vosteed

, ,

Vosteed Parallel

, ,

Vosteed Parallel Review

  Vosteed has a brand new knife out and it’s called the Parallel. It’s designed to be a very thin and lightweight pocket knife. And let me tell you, they succeeded! So if you are looking for a tough, lightweight and thin knife. The Vosteed Parallel could be the knife for you.

The Handle 

  The Parallel features a non textured titanium handle complete with a lanyard loop. For this knife you can get in 3 different styles. I received the gray handled knife and I was completely blown away by how thin the knife is! Coming in at a thin measurement of 0.28”, I couldn’t even tell it was in my pocket sometimes. There were even a couple of moments when I actually thought I lost it, because I couldn’t feel it in my pocket. And that’s also due to the knife being so lightweight coming in at 2.29oz. When I first opened it, I was a little worried about it not having a textured grip handle. It wasn’t a problem for me at all. I can get a great grip on the knife without it trying to slide around in my hand. Having no gripping also helps make it slide in and out of your pocket very smoothly. But thanks to the very strong pocket clip, that can be swapped to either side of the knife, it stays clipped in your pocket really well. It is probably one of the strongest clips I’ve had on a knife. 

The Blade

  Now here is where it gets really awesome! The Vosteed Parallel has one of my personal favorite blade styles on it, a 2.90” reverse tanto blade. For me personally, I love that style of blade and I feel that it is one of the best for piercing and cutting. On the back side of the blade it has some really great rough jimping. This helps keep control when I’m cutting something up like boxes or plastic straps. I have had knives before with smoother jimping and it definitely takes away some of that control you get. The blade steel is 154CM and because Vosteed designed the knife to be thin, the blade is only 0.08” thick! I was worried about the blade breaking due to it being so thin, but it has proven to be way tougher than I thought. Plus it has stayed sharp for a while now. When the time comes to sharpen it, 154CM sharpens very easily. This blade steel is also highly corrosion resistant so you don’t have to worry about it getting ruined by harsh chemicals.

Opening 

  The Parallel comes equipped with only two styles for opening, that is a thumb stud and pulling back the crossbar lock and flipping it open. I personally like having more ways to open a knife like front and back flippers. Or being able to flip it open using a button lock. And this is one of my complaints with this knife. As you open the blade, the spring loaded lock parts move so that the crossbar lock can engage when the blade is fully open. This causes the blade to not want to smoothly open when you take your thumb off the stud while opening. It can kind of push the blade back towards your fingers. So you have to sort of guide the blade open with your thumb on the thumb stud. Or give it a flick when you start to open it. 

The Lock

  Something that is handy about this knife is you can adjust the stiffness of the crossbar lock and that also makes the blade opening a little bit easier. However, It does not fully fix that stiffness. It definitely helps though. You can do this by essentially taking apart the knife, which is not complicated, and moving both springs (one on each side) to 1 of 3 different pin holes. This can definitely help with making it lighter or stiffer to open. It just depends on how you like your knife to open. When I first opened the knife, the lock was very stiff to pull back when the blade was open. So I did that spring adjustment and that made it a lot easier to open and unlock. This is my first pocket knife with a crossbar lock on it, and I have really come to like it. The lock tabs have great gripping on them, so you can pull them back easily to fold the knife closed. 

Summary

  I have come across so many different pocket knives over time, but I have never come across one so thin and lightweight! I sometimes forget I have it because of how well it fits in my pocket. It has been through quite a bit of cutting and slicing. I work in an industrial environment, and this knife has been doing a fantastic job cutting just about anything I need it to. I do wish that it had more ways to open and not such a stiff lock. But that being said, it is still a great knife! This is my second knife from Vosteed, and both the knives have such great quality and designs. If you are looking for a knife that fits perfectly in your pocket and doesn’t have much weight to it, I highly recommend the Vosteed Parallel. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Super thin and lightweight folder

Target Market:

Those wanting a super thin pocket knife

Features, Benefits, and Specifications of this product:

