Community Reviewer

,

Sharps Bros Livewire

,

Sharps Bros Livewire AR-15 lower receiver review

Written by: Buddy Murphy

  This is a review of the Sharps Bros Livewire AR-15 lower receiver. Yes, these are the same guys that make lowers with skulls, warrior helmets, or other goofy things on their magazine wells. But when they get serious, they make a quality, functional piece of kit.

  One of the first things you'll notice is the heavily flared mag well, which not only looks great but also makes reloads faster and more intuitive. The ambidextrous bolt release is another welcome feature, providing ease of use for both right and left-handed shooters. This particular design for a right side bolt release has the perfect amount of force needed to release the bolt. Some other receivers take too much effort to release the bolt, forcing you to move your hand off of the fire controls, like the PWS Alpha.

  The right side bolt release is especially useful for me (right-handed shooter) when shooting CMP (Civilian Marksmanship Program) courses of fire. The first and last stages are single load stages. Meaning, you have an empty magazine in your rifle (or a specialty mag), you drop a round into the ejection port, close the bolt, and fire your one round. You repeat that 10 or 20 times depending on the stage. This forces you to break position between each shot. By having the bolt release on the right side, I can hold my rifle against my shoulder with my left hand, and get another round, drop it in the rifle, grip the rifle with my right hand, and close the bolt, minimizing my movement between shots.

  The transition between the integrated, oversized trigger guard and the magazine well is stepped, giving it a distinct and clean look. The threaded bolt catch pin and rear takedown pin recess also add to its overall precision and durability.

  As of July 2021, Livewire has undergone a significant upgrade, it is now made from a forging. The process begins with a 7075 aluminum billet, which is heated to 800 degrees and then forged into a near-final shape using a custom tool in an impressive 4100-ton press.

  Post-forging, the receiver undergoes final machining on CNC machines. This reduces material costs and machine time without compromising quality. The result is a receiver that feels incredibly robust and well-finished, with every detail meticulously crafted. The anodized black finish, done to MIL-A-8625 standards, ensures durability and a sleek professional look.

  Putting the lower parts in the receiver was a standard affair except for the left side bolt catch. Instead of a roll pin holding the bolt catch to the receiver, it has a small hex-head screw. This makes it much easier to attach the bolt catch than tapping in a roll pin. Also, before you attach the bolt catch, you must insert the included transfer bar. The transfer bar allows the bolt release, on the right side, to push the bottom of the bolt catch toggle (causing the top to move in towards the receiver as if you pushed it), releasing the bolt.

  In summary, the Sharps Bros Livewire AR15 receiver delivers on every front; strength, precision, and aesthetics. It’s a top-tier choice for anyone looking to build or upgrade their AR15 with a receiver that truly sets itself apart from the rest. While it maintains the classic AR15 aesthetic, it brings its own unique flair and functionality to the table: like the oversized integral trigger guard, beveled magazine flare, and ambidextrous bolt release. It is fully compatible with mil-spec parts and magazines. Weighing around 8.7 ounces, it strikes a perfect balance between weight and durability.

Firearms Insider Reviews - Key Points

Claim to Fame:

AR-15 lower receiver with right side bolt release.

Target Market:

Lefties, Competition shooters, those that want ambi-everything

Features, Benefits, and Specifications of this product:

  • Large integrated trigger guard

  • Right side bolt release

  • Flared mag well

  • Forged lower

  • Mil-spec

What other aesthetic options or finishes are available?

Only black anodized finish

What others are saying?:

5/5 stars from Dave K. at Brownells

Absolutely the best value for the $$$

I am very impressed with this lower receiver. Everything fit perfectly. Best value for the money! All of my future builds I will use this receiver.

Link to other reviews:

The Firearm Blog

Price point:

MSRP = $136.79

Retail = $124.99 at Brownells

I need it now! Availability:

Brownells

Our Rating:

Pros:

  • Forged Receiver

  • Flared Magwell

  • Right side bolt release

  • Integrated trigger guard

  • Oversized trigger Guard

  • Mil-spec dimensions

Cons:

  • None

Score: 8.00 Great

,

Young Manufacturing Chrome BCG

,

Young Manufacturing

Lightweight Chrome BCG Review

Written by: Buddy Murphy

  This is a review of the Semi-Auto/Full Auto M16 Complete Bolt Carrier Group (BCG), manufactured by Young Manufacturing Inc. This bolt carrier group is manufactured using MIL-SPEC quality steel and milled on their in-house CNC machines, ensuring precision and reliability in every component. The particular carrier in this review is their SLC (Super Lightweight Carrier), which they no longer have on their site, but can still be found for sale on 3rd party sites. All attributes from this carrier extend to their M-16 BCGs - except weight.

  Each bolt carrier undergoes a meticulous process of getting heat-treated, hard-chromed, and the bolt throat is then chrome-lined for enhanced durability and performance. They remove all sharp edges and rough finishes. Ensuring smooth operation and preventing any unnecessary wear and tear on your firearm.

  What does hard-chrome do for you? Well, it adds durability to the BGC and it makes the surface very hard so carbon has more of a problem sticking to it. Here are some before and after pictures. With half of a dry paper towel and about 10 minutes, this BGC went from this…

…to this.

  That carbon has been building up since Forgotten Weapon’s “Moons Out Goons Out” in March of 2024. It has done several other competitions and practices since – all suppressed in a direct impingement rifle. I have run Nitrided BCGs and they will get sticky (and NiB to a lesser extent) after getting a sufficient amount of carbon, this BCG did not get sticky. I have become a Piston AR snob because of direct impingement BCGs becoming inoperable without constant care, when shooting suppressed. But with this BCG, I am starting to question my own snobbery.

  Now, let me draw your attention to the innovative HMB Bolt by HM Defense, that is included in this carrier group. The HMB Bolt represents a significant advancement in bolt design by eliminating the traditional pass-through cam pin hole. Replacing it with a cam pin socket and radiused cam pin. This patented design addresses the inherent weak point in Mil-Spec bolts. It increases the amount of metal—and thus strength—at the cam pin location. The result? No more broken bolts, at least at the cam pin.

  Moreover, the HMB Bolt reduces contact between the cam pin and firing pin, allowing for smoother operation of the firing pin, bolt lugs, and aft gas rings. The cam pin socket also retains lubrication, ensuring extended operational performance.

  You may have noticed in the photos that the gas key is not staked, that is intentional. Here is a link as to why they don’t stake their gas keys from the Young Manufacturing President: Read it here. The long and short of it is if you do it well enough, they don’t need staking. The gas key is supported by a recoil lug, a feature designed to enhance overall reliability and function.

Firearms Insider Reviews - Key Points

Claim to Fame:

Very durable, easy to clean BCG, that still runs smooth even when filthy.

Target Market:

Suppressor host rifles, people who don’t clean their rifles, heavy use operators

Features, Benefits, and Specifications of this product:

  • Mil-Spec

  • Hard-chromed

  • Advanced design bolt

  • Full-auto rated

  • Operates smooth when dirty

  • Easy, in-field cleaning

What other aesthetic options or finishes are available?

M16 BCGs are also available in Black Nitride, with or without the HMB bolt

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $299.95 for M16 

Retail = Same 

I need it now! Availability:

Young Manufacturing or KE Arms

Our Rating:

Pros:

  • Hard-chromed, including the bolt throat

  • Advanced bolt design

  • Recoil lug supported gas key

  • No sharp edges

Cons:

  • Price

  • Some people will require staking the gas key

Score: 9.00 Amazing

ShootingSight RPS Trigger

ShootingSight RPS AR15 Trigger Review

Written by: Buddy Murphy

  This is a review of the ShootingSight RPS Trigger upgrade kit. This kit features a 2-stage trigger and hammer configuration, compatible with the AR-15 and other platforms that utilize similar pivot pin spacing. This trigger is considered a National Match trigger and should be compared to others like the Geissele’s National Match.

  Should this hammer be black? No. That is carbon from heavy use suppressed in a direct impingement rifle. Does the trigger feel gritty? No, it is still very smooth.

  The sear surfaces have been meticulously lapped to achieve ultimate smoothness and feature a Nickel Boron (NiB) coating.  This makes the trigger highly resistant to wear and offers a low coefficient of friction, resulting in a smooth and consistent pull. Like most AR triggers, this is not adjustable.

  Let me take you back to High School physics class. Static friction is greater than kinetic friction because static friction acts when the body is at rest. Whereas in kinetic friction, an object is in motion. You can feel this in the trigger. Once the trigger starts moving towards the second stage wall, it feels less heavy than when you start moving the trigger. The reset is very positive and is just beyond the second stage wall, but not fully out to the first stages at-rest position.

  One of the standout aspects of these trigger/hammer sets is that they are CNC machined from alloy Rolled Plate Steel. Thus entirely avoiding the use of cast parts. The finer grain structure of this steel provides significantly greater tensile strength (about 10 to 20% stronger), better impact resistance, and less fatigue compared to cast steel. This allows for the sear edges to be precisely honed, resulting in an exceptionally crisp break that maintains its sharpness over heavy use.

  This trigger installs like any mil-spec trigger, nothing proprietary (look at you cartridge triggers). Which makes it compatible with any lower that accepts mil-spec triggers.

  Additionally, the RPS Trigger kit includes an extra powerful Wolff hammer spring, which delivers maximum ignition energy and an impressively fast lock-time of just 4 milliseconds. The second stage trigger creep has been virtually eliminated, ensuring a clean and crisp break with no felt travel in the second stage.

  I use this rifle for CMP (Civilian Marksmanship Program) practice every weekend (unless I’m trying out a different rifle), so this trigger gets a lot of use. I can tell when I am using a different trigger, it just isn’t as smooth, and my scores can tell too.

  The trigger pull weight is set at 4.5 (2.5/2.0) pounds, which meets the NRA/CMP minimum requirements for the Service Rifle class. Overall, the RPS Trigger upgrade kit is an excellent choice for those looking to enhance the performance and reliability of their rifle.

Firearms Insider Reviews - Key Points

Claim to Fame:

A durable, smooth, and crisp National Match trigger.

Target Market:

People who want to hit what they are aiming at. Seriously though, this is a great replacement trigger for any AR user and it conforms with minimum trigger weight for CMP or NRA competitions.

Features, Benefits, and Specifications of this product:

  • Match trigger

  • 2 stage trigger

  • 4.5lb total pull

  • 2.5lb first stage

  • 2.0lb second stage

  • Standard mil-spec dimensions and install

  • Curved trigger

  • Heavy hammer strike force

What other aesthetic options or finishes are available?

These triggers come in either raw metal or several colors (Tan,Blue,Red,Green,Pink,Black).

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found

Price point:

MSRP = $215.00

Retail = Same

They do have sales from time to time, but otherwise the price is the price. They also have Military/LE discounts

I need it now! Availability:

 ShootingSight.com

Our Rating:

Pros:

  • Smooth trigger, tactile reset

  • Strong steel

  • Standard install

Cons:

  • Price (but is comparable with other National Match triggers)

Score:  Great 8.50 if not 9.00

Vosteed ANKYLO

Written by: Casey Kienzle

  I received Vosteed’s new knife, the Ankylo, and it’s truly a fine knife! This knife features an all new lock system called the V-anchor lock. Which is an incredible new locking system. So let’s dive in and see what makes this knife so great.

The handle

  The Ankylo’s handle is made from 6061 Aerospace Grade Aluminum. I personally really like this handle because of the grenade pattern texture and because of the handle shape. It makes it really easy to get a good grasp on the knife and hold it comfortably. Plus, it makes me feel like I have really good control over the knife. There is amazing jimping on the back of the blade and runs along some of the spine of the handle, which definitely helps with that control as well. On the inside of the handle are machined weight relief pockets. These pockets are there to reduce user fatigue. This gives the knife a good balanced feel. For carrying the Ankylo around all day, Vosteed added a deep carry pocket clip.

