Gear

,

Young Manufacturing Chrome BCG

,

Young Manufacturing

Lightweight Chrome BCG Review

Written by: Buddy Murphy

  This is a review of the Semi-Auto/Full Auto M16 Complete Bolt Carrier Group (BCG), manufactured by Young Manufacturing Inc. This bolt carrier group is manufactured using MIL-SPEC quality steel and milled on their in-house CNC machines, ensuring precision and reliability in every component. The particular carrier in this review is their SLC (Super Lightweight Carrier), which they no longer have on their site, but can still be found for sale on 3rd party sites. All attributes from this carrier extend to their M-16 BCGs - except weight.

  Each bolt carrier undergoes a meticulous process of getting heat-treated, hard-chromed, and the bolt throat is then chrome-lined for enhanced durability and performance. They remove all sharp edges and rough finishes. Ensuring smooth operation and preventing any unnecessary wear and tear on your firearm.

  What does hard-chrome do for you? Well, it adds durability to the BGC and it makes the surface very hard so carbon has more of a problem sticking to it. Here are some before and after pictures. With half of a dry paper towel and about 10 minutes, this BGC went from this…

…to this.

  That carbon has been building up since Forgotten Weapon’s “Moons Out Goons Out” in March of 2024. It has done several other competitions and practices since – all suppressed in a direct impingement rifle. I have run Nitrided BCGs and they will get sticky (and NiB to a lesser extent) after getting a sufficient amount of carbon, this BCG did not get sticky. I have become a Piston AR snob because of direct impingement BCGs becoming inoperable without constant care, when shooting suppressed. But with this BCG, I am starting to question my own snobbery.

  Now, let me draw your attention to the innovative HMB Bolt by HM Defense, that is included in this carrier group. The HMB Bolt represents a significant advancement in bolt design by eliminating the traditional pass-through cam pin hole. Replacing it with a cam pin socket and radiused cam pin. This patented design addresses the inherent weak point in Mil-Spec bolts. It increases the amount of metal—and thus strength—at the cam pin location. The result? No more broken bolts, at least at the cam pin.

  Moreover, the HMB Bolt reduces contact between the cam pin and firing pin, allowing for smoother operation of the firing pin, bolt lugs, and aft gas rings. The cam pin socket also retains lubrication, ensuring extended operational performance.

  You may have noticed in the photos that the gas key is not staked, that is intentional. Here is a link as to why they don’t stake their gas keys from the Young Manufacturing President: Read it here. The long and short of it is if you do it well enough, they don’t need staking. The gas key is supported by a recoil lug, a feature designed to enhance overall reliability and function.

Firearms Insider Reviews - Key Points

Claim to Fame:

Very durable, easy to clean BCG, that still runs smooth even when filthy.

Target Market:

Suppressor host rifles, people who don’t clean their rifles, heavy use operators

Features, Benefits, and Specifications of this product:

  • Mil-Spec

  • Hard-chromed

  • Advanced design bolt

  • Full-auto rated

  • Operates smooth when dirty

  • Easy, in-field cleaning

What other aesthetic options or finishes are available?

M16 BCGs are also available in Black Nitride, with or without the HMB bolt

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $299.95 for M16 

Retail = Same 

I need it now! Availability:

Young Manufacturing or KE Arms

Our Rating:

Pros:

  • Hard-chromed, including the bolt throat

  • Advanced bolt design

  • Recoil lug supported gas key

  • No sharp edges

Cons:

  • Price

  • Some people will require staking the gas key

Score: 9.00 Amazing

,

Gnat Warfare Tactical Pig

,

Gnat Warfare

Airsoft RC Pig target Review

  If you want a fun training aid, that you may be able to do in your backyard, you need one of the Tactical Pig targets from Gnat Warfare. These are a radio controlled (RC) target that is intended to be used with airsoft guns for moving target practice. The “Pig” is a foam target that attaches to a 4 wheel drive RC car chassis. You will need a friend to drive while you shoot, but it is worth the enjoyment. We named our Tactical Pig Kyle, Gnat Warfare respectfully calls them “Kevin Bacon”, I will explain later.