  • Blade Length: 2.90" | 73.85 mm

  • Overall Length: 7.04" | 178.90 mm

  • Blade Width: 0.96" | 24.50 mm

  • Blade Thickness: 0.079" | 2.00 mm

  • Blade Material: 154CM

  • Blade Grind: Flat

  • Blade Style: Reverse Tanto

  • Blade Finish: Satin

  • Hardness: HRC 60±2

  • Handle Length: 4.13" | 105.00 mm

  • Handle Width: 0.92" | 23.40 mm

  • Handle Thickness: 0.279" | 7.10 mm

  • Handle Material: Titanium

  • Color: Gray

  • Weight: 2.29 oz | 65.00 g

  • Opener: Thumb Stud

  • Lock Type: Crossbar Lock

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Reversible | Stainless Steel

  • Carry Position: Tip-up

  • Knife Type: Manual Folding

  • Backspacer Material: Aluminum

  • Backspacer Color: Green

  • Thumbstud Material: Aluminum

  • Thumbstud Color: Green

What other aesthetic options or finishes are available?

There are 3 different styles that you can go with:

Black titanium handle with a black SW blade.

Grey titanium handle with satin finish blade.

Black titanium handle with Satin finish blade.

What others are saying?:

Both from Vosteed’s website

“Only one major flaw, otherwise a very nice knife

Deployment is unpredictable for a crossbar lock. There is a place between the closed and open positions where the blade swings free. The lightweight blade often bounces back towards the handle as blade approaches the open/locked position. I can’t be sure blade is locked open without looking at it”


Great knife for the money

Super thin
Feels good in the hand no real hot spots
Super sharp out of the box
Great knife and super nice to carry with how thin it is, feels sturdy for its size. My only complaint is the springs are super stiff and you have to really send it to open and on my office hands it can be a bit uncomfortable to hold the cross bar back to have the blade drop closed. I opened it up, it has adjustable spring tension, three positions and it was in the weakest position. Definitely needs break in but will enjoy flicking it until it does

Link to other reviews 

Melissa Backwoods on YouTube

Price point:

MSRP = $129.00

Retail = Same

I need it now! Availability:

Vosteed or Blade HQ

Our Rating:

Pros:

  • Love how thin and lightweight the knife is! It fits in my pocket so great. 

  • It cuts so dang smoothly and has held a sharp edge for a while now.

Cons:

  • I do wish it had more ways to open it than just a thumb stud or using the crossbar lock to flip it open. 

  • I don’t really like how stiff the lock is and that I had to take it apart to adjust that stiffness.

  • Because of the stiff lock, it makes the blade opening not too smooth. You kind of have to guide it out with your thumb otherwise it pushes the blade back towards your fingers.

Score: 6.50 Okay

,

Vosteed Aluminum Raccoon

,

Vosteed Raccoon Aluminum review 

Years ago the only answers I wanted from knife reviews were “Is it sharp? Does it cut? Did it stay sharp? How much does it cost?”. The Vosteed Raccoon Aluminum folder is sharp, cuts well, stays sharp and is a great deal at $72 especially when you see how well it's built and works.

I was sent the Vosteed Aluminum Raccoon to review. This is the latest version of their Raccoon knife line. Chad did a review on the micarta version of the Raccoon last year. The difference between the two versions is the “Aluminum” has a Nitro-V blade steel and the CNC cut aluminum scales. 

The Vosteed Raccoon Aluminum uses a crossbar lock that you pull back to release the blade when it is closed. The blade can then be flipped open or dropped open. It also has a double thumb stud that is well designed. I like using the crossbar lock to release the blade. I don't know why, but I use that method most to deploy the blade.

The handles are CNC cut black aluminum arranged in a diamond pattern. The edges of the handles are rounded so they won't snag clothing or dig into your hand. The aluminum, diamond cut handles aren't aggressive like stippling on pistol grips, but my hands never slipped regardless of what I was cutting. The 3.25 inch drop point blade deploys smoothly due to the ceramic ball bearings.

   As you see from the included photos, I use my knives for food preparation. This knife chopped vegetables, deboned chicken thighs, sliced blocks of cheese, and easily cut large cardboard boxes into trash bag sized segments. Plus it still has a serviceable edge.

   One of the reasons I like being on the Firearms Insider Gun and Gear Review Podcast is because we actually use these products and tell the truth. This knife was used nearly every day for months. I would occasionally use a couple other knives that I am reviewing long term, but this was the main knife. It could use a good sharpening to bring back the razor sharp factory edge. However, I just peeled an apple with no issue. This Nitro-V blade steel holds an edge, I'm impressed.