The lock 

  The Ankylo features Vosteeds new V-anchor button lock. It is a pretty fascinating design. There is an anchor plate and a magnetic connector that will attract, and push, the button from different directions. The pivot button will become recessed even if the lock is not engaged, that way the button will not be accidentally pushed. What that does is give the lock an integrated fail safe system. The anchor plate for the lock is also spring loaded, which allows it to quickly move into place. The anchor plate is milled from a 5mm thick piece of steel, giving it lots of strength. I really like this lock, it feels incredibly secure when the blade is opened and the lock is engaged. 

Opening

  There are 4 different ways to open the Vosteed Ankylo. Thumbhole, front flipper, back flipper and an easy to use button. I personally really like that because sometimes your hand may be in a position where you need to open the blade differently and you can’t use the flipper on the back. So it’s really handy to have the 3 other ways to open it. When I first started using this knife, I noticed that it has a really smooth opening. And that is due to the larger sized bearing Vosteed uses in this knife. Other folding knives use a smaller sized bearing. Since the Ankylo uses that larger bearing, I notice that it has a much smoother opening. 

The blade

  One of my favorite parts of the Ankylo is the Elmax reverse tanto style blade. The blade material is Bohler Elmax, which is one of the toughest high end stainless steel you can get. It compares to S30V. Elmax also has better wear resistance than S30V, meaning that this blade is really durable and stays sharp for a long time! I can definitely see that with all the boxes, tape and other various things I have been cutting with the knife. They designed the blade belly to be really great for multitasking. Because of that, it can easily cut and pierce through lots of things. That’s what you want in a knife, right!!

Summary

  This is my very first Vosteed knife, and I absolutely love the Ankylo! It feels very solid, it’s incredibly sharp and I absolutely love the button lock. The design of the new Vanchor lock is really great and feels very secure when it’s engaged. This is truly one of the best knives I’ve ever used. If you are looking for a great everyday carry knife that is tough and stands out from other knives, then the Vosteed Ankylo is the knife for you!

Firearms Insider Reviews - Key Points

Claim to Fame:

Rugged EDC folder with a robust new locking system

Target Market:

Anyone wanting a high quality, sturdy, folding EDC knife

Features, Benefits, and Specifications of this product:

  •  Blade Length: 3.18" | 80.90 mm

  •  Overall Length: 7.75" | 196.90 mm

  •  Blade Width: 1.22" | 31.00 mm

  •  Blade Thickness: 0.134" | 3.40 mm

  •  Blade Material: Elmax

  •  Blade Grind: Flat

  •  Blade Style: Reverse Tanto

  •  Blade Finish: Black Stonewash / Satin / Stonewash

  •  Hardness: HRC 60±2

  •  Handle Length: 4.57" | 116.00 mm

  •  Handle Width: 1.06" | 27.00 mm

  •  Handle Thickness: 0.563" | 14.30 mm

  •  Handle Material: Aluminum

  •  Color: Black / Green / Gray / Orange / Blue

  •  Weight: 4.76 oz | 135.00 g

  •  Opener: Front Flipper | Back Flipper | Thumb Hole

  •  Lock Type: V-anchor Lock

  •  Pivot Assembly: Caged Ceramic Ball Bearing

  •  Pocket Clip:  Non-reversible | Stainless Steel

  •  Carry Position: Tip-up

  •  Knife Type: Manual Folding

What other aesthetic options or finishes are available?

There are two options for the handle: Machine textured aluminum that comes in grey, black, orange and green. Or smooth, hard-coated matte finish that comes in blue or black.

What others are saying?:

Product has just been released, so nothing found as of publishing

Link to other reviews:

Gear Junkie

Price point:

MSRP = $169.00

Retail = $159.00 on early Kickstarter

I need it now! Availability:

Kickstarter or Vosteed

Our Rating:

Pros:

  • Great Size

  • New V-anchor lock system

  • Handle Texture

  • Blade jimping

  • Elmax blade steel

Cons:

  • Slightly stiff operation out of box - needs break-in period to operate easier

Score: 9.00 Amazing

CRKT Fossil

Written by: Casey Kienzle

  When it comes to everyday carry pocket knives, CRKT has a wide range of different styles. The CRKT Fossil is one of them. It falls under the category of a gentleman’s knife, meaning that it’s tough and durable. But it has a decorative look. This is truly a fantastic knife that is different from your regular pocket knife, and it won’t break the bank. So let’s check out everything that makes this knife a truly great addition to your collection!

The handle: 

  When you see a pocket knife, the first thing that stands out is the handle. And the handle on this knife is one of its biggest strengths! This knife's name is the “Fossil” and they managed to give the handle a slick design while also resembling something that looks like a fossil. The handle has a stainless steel frame that has a really great looking hammer finish on it and features G-10 scales on top of that. The handle has been milled out revealing different shades of brown. Those two together give it that awesome “fossil” look. The unique finish on the G-10 gives it a fantastic grip in your hand. This is by far an incredibly creative design for this knife that really makes it stand out! This knife is a right hand only knife, it does not have a spot to flip the clip around for left handed people. But I am right handed, so this hasn’t been a problem for me.

  The Fossil has a frame lock, and it has to be one of the better frame locks that I’ve had in a knife. The lock on this knife is a little stiffer than other knives, giving it a stronger lockup on the blade. But this doesn’t make it hard to unlock, it still can be easily unlocked with your thumb when you are ready to close the knife. One thing that really stood out to me on the knife when I first got it was the guard on the handle. When you open the blade, the flipper tab swings through and acts as a guard. The shape of the handle already has a really nice area for your finger to sit. But then you get the guard, and it makes it really hard, actually just about impossible for your fingers to slip onto the blade.

The blade:

  The blade on the CRKT Fossil is a “drop point” style. Measuring in at 3.96, it gives you plenty of blade length for cutting. When I first opened the knife I also noticed how crazy sharp it was right out of the box. Since then it’s held a sharp edge very well, and I cut lots of stuff with this knife. Things like cardboard boxes, zip ties and plastic straps for larger boxes like furniture. I have even used it before to scrape off plastic from a few different things. After all of that…it’s still sharp! The blade material is 8Cr13MoV which has stayed sharp for quite some time now. 8Cr13MoV steel’s strength is much higher than other high carbon stainless steels, such as 440C. The back of the blade has some of the best jimping I’ve had on a knife. It keeps your thumb or finger in place really well allowing you to maintain really good control over the knife. 

Opening:

  The CRKT Fossil features a bearing-run pivot that gives this knife a really smooth opening. This knife also opens very quickly when you flip the tab on the back, which really stands out to me. The Fossil gives you two different styles of opening. I have had to use both styles depending on how I open the knife. Both styles have been very smooth and easy. Opening one is the flipper on the back. And opening two is the thumb hole on the back of the blade. Sometimes thumb holes on the back of blades can be a little tricky, but this one has never given me any trouble. 

Summary

  I really love the CRKT Fossil. It is a very nice looking pocket knife that has a cool and unique design, while also being quite durable. The handle on the knife is very comfortable to hold onto while you are using it, but also has a good non-slip grip. The blade has been phenomenal for me. It’s kept an edge really well making it always reliable. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Unique but tough knife

Target Market:

The CRKT Fossil is for anyone who wants a not highly expensive EDC knife, but wants something unique and different looking. 

Features, Benefits, and Specifications of this product:

  • Overall Length: 8.88"

  • Blade Length: 3.96"

  • Blade Thickness: 0.15"

  • Blade Material: 8Cr13MoV

  • Hardness: 58-60 RC

  • Blade Style: Drop Point

  • Finish: Satin

  • Handle Length: 4.95"

  • Handle Thickness: 0.62"

  • Handle Material: G-10 

  • Frame/Liner: Steel

  • Weight: 6.10 oz.

  • Right Hand Pocket Clip: Tip-Up

  • Opener: Flipper

  • Lock Type: Frame Lock

What other aesthetic options or finishes are available?

There is also the 5460 model that has a 3.41 inch blade. That one is around $10 cheaper.

What others are saying?:

It hurts how underrated this knife is. It is a great design because it is comfortable, has a buttery action, useful blade, and beautiful aesthetics. It really feels like a perfect merging of old world with new world materials. This was my first 'gentleman's carry' in my collection and I highly recommend this blade.

Link to other reviews:

Pro Tool Reviews

Price point:

MSRP - $99.99

Retail - $65-$70

I need it now! Availability:

LA Police Gear , Blade HQ, or Knife Center

Our Rating:

Pros:

  • Quick opening

  • Sharp blade

  • Fantastic design

  • Two opening styles

Cons: 

  • The G-10 handle has great grip, but almost too much

  • Sometimes a little tough to pull it out of the pocket due to aggressive grip texture

Score: 8.00 GREAT

CRKT LINCHPIN

Written by: Casey K.

  Over the past few years I have been collecting pocket knives from various different manufacturers. I like to use these for Every Day Carry (EDC). There is one knife that has really topped my list, the CRKT Linchpin. Here are my thoughts on this fantastic pocket knife.

The handle:

  When I first took this knife out of the box, I immediately noticed how durable it felt. The handle is made of glass reinforced nylon with two different styles of texture to offer more grip. One thing that I really appreciate is that the screws on this knife are countersunk which keeps the screws from snagging in your pocket when you go to remove the knife. 

The lock:

  This knife features a large button lock that I personally love! Anytime I lend this knife to someone, they always tell me how much they like the button lock. Mainly because it’s larger and easily unlocks. The button lock does not easily unlock while the knife is in use though. The button also features a really nice texturing design that makes it hard for your thumb to slip off of. 

The blade:

  This has to be one of the best blades I’ve ever had on a pocket knife. The blade material is 1.4116 stainless steel, which is slightly stronger than 420HC. The blade is a spear point that turns serrated halfway down the blade. The serrated section of the blade has great, bat-wing style, serrations that cut through thick stuff like it was nothing. The serrations are called “Veff” serrations. I recently moved and this was the knife that I used during the moving process, and wow! After cutting tons of packing tape and boxes, the blade still has a sharp edge! On the back side of the blade it offers a nice thumb grip (jimping) that keeps your thumb in place very nicely.

Opening:

  One thing I really appreciate about this knife is that it offers 2 different styles for opening. It has the flipper on the back which is what I prefer. But sometimes you are cutting something and your hand may be in an awkward position, so in those situations it’s nice that it features thumb studs as well. 

  The CRKT Linchpin is a fine knife to use as an EDC. It’s incredibly durable and holds an edge very well. This knife is a little larger giving you more of a grip to hold onto. It has a serrated spear point blade which gives you different options for your cutting needs.

Firearms Insider Reviews - Key Points

Claim to fame: 

Large and sturdy EDC

Target market:

Anyone who would like a great EDC pocket knife that’s a little on the larger side.

Features, Benefits, and Specifications of this product:

  • Overall Length:
8.875"


  • Blade Length:
3.75"


  • Cutting Edge:
3.50"


  • Blade Width:
1.13"


  • Blade Thickness:
0.15"


  • Blade Material:
1.4116


  • Blade Style:
Spear Point


  • Blade Grind:
Flat


  • Edge Type:
Serrated


  • Handle Length:
5.25"


  • Handle Width:
1.25"


  • Handle Thickness:
0.68"


  • Handle Material:
Glass Reinforced Nylon

  • Frame/Liner:
Steel


  • Weight:
6.20 oz.


  • User:
Right Hand


  • Pocket Clip:
Tip-Up


  • Opener:
Flipper


  • Lock Type:
Button Lock


What other aesthetic options or finishes are available?

None

What others are saying?:

Super Sharp Serrations

Sharpest serrations by far on any knife in my collection. Cuts through vines with almost no effort. Much easier than any other knife used for the task. My chickens love grapes so every day lately, I've cut off a few bunches for them. The other day, I was carrying the CRKT 5406 and cut through a vine with the tip of the blade. Whittled through the vine a few times and removed the grapes as usual. I decided to use the serrated part of the blade, touched it to the vine and the bunch of grapes just fell off. Thought it was an anomaly so did it again another few times with the same results. Wow. As to the rest of the knife... Good fit and finish. The locking mechanism is a bit sticky. It improved a bit after oiling and many deployments, but still sticky. Overall a great knife for cutting stuff in the garden.