  The Gnat Warfare Tactical Pig comes ready to go. All you need to do is charge the RC battery and install the supplied AA batteries into the controller. The Pig comes with a supplied charger to charge the RC battery. It charges relatively quickly, so you won’t have to wait long to start racing around the neighborhood. The instructions are awesome on how to hook everything up and pair the controller. These instructions have tons of pictures, so you hardly even need to be able to read. This process is so easy to get you up and going, that even a ten year old could do it.

  As for the size of the Pig, it is pretty standard for a 1/10th scale RC truck. The car part is approximately 13 inches wide and 18 inches long. The tires are 5 inches tall by 2.5 inches wide. This lends it to use in just about any terrain including backyards and shooting ranges. With the pig target, the total height is about 20 inches. When I first took the RC Pig out for a test spin, I was worried about it tipping over under sharp turns. Well, it did not. All it did was lift the front inside tire. 

  Kevin Bacon, as it is called, is essentially a small Javelina. This Javelina target measures about 22 inches long by 12 inches tall. It is made from 1 inch thick closed cell foam. This allows the airsoft pellets to stick into the target. If you are really close, they may go through, so as always, know your backstop. Especially since this is a moving target. Hitting the RC car part does not seem to affect it. The pellets just bounce off. The target just pushes into a “U” shaped piece on the RC’s frame. This makes changing it super easy. It also allows one to make their own targets and push them into the mount.

  Being this is an airsoft target, you will need an airsoft rifle or pistol to use it. I purchased a CO2 blowback one off of Amazon for $50 and it works well with the Tactical Pig. If you are looking for something to replicate the firearm you already use, I would look at what Umarex has to offer. Either way, this is not super expensive to get into, unless you want it to be.

  We call our Tactical Pig “Kyle”. Why? We had a neighbor once that was a motorcycle officer. He was on the short stature side, kind of like a javelina. So we thought the name was appropriate, lol. 

  Now that you know Kyle, we can talk about how he helps with training. Even though he is a small target, he does move, and move fast. These aspects help you train by shooting at moving targets. But not just moving in one direction like a lot of the moving targets we are used to. The advantage with Kyle is that he is unpredictable. You do not know what direction he will be moving, only the driver does. This makes him a vital training aid for real life scenarios, even if it is airsoft. If your airsoft pistol happens to be the same as your carry pistol, you can even do draw and fire practice. The training possibilities with the Gnat Warfare Tactical Pig are endless. 

  Everyone that shot, or drove, the Gnat Warfare Tactical Pig just loved it. It is so much fun to shoot at. Plus it gives you a fantastic training aid. If you have kids, they will love it also. Do yourself a favor and go check out “Kevin Bacon”, “Kyle”, or whatever else you want to call the Tactical RC Pig.

Firearms Insider Reviews - Key Points

Claim to Fame:

Radio Controlled airsoft target

Target Market:

Anyone who likes to have fun and shoot moving targets

Features, Benefits, and Specifications of this product:

  • Everything is included except the airsoft gun

    • RC frame

    • RC Battery and charger

    • Pig target

    • Controller

    • AA batteries for controller

  • Replaceable targets

  • Aggressive off-road tires

  • 4x4 RC suspension

  • Hobby-grade 7.2v NiMh battery included

  • 2.4Ghz radio extended-range control

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out 5 stars at Gnatwarfare.com

Chris H.

I have had this pig target for almost 5 years. It has proven to be extremely well built and insanely fun to shoot. Our kids love airsoft and the large wheels, independent 4 wheel suspension and powerful motor lets us drive anywhere on our property, and it’s fast! The battery seems to last forever. I actually still have the original batteries in the controller. The foam pig Silhouette target has been hit 10s of thousands of times and is barely scratched. The BBs make a satisfying loud thud with each hit, which can be heard at long distance.

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $299.00 

Retail = Same - Currently on sale for $99.99

I need it now! Availability:

Gnat Warfare or Umarex

Our Rating:

Pros:

  • FUN

  • Great training aid

  • Well made

  • 4 wheel drive

  • Large tires to go anywhere

  • Everything is included

Cons:

  • MSRP is a bit high

Score: 8.50 Great

Favorite Link:  Umarex Origin Review   

ShootingSight RPS Trigger

ShootingSight RPS AR15 Trigger Review

Written by: Buddy Murphy

  This is a review of the ShootingSight RPS Trigger upgrade kit. This kit features a 2-stage trigger and hammer configuration, compatible with the AR-15 and other platforms that utilize similar pivot pin spacing. This trigger is considered a National Match trigger and should be compared to others like the Geissele’s National Match.