   The knife shows some wear on the aluminum handles. Mainly because it has been smashed against my EDC light, the Streamlight Wedge. If you want a pristine knife, I am not the person to review it. You want a knife that is a good all around knife, that opens smoothly, and has a better than average blade steel for a good price, the Vosteed Raccoon Aluminum folder may be for you. 

Firearms Insider Reviews - Key Points

Claim to Fame:

An attractive, feature filled utility knife with good blade steel for a really good price.

Target Market:

Anyone wanting an attractive utility knife made with good steel that's very sharp under $75.

Features, Benefits, and Specifications of this product:

  • Blade Length: 3.25" | 82.55 mm

  • Overall Length: 7.60" | 193.12 mm

  • Blade Width: 1.07" | 27.27 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: Nitro-V

  • Blade Grind: Flat

  • Blade Style: Drop Point

  • Blade Finish: Black Coated

  • Hardness: HRC 60±2

  • Handle Length: 4.36" | 110.75 mm

  • Handle Width: 1.10" | 27.95 mm

  • Handle Thickness: 0.49" | 12.40 mm

  • Handle Material: Aluminum

  • Weight: 3.66 oz | 103.8 g

  • Opener: Thumb Stud

  • Lock Type: Crossbar Lock

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Reversible | Stainless Steel

  • Carry Position: Tip-up

  • Knife Type: Manual Folding

  • Backspacer Material: Aluminum

  • Backspacer Color: Black

What other aesthetic options or finishes are available?

Orange, Blue, Purple 

What others are saying?:

Nick the Knife

5.0 out of 5 stars

The Racoon continues to deliver

The Vosteed Raccoon is hands down one of my most carried knives and I have hundreds to choose from. The handle is simple, but genius. It offers a comfortable grip that will work well for almost any hand size. The drop point blade is robust enough to go to work with and has good slicing geometry. Nitro-V steel is tough, and while not having the highest edge retention, is easy to sharpen.

This version comes in with Aluminum handle scales. Generally Aluminum is not my favorite choice and I have no idea why it has become thought of as premium. People seem to have forgotten all the $10 Aluminum S&W knives of 20 years ago... Anyhow this Aluminum is nicely anodized and the green/brown color spoke to me. The finish is smooth, making this a Raccoon that will likely see lighter duty than my G-10 or Micarta variants.

The action is what I expect from Vosteed. They put out smooth operators, and this is no exception. The button lock lets the blade drop effortlessly into the closed position. Thumb studs are spot on for deployment. You can also engage the button and give a little wrist action to deploy. If you like to fidget, it does that. I prefer the crossbar lock version as it is inherently stronger than a button lock, but as I mentioned, I liked the looks of this model and it only had a button lock in this color. C'est la vie.

Overall, you really cannot go wrong with a Vosteed Raccoon for EDC. It is definitely one of my top 5 for 2023.

Link to other reviews:

Iridium 242 YouTube Review  

Price point:

MSRP = $72.00 

Retail = $72.00 at Blade HQ

I need it now! Availability:

Vosteed or Blade HQ

Our Rating:

Pros:

  • Very sharp

  • smooth opening

  • very good blade steel

  • affordable 

  • Blade Finish holds up well

Cons: 

  • The aluminum shows dings and scratches easily 

  • The jimping on the spine of the  is next to useless

Score: 7.50 Good

Vosteed ANKYLO

Written by: Casey Kienzle

  I received Vosteed’s new knife, the Ankylo, and it’s truly a fine knife! This knife features an all new lock system called the V-anchor lock. Which is an incredible new locking system. So let’s dive in and see what makes this knife so great.

The handle

  The Ankylo’s handle is made from 6061 Aerospace Grade Aluminum. I personally really like this handle because of the grenade pattern texture and because of the handle shape. It makes it really easy to get a good grasp on the knife and hold it comfortably. Plus, it makes me feel like I have really good control over the knife. There is amazing jimping on the back of the blade and runs along some of the spine of the handle, which definitely helps with that control as well. On the inside of the handle are machined weight relief pockets. These pockets are there to reduce user fatigue. This gives the knife a good balanced feel. For carrying the Ankylo around all day, Vosteed added a deep carry pocket clip.