Link to other reviews:

Kevin Cleary on YouTube

Price point:

MSRP- $145.00

Retail- $39.95 at Knife Center 

I NEED IT NOW! AVAILABILITY:

CRKT Linchpin - Columbia River (CRKT) - Knife Center

Amazon

Our Rating:

Pros:

This is a really solid feeling pocket knife. I really believe that it can take whatever you throw at it. It feels incredibly durable when it’s closed and when it’s open and being used. It holds a sharp edge for a good long while. I personally also love the button lock style on this knife.

Cons: 

The price point of $145.00 is pretty high for this knife, I think the sale price of almost $40.00 is a great deal! 

Score: 8.50 GREAT

An Elegant and Lightweight EDC Choice: Civivi Elementum Button Lock Carbon Fiber

Written by Lance Wallace

  The Civivi Elementum Damascus with a carbon fiber handle and a stunning 3.47-inch Damascus blade is a true testament to the craftsmanship, quality and attention to detail that Civivi brings to the table. As an everyday carry enthusiast, I had the pleasure of using this knife for a couple months, and I loved it.

  First and foremost, the knife's appearance is simply gorgeous. The Damascus blade, with its intricate patterns, exudes a sense of uniqueness I often don't find in other knives. The carbon fiber handle complements the blade perfectly, providing a modern and sleek aesthetic. I found myself proudly showing off this knife whenever the opportunity arose.

  One of the standout features of the Civivi Elementum is its lightweight carbon fiber handle. The knife feels incredibly nimble and light in hand, making it excellent to use for quick cuts or extended jobs. The handle's non-textured surface offers a secure and comfortable grip, enhancing overall control and maneuverability. Whether I was performing intricate tasks or simply using it for everyday cutting needs, the lightweight handle allowed for precise and effortless handling.

  While the Elementum impresses with its appearance and handle, I do have one minor complaint. After a month of daily use, I noticed a loss of sharpness in the blade. Admittedly, this is not uncommon for EDC knives. However, it would have been preferable if the blade retained its sharpness for a bit longer before requiring maintenance. Nonetheless, this issue can be easily remedied with routine sharpening.

  Overall, the Civivi Elementum Button Lock Knife with its Damascus blade and carbon fiber handle is a top-notch EDC option. The lightweight carbon fiber handle ensures a comfortable experience, making it a pleasure to use in various scenarios. While the blade's sharpness may require occasional maintenance, this minor drawback doesn't overshadow the knife's exceptional qualities. For those seeking a reliable and stylish EDC companion, the Civivi Elementum is undoubtedly worth considering.

  Overall, the Civivi Elementum is a stylish pick for anyone looking for a new EDC knife. With a price point of only $126, the Elementum is an excellent purchase and a testament to Civivi's quality.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Button lock, damascus blade, carbon fiber handles, folding knife

Target Market:

Those wanting a nice looking quality knife for a reasonable price

FNBs (Features & Benefits of this product):

  • Blade Length: 3.47" (88.1 mm)

  • Closed Length: 4.53" (115.0 mm)

  • Overall Length: 8.00" (213.1 mm)

  • Blade Material: Damascus

  • Blade Thickness: 0.118" (3.0 mm)

  • Blade Hardness: 58-60HRC

  • Blade Style: Drop Point

  • Blade Grind: Hollow

  • Blade Finish: Black Hand Rubbed

  • Handle Material: Marble Carbon Fiber

  • Handle Thickness: 0.43" (11.0 mm)

  • Liner Material: Stainless Steel

  • Locking Mechanism: Button Lock

  • Pivot Assembly: Caged Ceramic Bearings

  • Pocket Clip: Deep Carry Stainless Steel (Tip-Up, Right/Left Carry)

  • Weight: 3.19 oz. (90.5 g)

  • Carbon Fiber Backspacer with Hidden Lanyard Post

What other aesthetic options or finishes are available?

Tons

What others are saying?:

Ed @ Knifecenter.com  

fun flipper.

Was looking for carbon fiber handled knives, DCA on youtube convinced me to give this a try. Looks sweet, and the smooth flipping action was more fidget friendly than I expected. Blade shape is good for most cutting tasks. This knife convinced me that I need more Civivi Knives. The Elementum is a proven design, the pushbutton flipping action is slick, and the marbled carbon and damascus look really nice together. I appreciate the extra length over the original elementum flipper. Slickness of the carbon surface takes some getting used to, but as a result it is pants friendly.

Link to other reviews:

Nothing found on this particular model, plenty of regular Elementum reviews are out there.

Price point:

MSRP = $126.00

Retail = $107.00

I need it now! Availability:

Civivi, Knife Center, or Amazon

Our Rating:

Pros:

  • Lightweight Design

  • The knife is gorgeous

  • The button lock is extremely secure and I had no problems with it sticking

  • Extremely sharp out of the box

Cons:

  • The Elementum lost its edge quickly

  • This is more on me but I found the 3.5” blade to be a tad too long for my preference in an EDC knife but Civivi does offer a 3” model.

  • Another small gripe is the hinge got noticeably dirtier with lint than a lot of my other knives and I had to remove lint quite often.

Score: 8.50 Great

Surefire X300 Turbo

By: Shan Hemphill

  Surefire is known for supplying quality, robust lights that are made in the USA, and supplies heavily to law enforcement agencies. Surefire products have a lifetime warranty, and there are many comments on the Internet about how Surefire has quickly resolved problems. Surefire is also known to be slow to release new lights, so their Turbo versions of the X300 and Scout have been heavily anticipated since their announcements at Shot Show 2022.

  I obtained 4 samples of the X300 Turbo, allowing me to gather data from multiple lights, then compare versus some of the best in the industry.

Specs:

Lumens: 650

Candela: 66,000

Runtime: 1.5 hours

Batteries 2x CR123A

Switches: Ambidextrous push (momentary) / toggle (constant)

Water Protection: IPX7

In the box:

  Inside the packaging is the light itself, 2 Surefire-branded 123A lithium batteries, instructions, and rail keys depending upon whether you’ve purchased the “A” or “B” version. The “A” version utilizes a spring rail key attachment system, and as a result, the box includes an extra spring rail and a tool to remove. The “B” version includes an extra rail key. Both also include a battery door pin to help keep the door from opening unexpectedly. 

  Fitup of either version is easy, but be aware that this is a large pistol light. It fits on the majority of pistols that utilize a full size rail, but it sticks out beyond the muzzle on most full size pistols. It even sticks out beyond the end of my compensated Glock G19x.

  The X300 Turbo is exactly the same size as the X300 Ultra. That’s important because there are a million holsters for the X300U;  you should be able to find concealment holsters for IWB or OWB, and if you’re on duty using a X300U already, you can keep your existing retention holster.

  Even though the package is long, I have been comfortably carrying the pictured package AIWB. Yes, that means I appendix carry one of the longest pistol and light packages on the market. I do so in the Werkz M6 holster, but I carry in the deep position with a little negative cant dialed in. I find this quite comfortable and easy to carry day in and day out. While it’s not G43x small, it’s workable.

  The light takes two CR123A batteries. While many people now prefer rechargeables for their lower cost and higher output capability, I do appreciate prime batteries for their long-lasting power output, and that I can easily swap batteries while training. 

  I tested all 4 of the X300T samples for lumen output in my integrating sphere, capturing both the absolute maximum, and calculating the ANSI / PLATO FL-1 lumens (which average readings from 30 to 120 seconds). Here are my results.

I also captured candela using similar measurements.

  All the lights performed well, but I did observe some variance between them. This is typical of lights; the electronic components (especially the LEDs) can vary from light to light giving different readings. 

  It is interesting how the light seems to get stronger for about the first 15 seconds, then it levels out and drops off.

The competition

  Given the high candela output of this light, probably the best light to compare to is the Modlite PL350 using either the OKW or the PLHv2 head. The PL350 is similarly priced, and the OKW head is rated at similar candela output at a rated 69,000cd. Here are my measurements:

  As we can see here, the new X300 Turbo has significantly more candela than the Ultra, and has competitive output compared to the PL350 with the OKW head. This is impressive output from CR123A batteries.

  I measured candela at angle, which provides a graphical view of the width of light intensity. If wider angles have higher candela output, then the light has more flood. If a light has a peak, then drops off near zero, then it has all throw and almost no flood.

    In this case, you can see that the PL350 with the PLHv2 head has a fair amount of output up to 5 degrees. In comparison, the X300U is much flatter, showing in graphical terms how it provides much more flood than the other lights.

  I also gathered lumen data, which allows me to measure instant max lumens, and calculate ANSI / PLATO FL-1 lumens, and runtime.

In this chart, we see that the highest lumen is from the Ultra, which is no surprise given that light’s focus on output and flood. There are two Turbo samples here because sample 1 seemed to have an issue with runtime that I didn’t see in the other 3, so I included sample 2 as an example of how the majority of the units tested out. It’s good to see that the Turbo can run 1:15 still outputting almost 400 lumens. 

Practical Testing

I stood downrange and had each of the lights shone into my eyes. Excepting the Ultra, all of these lights were painful to look at and I had a hard time determining distance or position of the person holding the lights. From the camera angle, you can see that all of these lights provide a degree of flood, and each light has a slightly different color tint.

Summary

Here is a summary of the data shown here:

Based upon the data gathered here, I personally am upgrading from my Streamlight TLR-1HL to the Surefire X300T. In particular, sample 3 impressed me not only with output but also with a slightly warmer color temperature out of the group. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Candela is competitive with the best pistol lights, backed by the Surefire reputation and fits in existing X300 holsters.

Target Market:

Military, law enforcement, and citizens who want some of the highest throw possible in a pistol light.

FNBs (Features & Benefits of this product):

  • Feature: 66,000 advertised candela

    • Benefit: Provides high throw capability – can illuminate further out than most pistol lights

    • Benefit: Defeats photonic barriers such as auto glass, headlights, and dark corners better

    • Benefit: Helps control subjects better by blinding themselves

  • Feature: Same form factor as the X300U

    • Benefit: Fits in all your existing X300 holsters

  • Feature: Retains X300 existing momentary and constant switches

    • Benefit: Operator can select between momentary activation and constant activation

  • Feature: Surefire build and reputation

    • Benefit: High quality made in the USA product with an excellent warranty

What other aesthetic options or finishes are available?

Comes in “A” and “B” flavors. The A version uses a sprung lever & key to lock in to the rail. The “B” version uses a key but has a screw to clamp to the rail. My personal preference is the “B” as I can clamp it down and eliminate rate. However, many people also have good success with the A version by using the correct key, or by putting some electrical tape on the top to reduce or eliminate the rattle.

Comes in black and tan.

What others are saying?:

T-Rex Arms:

Surefire was able to change the throw of this light without changing the external dimensions or size of the light itself, so you’ll be able to use with the holsters out there. They were able to squeeze this power out of CR123A batteries.

Big Tex Ordnance: 

“Still the standard, I regretted trading up to the 1000lm from the 500, this has the right spot and a nice flood, fits my existing setup and I might be losing it but the switches feel a lot easier to manipulate than the ones on the 1000.”

“Great light; amazing throw, intense hotspot, but still has a decent amount of flood. This is nearly as good outdoors as my Cloud Defensive Rein while being much smaller and still being the same size as my X300U. I don’t think you need to run out and replace all your old X300s and TLR-1s, but if you’ve got a handgun that needs a light, this should be a no-brainer.”

Link to other reviews:

https://youtu.be/Ra2j0mo_5zU

https://www.lowlightdefense.com/surefire-x300-turbo-the-king-reclaims-the-throne/ 

https://www.reddit.com/r/tacticalgear/comments/wjrnue/x300_turbo_is/ 

https://www.youtube.com/watch?v=9Ne1U85IEBA 

Price point:

MSRP = $379   

Primary arms = $322   

Big Tex Ordnance = $322

I need it now! Availability:

Seems out of stock everywhere. I think Primary Arms might be a good source.

