

  Depending on where the gas block is located, you might run into some accessory mounting problems. Since the handguard is so thin, the screws on the m-lok parts may run into the gas block. On a mid-length or rifle length gas system, one set of m-lok attaching slots will not be usable. The inner part of the handguard is just too close to the gas block. Cutting down the screws won't even work. If you run a carbine or shorter gas system, you won't have this problem.  

  After shooting this handguard, here is what I found. Being that it is very thin helps if you shoot thumb over bore, or if you have smaller hands (think children). I did notice that it heats up faster than some of my larger diameter handguards, but really this is only a problem after 3 or 4 30rd mag dumps. It has no sharp edges and is flat on the end so it doesn't get caught up on stuff. It is not what you want if you plan on putting a suppressor under it (too thin). It is quite sturdy. And it comes with rubber m-lok inserts. 

  If you are looking for a light handguard, this Guntec might be for you. I would like m-lok slots all the way down, which they make, just not in the Air Lite version. The price is reasonable. It looks good and even comes in many different colors. Go check out Guntec, they probably make an accessory for you. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

15" really light AR15 handguard 

Target Market:

AR15 owners wanting a thin and/or light handguard 

FNBs (Features & Benefits of this product):

  • T6 Aluminum Body
  • Proprietary Lightweight Aluminum Barrel Nut Included
  • Total Weight Including Barrel Nut Is 8.9 oz. I measured at 9.6 ounces
  • 3 M-LOK Slots On 3 Sides of Front End Of Handguard 
  • Triangle / Diamond Cuts Throughout Handguard to Reduce Weight
  • Rail System Slides Over Barrel Nut , And Is Locked Up Against Receiver With 6 Screws
  • Monolithic Top Rail
  • 15" Length
  • Internal Diameter: 1.34"
  • Outside Diameter: 1.50"
  • Made in USA

What other aesthetic options or finishes are available?

KeyMod, Red, O.D. Green, F.D.E., and Blue

What others are saying?:

Google did not find anything

Link to other reviews:

We Like Shooting review of the 12" std handguard

Price point:

MSRP = $129.95

Retail = $111.71 at OpticsPlanet

I need it now! Availability:

Optics Planet, GunTec USA only sells to dealers 

Our Rating:

Pros:

  • Lightweight

  • Sturdy

  • Complete top rail

  • Small Diameter

  • Free Float

  • Made In USA

  • Great Price

  • Multiple Color Options

  • Rubber M-Lok "covers" included

Cons:

  • No Instructions

  • Only M-Lok slots are at the front

  • No QD attachment points

  • M-Lok screw run into gas block

Score: 8.00 Great

Chad's Favorite Link: U.S. Tactical Supply

 

STYRKA S7 2.5-15X50 RIFLESCOPE

   There is a new optics manufacturer, that should be on your watch list. It is called Styrka, pronounced Steer-Ka. Being new to the market, I had not heard of them until a few months ago. They offer riflescopes, binoculars, spotting scopes, and red-dots. They sent me a riflescope and a reddot, today we will discuss the S7 2.5-15x50 riflescope. 

Tree at about 400 yds

  When I first received the scope, I noticed all the nice little extras that came with it. Probably my favorite accessory is the scope cover that is in the box. The neoprene scope cover does a nice job protecting the optic when it isn't being used. Also included is a lens cloth, one of the nice ones that you shove back in its holder when not using it. A battery is also supplied for the illuminated reticle, it's a CR2032, so pretty standard.

  I mounted the Styrka on my Savage that is mounted in the MDT chassis reviewed earlier. This scope has really clear glass. Styrka states that the S7 has blackened edges on the lenses to reduce glare and enhance image contrast. Images come through clear with no distortion around the edges, so I guess it works as advertised. The S7 is their "top of the line" scope and has Styrka's SXL-MAX optics coating to reduce glare, add light and color transmission, and give optimum clarity. I used it in low light and some pouring down rain. The scope remained clear out to about 400 yards during this, probably farther, but I couldn't test any farther where I was at. It is also waterproof, fog proof, etc. 

  The S7 2.5-15x50 they sent has an illuminated mil-dot reticle. The illumination is the typical red offered by just about everyone. Styrka also offers this scope in an illuminated duplex reticle, and a non illuminated BDC reticle. Even in all but the brightest days, the illumination is visible. The illumination has 6 brightness settings with an off position between each setting. I really like this feature for the simple fact that it only takes one click to get you to the brightness that one usually uses. The brightness knob is located on the left side, on the end of the parallax adjustment knob, along with the battery compartment. This makes the combination stick out farther then some other scopes, just something to note. The adjustment turrets are capped. Since the S7 is a hunting style scope, this made perfect sense. However, under the caps are some fairly nice target style turrets. These use the standard 1/4 MOA click adjustments. The turrets also can be reset to zero after you have sighted the rifle in. To do this, just loosen the top of the adjustment with a coin, pull the knob up, set to zero, push knob down, and tighten the screw. The turret clicks are extremely crisp and clean, which is a nice touch. 

  One thing I noticed about the S7 is the length. It is longer than I expected for a scope in this zoom range. It is not a problem, just something to consider if mounting it on a short rifle. The scope has a second focal plain reticle, so in order to use the mil-dot, you must turn the zoom all the way to max power, in this case 15x. Don't worry, the scope is quite clear at the full setting. I was really hoping for a first focal plane, but you can't have everything. 

  I really like this range of this scope. At 2.5x, it is low enough magnification to take shots extremely close. Then at 15x, it can still take long shots. I am really glad that Styrka let me try this S7 out. It is extremely clear, easy to adjust, has a lifetime warranty, and you can send it back every year for a free tune up. Give Styrka a look if you are in the market for a nice hunting scope. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Hunting scope with Illuminated Mil-dot reticle

Target Market:

Hunters, Target shooters

FNBs (Features & Benefits of this product):

  • SXL-MAX Fully Multi-Coated Optics
  • 30mm 6061-T6 Aircraft-Grade Aluminum Tube
  • Side Focus Parallax Adjustment
  • Illuminated Reticle
  • Blackened Lens Edges
  • 100% Waterproof
  • Nitrogen Purged
  • Fast Focus Eyepiece
  • 50mm Objective Lens
  • 3.94" Eye Relief
  • Weight of 23.7 ounces
  • (LxWxH) in inches 13.69x3.09x2.37
  • Lifetime Warranty

What other aesthetic options or finishes are available?