The lock 

  The Ankylo features Vosteeds new V-anchor button lock. It is a pretty fascinating design. There is an anchor plate and a magnetic connector that will attract, and push, the button from different directions. The pivot button will become recessed even if the lock is not engaged, that way the button will not be accidentally pushed. What that does is give the lock an integrated fail safe system. The anchor plate for the lock is also spring loaded, which allows it to quickly move into place. The anchor plate is milled from a 5mm thick piece of steel, giving it lots of strength. I really like this lock, it feels incredibly secure when the blade is opened and the lock is engaged. 

Opening

  There are 4 different ways to open the Vosteed Ankylo. Thumbhole, front flipper, back flipper and an easy to use button. I personally really like that because sometimes your hand may be in a position where you need to open the blade differently and you can’t use the flipper on the back. So it’s really handy to have the 3 other ways to open it. When I first started using this knife, I noticed that it has a really smooth opening. And that is due to the larger sized bearing Vosteed uses in this knife. Other folding knives use a smaller sized bearing. Since the Ankylo uses that larger bearing, I notice that it has a much smoother opening. 

The blade

  One of my favorite parts of the Ankylo is the Elmax reverse tanto style blade. The blade material is Bohler Elmax, which is one of the toughest high end stainless steel you can get. It compares to S30V. Elmax also has better wear resistance than S30V, meaning that this blade is really durable and stays sharp for a long time! I can definitely see that with all the boxes, tape and other various things I have been cutting with the knife. They designed the blade belly to be really great for multitasking. Because of that, it can easily cut and pierce through lots of things. That’s what you want in a knife, right!!

Summary

  This is my very first Vosteed knife, and I absolutely love the Ankylo! It feels very solid, it’s incredibly sharp and I absolutely love the button lock. The design of the new Vanchor lock is really great and feels very secure when it’s engaged. This is truly one of the best knives I’ve ever used. If you are looking for a great everyday carry knife that is tough and stands out from other knives, then the Vosteed Ankylo is the knife for you!

Firearms Insider Reviews - Key Points

Claim to Fame:

Rugged EDC folder with a robust new locking system

Target Market:

Anyone wanting a high quality, sturdy, folding EDC knife

Features, Benefits, and Specifications of this product:

  •  Blade Length: 3.18" | 80.90 mm

  •  Overall Length: 7.75" | 196.90 mm

  •  Blade Width: 1.22" | 31.00 mm

  •  Blade Thickness: 0.134" | 3.40 mm

  •  Blade Material: Elmax

  •  Blade Grind: Flat

  •  Blade Style: Reverse Tanto

  •  Blade Finish: Black Stonewash / Satin / Stonewash

  •  Hardness: HRC 60±2

  •  Handle Length: 4.57" | 116.00 mm

  •  Handle Width: 1.06" | 27.00 mm

  •  Handle Thickness: 0.563" | 14.30 mm

  •  Handle Material: Aluminum

  •  Color: Black / Green / Gray / Orange / Blue

  •  Weight: 4.76 oz | 135.00 g

  •  Opener: Front Flipper | Back Flipper | Thumb Hole

  •  Lock Type: V-anchor Lock

  •  Pivot Assembly: Caged Ceramic Ball Bearing

  •  Pocket Clip:  Non-reversible | Stainless Steel

  •  Carry Position: Tip-up

  •  Knife Type: Manual Folding

What other aesthetic options or finishes are available?

There are two options for the handle: Machine textured aluminum that comes in grey, black, orange and green. Or smooth, hard-coated matte finish that comes in blue or black.

What others are saying?:

Product has just been released, so nothing found as of publishing

Link to other reviews:

Gear Junkie

Price point:

MSRP = $169.00

Retail = $159.00 on early Kickstarter

I need it now! Availability:

Kickstarter or Vosteed

Our Rating:

Pros:

  • Great Size

  • New V-anchor lock system

  • Handle Texture

  • Blade jimping

  • Elmax blade steel

Cons:

  • Slightly stiff operation out of box - needs break-in period to operate easier

Score: 9.00 Amazing

Vosteed Thunderbird

  When it comes to everyday carry pocket knives, there are a ton on the market. All of them have various features for you to choose from. Vosteed makes a good selection of knives to fit whatever you are looking for. The Vosteed Thunderbird is one of those edc knives that has plenty of features. The Thunderbird’s features will rival knives that are priced much higher.