Our Rating:

Pros:

  • Some of the highest candela in this segment. 30 seconds in, my 4 lights averaged 61k. Some people think candela is only for rifles, but it is also useful for defeating photonic barriers such as when shining a light through a car windshield and against the car’s headlights. Candela also helps blind a subject, making it difficult or impossible for them to see you.

  • Still has decent flood, similar to the Modlite OKW. Not as wide as the Ultra, but testing shows it sufficient for most indoor operations. Output is good, and for indoors it is possible to shine the light up (umbrella lighting) or down against the bottom of the wall (baseboard) to help diffuse the light.

  • Consistent output: our testing shows 96% output consistency from run to run. Some lights are much lower, down around 85%. 

  • Generous runtime of 1.5 hours

  • Utilizes existing X300 holsters, and literally everyone makes holsters for pistols with the X300.

  • Switches provide both momentary and constant activation, and do so intuitively.

  • Utilizes common CR123A batteries.

Cons:

  • This is an expensive light at just over $330 street price.

  • Switches are adequate and provide both momentary and constant activation, but they can feel stiff or sticky, and the momentary activation pokes my thumb  under recoil. 

  • Some people will see the high candela and lack of flood as a reason not to run the light. My experience is that high candela lights do restrict some of the peripheral view, but I know how disorienting a high candela light can be when it’s aimed directly at my face. I can overcome most of the concerns about “blinding myself” or “it’s too focused” through training.

  • It’s still a large light, one of the largest on the market. 

Score:

This is now my EDC light on my Glock 19x. 

I rate it at 8.50 - Great. 

Favorite Link: Geek out on all the data HERE

Smith & Wesson M&P 2.0 10MM

Written by: Rusty Odom

1MM MORE PLEASE

  As maybe you can tell this article is about my review of the new S&W MP 2.0 10MM. Now that's a mouth full, but with Smith & Wesson you sometimes need a secret decoder ring to find out what gun you have. If you want to know more about the S&W decoder ring, check out the Handgun Radio podcast. These guys do a fabulous job getting you through the number codes of Smith.

  So let's begin with how it was received, when I showed up to my trusty FFL I got the generic cardboard box that most all of my S&W’s come in. I was not impressed by the packaging at all. Unlike when I have picked up my Sig’s, Caniks’ and even Glock’s they have all been in a hard plastic box that will double as a range box. Inside you had your typical owner’s manual, paperwork, gun lock and of course the pistol and two 15 round magazines. There are also several different palm swell back straps to fit most anyone's hand. There was also a bag filled with numerous optic mounting plates labeled with numbers. If you’re mounting an optic you will have to use the instruction manual and know what your optic’s footprint is to find the right plate. The particular model I bought has a SKU#13388, it is the 4.6” barrel, manual thumb safety and optics ready.

  Starting with the frame and working my way up I am going to give you a brief description. On the grip, where the magazine goes in, you will notice a cutout on both sides for easy stripping of the magazine if a failure happens. There is a takedown tool tucked neatly in the handle. Just rotate it and it comes right out. This also lets you change the backstrap panels out if you need to adjust for hand size. The stippling on the grip is nice and tacky, it is different from any other firearm I have and definitely felt good. The trigger guard is not square like a lot of other pistols, it is a little blocky, but has a nice round edge for the larger hand people to get a nice high grip. It has a nice undercut at the area where the trigger guard and grip come together. This helps out with the old “Glock knuckle” I get on my Glocks. Moving up the frame you will notice a 1911 style thumb safety, I would have not initially bought this model with a thumb safety but, that is all they had with the longer barrel length I wanted. The safety is ambidextrous and easy to get to and is not in the way. If you are a 1911 shooter you will feel right at home. It is tactile and has a nice sound when engaged and disengaged. The slide release is nice and tucked in with a raised fence around it. You might think of it like most AR lowers that have their controls tucked in. The frame also has an accessory rail at the end to accommodate your chosen gadgets.

  The slide has nice cutout scallops on the rear for easy gripping. The front of the slide also has a nice cutout, if you're a press checker you should like them as well. They all should be easy to grab with gloves on. The pistol comes with nice suppressor height sights that also make co-witnessing with a dot optic nice. The only concern I have with the optic cutout is the plastic plates for mounting your optic on. I would like to think there was a lot of R&D that went into it so that the plastic doesn't give and let the optic come loose and smack you in the forehead. I mounted a green dot optic from Swampfox, it is their Justice optic, I also put their Ironside Shield on it to protect the optic. This did raise the optic up a bit so the sights are just a little below the dot. 

  The takedown lever is fairly easy to use, but I would read the instructions before attempting it. Smith & Wesson has two different ways to do this procedure. Follow all normal safety procedures, lock the slide back, rotate the lever downwards. From this point you can use the disassembly tool located in the grip to push the sear down, then you can just pull the slide off. The other option is to rotate the lever down, let the slide go forward and then pull the trigger like a lot of other striker fired autos. The slide will then just come off the end. Reassembly is the same procedure just in reverse. 

Now let's get to the specs and then what I like and dislike about it.

  • Height : 5.6”

  • Length: 7.9”

  • Weight: 29.6 oz

  • Width: 1.3”

  So as you can see the specs are not too far off than any other full size striker fired handgun on the market. The pistol feels great in the hands, it has a natural pointability, the stippling is nice and stays in the hands. The sights are awesome, nice and tall and easy to pick up. I mentioned the thumb safety already. Now let us talk about the trigger. I have read other reviews and watched youtube videos about the new 10MM. I so wanted my trigger to not be, well mush on my finger. I dried fired my pistol for a week before I sent the first round down range, I practiced trying to find the reset and take up, just like I do on all firearms. Plain and simple, the trigger stinks, it is bad, it is like squeezing a french fry with your finger on the edge of the table. It just fell apart. There was no audible reset and barely a feel for it as well. Take up was ok then it just went mush. I want to say this is the first M&P I own, so I can't compare it to others. The other ones I have fired all had replacement triggers in them. So my solution to this problem was to dry fire some more. I did it everyday for about a month, so now I know where it is going to fall apart. 

  The shootability of the pistol is great despite the trigger, I handed it off to my 14 year old daughter and she ran it like a 9mm. The look on her face when she turned around was great, she could have caught flies in her mouth. I loaded the mags with Freedom Munitions 180gr FMJ, and shot about 300 rounds. The pistol ran great, it never missed a beat. Then I loaded up some Underwood 180gr bonded jacketed hollow points…….. This is where it was different, there was a big difference in recoil, it was still very comfortable and manageable. You could tell you had a hold of a hand cannon. This is where the memories of shooting my 44 mags flashed back, except I had 15 rounds of thunder in my hands. I had so many thoughts rushing through my mind, how many hogs can I take at once, can I double tap a deer at 50 yards, the bear won't have a chance once it is treed, lord have mercy if someone breaks into my house with this beast next to the bed. Lets just say if you have ever fired a center fired magnum revolver and liked it, you are going to love this. I love it so much I think I am going to name this pistol. I will take suggestions, just find me on Instagram @6gundaddy and let me know what a good name should be. Oh back to the review, once I started shooting the trigger issue went away. It is still bad, but you forget about it. I just trained around it. I think it goes with any firearm, that if you know the manual of arms, its strengths and weaknesses, and train with it, you will be just fine. Do I think Smith & Wesson should have put a better trigger in it? YES I do! With the technology that is out there today and so many aftermarket triggers, it could be better, but it is what it is. If everything was perfect I would not be writing this article.

  To end the review, I am giving this pistol a above average review, as you can tell I do not like the trigger or packaging, but that is just my personal opinion. It is going to be my primary hunting firearm for running hogs, black bears and deer in southeast Tennessee. I have always liked the challenge of hunting with a handgun. I do it every year, I swap out between my Blackhawk .357 and my Ruger Security 6 .357. With proper ammunition and training I think this pistol will fit into that notch that a lot of guys are arguing about online, the old 45 ACP or the 9MM. I just say let's split the difference, forget about the 40 S&W and call the 10mm the new big boy on the block in auto loaders. I see why there is a cult following for this caliber, it is fun, recoil is fun but not too bad, it can play a multi role of self defense, critter control on the farm or backpack hunting. This caliber will not let you down. 

Just a few side notes, if you buy one, you do not have to hunt for holsters, The frame size is the same as the S&W MP 45. So that is a plus unlike a lot of other new firearms on the market. The safety, it can be removed and you can order a safety block plug that fills the gap of where the lever was. I did do this one to mine because safety levers on striker fired pistols are not needed in my opinion. You can order the plugs for just a few dollars from just about anywhere.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Bigger than a 9mm

Badder than the 45 ACP

Blows the 40 S&W out of the water

Cult like following

Target Market:

Dedicated reloaders

People wanting something with magnum like power in an auto loader

Hunters

EDC

Those who like recoil

FNBs (Features & Benefits of this product): 

Reliable

Easy to shoot

Holsters are the same as the M&P 45

What other aesthetic options or finishes are available?

Compact version for CCW

10 round version for communist states

A version without a external safety 

What others are saying?:

Low bore axis

Smooth round contour

Grip texture is great

Link to other reviews:

Outdoor Life

Hammer Striker

Price point:

On par for most comparable striker fired pistols from a big company

From $599 to $665

I need it now! Availability:

Brownells

Our Rating:

Pros:

  • A quality product from the UA

  • 10mm ammo is available

  • 15 round magazines

  • Great sight

  • Grips are excellent

  • Optic ready

Cons:

  • Trigger is bad

  • Packaging with mine could have been better

  • Unsure of the optic mounting plates at this time

Score: 7.00 Good


Brash Tactical

  Brash Tactical has come into the gear/accessory market with a bunch of products. These products are made in the USA with mostly American sourced materials. Brash Tactical sent the Gun & Gear Podcast crew a bunch of stuff to try out. We have been using the stuff for some time now.

  The products Brash Tactical sent us were belts and slings. We will have a short section discussing the products each of us received.

Chad:

Double Duty + Kydex Leather Belt - Black: $49.99

  This belt, as the name says, is a double layer, 1.5” wide, leather belt with a kydex insert for stiffness. The belt uses 2 layers of 8 oz American steer hide that is also tanned in America. Brash Tactical then sews these two pieces over the kydex. The US made steel roller buckle is attached in place by looping the outer layer of leather through it and then riveting the leather to hold it in place. Brash Tactical uses ¾” hole spacing on the adjustment holes.

  I have been wearing this belt everyday since it arrived. It is a beast of a leather belt! The belt is around 5/16” thick. I really do like the thickness, it will hold up just about any pistol you decide to carry on it. Where the buckle attaches, there is only a single layer of leather, this makes it easier to use, as well as not making it as thick where the tail rides. The one problem I have with the belt is that the kydex seems to have either set or cracked, where it makes a sharp turn around my IWB holster. It doesn’t affect the belt any, it just looks a little odd. The belt still looks very good and is comfortable to wear. Next time, I’d probably opt for just the non kydex double duty belt, or the Hybrid like Zane and Rob received. 

Deluxe Quick-Adjust 2 Point Sling - Multicam black w/QD’s: $19.99 

  Brash Tactical’s Quick-Adjust sling is a 1” wide, mil-spec webbing, 2 point sling. It comes in a variety of colors or patterns, they sent me Multicam Black with the optional QD’s. This sling uses a quick release steel cam buckle. With the paracord handle that is attached to the cam buckle, you can easily make the sling shorter or longer. Just pull the tab away from you to lengthen the sling. Or pull the buckle up and in toward you, to make the sling shorter.