  Should this hammer be black? No. That is carbon from heavy use suppressed in a direct impingement rifle. Does the trigger feel gritty? No, it is still very smooth.

  The sear surfaces have been meticulously lapped to achieve ultimate smoothness and feature a Nickel Boron (NiB) coating.  This makes the trigger highly resistant to wear and offers a low coefficient of friction, resulting in a smooth and consistent pull. Like most AR triggers, this is not adjustable.

  Let me take you back to High School physics class. Static friction is greater than kinetic friction because static friction acts when the body is at rest. Whereas in kinetic friction, an object is in motion. You can feel this in the trigger. Once the trigger starts moving towards the second stage wall, it feels less heavy than when you start moving the trigger. The reset is very positive and is just beyond the second stage wall, but not fully out to the first stages at-rest position.

  One of the standout aspects of these trigger/hammer sets is that they are CNC machined from alloy Rolled Plate Steel. Thus entirely avoiding the use of cast parts. The finer grain structure of this steel provides significantly greater tensile strength (about 10 to 20% stronger), better impact resistance, and less fatigue compared to cast steel. This allows for the sear edges to be precisely honed, resulting in an exceptionally crisp break that maintains its sharpness over heavy use.

  This trigger installs like any mil-spec trigger, nothing proprietary (look at you cartridge triggers). Which makes it compatible with any lower that accepts mil-spec triggers.

  Additionally, the RPS Trigger kit includes an extra powerful Wolff hammer spring, which delivers maximum ignition energy and an impressively fast lock-time of just 4 milliseconds. The second stage trigger creep has been virtually eliminated, ensuring a clean and crisp break with no felt travel in the second stage.

  I use this rifle for CMP (Civilian Marksmanship Program) practice every weekend (unless I’m trying out a different rifle), so this trigger gets a lot of use. I can tell when I am using a different trigger, it just isn’t as smooth, and my scores can tell too.

  The trigger pull weight is set at 4.5 (2.5/2.0) pounds, which meets the NRA/CMP minimum requirements for the Service Rifle class. Overall, the RPS Trigger upgrade kit is an excellent choice for those looking to enhance the performance and reliability of their rifle.

Firearms Insider Reviews - Key Points

Claim to Fame:

A durable, smooth, and crisp National Match trigger.

Target Market:

People who want to hit what they are aiming at. Seriously though, this is a great replacement trigger for any AR user and it conforms with minimum trigger weight for CMP or NRA competitions.

Features, Benefits, and Specifications of this product:

  • Match trigger

  • 2 stage trigger

  • 4.5lb total pull

  • 2.5lb first stage

  • 2.0lb second stage

  • Standard mil-spec dimensions and install

  • Curved trigger

  • Heavy hammer strike force

What other aesthetic options or finishes are available?

These triggers come in either raw metal or several colors (Tan,Blue,Red,Green,Pink,Black).

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found

Price point:

MSRP = $215.00

Retail = Same

They do have sales from time to time, but otherwise the price is the price. They also have Military/LE discounts

I need it now! Availability:

 ShootingSight.com

Our Rating:

Pros:

  • Smooth trigger, tactile reset

  • Strong steel

  • Standard install

Cons:

  • Price (but is comparable with other National Match triggers)

Score:  Great 8.50 if not 9.00

,

Vosteed Aluminum Raccoon

,

Vosteed Raccoon Aluminum review 

Years ago the only answers I wanted from knife reviews were “Is it sharp? Does it cut? Did it stay sharp? How much does it cost?”. The Vosteed Raccoon Aluminum folder is sharp, cuts well, stays sharp and is a great deal at $72 especially when you see how well it's built and works.

I was sent the Vosteed Aluminum Raccoon to review. This is the latest version of their Raccoon knife line. Chad did a review on the micarta version of the Raccoon last year. The difference between the two versions is the “Aluminum” has a Nitro-V blade steel and the CNC cut aluminum scales. 