Standard Illuminated Plex Reticle

Ballistic Drop Reticle (BDC)

What others are saying?:

5/5 stars @ OpticsPlanet

Above and Beyond

This scope has performed beyond my expectations. Everything seems well thought out. Love the simple reticle. Holds zero flawlessly and turrets are silky smooth. Well worth the cost of admission. Feels like some of the much more expensive European scopes.

5/5 stars @ Amazon

Outstanding Glass

When delivered, mounted on a S& W M&P 10 .308 with Burris high rings.
Using a laser boresight at 30 yards, scope was within 1/2 inch horizontally and one inch low vertically. Closest I have ever had one from the factory. Glass is clear, adjustments are precise and accurate, and above all east to work with, especially parallax adjustment.
Have fired at ranges to 200 yards, so far, with no loss of accuracy after 400 rounds.
Highly recommend it for a mid priced scope.
Will purchase another for a 5.56.

Link to other reviews:

None to be found

Price point:

MSRP = $814.95

Retail = $679.00 @ Shop Styrka

             $679.00 @ Amazon

I need it now! Availability:

Styrka or Amazon

Our Rating:

Pros:

  • Extremely clear for the price

  • Precise turret clicks

  • Reset to zero turrets

  • Turret caps

  • Illuminated reticle

  • Off setting between each illumination setting

  • Neoprene scope cover included

  • Warranty

Cons:

  • 2nd Focal Plane Reticle

  • Parallax and brightness knob stick out pretty far

  • Poor battery life (Battery died after 1 month of being left on brightness position #4)

  • Length of entire scope is almost 14"

Score: 8.00 Great

 

Chad's Favorite Link: Veterans FOB

 

Axelson Tactical TALON muzzle brake

  The AxeTac TALON muzzle brake is made by Axelson Tactical out of Nevada. If you recognize the name it might be because the company was started by the brother of Matt "Axe" Axelson of Lone Survivor Fame.  They have brought out a number of products for AR-15 type rifles, along with their AXE series complete rifles.

  I have put quit a few rounds through the TALON brake they sent me. I also have shot a couple of the AXE rifles with them installed. The brake does an excellent job of reducing felt recoil, not that a 5.56 AR has much recoil. But what I was most impressed with was its ability to keep muzzle rise to almost nothing. It was easy to get accurate double taps, shooting off hand, at a 24" steel target at 200yds. This was with a 16" barrel and a red dot optic.

  The AxeTac TALON is sold as a muzzle brake, but it really is more. It is noticeably louder than a standard A2 flash hider, but not as loud as my 3 port comps that direct the blast out the sides. The TALON also does a great job as a flash hider, keeping the flash contained within it. And as a compensator it also does an excellent job. It will still allow some of the blast to go forward, but it doesn't seem to hurt its effectiveness as a comp. I ran the TALON on a 16" and an 11.5" AR. Yes, it worked better on the 16", but it worked quite well on the 11.5" also.

  Now onto the technical stuff. The TALON has 3 small slots, 1 facing up, and the other 2 facing the sides but slightly lower than 90 degrees. It also 2 large ports between the small slots. And 3 open ports at the end spaced evenly. The bottom is mainly closed except for the port at the end of the muzzle. Also on the bottom is the Axelson Tactical logo. The brake is 0.940" in diameter, and 2.5" long, not counting the crush washer (which is included). There are also flats to fit your standard muzzle device tools or a 3/4" wrench. It is made from stainless steel, heat treated, and then black Melonite coated. It is threaded the standard 1/2"-28.

  I would not hesitate to install one of these on another rifle. The finish is excellent. It does a good job at being a comp, brake, and flash hider. It's made in the USA. If you are looking for a good all around muzzle device, check into the Axelson Tactical TALON muzzle brake.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

AR-15 Muzzle Brake, Compensator, and Flash Hider all in one.

Target Market:

Shooters looking to mitigate recoil.

FNBs (Features & Benefits of this product):

  • Reduces felt recoil

  • Reduces muzzle rise

  • Reduces flash

  • Made from stainless steel

  • Melonite coated

What other aesthetic options or finishes are available?

None

Link to other reviews:

Google was not my friend and I could not locate any

Price point:

MSRP = $94.99

Retail = $94.99 on Amazon

I need it now! Availability:

Axleson Tactical or Amazon

Our Rating:

Pros:

  • Reduced recoil

  • Almost no muzzle rise

  • Melonite coated

  • Stainless Steel

  • Made in USA

  • Includes crush washer

Cons:

  • Price

  • Longer than a standard birdcage flash hider

85.jpg

Score: 8.5 Great

 

 


Chad's Favorite: Patriot Patch Co.

Lone Wolf Dist Compact Timberwolf Frame Review

While attending the NRA Annual Meetings in April of 2015, I got to meet up with Zack, the marketing manager of Lone Wolf Distributors. I was really interested in their Compact Timberwolf Frame for Glock pistols. Through our conversation, Zack agreed to send me a fully built Timberwolf Compact pistol, which I have since purchased. This is part one of two, where I focus on the frame. Stay tuned for my review of the upper assembly, as well as a summary of the pistol as a whole.  20151024_180117-1

Lone Wolf Distributors has been manufacturing accessories and replacement parts for Glock handguns for many years. From slides, barrels, triggers, and more, you could almost build a custom Glock by just using Lone Wolf’s parts. The only thing missing was the frame, until somewhat recently. Lone Wolf saw the modifications that people generally made to their standard Glock frames, and decided to offer a lot of these modifications right out of the box, with their Timberwolf frame.

Common modifications made by end users to Generation 3 Glock pistols include backstrap reduction, frame texturing, adding extended magazine releases, and even removing material in key places to allow a higher grip on the handgun. Well, Lone Wolf Distributors took all of these modifications into consideration, when designing their Timberwolf frame. I will take a look at each of these aspects one-by-one.