  The Quick-Adjust sling is easy to use. I found that it works better if the attachments (QD’s) are spaced farther apart on the rifle. So one up by the muzzle, and the other at the rear of the stock. This sling is a little awkward if the mounting points are close together. However, the sling does what it is supposed to do. The 1” wide webbing is a little narrow for my liking, or it needs padding. But for a US made sling for $20, you honestly can’t go wrong.

Loop-Adjust Sling - Black w/QD’s: $17.99 

  The Loop Adjust Sling is also a 1” wide, mil-spec webbed, 2 point sling. The difference is the hand loop that is used to adjust the length. Just pull/slide it up or down to shorten or lengthen the sling. It really is that simple.

  Brash Tactical Loop Sling is one of the easiest slings to adjust. I really do like this sling. Its adjustments are just so easy and intuitive. I was worried that because it was so easy to adjust, it would loosen up. That was not the case, it is very tight when in use. Yes, it also uses the 1” webbing, so it can dig into your shoulder a little bit, but that’s only after extended use. For a $18 US made sling with QD’s, how can you really go wrong.

 Rob:

Hybrid Leather and Nylon +Kydex Belt: $39.99

  When I received the belt, the buckle prong was on the wrong side of the frame.  This meant that you could not insert the belt through the punch holes.  I reached out to Chris, sent him a few photos, and he sent me a return receipt to send the belt back.  A little over two weeks later I had the replacement with the prong on the correct side,

The belt felt strong and fit well. I have been using this belt for two months and have no major complaints so far. The kydex insert supports full size pistols with ease and this is a solid belt. 

  My main issue with this is the kydex stops just before the punch holes.  My experience with similar belts is, after time, the holes will start to open (stretch) causing the belt to slide down.  My personal preference is their double duty belt, where the Kydex takes up the full length of the belt, but that is just a preference. (Editorial note: The kydex doesn’t run through the holes on the Double Duty belt, but it is two layers of leather, which can help with this)


Tony:

Loop-Adjust Sling: $17.99 

Single Point Sling: $29.99

  I received the Brash Tactical Loop Adjustable sling and their Single Point Bungee sling. The 2 point sling was installed on my Hi Point 995 carbine in a High Tower Armory MBS 95 chassis. The sling worked well with the bullpup design, the adjustment allowed the gun to be brought tight into my body when needed. It's easy to manipulate. 

  The con for the Brash Tactical 2 point slings is it lacks width. That lack of width causes the 9 pound carbine to quickly become (at first) annoying and eventually irritating on my shoulder. Taking an all day class or carrying it for a few hours would become distracting if not painful. It needs to be wider, thicker and maybe have some padding. For short range trips it won't bother most people. 

  The single point bungee sling was way too long and had no adjustment in the bag for length. I installed it on my 10/22 in the High Tower Armory 90/22 chassis that I use to introduce kids to firearms. The sling suspended the firearm below my belt buckle. Regardless of placement it hung too low to be of any practical value. If there's a method of shortening the sling it would work well. 

  For multi hour use, I wouldn't recommend either due to the negatives.


Zane:

Zane’s stuff will be added at a later date, or when he finishes it.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

American made gear

Target Market:

Those wanting American made gear at an affordable price

FNBs (Features & Benefits of this product):

What other aesthetic options or finishes are available?

Belts, slings, and gun cases

What others are saying?:

Mixed reviews on Amazon

Link to other reviews:

Amazon

Price point:

MSRP = See Brash Tactical’s website

Retail = See Amazon

I need it now! Availability:

Brash Tactical or Amazon

Score: Somewhere between a 6.00 and a 7.50 - It really depended on the product

LaserMax CenterFire Laser for the Ruger LC9, LC9S, LC380, and EC9S

Written by: Rich S.


I would start by saying if you have ever been to Houston Texas in the summer, you’ll understand this more than others. Houston is a humid and oppressively hot city most of the year and a full size or even some compact carry pistols just don’t conceal well under the shorts and t-shirt required to deal with the heat. You see I am not a large fellow, so size matters (That one's for Zane). For me my sweaty summer day EDC is the Ruger ec9s micro 9mm.

I really liked this little gun; you’re not going to be knocking down prairie dogs at 50 yards, but it’ll do the job at 10-20 yards. The sights on the Ruger are milled into the slide and boast the same black color as the rest of the firearm. I can tell you that it did become apparent very quickly in a dark parking lot with a target in dark clothing that I could not pick up the front sights. As I said earlier, I like the size and have become proficient with this little guy but after this incident things needed to change.

  I sought out a few options to remedy the issue from rolling with my Sig on my hip to searching for a replacement to fill the role of “board shorts gun”. I settled on finding an option that would allow me to keep the micro 9 size and weight I like so much but allow me to easily acquire a target in an off platform firing position. What I found was the LaserMax CenterFire.

This product is made specifically to fit the contours of the Ruger micro line of pistols and once installed looks like a factory accessory! Its red laser has simple adjustments, is easy to install and has an ergonomic on/off button on each side. 

I have been using this little laser for over 18 months and have about 5,500 rounds through the gun with it attached. The Lasermax has held zero even with the beating it has taken as an everyday carry on a sometimes-sweaty dude. It’s made of a tough nylon material with an ambidextrous on/off button and fully adjustable windage and elevation. The centerfire laser weighs in at 1oz and a 4-hour battery life and a 5-year warranty. You can buy direct from Lasermax for an MSRP or $129 or pick one up on Amazon for around $90.00 - $100.00. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Laser for Ruger line of pistols

Target Market:

Anyone with a Ruger LC9, LC9S, LC380, and EC9S looking to add a laser for dryfire practice or everyday carry

 FNBs (Features & Benefits of this product):

  • Compact design

  • Ambidextrous on/off button

  • Fully adjustable windage and elevation

  • Rugged design 

  • Weight: 1oz

  • Dimensions:3.5”x1.5”x.75”

What other aesthetic options or finishes are available?

None 

What others are saying?:

4.6 out of 5 stars on Amazon

Link to other reviews:

LaserMax CenterFire Laser (Red) CF-LC9 Review

Price point:

MSRP = $129.99

Retail = $100 on Amazon

I need it now! Availability:

LaserMax or Amazon

Our Rating:

Pros:

  •  Fits like a factory installed accessory

  •  Ergonomic design

  •  Ambidextrous 

  •  Price

Cons:

  •  Niche product

  •  Battery accessibility 

Score: 7.5 Good - for what it is 

 Favorite Link:  (Ruger LCP and LC9 with LaserMax Centerfire Laser  (Love the infomercial voice!) 

ESEE Xancudo

Written by: Rusty Odom

  With the last year being so hard on us firearms enthusiasts finding ammo, I went back to my roots and started getting back into knives. I have a background of being a machinist, for about 10 years, prior to becoming a paramedic. I worked a lot with tool steels in various states of hardness, stainless steel, Starrett stock, hot rolled, cold rolled and so on. I have hardened all kinds of steels, ground them into cutting dies for the smallest of tasks up to 200 ton presses. I am not a metallurgist, but I do have a good base knowledge enough to be dangerous. Here is a term I like to use, “J.E.D, just enough to be dangerous.”  So when I go to buy a knife I look for several things or a combination of 3 things, blade size, blade steel and carry method. With that being said, as of writing this, I have found my favorite fixed blade.

  The ESEE Xancudo, a fixed blade, light weight, easy handling knife with a 3 inch blade. I have numerous ESEE blades, most of them are in the Randall Adventure Training or R.A.T line. Most of these blades are a 1095 carbon steel blade that are easy to sharpen, keep a good edge, can be used like a plow mule, but also needs care of the edge so it doesn't rust. Then while surfing the internet I came across the Xancudo, I was smitten with this blade from the start. First it has a new blade steel for the Esee line, S35VN, which has a Rockwell hardness to 59-60 rc. It is small enough to work with one hand and is very well balanced. The blade is the right width at .125” or ⅛ of an inch. It weighs in at a whopping 3.8 ounces in the hand or 6 ounces total with the sheath. The blade comes with a stone washed finish, 3D G10 scale handles, and for the best part, it is made in the USA.

  The blade is a simple straight belly design with a flat back, small thumb texturing on the back, the finger choil is ground into the handle and gives a great one hand grip on it. The G10 scales are 3D cut, which means it is grippy and textured in all the right spots. The handles just seem to mold to your hand and making using it very nice. The handles are secured with allen screws and can be changed out. My particular knife is what some would call a high angle use blade because of the oval hole cut into the rear of it. You can wrap a piece of rope through it or attach a carabiner with a lanyard, so you wont drop it. They also have the option to have it without the hole. Both blades are a full tang construction through the handle. 

  First off I have to say I am not a fan of the ESEE sheaths, they serve their purpose and do their job well. But for me I am a sheath snob, I will call around and get a sheath made or try and find a company that already has them in stock. It is the generic style that most of their brand come with. It is a vertical carry, injected molded sheath with a spring clip on it. It also has holes so you can use some cordage and secure it to your pack. I went to RK Custom Kydex and ordered a new sheath and used some button style soft loops to carry it horizontally on my belt. This makes it easier for me to be able to grab it with either hand. 

  Let's get to the nitty gritty of how this knife performs. Right out of the box the Xancudo was sharp, I mean the hairs on my arms were jumping off before the blade got to them. I got this knife right at the end of summer and couldn't wait until hunting season to see how it performed. I was not disappointed at all. On two different occasions, while hunting, my 14 year old daughter harvested a couple of wild hogs. So this was the best time to put the knife to work. It cleanly field dressed the swine on the creek bank with little effort of pressure on the blade. During the skinning process it was like using a scalpel, matter of fact that is kind of how she held it. With just a little bit of motion and pressure the blade gilded through the hide, muscles, tenderloin, around the rib cage of both pigs. I examined the blade after each use and it was still razor sharp. I even put the blade back in the sheath and forgot to clean it, when I pulled it back out there was no rust to be found. I was very pleased with this. If it would have been a 1095 steel blade it would have been rusted and corroded from the blood. 

  So would I recommend this knife to anyone? Yes, I would! Knives are something that can last a lifetime unless you are Tony or Zane (Marines), the blade steel is forgiving, it is great for EDC, Bushcraft, hobby work, wearing around your neck, vertical, horizontally or sticking in your pocket, or securing the sheath with a  piece of cord around your belt so it stays and doesn't hit the ground when you pull it out. I have several ammo cans full of knives that have been given to me or I bought on a whim, they live in those cans because my needs have changed, blade steel has gotten better. I no longer needed a 10 inch Bowie knife or a 7 inch Ontario RAT on my belt. So for what I do, this blade hits the sweet spot. Now, not to scare you off, but here is the thick of it. The price might be more than some are willing to pay. Not me, it is always Christmas because I buy my own gifts year round. I think I made up a holiday when I bought this one though. The price on the ESEE website is $186.00. I bought mine at Knifeworks for $106.95. Now that is a deal for a knife that you can pass down to your kids. On a side note, Knifeworks offers a payment plan with a 3rd party company called Sezzle, they are interest free and break up the payments into 4 instalments. So the knife just started looking better, read on for more.

So let us recap this blade:

Overall Length: 7.12”

Cutting edge: 3’

Blade thickness 0.125”

Weight: with sheath 6 ounces/without 3 ounces

Sheath: Molded or injected plastic if some sort

Finish: stone washed

Handle: 3D G10

MADE IN THE USA

WARRANTY: 

ESEE knives are made with absolute attention to detail using the finest raw materials and care during the manufacturing process. We stand behind our knives with a 100% unconditional lifetime guarantee. If your ESEE knife should ever break, we will repair or replace it. This warranty follows the knife throughout its life, anywhere in the world. No sales receipt or warranty registration required.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Perfect for EDC, Bushcraft

Target Market:

Outdoor enthusiast, hikers, hunters or anyone wanting a good fixed blade knife

FNBs (Features & Benefits of this product):

  • The warranty says it all. LIFETIME, NO MATTER WHAT! 

  • Great corrosion resistant new age stainless blade.

  • Easy to sharpen

  • Perfect for detail knife usage

What other aesthetic options or finishes are available?