  Vosteed’s Thunderbird is a unique knife. Not in the way it looks, or the materials used, but in the way it opens. The Thunderbird uses Vosteed’s “Trek Lock” opening system. Trek Lock is a multi-opening system that allows one to open the knife in 4 or 5 different ways. One is by using the thumb hole. Another is using the normal flipper, located on the spine of the knife handle. And yet another way to open it, is to use the front flipper, located on the lower front of the closed Thunderbird. Then, since the knife uses a button lock mechanism, one can push the button and flip the blade out. Lastly, which isn’t really a flip method, is to just fold the knife out like you would an old school lock blade. To close the blade, just push the button and close it however you see fit. I would like the button lock to be a little harder to push. I just feel that little bit of extra might help keep the blade from wandering out when in the pocket. Not that it did this, but I can get the blade to open by just flicking the knife downward, something I can’t always do with button lock knives. If you like to fidget with your knife, the Thunderbird can’t be beat for that. I even find myself opening and closing it for no reason. As you may, or may not know, I am a big proponent of multiple ways to open a knife. Mainly because if you need to open a knife in some odd place, or body position, your main way of opening it might not work. So the Thunderbird is a dream come true for me. 

  Blade steel is an important quality of any knife. The steel Vosteed chose for the Thunderbird is top tier. This particular Thunderbird uses M390 steel. M390 is pretty much labeled a “super steel”, at least for knife making. It is super tough and durable with high edge retention, which leads to a high wear resistance. What that means for you is that the Thunderbird’s M390 blade will stay sharp for a very long time. M390 also has high corrosion resistance. So when you are actually using it, if it gets blood, or other bad stuff on it, it won’t damage the blade as quickly. One downfall to all of this, is that it takes a lot more effort to sharpen the Thunderbird. I’m okay with this trade off since the knife stays sharper longer. Vosteed also offers some versions of the Thunderbird with Elmax or S35VN blades. I don’t think you can go wrong with any of the blade steel offerings of the Thunderbird.

  The handle of a knife is also important. Vosteed chose a Laminate GT-Mascus, or in simple terms, a G10 handle with a topographical pattern. This topo pattern is a black background with blue topo lines. Besides looking great, the Thunderbird’s handle shape is useful. The handle's spine has a slight curve to it. This makes it fit the hand fairly nice, even though it is a fairly sleek knife. It also has a decent choil built into the handle. That way you can really dig into the handle for a tight grip. The back flipper tab also meets up with this choil, extending it out a tiny bit farther. One notable thing is that the flippers jimping is slightly noticeable in the front of the choil. This gives the knife a little better grip on that index finger. The handle doesn’t have any real texture to it, but being G10, it still gives a great grip. Vosteed also designed the Thunderbird with a deep pocket clip. The clip’s mounting is inlaid so it doesn’t bind up when putting the Thunderbird in your pocket. It is reversible, but both options are tip up carry. Lastly it has a brass spacer at the rear. The spacer also includes a place to install a lanyard. The brass nicely sets off the color scheme and helps balance the Thunderbird out nicely.

  The last important design of the Thunderbird is the blade profile. Vosteed gave the Thunderbird a curved tanto style blade. It also has a harpoon style top structure. These two designs give the Thunderbird a really good “piercing” ability. More important to me, is that the tanto’s tip melds nicely with the belly of the knife. This makes it more useful than a regular tanto style blade. On the spine of the blade there is some jimping. The jimping is the Thunderbirds one downfall. It is fine and not deep enough to really aid in use. The Thunderbird also uses a shallow hollow grind, which gives it some good slicing ability. I typically don’t like tanto style blades, but the Thunderbird made me believe that there are good style tanto blades out there.