Grip

20151024_180401

One of the biggest benefits to this replacement frame would have to be the grip. The Timberwolf offers two choices of backstrap to the shooter. The first is the slim grip. It is an incredibly short (front-to-back) grip that more closely matches the grip angle of the classic 1911. The second is a swelled backstrap. It is a little smaller in the hand than the standard Glock swell, which will come as a welcomed feature to many Glock owners. This setup happens to be my favorite of the two. As good as it feels, the smaller grip leaves the meat of my palm really close to the magwell, and it can actually get pinched in between the magazine base plate and the frame, upon reloading. Do this a couple of times, and it starts to get on your nerves. Luckily, the swelled grip fit me just as well, if not better, and Lone Wolf engineered the swap very well. To make the change, all you have to do is, with an empty gun, insert a flat tool into a slot that can be accessed through the magwell, and gently pry downward.

12170749_512874168870584_609558428_n

In my trials of the differing grips, I noticed an odd, but very well thought out (and well hidden) feature. Under the backstrap is actually a round recess that will hold one CR2032 battery, which is the somewhat industry standard for micro red dots. Alternatively, it can hold two CR2016s. This is a great feature if you’re building a race gun, or just want to carry a gun with a dot sight, and I am honestly a little shocked LWD doesn’t even list this in their feature literature.

The next part of the grip is the texture. Many people feel that the Gen 3 Glock grip is just too slick. I, for one, am in that boat. What the Timberwolf offers is a very aggressive square pattern, without being so harsh as to tear up your hands, with one exception. The edges of the frontstrap have slightly sharper corners than the rest. I suppose that is just a geometry issue of the curve meeting the corners of the texture, but it became very uncomfortable for the end of my pinky. That being said, it could easily be taken care of with a quick pass of some fine sandpaper, just to knock the edge off. Overall, the grip texture is very good at keeping the gun in your hands while firing. Speaking of the frontstrap, one feature many owners elect to remove on factory Glocks is the finger grooves. The factory finger grooves on a standard Glock 19 (Gen 4) actually happen to fit me perfectly, but I completely understand that there are so many different shapes and sizes of people. One good example for me was my Smith and Wesson Model 66. When I would attempt to get a high grip, the finger grooves would jam right into my knuckle, causing much discomfort, and forcing me to get a less that optimal hold on the gun. That is why it’s quite interesting that Lone Wolf decided to leave the finger grooves on their Timberwolf frame. But, to their credit, they reduced them down quite a bit, so if they don’t fit you well, it may not be the largest discomfort, when compared to a factory frame. I would still like to have seen them remove the grooves, though.

Moving up the grip, we have the undercut trigger guard. This is another common modification that allows you to get a much higher purchase on the pistol. To help with that, even further, they also designed the rear grip higher, and added a beaver tail, to remove the risk of slide bite. I have never personally had the web of my hand bitten by a Glock slide, but I have fairly small hands, and can see where it would be a problem to larger-handed shooters.

One last minor change I would like to see in the grip would be a slimmed down portion where the trigger finger rests on the frame, similar to that of the Walther P99. I feel like it would allow shooters with shorter fingers to more properly grip the handgun, and reach the trigger.

Magazine Release

For the longest time, people have been adding extended mag releases to guns, to make them easier to actuate. Lone Wolf, as well many other aftermarket parts manufacturers, offers extended releases. Lone Wolf even offers one that is wider than the factory, but it requires custom machining to make it work. When designing their frame, they decided to incorporate it right in, that way you don’t have to have it modified later. The wider release offers people with shorter fingers, like me, an easier to reach release without shifting the grip, as well as an easier to find release, which is good for everyone. As with the front strap, the corner of the magazine release can be a little sharp and annoying, if you’re performing repeated actuations, but, like I said previously, it’s not something a little swipe of sandpaper wouldn’t take care of.

20151024_180545

Another curious note on the mag release is that Lone Wolf didn’t make it reversible, like the Gen 4 Glock. That would be a nice feature, but seeing as how it was designed before the Gen 4 was released, I can understand the oversight.

Rail

20151024_180227

The final feature of the Timberwolf frame is the rail. Rather than using Glock’s proprietary rail, Lone Wolf decided to go with a Mil-Standard, three-slot, Picatinny rail. This allows users to select from a wider array of rail-mounted accessories, as well as move the placement forward or rearward, as they see fit. I did not attach anything to the rail, though.

 

Overall

The Timberwolf frame is very a very well thought out replacement for anyone that owns a Generation 3 or older Glock handgun in 9 Luger, 40 S&W, 357 Sig, and even 45 GAP. It is available in either the full-size (17, 22, 31, 37) or the compact (19, 23, 32, 38) frame sizes. The improvements offered by a good grip modification company could run well into the $4-500+ dollar range, whereas Lone Wolf offers many of these features at a fraction of the cost. If replacing a Gen 3 frame for a gun you already own, you could buy just the bare frame and use most of your existing Glock parts to fill the replacement. That is, with the exception of the mag release, since the Timberwolf frame comes with their proprietary release pre-installed. The bare frame will cost you just shy of $200, which is a steal, compared to grip work. If you do build your own frame, you should be aware that you will need to buy either a LWD Gen4/Timberwolf Trigger housing, or LWD Ultimate Trigger Stop Gen4, to replace your Gen 3 housing, as the grip is slimmer in the front-to-back dimension.

If you’re planning to build a whole new gun, or just want multiple lowers, Lone Wolf offers a pre-assembled lower frame for $330, which is only about $30 more than buying every individual part and installing them yourself. To save the hassle and time of potentially forgetting or losing a part, I would recommend just buying the built frame. But, if you want to add your choice of custom trigger, you could easily purchase the parts separately from the frame. Lone wolf makes this easy by offering an interactive schematic.