Two versions

XAN2-006 (no hole in handle)

XAN1-006 (hole in the handle)

Replacement G10 grips for $22.95

What others are saying?:

I did not find a lot of other reviews for this knife. There are some but not well detailed. 

Link to other reviews:

Prepper Del on YouTube

Knife News

Price point:

MSRP = $186.00

Retail = $106.95 at Knifeworks.com

I need it now! Availability:

ESEE, Knifeworks, Amazon

Our Rating:

Pros:

  • Razor sharp 

  • Easy to sharpen 

  • Corrosion resistant 

  • Scales are interchangeable 

  • Lightweight but built like a tank 

Cons:

  • The sheath is not comfortable for those with love handle 

  • Could use a dedicated lanyard hole at the rear. 

  • Possibly too small of a grip for those with larger hands 

Score: 9.00 Amazing

The Classic Ruger Security 6

By Rusty Odom

The Ruger Security 6

The Ruger Security Six has a long lasting place in my mind, it was the first magnum revolver I ever fired and probably what sent me on the path of firearms in general. My father carried a Security 6 for as long as I can remember. His was a 6” barrel version, he loved it. After his day of shooting I always got to clean it, this is where I learned how to take it down all the way to the frame. The coolest part was I didn't need any tools to do it and I got to tactically fondle the revolver. 

So now to present time, I was at a local gun store/pawn shop looking around to see what was laying around when I went to the end of the counter, and there it was, a four inch version of my Dad’s gun. It was glowing from under the scratched finger print covered glass counter. I stood there patiently waiting until it was my time to be served. When I got it out the first thing I noticed was that it was sporting a pair of Pachmayr grips, the lock up was tight, the cylinder came right out with just the right amount of pressure after releasing the latch. It rotated smoothly and was concentric. The old gun had just a bit of holster wear on the barrel and the frame. No rust was noticed anywhere on it. The cylinder still had a lot of bluing on the business end and appeared to not have been fired a whole lot. 

Now it is history time for this line of Ruger revolvers. These are all double action revolvers, introduced in 1972 and ran until 1988. They were designed to be issued to law enforcement, military and personal defense. The Security 6 came in a variety of calibers, barrel lengths and two different finishes, blue and stainless. Barrel lengths ran 2,75”, 3”, 4” and 6”  Ruger made these in 38 S&W, 38 Special, 357 Magnum and 9mm Luger. They all had a 6 round cylinder and adjustable sights. These revolvers were medium sized and were designed to be a competitor to the Smith Model 19 and the Colt Trooper. Ruger essentially built a heavy duty large frame revolver in a medium size that weighed 33.6 ounces in the 4” model. The top strap of the Security 6 was thicker than that of the Smith, a larger cylinder and a barrel shank. They were able to design the lockup to be beefier and leave more metal to support the weaker parts of other guns. The best part of these guns were they didn't have side plates, Which made it stronger and to take it apart for service, no tools were needed. The hammer spring is a coil spring instead of the old leaf spring design. All of the barrels on the “6” were all bull barrels with a vent rib with Baughman front sight pinned in. The rear sights were adjustable. The Security 6 was the first revolver to incorporate the hammer transfer bar safety system. There were several spin offs of this revolver including the Speed Six and Service Six. If you didn't know by now this is the grandpappy of the modern GP 100 series of guns. 

The Security 6 was issued to a number of government agencies including the US Postal service, INS, and the Border Patrol. It rode in the classic basket weave holsters of hundreds of police departments across the nation, one reason was it was cheaper than its competitors and it was a tank. It could handle a steady diet of the heaviest 357 magnums without having to have parts replaced. 

With my “6” I went online and ordered an original pair of wood grips, bought a Triple K holster, and two speed loader pouches. I primarily carry mine when I am out in the woods and during deer and bear hunting season. I reload for it and I push a lot of heavy match grade hard cast bullets out of it as well as Buffalo Bore 180 grain out to 1400 fps. I wouldn't do this with a Smith, at all. It is an accurate handgun, it fits well in the hands. The wood grips do hurt a bit with the heavier loads but it is still controllable with a good grip. With practice 50 yard shots free hand on 6 inch steel plates is easy, and with a proper rest and practice 100 yard shots can be done. The latter should only be done with a lot of practice and the right conditions. 

For personal defense this gem will not let you down. A good holster, a thick belt and you should be good to go. There are so many different load choices for the 357 magnum and of course you can shoot 38 special for those that are recoil sensitive. If you are lucky enough to find one in 9mm or a 3” barrel model you will have found a rare jewel. So I guess what I am getting at is to not look over the used gun section of the gun stores. You might find your gem in the rough just sitting there.  Do not ever hesitate to use a revolver as a primary weapon, if you train with it. They will sling lead all day and will in my opinion might make you a better shooter because of the amount of ammo you have loaded and mastering the double action trigger pull.   

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Robust medium size revolver

Cheaper than competitors

Good history with law enforcement

Target Market:

First time gun buyers after the Covid panic buying

Range gun

Home defense gun

Handgun hunters

Wheel gun lovers

FNBs (Features & Benefits of this product):

  • Can handle a steady diet of high pressure magnum loads

  • Tool less takedown

  • Adjustable sights

  • Beefier cylinder

  • Full underlug barrel

What other aesthetic options or finishes are available?

38 SW, 3.8 Special, 9mm luger, 357 magnum

Stainless steel and blue

Various barrel sizes

Link to other reviews:

https://www.americanrifleman.org/content/a-look-back-at-the-ruger-security-six-revolver/

Price point:

No longer manufactures, but can be had from $275 and up

I need it now! Availability:

Check local gun stores, pawn shops and online retailers

Our Rating:

Pros:

  • Pointability

  • Solid frame with no side plates

  • Stronger lock up

  • Tool less takedown

  • Adjustable sights

Cons:

  • A bit on the heavy side

  • Lack of holster options

  • Not made anymore

Score: 8.50 Great

85.jpg

Buck 110 & Slim Pro

By: Rusty Odom

THE BUCK 110 original and SLIM PRO

This review is about the Buck 110 Slim Pro folding lock back pocket knife. As a young kid growing up in Tennessee, carrying a pocket knife was second nature. I can remember at an early age, maybe 6 or 7, having a classic Buck 110 with the ebony handles, classic brass bolster, solid lockup and unlock of the thumb button. I don’t know what I ever did with that particular knife but I wish I had it now. I can remember the heft it had in the pocket of my husky corduroy jeans. Many children nowadays will not remember those jeans, the ones that built up static electricity when you walked and your thighs rubbed together. You know the ones, they had double layered knees that would never wear out, even if you were dragged behind your dad’s pickup truck. Now back to the knife, the Buck, the heavy weight, built like a tank, you could dig with it, hammer with it, pry with it, but it was made to cut. I wouldn't suggest doing any of the other things listed besides cutting, but man what a knife. I don't know where mine came from or even what it cost at the time, but it was worth a fortune in my eyes as a kid.

The 110 was designed in 1963 by Al Buck, for sportsmans looking for a sturdy folding knife, for those that did not want to carry a fixed blade. This model knife has been the number one selling knife in the world since it was first marketed, something has to be said about a design that has lasted almost 60 years.

The lockback mechanism is that works off of a rocking bar that locks against the blade when opened all the way. I have cut myself more than once with a folding knife that didn’t have a locking blade because i was not using it the right way.

The original 110:

Closed length 4 ⅞” long

Blade length 3 ¾” long

Blade thickness 0.120 (almost ⅛”)

Weight 7.2 oz

Blade material is 420 HC (high carbon stainless steel)

Ebony handles

Brass bolster

Black leather belt sheath

Price $55 to $79

Now to the new era of the Buck 110, the Slim Pro Series:

The 110 Slim Pro is an improvement on the original 110, in my opinion it is a EDC gentleman's knife. It has all the traditional features of the original but as the name states, it is slimmer, comes with a decent deep pocket clip and a thumb stud. The pocket clip is also reversible for the lefties out there. The blade is S30V stainless, which has better edge retention, hardness and corrosion resistance then the original 420. Now both are great blades, the 420 material has been and is still being used on all major brands of knives. (https://knifeinformer.com/discovering-the-best-knife-steel/) I inserted a link if anyone is interested in reading over the specs of the different knife blade materials. To the common person it might as well be Greek unless you have some kind of metal working or metallurgy background. I myself used to be a machinist in my younger days so I understand it somewhat.

The 110 Slim Pro:

Overall length 8.625” (8 ⅝”)

Closed length 4.875 (4 ⅞”)

Blade thickness .0120”

Weight 3.4oz (almost 4 ounces lighter than the original 110)

Handles are Micarta or G10 material

Pocket Clip

One hand opening with thumb stud

Price $94.00

So to compare these two knives almost seems like comparing apples and oranges as the old saying goes. But I can tell you I have been carrying both knives on my person for several months. I have been cutting various items like cardboard, rope, myself, and then and I mean then I had the perfect time to test them out. A coworker of mine was running emergency traffic while driving an ambulance, when a nice buck stepped out in front of her. I received a phone call around 8:30 PM telling me she had just had an accident in the ambulance and hit a deer. So the first thing that came to my mind was, is the deer salvageable. I can see where everyone is going with that statement I just made. But deer meat to me is like caviar to a Russian. I knew she had to be okay because she was calling me. I wasn’t that uncaring, I knew where the conversion was going to go anyway so I just brought it up first. So after getting the general location of the accident, loading up my Plott hound to track it, my 7 year old son and my 13 year old daughter, we were off. As soon as we located the deer about 100 yards off the roadway, I realized the only knife I had on me was the 110 Slim. So after doing a pretty good trauma assessment and realizing it looked pretty good, it was time to go to work. The knife cut through the hide like butter, all the good stuff came out intact which made me feel good about the meat. After getting it hung up on the kids swing set I let it hang over night and gathered the tools of the trade for the next morning's work. I almost started out with my Cutco hunting knife that I have been using for over a decade but decided to use the Bucks. (How Ironic) I skinned the entire deer with the Slim Pro and it was still pretty dang sharp after that chore. I then swapped to the original 110 and went to town disassembling the various quarters of meat. I did notice that the handles on the original got pretty slick with bloody hands and I lost my grip on the handle a few times. I took the Slim pro and hit the blade on an Arkansas stone to straighten the edge up and went back to cutting meat. With the Slim being a good bit lighter and of course slimmer I had less hand fatigue. The micarta handles gave a more secure purchase with wet hands. After all of the processing was done I went to the cutting board and started cutting up jerky strips, round steak, tenderloins, backstrap etc with both blades. I really liked the weight of the original while making cuts through bigger pieces and the Slim Pro for the more delicate cuts. They both performed great and honestly I couldn't tell a difference in the material that the blades were made out of, I think it all comes down to personal preference to which knife you want to use.

Now as an EDC knife I have to take the Slim Pro, the pocket clip, the knife being lighter and thinner gives it a huge plus in my book. The original comes with a black leather belt sheath to tote it in or you can put it in your front pocket. I have carried it both ways and I am not a fan of having it jumping around in my pocket, it seems to bind up and just uncomfortable to me. I don't mind the belt sheath, but sometimes I have a lot of stuff already attached to my belt and the weight difference between the two and not having a pocket clip, it loses an advantage to me. So this all goes back to what you are going to do with the knives, how you are going to carry them and what your primary use is.

I have to say that I have really enjoyed carrying the 110 Slim Pro for months now, it was razor sharp out of the box, I love how it sets deep into my pocket and the clip is secure. It is a little stiff to open unlike some of the tactical folders I have and on the market, but it is not a tactical knife. This jewel is an EDC that you can open with one hand, it will cut as good or better than other knives on the market in its price range. It still holds that classic original clip point blade with a solid lockup that Al intended with the first model back in 1963. I consider this a blade of all occasions, a do most blade, a gentleman's knife that doesn't mind getting dirty and putting in a hard day's work. If you want to know the best part about both of these knives are? They both are 100% American made with a lifetime warranty. So you choose which one you want, you won’t go wrong either way.