The Vosteed Raccoon Aluminum uses a crossbar lock that you pull back to release the blade when it is closed. The blade can then be flipped open or dropped open. It also has a double thumb stud that is well designed. I like using the crossbar lock to release the blade. I don't know why, but I use that method most to deploy the blade.

The handles are CNC cut black aluminum arranged in a diamond pattern. The edges of the handles are rounded so they won't snag clothing or dig into your hand. The aluminum, diamond cut handles aren't aggressive like stippling on pistol grips, but my hands never slipped regardless of what I was cutting. The 3.25 inch drop point blade deploys smoothly due to the ceramic ball bearings.

   As you see from the included photos, I use my knives for food preparation. This knife chopped vegetables, deboned chicken thighs, sliced blocks of cheese, and easily cut large cardboard boxes into trash bag sized segments. Plus it still has a serviceable edge.

   One of the reasons I like being on the Firearms Insider Gun and Gear Review Podcast is because we actually use these products and tell the truth. This knife was used nearly every day for months. I would occasionally use a couple other knives that I am reviewing long term, but this was the main knife. It could use a good sharpening to bring back the razor sharp factory edge. However, I just peeled an apple with no issue. This Nitro-V blade steel holds an edge, I'm impressed.

   The knife shows some wear on the aluminum handles. Mainly because it has been smashed against my EDC light, the Streamlight Wedge. If you want a pristine knife, I am not the person to review it. You want a knife that is a good all around knife, that opens smoothly, and has a better than average blade steel for a good price, the Vosteed Raccoon Aluminum folder may be for you. 

Firearms Insider Reviews - Key Points

Claim to Fame:

An attractive, feature filled utility knife with good blade steel for a really good price.

Target Market:

Anyone wanting an attractive utility knife made with good steel that's very sharp under $75.

Features, Benefits, and Specifications of this product:

  • Blade Length: 3.25" | 82.55 mm

  • Overall Length: 7.60" | 193.12 mm

  • Blade Width: 1.07" | 27.27 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: Nitro-V

  • Blade Grind: Flat

  • Blade Style: Drop Point

  • Blade Finish: Black Coated

  • Hardness: HRC 60±2

  • Handle Length: 4.36" | 110.75 mm

  • Handle Width: 1.10" | 27.95 mm

  • Handle Thickness: 0.49" | 12.40 mm

  • Handle Material: Aluminum

  • Weight: 3.66 oz | 103.8 g

  • Opener: Thumb Stud

  • Lock Type: Crossbar Lock

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Reversible | Stainless Steel

  • Carry Position: Tip-up

  • Knife Type: Manual Folding

  • Backspacer Material: Aluminum

  • Backspacer Color: Black

What other aesthetic options or finishes are available?

Orange, Blue, Purple 

What others are saying?:

Nick the Knife

5.0 out of 5 stars

The Racoon continues to deliver

The Vosteed Raccoon is hands down one of my most carried knives and I have hundreds to choose from. The handle is simple, but genius. It offers a comfortable grip that will work well for almost any hand size. The drop point blade is robust enough to go to work with and has good slicing geometry. Nitro-V steel is tough, and while not having the highest edge retention, is easy to sharpen.

This version comes in with Aluminum handle scales. Generally Aluminum is not my favorite choice and I have no idea why it has become thought of as premium. People seem to have forgotten all the $10 Aluminum S&W knives of 20 years ago... Anyhow this Aluminum is nicely anodized and the green/brown color spoke to me. The finish is smooth, making this a Raccoon that will likely see lighter duty than my G-10 or Micarta variants.

The action is what I expect from Vosteed. They put out smooth operators, and this is no exception. The button lock lets the blade drop effortlessly into the closed position. Thumb studs are spot on for deployment. You can also engage the button and give a little wrist action to deploy. If you like to fidget, it does that. I prefer the crossbar lock version as it is inherently stronger than a button lock, but as I mentioned, I liked the looks of this model and it only had a button lock in this color. C'est la vie.

Overall, you really cannot go wrong with a Vosteed Raccoon for EDC. It is definitely one of my top 5 for 2023.