Another benefit of buying the assembled frame is that Lone Wolf adds a few enhanced parts. These enhancements include: LWD 3.5# connector, LWD 6# trigger spring, LWD Extended slide stop, and LWD Extended slide lock. The 3.5# connector and 6# trigger spring makes for a very smooth, and pretty light, trigger pull. This is a great upgrade over the factory Glock parts that I am glad Lone Wolf includes in the assembled frame. It provides a good trigger feel, without being obscenely light, so I feel it would still be suitable for carry. On my example, they even installed the smooth trigger that usually only comes with the full-size Glock handguns. I much prefer the smooth trigger, as the serrated trigger begins to wear at my trigger finger, during firing sessions. I’m not sure if this is the standard feature for the assembled frame, but based on my invoice, it seems to be. The Extended slide stop is useful if you are the kind of shooter that uses it to release the slide. It provides a much larger purchase area than the standard, so it’s easier to manipulate, but it’s not so large that it gets inadvertently hit. As far as the Extended slide lock (the two tabs in front of the trigger guard that you pull downward to disassemble the gun), I really don’t get the purpose of it. The tabs are a little longer than standard, but I’ve never had a problem using the standard Glock part. It’s an upgrade that I could take it or leave it, and be satisfied either way. It did, though, scratch the inside of my holster. That’s not too much of an issue with a plastic holster, but with leather, I’d be afraid of it causing premature wear on the holster.

In summary, the Lone Wolf Distributers Compact Timberwolf Frame is a great upgrade to your Gen 3 or older Glock pistol, or for building your own custom pistol. It is a great value compared to the expense and wait for frame modification work. Some of the features are addressed on the newer Gen 4 Glocks, but with the Timberwolf, the grip is still slimmer (front-to-back) than the OEM. You also wouldn't get the undercut triggerguard, raised and lengthened beavertail, and reduced finger grooves.

At the time of writing, the assembled frame is available for only $234.95 (prices subject to change), and it even comes with Lone Wolf's excellent Ultimate Adjustable Trigger. This is a promotional price for the UAT, and I do not know the timeline for when it will go back to normal, so if you'd like an assembled Timberwolf frame, I would jump on it as soon as possible. The UAT is normally a $50 upgrade, so you are basically paying for the frame and the assembly labor cost, and getting all of the internals for free!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Replacement frame for generation 3 and older Glock handguns

Target Market: Concealed carriers and competitive shooters

timber

FNBs (Features & Benefits of this product):

  • Improved ergonomics over Glock OEM frame
  • Full-spec 1913 accessory rail
  • Higher grip angle
  • Extended beaver tail
  • Rounded trigger guard
  • Round/extended mag release
  • Improved Checkering
  • Quick change grip panels (2 total)
  • Spare CR2016 battery storage in grip panel
  • Improved trigger over Glock OEM (standard in assembled frame)
  • Extended slide lock lever (standard in assembled frame)

What other aesthetic options or finishes are available?: Currently, the Timberwolf frame is only available in black.

What others are saying?:

“The Timberwolf pistol is of particular interest to the small-handed shooter, or to the user who says “I love everything about the Glock but the grip angle,” or the handgunner who just likes to be able to get lots of finger on the trigger and lots of flesh and bone around the “handle.” It’s definitely worth a look.” - Massad Ayoob, Daily Caller

“But the Not-A-GLOCK feels terrific in the hand. No really. Like many, but not all shooters, I find it difficult to come to a natural point of aim with a standard GLOCK. What’s more, the grip angle puts my hand and wrist out of the line that gives me stability. The Compact Timberwolf’s grip is, for me, vastly improved. I can get a high hold on the gun and put all of my fingers on the handle. It boasts a fairly small diameter grip, with good holding surface. I can get a natural point-of-aim and a solid one-hand grip, right or left.” - Jon Wayne Taylor, The Truth About Guns

Price Point:

  • Bare = $199.95
  • Built = $329.95
  • Built with UAT = 234.95 (Limited time offer)

I need it now! Availability: You can get the Timberwolf Compact Frame directly from Lone Wolf, and a few online retailers, but once you spend a few minutes on the LWD website, you’ll most definitely want to pick up some of their other great products, like their Glock Magazine Disassembly tool.

Our Rating:

Pros:

  • Greatly improves ergonomics
  • Interchangeable grip panels
  • Offers many common custom options
  • Improved grip texture to provide better traction
  • Available as a bare frame or built to LWD’s preferred specs
  • Built frame has improved trigger
  • The ability to build any caliber offered by Glock on this frame size (19, 23, 32, & 38)
  • You can even build it as a “Long-Slide Compact” by using a factory full-size upper (such as a G17), or Lone Wolf upper, and purchasing Lone Wolf’s Slide Adapter, which fills the gap between the front of the 17 slide and the 19’s dust cover.

Cons:

  • Still has finger grooves (though they are greatly reduced)
  • Mag release is not reversible to left-hand operation

Score: 9.090

 

 

Visit the Firearms Insider Facebook page for alerts on new reviews, and updates on the show.

Firing Line Review

 

 

Adaptive Tactical Venom-SE Magazine Conversion

AT1 The Adaptive Tactical Venom-SE is a magazine conversion kit for for Mossberg 500 and 590 shotguns in 12 guage.  The complete kit comes with a new forend with the magazine adapter, a pistol grip adjustable stock, and either a 10 round box magazine or a 10 round drum magazine.  Adaptive Tactical sent me the multi-cam kit with the "Wraptor" forend, 10 round magazine, and pistol grip adjustable stock. The offerings from them are available in a variety of patterns. The kit only works with 2 3/4" shells. Because the kit puts the magazine in front of the standard loading gate, it causes the user to have to put their support hand farther out, so some users may have trouble cycling the shotgun completely, especially those of smaller stature.

Installation of the Venom-SE kit wasn't extremely hard. If you know how to disassemble the 500, including the magazine tube, you should be able to complete the install. If not, Adaptive Tactical does offer installation.  After you have made sure the firearm is unloaded, remove the barrel, trigger group, left & right shell stops, bolt carrier, forend, shell lifter, and finally the magazine tube. The kit has decent instructions on this, so don't feel overwhelmed. Since the Venom-SE kit also comes with a new stock, the old one must also be removed. Now it is time to install the magazine tube adapter. To do this, screw the supplied tube into the receiver threads. It most likely will not line up with the magazine tube on the bottom. So one must sand the end of the tube down. This process takes a while, so be patient. After some sanding, try the tube again. Eventually the mag well will be parallel to the sides of the receiver, you are now done with the hardest part. Now it's time to reinstall all the parts with the new ones supplied. The only strange part in the installation is that the left side shell plate is not reinstalled. I tried it with both shell plates installed and the shotgun had problems feeding. When I removed it, the problems went away, so do follow this step. When installing the stock, you must choose one of 2 spacers that go between the receiver and the stock. One has a slot for a sling, and the other does not.