  Even though I haven’t had the Thunderbird for very long, I have used it. It is really good at just about everything. From slicing gummy bears, which is the real test of a knife's sharpness, to scraping off stuff from hard surfaces, the Thunderbird just performs. As Vosteed states, this is the fidget king when it comes to knives. The knife is SHARP. It also stays sharp thanks to the M390 blade steel. I’ve cut a lot of cardboard too, and the Thunderbird keeps slicing through it like soft butter.

  If you are looking for that do all edc knife, the Vosteed Thunderbird might be it. It has an excellent blade material and shape. There are multiple ways to open it, thanks to its Trek Lock. It feels good in the hand and has a silky smooth action thanks to its ceramic ball bearings. At $135, it is priced far below what you would expect to pay for something of this quality. So go check out the Vosteed Thunderbird, they probably make a version that you’ll like..

Firearms Insider Reviews - Key Points

Claim to Fame:

EDC knife with quality blade steel and multiple ways to open

Target Market:

Anyone wanting this style of quality in a folding knife

Features & Benefits of this product:

  • Trek lock opening - Front Flipper | Back Flipper | Thumb Hole | Fuller

  • Blade Length: 3.25" | 82.55 mm

  • Overall Length: 7.73" | 196.34 mm

  • Blade Width: 1.10" | 27.9 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: M390

  • Blade Grind: Compound

  • Blade Style: Tanto | Harpoon

  • Blade Finish: Black Stonewash

  • Hardness: HRC 60±2

  • Handle Length: 4.48" | 113.79 mm

  • Handle Width: 1.17" | 29.72 mm

  • Handle Thickness: 0.472" | 12 mm

  • Handle Material: GT-Mascus (G10 topo pattern)

  • Weight: 3.34 oz | 94.70 g

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Tip-Up Reversible | Stainless Steel

  • Knife Type: Manual Folding

  • Backspacer Material: Brass

  • Button Material: Stainless Steel

What other aesthetic options or finishes are available?

https://www.vosteed.com/collections/thunderbird

What others are saying?:

4 out 5 stars at Vosteed.com

3.25" m390 thunderbird

Very pleased with this knife. I also have a Vosteed Gator that I love. I like this smaller version of the thunderbird and find it the perfect size for daily carry. Every deployment option works exactly as it should. The knife came sharp (although I sharpened it to my liking) and perfectly centered. No issue with the button lock unscrewing or with the "spine whack" test that have been a topic for the previous thunderbird model. I wish the detent was a little stronger; however, it is a great knife that will perform well for daily tasks. Highly recommend it.

Link to other reviews:

Nothing But Knives

Price point:

MSRP = $135.00

Retail = Same

I need it now! Availability:

Vosteed

Our Rating:

Pros:

  • Multiple ways of opening

  • M390 blade steel

  • Button Lock

  • Ceramic bearings

  • G10 handle

  • Looks

Cons:

  • Button lock could have a little more strength

  • Shallow Jimping

Score: 8.50 Great

Favorite Link:  Viridian RFX 45 review

Vosteed Raccoon

  Vosteed has come on the market with a bunch of quality knives at affordable prices. The Raccoon is one of those. These knives give you good, useful features that won’t break the bank. If you are looking for an everyday carry knife, one that can handle a multitude of tasks, the Vosteed Raccoon might fit the bill. Let’s find out what this knife has to offer.

  The Vosteed Raccoon starts off with a crossbar style lock. The crossbar lock essentially locks the blade in place once open. I found it to hold the blade in place for everything I used the knife for, from normal cutting to scraping off tape. The crossbar lock on the Raccoon is spring loaded and located toward the top of the handle, near the pivot. Once the blade is locked in place and you wish to close it, just slide the crossbar back toward the rear of the knife to release the blade. You can use either side of the crossbar, or both, it’s really just personal preference. Amazingly, this is my first crossbar lock and I really like how it works.

  More important than the lock style, is the Raccoon’s blade style or shape. The Raccoon uses a flat ground 3.25” drop point blade made from 14C28N steel. Vosteed used a 3 to 1, length to width, ratio on the blade. I really liked what they did with the blade shape, it just works. If you are worried about the blade steel, it has held up extremely well. The blade came razor sharp. So sharp that I cut myself within the first few minutes of receiving it. I have had to sharpen the blade since then, but that is mainly because I was scraping off tile grout with it. I have two complaints about the blade. One is the choil. Yes, it allows one to choke up on the knife, but sometimes it can get caught on the edge of something, like a box flap. The next has to do with the jimping on the spine of the blade. It is too close together and not deep enough. It really doesn’t help much. Besides those two items, I really do like the Raccoon’s blade shape and style.