Link to other reviews:

Iridium 242 YouTube Review  

Price point:

MSRP = $72.00 

Retail = $72.00 at Blade HQ

I need it now! Availability:

Vosteed or Blade HQ

Our Rating:

Pros:

  • Very sharp

  • smooth opening

  • very good blade steel

  • affordable 

  • Blade Finish holds up well

Cons: 

  • The aluminum shows dings and scratches easily 

  • The jimping on the spine of the  is next to useless

Score: 7.50 Good

,

Sencut ArcBlast

,

Sencut ArcBlast Review

  With the prices of so many things going up, the amount of money in your wallet goes down. But if you are looking for a good quality knife that won’t take a massive hit on your wallet, then the Sencut ArcBlast would be a fantastic knife for you. Let’s check out all of the things that this great knife features and how it’s a great bang for your buck.

The Handle:

  The ArcBlast features an aluminum handle with a smooth finish. I normally like to have gripping on the handle. So when I took the knife out of the package and noticed that the handle was smooth, my first thought was “oh I’m not going to like this”. But I actually really like it. I feel like I can get a solid grip on it. One that doesn’t allow the knife to slip in my hand. The handle also has a great shape that fits really comfortably in my hand. Because of the smooth aluminum handle, the knife slides out of the pocket very easily. But not easy enough to fall out, due to the great pocket clip that comes on it. It will stay where you want it!

Opening:

  I’ve used a lot of different pocket knives over the years. Normally thumb studs aren’t my favorite style for opening, but I know it’s good to have different options for opening the knife. But on this knife in particular, I like how quickly the thumb stud deploys the blade. I find myself using the thumb studs more than the flipper. Although the flipper gives it a real quick opening and works fantastically. One thing that definitely helps with this quick opening is that it uses bearings at the pivot point. This gives it a quick and smooth opening.

The Blade:

  The Sencut ArcBlast features a 2.98” drop point blade made from 9Cr18MoV. This is a great steel for this price, and it’s widely used in lots of other knife brands knives. I have been using this blade for a few months now and working in an industrial environment. I use it a lot to cut open boxes, plastic wraps, and various other items. So far… I haven’t needed to sharpen it, but 9Cr18MoV does sharpen very easily. Another reason why 9Cr18MoV is an awesome steel, is that it is corrosion resistant. This is a great material for harsh environments where liquids and other corrosive materials may be present. So you will not have to worry about wrecking your knife.

The Lock:

  I have come across quite a few different button locks on different knife brands, but this is definitely one of the best in my opinion. The ArcBlast uses a standard button lock. This lock is used a lot in the Sencut, Civivi and WE Knives line of knives. They really have designed a fantastic lock, which is probably the reason they use it so much. The lock is great because it is easy to unlock, but not easy enough that it will unlock when you don’t want it to. This is due to the button being flush with the handle. So when you grip the handle, you don’t run the risk of accidentally pushing the button and unlocking it. 

  I have had a couple of Civivi knives, but I haven’t had a Sencut knife before. I definitely like this knife for many reasons. It’s a very sturdy knife with a smooth and comfortable grip. It also has a great 9Cr18MoV blade that has stayed sharp through lots of use. If you are wanting a great quality pocket knife that will not cost an arm and a leg, you should definitely check out the Sencut ArcBlast.

Firearms Insider Reviews - Key Points

Claim to Fame:

Smaller inexpensive quality folding knife

Target Market:

Anyone who doesn’t want to spend a fortune on an everyday carry pocket knife

Features, Benefits, and Specifications of this product:

  • Overall Length: 7.07" / 179.5mm

  • Width: 1.3" / 33.1mm

  • Overall Height (Include Clip): 0.66" / 16.8mm

  • Blade Length: 2.98" / 75.7mm

  • Closed Length: 4.09" / 103.8mm

  • Blade Thickness: 0.1" / 2.6mm

  • Handle Thickness: 0.46" / 11.6mm

  • Weight: 2.96oz / 83.9g

  • Blade Material: 9Cr18MoV

  • Blade Hardness: 58-60HRC

  • Blade Grind: Hollow

  • Blade Finish: Black

  • Blade Type: Drop Point

  • Handle Material: Aluminum

  • Handle Color/Finish: Black

  • Pocket Clip: Tip-Up, L/R

  • Clip Material: Stainless Steel

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Manual
Opener:
Thumb Stud
and flipper

  • Locking Mechanism: Button Lock

What other aesthetic options or finishes are available?