AT5The kit comes with one 10 round magazine, and a 5 round box magazine is also available. Adaptive Tactical also sent a 10 round drum magazine for me to try out, as well. I really liked the 10rd stick magazine as it functioned flawlessly in my tests.  The 10rd drum magazine, however, did not function nearly as well. The shotgun would sometimes fail to pick up a round out of it. At first, I thought maybe it was from me short stroking the slide, but I made a point to push forward and backward on the forend until it stopped, and the drum mag would still not always pick up a round, about 1-2 times every magazine. The drum magazine is shorter than the stick mag and the drum sits out to one side off of center. Because the drum is offset, they made it ambidextrous, which is a very nice feature. To insert the magazines, you must first put the front of the mag in, and then rock it back and up, very much like an AK mag.  To remove the magazine, you must push the magazine release lever behind the mag, and then rock it out, also like an AK.

AT4

My favorite part of the kit is the AR-15 style M-4 stock with a built in pistol grip. The stock is adjustable for length, and has built in cups for quick detach sling swivels. The pistol grip was very comfortable and has a storage compartment in it. The base to the storage compartment was extremely hard to get on and off, since Adaptive doesn't mention that it has storage, it makes me think that maybe they know this. On the stock is also one of the most comfortable butt pads I have ever used. It is about and inch thick and really cuts down on felt recoil. Because this is a pistol grip stock on a Mossberg, you can not get to the safety without removing your hand from the pistol grip (the safety is on top of the action.)

AT2

The Wraptor forend has 3 picatinny rails mounted on an elevated platform that sits above the barrel. 1 rail on top, and 1 on each side. The forend uses a sight tunnel through the rails. The tunnel is very large and may actually help one to find the front sight or bead quicker. It's kind of like looking through a red dot sight. The rail on the top of the Wraptor forend is too high to put a red dot on (I tried) and is probably best suited for some sort of flashlight. Also on the forend are some threaded holes to use the supplied kelly grip. The grip is basically like a vertical foregrip but attaches to the side of the forend. The kelly grip is stouter than I thought it would be. It worked fine also, but seemed a little awkward. The Wraptor also is designed in such a way that there is a lip on the backside to help from getting your hand pinched when cycling the shotgun.

If you are interested in getting a magazine conversion for your Mossberg, Check out the offerings from Adaptive Tactical. These kits are made from a polymer that is extremely rugged and feels almost like aluminum. They also offer different options than the kit I received. So if you just want the magazine conversion kit with a forend, or maybe just the stock, they have options available.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Magazine Conversion for Mossberg 500 shotguns

Target Market: Shooters wanting easier loading or maybe Heavy class 3-gun shooters

FNBs (Features & Benefits of this product):

  • Magazine conversion
  • 5 rd box, 10 rd,box or 10 rd drum magazines
  • Pistol grip adjustable stock
  • Forend with picatinny rails

What other aesthetic options or finishes are available? 

  • Black
  • Kryptek
  • A-TACS
  • Multicam
  • Desert Digital

Price point: 

MSRP = $339.99 (as received with Wraptor Forend, 10 rd box mag, and stock in multicam)

$299.99 (Wraptor Forend, 10 rd box mag, and stock in black)

$229.99 (Wraptor Forend with 10 rd box magazine)

$199.99 (Standard forend with 5 rd box magazine)

I need it now! Availability: You can readily purchse the Venom-SE magazine conversion directly from Adaptive Tactical.

Our Rating:

Pros:

  • Adjustable stock
  • Pistol grip
  • "Wraptor" forend
  • 10 round magazine
  • Pattern options
  • QD sockets built in
  • Ambidextrous drum magazine
  • It's now a Magazine fed shotgun!

Cons:

  • Installation
  • Safety isn't easily reached
  • Drum magazine didn't function as good
  • Price (though less expensive variants are available)

Score: 7.5 Good75

 

 

Chad's Favorite Link: U.S. Tactical Supply

Firing Line Review

 

 

Crew Holsters "OL' Classic OWB" Holster

Crewowb1

The Crew Custom Holsters OL' Classic OWB is your standard outside the waistband holster.  It is manufactured from some nice heavyweight kydex or similar plastic.  The one I received is for a full size 1911 style pistol.  It arrived in black.  I tried it with 2 different 1911's and it functioned flawlessly.

Crewowb2The design of the holster would make it very useful for everyday carry, IDPA, hunting, or any other thing you might want an outside the waistband holster for.  The belt loops supplied fit my 1.5" belt nicely.  The loops are also kydex, and are very deep, meaning that a really thick belt, or one of the double competition style belts, will fit through the loops.  The loops can also be adjusted up or down on each side.  This way, the holster can be lowered, raised, or adjusted for cant.  Being that it is for a 1911, the inside sheet of kydex came up just to the safety lever.  The outside piece is a little lower to help you get a good grip when drawing.  This model OWB holster also covers the trigger guard completely.  It is also molded around the mag release button so that it can't be hit accidentally.  Some of the owb models have adjustable retention, this one does not.  I didn't find this to be a problem, as the holster retained the firearm nicely.  The draw stroke is also very smooth. Upon reholstering, you do get a good "snap" as the holster locks the gun in place.  I did notice that it took a few draw strokes to break in the holster, as it was very snug when I first received it.

This holster is really nice.  It is available in lots of colors and patterns, for a few extra bucks.  There are also options for weapon mounted lights and lasers.  Various belt clip options are also available, as well as a sweat guard, if one wishes.  The only flaw I found with this particular model was that, with one of my 1911's, the safety would just touch the holster so that the firearm would not go in completely.  I mean by maybe an 1/8".  So I just filed that spot down slightly and it worked great.  I called The Crew Holsters about this and they said I could send it in for them to fix, because it does have a lifetime warranty.  They said they would look at the problem and I doubt that it exists anymore.  If you're in the market for a good kydex style holster, give the Crew a call.