Insider Reviews - 8 Key Points

Claim to Fame

  • Best selling knife since 1963

  • American made

  • Classic Style

  • Sharp

Target Market:

  • Dedicated knife people

  • Hunters

  • EDC

  • Those who like quality

FNBs (Features & Benefits of this product): 

See above in review section

What other aesthetic options or finishes are available?

  • Different material for handles

  • Aftermarket sheaths for belt carry (cross draw)

  • Stainless Bolster for original 

What others are saying?:

One knife for a lifetime.

Beautiful classic, very sharp.

Great knife, all American made

Price point:

MSRP:

110 Hunter - $55.00 - $79.00

Slim Pro - $94.00

Retail:

110 Hunter - $44.99

Slim Pro - $89.99

I need it now! Availability:

Buck Knives

Our Rating:

Pros:

  • American made

  • Sharp

  • Great construction

  • Good quality for the money.

Cons:

  • Might be a little bulky

  • One blade style for both knives

  • Original handles are slippery to hold when wet

Score: 8.00 Great 

80.jpg

Stoeger Condor Field Over/Under 12 Gauge Shotgun

By Rusty Odom

  This is my review on the Stoeger Condor Over/Under Field grade shotgun in 12 gauge. First of all I am not a connoisseur of shotguns, I have your typical Remington 870, 887 Nitro mag, old Ithaca model 37, Mossberg 500, a few Mossberg clones like the Maverick and one made by them for Western Auto. These are all pump guns and of course I have a handful of NEF and H&R single shots break actions in various gauges. Even with all of these shotguns I might run 5 boxes of shells a year during hunting season and to let the kids bust bottles or whatever. I have in the past, way long ago, taken a tactical shotgun class, but I am sure those skills have diminished since. I really haven't practiced them in over 20 years. Most of my time on the Ole scatter gun is during early squirrel season, Turkey season and maybe a deer or hog hunt. 

  I am not a clay shooter nor a 3 gunner, so when I decided to buy a new shotgun, I wanted something that was versatile, dependable, won't break the bank and had a somewhat good lineage behind it. I like to buy guns that are dependable and not break the bank, ease of use and still have a little classic style about them. So while I was surfing the internet I ran across this one at Bass Pro Shops. The price of the shotgun at $399 is what really caught my eye as well as the American walnut stock. So with everything that I buy, I dive deep into doing my research and find reviews and or a better price. What I found out was what really surprised me the most is that Stoger is a subsidiary of Benelli and they are owned by Beretta. Stoeger also serves as an FFL for importing Uberti firearms which are a part of the Benelli/Beretta group. So at the price and the lineage that its Italian grandfather shotguns have, I figured this Brazilian shotgun had to be alright. 

  Upon purchasing the Shotgun I was not disappointed at all. It came in the normal cardboard box and upon opening it there was a plastic case that had the shotgun in it, broken down into two pieces. It is not a case that is lockable but it does a good job of storing the shotgun. What is included in the box is the gun itself, instruction manual and trigger lock. The bright walnut shine on the stock and forearm were remarkable, the recoil pad is average, the receiver is a great high blue polish. Everything had nice machined surfaces and the 28” vent rib barrel gave it a nice look with a pretty brass bead on top. The chokes that came with an installed IC and M, choke wrench tool included. The trigger on the Condor is a single trigger that switches between the top to bottom barrel after firing. It has auto extractors that do a nice job of displacing the shells when you break the action open. One thing I did notice is that the shotgun is heavy, but compared to other shotguns in the over/under class, it is close to the same weight. It weighs right around the 7 ½ pound mark on my scales. With a good sling for carrying it in the field you wouldn't be able to tell the difference in your favorite deer rifle on your back I wish I could talk to you about comb height or stock drop, but I don't have that lingo or expertise with shotguns. So what I can say, it feels good.

  When I started shooting this shotgun it was about the time that the “C one niner” ammo shortage started. I was lucky to buy 9 or 10 cases of various shotgun shells for the reason of stocking up, and who knows when other ammunition is going to be available. I started out shooting with Federal 2 3/4 “ #7 shot. I was just busting clays that were being thrown by hand. The shotgun swung well, the triggers took a bit to get used to. I think it was because I am not used to shooting an over/under. For some reason I wanted to try and pump it. This is just getting used to the manual of arms. I ran through a 100 rounds or so before I felt like I had the manual of arms down. For giggles I swapped over to S&B buckshot, this was fun, I was shooting from the low ready position and firing at targets 7 to 15 yards away. With the length of the barrel I wouldn't say it is the best home defense shotgun, but it will do in a pinch. I even took a few boxes of Federal 2 ¾ “ slugs to the range. I was hitting gallon size jugs at 50 yards with them. The gun, with its heft, will manage all types of ammunition with the proper choke tubes. Patterning of the shotgun showed that the barrels were pretty much the same. While shooting slugs they were close to a minute of deer at 50 yards. I was free hand shooting it with slugs, so I really didn't put the calipers on the target. I figured if I could see a hole I was ok. I recently took this shotgun hunting on a bear and boar hunt. While I didn’t kill anything with it, the shotgun was easy to manage. I found it very convenient, while getting in and out of the truck all day chasing dogs, to unload and load. 

  I would recommend  this shotgun to anyone that is looking for a budget priced shotgun, it can do most anything out there. You can take it to the range and shoot clays or trap, go on a squirrel hunt, or hunt birds of all types. If you are like me, and believe that a firearm is just another tool in your toolbox, you can use this shotgun to hunt deer, bear or hog. It might not be ideal for all of them, but it will work. Being that in the name it says “field”, I will take it to the field any chance I can get. If you are looking for something different , they also have it in a tactical model with a synthetic stock, and the ability to attach a red dot sight. They offer numerous models starting at $449 and up. So if you're looking for that nice looking do all shotgun, that sets it apart from the typical,  this is your gun. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Low priced Over/Under Field shotgun

Target Market:

The average shotgun owner needing an all purpose shotgun

FNBs (Features & Benefits of this product):

  • 12 gauge

  • 2-3/4 “ and 3” shells

  • 28” barrels

  • Overall length - 44”

  • Weight - 7.4 lbs

  • Comes with IC and M chokes

  • Vent Rib

  • Great fit and finish

  • Price $399

  • Sturdy built

  • Reliable

  • Classic Satin Walnut Stock

  • Classic brass bead sight

  • Nice blue color

What other aesthetic options or finishes are available?

12 gauge w/26” barrels,

20, 28, and .410 gauge

Link to other reviews:

Southern Extreme T.V.

Shooting & Safety

Price point:

MSRP = $449.00

Retail = $399

I need it now! Availability:

Bass Pro or Sportsman’s if anyone has any

Our Rating:

Pros:

  • Reliability

  • Classic lines

  • Feels good while shooting

  • Swings well

Cons:

  • It is out of stock at this time 

  • It is a little heavy

Score: 8.00 Amazing

80.jpg

Canik TP 9 Elite SC

 By: Rusty Odom  

 This review is on the Canik TP-9 Elite Sub Compact 9mm in Tungsten grey. I purchased this pistol after hearing that it was optic ready, I had been looking for a small sub compact pistol that was optic ready and without having to have a slide cut or purchasing another slide, this pistol fit the bill. To start off with I was looking at several other sub compacts and had purchased a Glock 43x. With my aging eyes I have recently got into the optic red dot game on pistols. Before buying this one I looked for slides or having the slide cut on the 43X, it was going to cost me about the same price to purchase a new firearm and a red dot to boot. So I bought it, and who doesn't need a new firearm. 

  So I found this pistol on Palmetto State Armory’s website for $399.99. This pistol is around the same Size as the Glock 26 and the Springfield XD-S Mod 2, coming from the factory with a 12 round magazine and a 15 round extended magazine. It also comes with extra magazine floor plates, flat and pinky curved. The box that it comes in is a very nice injection molded box, with tools and screws for mounting the optic. The box also contained a holster that can be configured for OWB or IWB carry, the holster is not that bad, it is not on par with a lot of other high end holster makers but it will do for range use. The barrel has a Nitride finish and the slide is Cerakote over the Nitride. It makes for a very pleasing look, compared to some of the plain jane black brick looking pistols on the market. It really does set this pistol apart from the others. The box also has a second backstrap to change for your comfort. I am still running the one that came installed on it because it fit my hand naturally. The slide has front and rear serration, a loaded chamber indicator, ambidextrous slide release and a reversible mag release. 

  Specifications of this pistol: 9mm, 4.19” barrel, overall length 7.28”, height 5.27” and weight is 1.77 pounds. The pistol does feel a little heavier than a Glock 26, because it is. It is 7 ounces heavier, an overall longer length around ¾ of an inch. It is close to an inch taller and a ¼ inch wider. 

  Despite its size the gun is very concealable. I am carrying it in a Crossbreed hybrid AIWB holster with its optic cut. I have been carrying this almost everyday for over 2 months, it rides very well and with the proper gun belt you wont get any sag, or grip stick out, like you do with some larger pistols. The draw of the Canik is so natural, it almost reminds me of a 1911 style when you point. It just falls in place and the sights jump right out at you. All of the controls can be assessed with one hand manipulation. Also I am running the Swampfox Sentinel red dot that is a RMSc shield footprint. I have noticed that it is easier to get the dot on target with the sub compact size than it is with a Full size Glock with an optic. Like I said before it is a natural pointer. 

  Now if there is one part of this pistol that has to be praised and talked about, it has to be the trigger. It is a short reset single action that is crisp with little to no creep. I have numerous wonder 9mms and they all have the same problem, the triggers are terrible. The trigger ranks right up there with my Grey Ghost match flat faced trigger that I have in one of my Glocks, and the best part is I didn't have to buy it and add it in. The trigger breaks at about 4.5 pound, and the reset is great. You can hear and feel it when it does reset. It makes for very fast follow up shots. The one thing I always look for when buying a firearm is how the trigger feels and the sights. That brings us to the next part. The sights are factory Warren tactical with a red rear and green front fiber optic front. These sights are nice and crisp, they just stand out when you present the pistol into the shooting stance. When co witnessed with a red dot, it just makes this little sub compact that much more admirable.

  I ran this pistol with Tula 115 grain FMJ ammo, before everyone gets in a tizzy, it is from Turkey which I believe is an old combloc country so it should be at home eating this. I would have preferred to run brass ammunition through it, but with the ammo shortage I was just glad to be able to pull the trigger and it go bang and I did not have to make the pew pew noise myself and have a child hit the steel target with a hammer for impact. I put a full 500 rounds in the pipe, at a range of 7, 10 and 25 yards. Running the dot on the pistol made for fast target acquisitions when drawing from the holster. The recoil is no different than that of a Glock 19, I was able to get a decent grip with the 12 round mags with the flat pads. When running the 15 round magazines it was even more pleasant to shoot. The set up reminded me of the FN 509 tactical that has the red dot and extended magazine. I had no malfunction, it ate the steel cased ammo and I didn’t even notice any shavings or wear in the extractor area. 

  The Cank TP-9 Elite sub compact is a game changer. I am not what you call a Glock fanboy but I am more invested in that platform then any other, so I would have to say that out of the box this firearm has everything you could want or need even more so than the Glock. There is no need to replace the trigger, change out the sights, stipple the grips or have the slide machined. It really does have everything you could ask for in a modern day carry pistol. I love the pointability of it, the sights are excellent, the optic cut great, and the fact that it rides well in a holster rounds out this little package. It comes with a plethora of items in the box for mounting an optic, changing the back strap, a holster, cleaning kit etc. So this would make a great starter pistol for someone looking to get into concealed carry, a range or home defense firearm. I forgot to mention that it does have an accessory rail to mount your favorite light, laser or bayonet to. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Sub-compact 9mm pistol

Target Market:

  • New handgun owners

  • Anyone wanting an optic cut pistol

  • Concealed carry

FNBs (Features & Benefits of this product):

  • Optic cut

  • Great trigger

  • Small package

  • Snag Free

  • Interchangeable back strap in 2 sizes (small and large)

  • Blackout rear and phosphorous front white dot sight

  • Reversible magazine release

  • Accessory under-barrel rail

  • Tungsten Cerakote over nitride slide finish

  • Match grade nitride coated barrel

  • Small parts and internal components nitride or high-wear nickel-coated

  • Comes with two magazines: one 12rd + optional finger rest base plate and one 15rd with extended baseplate

What other aesthetic options or finishes are available?