  I probably should mention how the Raccoon opens. Vosteed gave the Raccoon your everyday thumb stud opener. It has a thumb stud on both sides of the blade, so no matter what hand you use to open it, it will work. This thumb stud is in a good location and makes for opening the Raccoon very easy. One can also use the crossbar lock to open the knife. Just pull the crossbar back and the blade will fall open due to gravity. Or you can flick it out after sliding the crossbar back. Part of the reason the Raccoon opens so easily is its caged ceramic ball bearings. I always like a knife that has more than one way of opening it and one that opens smoothly. The Raccoon does both of those with ease.

  Moving back from the blade, we get into the handle. The handle on the Raccoon is made from micarta. The micarta gives the handle a nice feel. Being micarta, it naturally has a little bit of texture to it. Because of this, the micarta handle never felt slick to me and always gave a decent grip. The Raccoon also has a deep pocket carry clip. It’s only tip up, but can be moved to the other side. The clip is inlet where it screws to the handle so it slides smoothly in and out of your pocket. If you like lanyards, Vosteed put a hole in there for one. I was also pleased with the handles shape, it allowed me to really hold onto the knife. If you are not into micarta, Vosteed also offers the Raccoon with G10 handles.

  The Raccoon came in a nice little metal tin. Inside the tin was a little zippered case with the Raccoon inside. Vosteed also included a patch, sticker, and cleaning cloth. But probably more important, they included replacement springs for the crossbar lock. Not because they break, but because they like to go flying if you completely dismantle the knife. 

  I was pleasantly surprised with the Vosteed Raccoon. For a $50 knife it has some great features. But besides that, it cuts really well. I attribute its cutting ability to the blade shape. This makes the Raccoon a great EDC knife. It just does everything well. The Raccoon is now in my rotation of EDC knives. If you are looking for something sharp to carry around, I would look into what Vosteed has to offer. The Raccoon really fits the spirit of the animal it was named after.

Firearms Insider Reviews - Key Points

Claim to Fame:

Crossbar lock EDC knife

Target Market:

Anyone wanting a decent pocket knife that doesn’t cost a fortune

Features & Benefits of this product:

  • Overall Length: 7.60" | 193.12 mm

  • Blade Length: 3.25" | 82.55 mm

  • Blade Width: 1.07" | 27.27 mm 

  • Blade Thickness: 0.125" | 3.20 mm

  • Blade Material: 14C28N

  • Flat ground

  • Drop Point Blade

  • Blade Finish: Black Stonewash

  • Hardness: HRC 60±2

  • Handle Length: 4.36" | 110.75 mm

  • Handle Width: 1.10" | 27.95 mm

  • Handle Thickness: 0.49" | 12.4 mm

  • Handle Material: Micarta

  • Weight: 3.04 oz

  • Pivot Construction: Caged Ceramic Ball Bearings

  • Pocket Clip: Stainless Steel (Tip-Up, Right/Left Carry)

What other aesthetic options or finishes are available?

Too many to list, check them out at Vosteed.com

What others are saying?:

Jacob J. - 5/5 stars @ Vosteed.com

My favorite knife, hands down.

I have three Raccoons in varying colors. They're all butter smooth, razor sharp and have great ergonomics. For the price point, it's absolutely my favorite pocket knife and I plan to buy more for family members. The fit and finish is phenomenal for a $60 knife, and the presentation with aluminum box, polishing cloth, and zipper case is great at this price point.

Link to other reviews:

TechWriter Review    

Price point:

MSRP = $59.00

Retail = $49.00 at Knifecenter      

I need it now! Availability:

Vosteed or KnifeCenter

Our Rating:

Pros:

  • Blade profile

  • Sharp

  • Micarta Handle

  • Crossbar lock

  • Price

Cons:

  • Jimping is not great

  • Blade Choil

Score: 7.50 Good

Favorite Link:  SwampFox Liberty review   

Vosteed Corsair

  Up for review is a Vosteed Corsair knife which was provided by the manufacturer. When I opened the box, In addition to the knife, it contained a Backspacer with a lanyard loop, cover plate, sticker, and a patch.  