Crewowb3

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Outside the Waistband holster

Target Market: IDPA, concealed carriers, hunters

FNBs (Features & Benefits of this product):

  • Adjustable belt loops
  • Available Options
  • Full trigger coverage
  • Good retention

What other aesthetic options or finishes are available? Lots of different colors, patterns and options.

What others are saying?: 

  • THE STUTTERIN GUNNER from YouTube
    "I've ordered a few of their iwb holsters and i think i found the last holster company I'm going to deal with, the owner is cool and prices are damn good, and the product is good, speaking of which i need to order a iwb for my sig."

Price point: 

MSRP = $45.00 for black, everything else extra

Retail = $45.00+

I need it now! Availability: The Crew Custom Holsters 

Our Rating: 

Pros:

  • Good Retention
  • Adjustable Belt loops (height and cant)
  • Firearm availability
  • Color and pattern options
  • Light and Laser options
  • Belt loop options
  • Adjustable retention on some models
  • Completely covers trigger

Cons:

  • Safety on 1911 hit edge of holster slightly

Score: 8.5+  Grea85t

 

 

Chad's Links:

Handgun Radio

Man O' Steel charity fund raiser multi gun challenge

Firing Line Review

 

 

CRKT Triumph Folder

crkt3.jpg

crkt3Everyone should have a good folding knife.  And it seems I am always looking for something that fills that bill.  Well I came across the Columbia River Knife & Tool (CRKT) Triumph non-assisted opening knife.  The Triumph is designed by knife maker Pat Crawford.  It seems that CRKT may be discontinuing the non-assisted version, because they are discounted on their website.  This particular knife may be on the large side for some people, weighing in at 6.3 ounces.  But with some of the features it has, I couldn't wait to try it out. crkt2The Triumph is a full featured knife.  Starting with the AUS 8 stainless steel blade.  It is a dual ground Tanto style with a false top edge.  The false top edge and tanto blade design give the knife good puncturing abilities.  You can get the Triumph with or without Veff serrations.  This one has no serrations.  The blade is held out with a single .100" locking liner and the knife also has CRKT's AutoLAWKS safety.  AutoLAWKS is a spring loaded lock that engages once the knife is fully opened.  This feature helps to keep the locking liner in place and supposedly makes it almost as strong as a fixed blade.  When closing the Triumph, one must first move the autolawk out of the way with a finger, and while holding the lock back, push the liner over, and then close the blade slightly.  Once the blade has moved, you can then release the lock and fold the knife in as normal.  It takes a little bit to get use to, but I don't even notice it anymore.

Another nice feature about the Triumph is its G-10 handles.  This handle offers one of the grippiest I have ever used.  Water, mud, and oil don't seem to make it any different either.  When inserting or removing the knife from your pants, it can be difficult because the texture of the grip makes it seem like you wrapped it in sandpaper.  The clip on the knife is removable, but it only has one position.  That position is tip down, so if you like tip up carry look elsewhere for your knife.  The clip is very strong and keeps the Triumph in place throughout the day.

Like I said previously, the knife is large.  Coming in at 5" closed and 8.5" open.  The Tanto style blade is 3.5" long and .14" thick at its spine.  The knife I have has a tiger stripe camo coating on the blade, with black handles.  Different blade designs and handle colors are offered.  CRKT also makes the Triumph in an assisted opening, or a fixed kneck knife.  I have cut many things with this knife and the edge seems to hold up very well and I am pleased with the quality.

crkt4Firearms Insider Reviews - 8 Key Points

Claim to Fame: Good tactical folder for everyday carry

Target Market: People looking for a good solid EDC knife

FNBs (Features & Benefits of this product)

  • AutoLAWKS locking system
  • 3.5" Tanto blade
  • G-10 grips
  • locking liner
  • Serrations optional

What other aesthetic options or finishes are available?

  • Veff Serrated blade
  • Plain Black Blade
  • Assisted Opening

What others are saying?

CRKT Delivers

Reviewed by ApolloExx on Sierra Trading Post: 4/5 stars  - The triumph series means business, with its one side bevel, tanto point, and the serrations that are more like hooks then serrations, this knife is intimidating, aggressive, and very attractive. Crawford designs made this knife out of quality parts and materials, each knife is handmade and is all around a balanced, high quality knife. the grip on this knife is also very unique, feeling more like fine sandpaper this knife has a pleasing texture and you wont loose your grip even if you tried. downside of the blade is the effort it takes to sharpen it, with serrations like this it may be a challenge to sharpen but I believe that can easily be worked around,

Michael on CRKT.com  -  I have between 12-15 CRKT knives, and this being my most recent purchace has given me the chance to really get to use this thing quite a bit. In the past 3 weeks I've had my Triumph w/Veff serrations I've put the thing through absolute hell and have only had to sharpen it once completely and one quick time up This things a BEAST and I would HIGHLY RECOMMEND THAT you grab one if you happen to be lucky enough to come across one

Price point 

MSRP = $149.99 ($44.99 discount)

Retail = $99.99 on Amazon for the assisted opening

I need it now! Availability: Readily available on CRKT

Our Rating:

Pros: + G-10 handles - excellent grip + 3.5" Stainless Steel blade + Stays sharp + Strong .14" thick blade + AutoLAWKS Feature

Cons: - G-10 handles can be too course - Overall size at 5" closed and 8.5" open - AutoLAWKS takes some getting use to - Heavy at 6.3 ounces - Non USA made

Score: 7.5 Good75

 

 

Chad's Favorite Link: Handgun Radio

 

Allen Company Recon Tactical Backpack

Allen Company Tactical Recon Backpack

Technically, all backpacks could be considered tactical. After all, tactical means "of or relating to a maneuver or plan of action designed as an expedient toward gaining a desired end or temporary advantage." Having an efficient storage solution that can easily be carried on one's person is a pretty distinct advantage over say, a plastic grocery bag or just your pant pockets. Heck, even a bindle (picture the classic cartoon hobo with a sack tied to a stick) is a human invention that could be considered a distinct advantage for carrying your stuff. What I'm getting at, is when a product is marketed as "tactical" I try to focus on what it does that provides a distinct advantage over the other products in it's category. 