With Shield sms2

What others are saying?:

Nothing found

Link to other reviews:

https://www.americanrifleman.org/articles/2020/2/13/review-canik-tp9-elite-sc/

https://aliengearholsters.com/blog/canik-tp9-elite-sc-review/

Price point:

MSRP = $429.99

I need it now! Availability:

Our Rating:

Pros:

  • Factory optic cut

  • Fiber optic sights

  • Great trigger

  • Complete starter carry package

Cons:

  • Heavier than comparable pistols 

  • Magazines are hard to find

  • Magazines are pricey

Score: 9.00 Amazing

90.jpg

Swampfox Wolverine slide and Justice red dot combo

Written by: Rusty Odom

This review is on the new Swampfox optic Justice 27mm red dot pistol sight and the Steel City Wolverine combo. Let me start by saying I am an average Joe shooter with a huge interest in firearms. I am always looking for the latest greatest item or something to improve on an older firearm to make me a better shooter. For this review I chose a Glock Gen 3 model 22 in .40 S&W to convert to 9mm. The firearm was purchased some years ago for around $295 and it was a local police trade in. I tossed it in the gun safe, knowing one day I’d do something like this to it. 

The Swampfox Justice red dot and Steel City Wolverine slide combo. The slide is in a distressed green pattern and is available for the Glock 19 and 17 Gen 1-3 only. The slide comes with the channel liner already installed and with suppressor height fiber optic sights. They are in the combat configuration (rear sight in front of the optic), the slide is smooth with no machine marks on the outside, except in the area of the optic cutout. The threads on the mounting service were nicely tapped and debured. When mounting the optic it is a nice snug fit. It also comes with 3 sets of screws and Allen keys to mount the optic. The slide has great machining in the front for a good grasp to reload with wet or sweaty hands. It’s texture is just the right combination of aggressiveness, not to be uncomfortable when sharply grasping the gun. It has a lightning cut above the barrel, I assume to reduce weight. I have a concern of dirt or debris getting into it and causing issues in a real world situation. 

The optic is clear and crisp, it has an 27mm window and is made out of 7075 aluminum. There is a Liberty version that has a smaller window of 22mm. These are duty rated and have a new and improved hood over their last model. It has a top load battery that takes the CR1632 battery. Not Chad’s favorite. It weighs 1oz without the battery, its height is 1.04”, length 1.78” and width 1.24”. It has the normal parallax free, fog proof and ruby coated lens. 

It claims to have a greater battery life and new and improved shake a wake motion sensing illumination. The slide and optic are both for the RMR mounting option. Assembly of the slide is straightforward, just like your normal Glock slide would go together. A Brownells Glock completion kit was used for final assembly. 

The initial sight in was done by co-witnessing the dot and the front sight post. Once the impacts were on target I did a ⅓ co-witness, raising the dot above the front sight post to declutter the sight picture. The slide had a few failures to feed, but after some lubrication and some dry fire, it ran flawlessly. The optic is easy to pick up, with some practice, for someone that is new to the red dot game. So far I have fired 350 rounds of 115 grain 9mm with no problems after the initial FTE. I was able to keep all the rounds in the 10 ring at 10 yards. Even with astigmatism the dot was clear with some adjustment of the intensity level. 

In my honest opinion I do believe that this will make a great setup for someone that wants to put an optic on their Glock and doesn’t want to have their slide cut, or wants the benefits of having one frame with two different calibers. After my initial testing and what I know of some of the other optic I own from Swampfox, this appears to be a quality red dot. The slide is nice and clean, the battle worn or distressed coloring gives it some character. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

A quality optic red dot with a standard RMR footprint, with a cost half the price of others. An improved hood to protect the glass, as well as shake awake technology. It claims to be rated for law enforcement and duty use. 

The slide is well textured, nice smooth and rounded corners. Assembly was simple, machining was good. 

Target Market:

People who want to get into the red dot game and not have to have their original slide machines. Also those who have a .40 or .357 Sig that want to convert it to 9mm for cost reasons. 

FNBs (Features & Benefits of this product):

  • Ease of assembly 

  • Clear optic

  • Battery life one year. 

  • Great light intensity of dot 

  • One year warranty 

  • 1500G’s rated

What other aesthetic options or finishes are available?

There is a smaller Liberty optic available. 

The slide as of now comes only in distressed green 

What others are saying?:

So far the only reviews are on the Seampfox instagram page. All the once noted were high reviews including my own.  

Link to other reviews:

None found

Price point:

MSRP -

Wolverine slide $349

Optic $249 to $259

Combo $599

I need it now! Availability:

Swampfox Optics

Our Rating:

Pros:

  • Optic has a good design

  • Improved hood

  • Ruby clear glass

  • Good light intensity 

  • Ease of adjustments of dot

  • Shake a wake feature

  • Slide has great texture 

  • Channel liner already installed 

  • Good machining with limited tool marks

  • Nice tall  fiber optic sights preinstalled 

  • Great customer service 

Cons:

  • Does not have the time on market as other manufacturers so durability is a concern 

  • Lightening cut in the top of slide

Score: 8.50 Great

85.jpg


MAG 40 AAR

Written by: Rob S.

I have taken several training classes, during which, MAG 40 was a topic of discussion.  The Massad Ayoob Group (https://massadayoobgroup.com/) hosts the MAG 40 class, and although I have heard of Mas, I had not entertained taking his class.  Based on Feedback from other students, I decided to take the October class.  

When you register, in addition to the application, you are required to submit proof of a clean criminal history.  This can be done by attaching a copy of your Concealed Carry permit, Law enforcement credential, or FBI records check.  This was a first for me as other instructors only asked for my demographic information and payment. This additional step is designed to ensure students are trustworthy and reliable members of society.  I was then sent an email with a map of the area, recommended hotels, and items to bring to the class.

The course is divided between 20 hours classroom and 20 hours range.  It was held over 4 days from Wednesday through Saturday. The posted 10 hour days seemed long but we were told that this allows for students to attend the class and minimize the time you have to take off work to travel to and from the class.  


NOTE - If you take the MAG 20 Class or MAG 20 Range you are getting the same information; MAG 40 is both MAG 20 classes at one time.

We started with the Class at 8:00 on Wednesday with registration, introductions and right into the lecture.  The class lecture is a series of recorded videos by Mass, primarily from 2013. This is important as the lectures videos, tests and notes are discoverable evidence and can be presented in court.  This is helpful in educating the jury on self defense laws. Mas made a point that while a witness can be cross examined, it is hard to do so with a video. He introduces each video and answers questions afterwards.  Be prepared as most days were longer than 10 hours. During this class I took so many notes I had to purchase a second notebook and then filled that one!


The video lectures will cover:

  • Ability, Opportunity & Jeopardy

  • Color codes of awareness and the OODA Loop

  • Standards of Proof

  • Tueller Drill

  • Affirmative Defense

  • Court cases

  • How to document training so it can be used in court.

  • Selection of counsel


There is a ‘proprietary’ lecture section which Mass requested we keep it confidential.  I will honour that request but can say that the information provided was that which I have not heard from other instructors.

Once we have the range safety briefing in the classroom we head out to the range.  Mas covers the shooting activities in the class prior to heading to the range. The day is divided 5 hours lecture and 5 hours range to balance the week out.  The schedule was modified due to anticipated rain on Saturday. At the range I noticed they had a minimum of 1 (Volunteer) RSO for every two shooters on the line.

Students were divided up into two groups so only half the students are on the line at a time.  The group not shooting is expected to watch the shooting group, load magazines or hydrate (you will be constantly reminded to drink water).  

While some instructors have their favorite shooting method (weaver, Isosceles, Chapman etc.) Mass makes it clear he does not care which one you use, try them all and use the one which works best for you. You will shoot from all three positions from  standing, crouching and kneeling during class and on the shooting test.  

   They place a STRONG emphasis on safety, maintaining a full time paramedic with trauma kit and AED on the range..  The rules are simple:

Your first range safety violation results in removal from the range for the rest of the day.  

Your second violation results in expulsion.

Conclusion 

While some instructors have flashy internet profiles and can be borderline annoying, not so with Mass, who doesn’t have a Facebook page.  Mass brings a lifetime of knowledge and experience to the class which he presents in a logical, straightforward [no BS] manner.  

This class was more than worth the price of admission and I highly recommend anyone who carries a weapon.


Items I should have brought:

  • Extra Notepad(s)

  • Pens

  • Folding Chair (there is no seating at the range)

  • WATER

  • Rolling Rock, Extra pale longneck bottles! (for Mass) 


Overall Costs of course

$   700 Course Cost *

$   400 hotel

$   100 meals

$   120 gas and misc travel expenses  

$1,320 TOTAL


Score: 9.50 Amazing

95.jpg

* Herman gave a $100 discount for early registration..




Fowler Industries Gen 5 Glock Trigger

Written by Zane M.

If you listen to the podcast then you probably are aware that I’m a fan of flat faced triggers in my glocks. You also are probably aware that I think the stock gen5 triggers are much better than previous generations of Glock triggers. So much so that I had no intention of replacing my oem trigger in my gen5 Glock 19.

FI-2.jpg

Then Fowler industries sent me their zero trigger. With low expectations and little enthusiasm I installed the trigger in my g19, as I’m the only reviewer with a gen5 glock apparently. I was pleasantly surprised.

Installation was simple, like all Glock drop in triggers, and took just a few seconds to get it in there. The first thing I did was check that the trigger didn’t compromise safety. After checking the ledge and cruciform engagement (technical terms?) everything appeared to be good so I dropped it and hammered it a few times to see if I could get the trigger to trip. I could not. So it passed test one.

FI-4.jpg

Next up is feel, the trigger feels great and as a fan of flat faces triggers I really like this one. The sides are cut at angels so the trigger feels rounded and is comfortable for a variety of finger placements. Despite popular belief there isn’t a single spot everyone should place their finger on the trigger. While all flat faced triggers work fine when using the pad of your finger, they can be less comfortable with less or more finger on the trigger. Depending on your hand size and reach this could be important.  While it’s hard to convey over text it really feels good.

FI-3.jpg

On to the trigger pull. The trigger is just slightly more smooth than the oem trigger. This is to be expected since they use an oem trigger bar that’s been polished. They recommend using an oem -connector and stock all other parts and springs. I ran the trigger with a few different connectors and I always (like all my other triggers) come back to the stock 5.5lbs connector. You could get the same smoothness but putting several thousands rounds through the gun but you’d still have a plastic curved shoe.

If you want a 1911 like trigger, this isn’t the trigger for you but none of the drop safe options I’ve tried are either. If your looking for an better feel on the trigger, this might be it.

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

Flat faced aluminum gen 5 trigger

TARGET MARKET:

Anyone looking for a better trigger show for glock

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):

  • Provides a better contact surface for the trigger finger

  • Smooths out the trigger travel.

  • Removes unnecessary take up or pre travel without compromising safety.

  • Looks cool(if that matters to you)

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

  • “Spider-Man edition”

  • Red

  • Blue

  • Green

Website isn’t super easy to navigate, most of these are options I found on other companies’ sites

What others are saying:

They seem to like it but I only found video reviews

Price point:

MSRP - $145.00

I need it now availability:

Shootingsurplus

Fowler Industries

Our Rating:

    Pros:

  • Improved feel

  • Pre-travel removed

  • Smooth

    Cons:

  • Price

Score 8.5 Great

85.jpg

Write here…

01FIFLR.jpg