  My first impression of the Vosteed Corsair is that it is well constructed and feels solid. The Micarta grip is nice and allows me to securely hold the knife with a convenient thumb ramp on the back of the blade.  The blade opens smoothly and is easily manipulated.  There is a reversible deep cover pocket clip for minimal visibility which is rounded to prevent pinching and snagging.  A plate is also included, along with two screws, to cover the open pocket clip slot.  All screws on the knife are countersunk which prevents snagging when removing the knife from your pocket.  

  The drop point blade of the Corsair is made from Nitro-V and is extremely sharp out of the box.  The blade design works fine for daily use allowing me to cut everything from paper to vegetables with minimal effort.   The blade lockup is solid with minor play in the blade pivot assembly, even when the blade is between the open and closed positions.  

  This is the first knife I have ever used with a crossbar lock, but it only took a few minutes to get used to the mechanism.  I found that holding the blade down and using my thumb and index finger would easily disengage the lock.  Make sure to keep your other fingers out of the way or break out the first aid kit (did I mention that the blade is very sharp?).  I have been using this knife for the past three weeks and it has made me a fan of crossbar locks.  

  Vosteed also includes a backspacer, which has a built in lanyard loop.  Installing this item increases the size of the knife by 0.25 inches.  I looked at this and, in the end, decided not to install it as I wanted less of the knife exposed when carrying it.  

  Vosteed offers a lifetime limited warranty to the original purchaser, the limitations are on their website. 

  I will give Vosteed credit as when I was looking at the reviews on their website, two of the reviews were negative (2-Star, 1-Star).  They could have easily removed the reviews but chose to leave them in place.  

  If you are looking for an EDC knife, the Corsair is a deal at $69 and is now part of my every day carry.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Reasonably priced EDC knife

Target Market:

Anyone who is looking for an EDC knife

FNBs (Features & Benefits of this product):

  • Overall Length: 7.58" | 192.48 mm

  • Blade Length: 3.25" | 82.55 mm

  • Blade Width: 1.04" | 26.49 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: Nitro-V

  • Grind: Flat 

  • Blade Style: Modified Drop Point

  • Finish: Stonewash

  • Hardness: HRC 60±2

  • Handle Length: 4.33" | 109.93 mm

  • Handle Width: 0.94" | 23.91 mm

  • Handle Thickness: 0.49" | 12.4 mm

  • Handle Material: Micarta

  • Handle Color: Black, Blue, Brown, Green

  • Weight: 2.91 oz | 82.5 g

  • Opener: Thumb Stud

  • Lock Type: Crossbar Lock

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Stainless Steel | Reversible

  • Carry Position: Tip-up 

  • Knife Type: Manual Folding

  • Pivot Collar Material: Copper

What other aesthetic options or finishes are available?

Black, Blue, Brown, Green

What others are saying?:

From the manufacturer’s website:

Great action, super sharp

Love the new knife from an appearance and (super sharp) blade perspective. The pivot is very smooth out of the box, too. The scales have some rougher/lighter colored bits on them, though, but that seems like something I can take care of myself.

I'm not sold on the bolt lock, if I'm honest. It works just as it is supposed to, though, from what I can tell. Liner locks just feel a bit safer to me.

I'm no pro, but this still seems like a lot of knife for $69. It fits in a pocket well enough. I'm happy.

Nice knife, but the handle?

Honestly it’s a nice knife, everything but the handle. Which the handle seems like plastic. Not over enthused not worth $70

Link to other reviews:

Metal Complex

Maxlvledc

Knife Know it All

Price point:

MSRP = $69.00

Retail = $69.00

I need it now! Availability:

Vosteed

Knife Center

Our Rating:

Pros:

  • Great value for the price

  • Action opens easily and smoothly

  • Blade is incredibly sharp from the factory.

  • Crossbar lock keeps the blade securely in place. 

Cons:

  • Some reviewers said the plastic handle felt a little cheap.  

  • Some reviewers did not like the crossbar lockup. 

Score:  8.50 Great

Favorite Link:  https://diversityshoot.com 

SEARCH