Allen Company Tactical Recon Backpack

There are plenty of "tactical" backpacks out there, and typically the quality and capacity improves the higher the price point. If you are looking for a dependable bug-out bag or EDC bag that will outlast the zombie apocalypse (heavy sarcasm) then you may be in the $200+ range. There are some of us who are just looking for a fairly inexpensive bag that has expanded useful features, as well as looks cool. After all, the first rule of Tactical is if you aren't looking cool, you are doing it wrong. Or so I've been told! In shopping for an inexpensive tactical backpack that would serve well during day outings or travel, I found the Allen Company Recon Tactical Backpack. For only $25 it seemed like a decent pack that was casual but looked the part. Black: check. MOLLE webbing: check. Hook & Loop panel for the sweet PVC morale patches from Patriot Patch Co.: check!

Allen Company Tactical Recon Backpack

It has 3 zippered compartments ranging in size. The largest main compartment has a partition sleeve that holds either a laptop or tablet device,  textbook or magazines (the reading kind) or even a hydration bladder, with a covered port in the top where the bladder's drinking tube can come through and then be secured to the strap. Outside of the aforementioned sleeve theres room for loosely putting anything else, a small jacket or several ham sandwiches. There was clearly room to accommodate more pouches, pockets or an interior MOLLE system but Allen left is pretty minimalistic and bare here, which I guess is why it's under thirty bucks.

Allen Company Tactical Recon Backpack

The second compartment has more to offer as far as utility, and short leashed keyring, admin/paper pocket, and some smaller stitched pockets for pens or smaller items. The third forward most zippered pocket located directly behind the front MOLLE webbing is completely bare, just  big enough for a small book or two magazines (the shooting kind). Once again, pretty bare minimum and really not useful as a range bag, bugout bag, or survival bag.

Allen Company Tactical Recon Backpack

The exterior has MOLLE webbing on the front, sides, and sling of the pack so you can expand the pack with your own tactical accessories. A dump pouch or admin pouch would go along with the whole traveling student role. You could be "that guy" and put pistol mag pouches on the sling and sides, but it wouldn't earn you many credibility points at the gun show. There is a synch-able net pouch for a water bottle on the wearer's right side, and a slim, narrow zippered pocket on the left that will hold a couple energy bars.

Allen Company Tactical Recon Backpack

The comfort of the Recon Tactical Backpack is what's the real hero of its price point, as the back panel and the single sling are padded as well as slightly aerated for reducing sweat spots after wearing it all day. It is a single sling design like a messenger bag / backpack hybrid, so if you weigh it down with heavy contents (ie: dozens of manufacturer catalogs from SHOT Show) you will definitely feel it in your left shoulder after awhile. The downside to hybrid single strap bags like this is the inability to switch shoulders to reduce that fatigue if your pack is too heavy. There is a smaller strap with plastic M-buckle  on the right side which snaps into the main shoulder strap to keep the bag from shifting around, and that helps stabilize the load.

Allen Company Tactical Recon Backpack

In all honesty, I bought this bag from a local gun shop the week before SHOT Show 2015 because I didn't have the time or budget for a more expensive and comprehensive backpack, and I thought a more minimal pack would be useful with all the other camera and recording equipment slung over my shoulder. I quickly found out how overloading the pack with heavy magazines and catalogs lead to pain at the end of a whole day spent on the showroom floor, and I really wished I had anted up for a more conventional double shoulder strap bag with better use of its interior space. If it had better use of internal space with more pockets or pouches on the inside, you wouldn't need to snap on more MOLLE pouches on the outside. Admitting all that, I would still vouch for the Recon Tactical Backpack for a student or just someone on the go looking to travel light but still have some "tactical" features. If you are looking for a full capacity backpack with more features and double straps like a 5.11 pack but more affordable, don't hesitate to check out Allen Company's other tactical backpacks.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The Recon Tactical Pack is ready for the field, the range, or duty use. The single should sling is nicely padded for comfort, while the interior pockets and exterior MOLLE loops allow for easy organization and the ability to add MOLLE compatible accessories.

Target Market:  Day-trippers, Casual Hikers, Students

FNBs (Features & Benefits of this product):

  • 600D cosntruction
  • Single, padded shoulder strap
  • Exterior MOLLE web system
  • Interior organization compartments
  • Water bottle pocket, plus hydration bladder sleeve
  • Air mesh padded back
  • Hook and loop patch for adding name tape or logo patches
  • Padded compartment for laptop
  • Dimensions: 17.5" x 11" x 7.5"

What other aesthetic options or finishes are available?: Black only

What others are saying?: "The Recon Tactical Pack is ready for the field, the range, or duty use. The single shoulder sling is nicely padded for comfort, while the interior pockets and exterior MOLLE loops allow for easy organization and the ability to add MOLLE compatible accessories." Geekdotcom.com

Price point:

I need it now! Availability: Amazon

Our Rating:

Pros:

  • Minimal price, minimal footprint
  • Hydration bladder compartment and hole
  • MOLLE webbing for expandable capacity
  • Stitching holds up for light - medium use
  • Strap and back panel are padded and comfortable
  • Price Point is low for minimal features

Cons:

  • Lack of internal pouches / pockets
  • Design limits carry to left shoulder only
  • Did not include hydration bladder

Score: 5.5 Mediocre

 

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Crew Holsters "Shadow" IWB Holster

crewholster5 Photo_2015-06-08_09-02-28_AM

I received the Shadow holster from "The Crew Custom Holsters" some time ago.  The Shadow is a kydex clam shell style inside the waistband (IWB) holster.  I have been wearing the Shadow for a while to try it out.  It is comfortable for a kydex style holster.  The model I received was in black, but they offer lots of different color and pattern options.  They also offer the Shadow for light or laser mounted firearms and tons of different models of firearms.  You can wear it just about anywhere from appendix all the way around to about 5 o'clock.  I typically wear it around the 3:30 position.  It seems to conceal the firearm well, as my children and wife did not notice me wearing it.  One big advantage this holster has over others is that it can be canted frontwards or even backwards.  There are different holes where the clip is located to adjust it to Zero, 15, or 45 degrees.  I tried it in all 3 positions and found that the zero and 15 worked best.  The 45 degree cant seemed strange, but someone may have a use for it.  The fit and finish of the holster are very good. They smooth the edges out and try to eliminate any sharp surfaces.  Mine is for a Kahr CM9 and it fits nicely and, with the adjustable retention, holds the pistol well.  The holster does collapse a small amount when there is no firearm in it.  It didn't seem to collapse enough to make reholstering difficult, but I did notice it.  I usually wear a hybrid style holster, but have found that with this little holster, the single clip makes it ideal to slip on and off easily.  If I need to run to the store at night or something similar, I can just grab this holster and clip it inside my waistband with no problems.  The Shadow is a very nice, convenient holster.  They will also do custom one off holsters if asked.

crewholster4

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Convenient IWB holster

Target Market: Concealed carriers

FNBs (Features & Benefits of this product):

  • Adjustable cant
  • Lifetime warranty
  • Single wide clip
  • Adjustable retention

What other aesthetic options or finishes are available? Lots of different color and pattern options

What others are saying?:

  •  5/5stars at The Crew Custom Holsters - Quick and excellent, communication, product and service. I have been recommending The Crew Holster to my friends.

Price point: 

I need it now! Availability: The Crew Custom Holsters.  Some options ship quicker than others, see Available Molds

Our Rating:

Pros:

  • Adjustable Retention
  • Adjustable cant
  • Light options
  • Color options
  • Easy on/off

Cons:

  • Slight holster collapse

Score: 8.5 GREAT85

 

 

Chad's Favorite Links:  Handgun Radio

ABC House Charity Match June 20th, it really is for the children!

Firing Line Review

 

 

Urban Armor Gear - Folio Scout iPad Air 2 case

IMG_2374.jpg

  UAG Folio

When looking at a means to protect your technological investment, it is a balancing act. One must find their individual balance between; protection, maintaining the functionality of original device, and style. When I received the Folio from Urban Armor Gear, I was highly impressed with how they balanced the three points. The style is masculine bold yet refined, the increased water resistance and drop protection is great, and you can still access all ports and what few buttons an iPad has with ease.

Standing Mode

Indexing grooves for stand functionality.

 

 

 

 

 

 

 

 

 

 

This case is great and the built in stand utilizes grooves in the screen cover to prop the iPad vs other cases that use a trifold cover or bulkier methods.

The material of the case feels great in the hand, offering no slip durability and a nice cushiony feel.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Protect your technology

Target Market: Smartphone and Tablet Users

FNBs (Features & Benefits of this product):

  • Water resistant grip.
  • Smartcover.
  • MIL-STD drop rating.
  • Lightweight.

What other aesthetic options or finishes are available?: Rogue (Red)

What others are saying?: Check out this products Amazon Page to see all the user submitted reviews.

Price Point:

I need it now! Availability: Direct from Manufacturer shipping is fast and on Amazon this is a prime eligible item.

Our Rating:

Pros:

  • Not overly bulky.
  • Allows unimpeded use of iPad’s TouchID.
  • Easy access to all ports and buttons.
  • Slight increase in overall water resistance.
  • Smart cover with secure magnetic strap.
  • Lightweight.

Cons:

  • The angles the stand provides may not work for all situations

Score: 8.0 Great80

 

 

My Links:

NJ Gun Blog

Guns of Hollywood Podcast

Firing Line Review

 

 

Tough Hook

Tough-Hook-1.jpg

  Tough Hook

[embed]https://d2pq0u4uni88oo.cloudfront.net/projects/423963/video-194680-h264_high.mp4[/embed]

A coat hanger… Not that exciting, except this isn’t your normal coat hanger. It’s been designed specifically for plate carrier/body armor. You can use it for other heavy gear, anything that has straps. You could hang ropes up. Or even pull ups with its over 150lbs weight rating.

Much like everything that’s great, it was born out of necessity. An Army veteran came up with the idea for this because all of the alternatives weren’t cutting it. He put his product on kickstarter and raised over $17,000 of his $11,000 goal. Clearly he wasn’t the only one who thought it was a good idea.Tough-Hook-1-284x300

After talking to my friend who’s a veteran, it seems the go to for storing body armor is either in a corner on the floor or tape three coat hangers together to hang it up. On top of being over engineered with its tough I-Beam construction, it has flared ends to keep shoulder straps from falling off.

“That’s all cool but what about carrying to my car, or wherever I’m gonna move it to?” you might ask. They’ve got you covered. Instead is having to hold onto the hook with all that weight they’ve integrated a handle on the underside of the hanger. And because of that, it's usefulness doesn't end at the closet. You can use it to carry your gear to the car, range, work, or wherever you think you want it at. All you have to do is spin the hanger inside the vest and you have a nice, wide grip to carry it with. It’s just like carrying a briefcase, except it contains SAPI plates instead of documents.

The only thing I wished this had was an accessory hook. As it is, you’d just have to put your ears or gloves on your vest or in a dump pouch.

 

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Holding/transporting plate carrier/body armor.

Target Market: Military, LEOs, home defense, anyone who owns plate carrier/body armor

FNBs (Features 'N' Benefits):

  • Comes in a variety of colors to match your plate carrier
  • Built in carry handle
  • Made in the USA

What other aesthetic options or finishes are available?:

  • Black
  • Tan
  • Green

What others are saying?: 

Price point:

I need it now! Availability:  Amazon is the best bet because you can get free shipping with Prime.

Our Rating:

Pros + Our Rating + Handle for carrying + Wide to prevent strap deformation + Tough as H*** + Inexpensive + Army veteran created + Made in America + Lifetime Warranty

Cons - No accessory hooks/attachment points - Very Specific application

 

Score: 9.0 Amazing 90

SEARCH