There are 4 different color options for this knife, but the materials are all the same. For the black blade you can get a black or red handle. And for the satin finish, you can get a black and blue handle.

What others are saying?:

5 out of 5 stars from Benjamin B. at Sencut.com

A Really Good Knife

I love the simplicity of the button lock. Also I think that the knife looks great and works like it should. Seems like it is very well made and I carry it all the time. I recently purchased another one to use at work. I plan on using my all black one at work because I work in a dirty environment, and the one with the red handle I will use as my e.d.c. when I am not at work.

Link to other reviews:

Stassa23 Knife Therapy  

Price point:

MSRP = $55.00

Retail = $46.75 on Amazon

I need it now! Availability:

Sencut or Amazon

Our Rating:

Pros:

  • It’s a fantastic knife for the price

  • Comes with tons of goodies and a case

  • It’s a very well made knife that holds an edge for quite some time. 

Cons:

  • I did accidentally bend the pocket clip when I sat down in a chair, but I was able to bend it back into place very easily.

  • A good amount of the anodizing around the top of the knife (opposite end from the clip) came off within 2-3 months. But that doesn’t affect the functionality of the knife at all.

Score: 8.50 Great

,

PR Trigger

,

PR Trigger review

  PR Triggers has come out with a product that is just plain fun. It is their G model Pull Release Trigger for Glock Gen 3 style pistols. What is a Pull Release trigger you might ask? It is a trigger that fires when you pull the trigger, and when you release the trigger. So essentially you get two shots fired with every full press/release cycle of the trigger. 

  Since I already mentioned what the PR Trigger does, let us get into what it is. The G model trigger is a drop in trigger assembly for Glock gen 3 and Gen 4 style small frame pistols. For instance, a G19, G17, or equivalents. The PR kit contains a trigger, red colored backplate, a new striker plunger, and a new trigger housing. So it is a complete drop in swap from your original trigger. 

  Installation is pretty straightforward. Basically remove your old trigger group and install the PR one. The exception is the new striker plunger. To install the plunger, you will need to take the backplate off your slide. Then remove the old plunger. The PR’s new plunger has an arrow on it. This arrow must face the front of the pistol. Once installed, PR Triggers recommends installing the included red backplate. This is so that you can visually tell that this is the pistol with the pull/release trigger. If you do not feel comfortable doing this yourself, please have a gunsmith install the PR Trigger.

   Once installed, it is time to head to the range, or garbage pit, to do some shooting. On some pistols a break in period is needed. I dry fired mine a lot, so that may have helped. When I first tried the PR Trigger out, I only loaded up a few rounds to get the feel of the pull/release system. This seemed to work well. When I loaded up more, the trigger did not always want to fire. I was getting light primer strikes. I ran a bunch of different style ammunition through it, all with the same problem. So I took the PR Trigger home, took it out of the Lone Wolf Arms and installed it in a Polymer 80. When I returned to the range with it, I was still having problems. I contacted PR and they had me send the trigger back. Customer service was fantastic and promptly sent out a new one.

  Once the new PR Trigger was installed in the Polymer 80, I returned to the range. The new trigger was running much better. So much so that I could get through a full 30 round magazine without any problems. Every so often I will run into a problem if I am using iffy magazines or really cheap ammo. Good quality ammo seems to run decent.

  After using the PR Trigger in just a pistol, I proceeded to add something that takes it to a whole new level. Recover Tactical sent me out one of their 20/80 stabilizer kits for the Polymer 80. The Recover 20/80 is a folding chassis system for various pistols. It uses a clamshell design that just encapsulates the pistol. The Chassis easily installs and removes by just one screw. The price is right on Recover 20/80 also. They run $100. All I can say is that this little chassis system takes the PR Trigger up about 3 notches. You now have support to help control that second shot. The Recover 20/80 just makes the PR Trigger so much more fun to shoot.

  Besides the initial problems, I do have one complaint. If you pull the trigger back, firing a round, and want to stop shooting, you have to hold the trigger back while you unload the gun. This is very awkward. Try this, drop the mag and cycle the slide sometime, all while holding the trigger back. Did I mention pointing the pistol in a safe direction while doing this? It is not super easy. I do hear rumors that PR is making one with a switch so you can just flip it and release the trigger without the pistol firing. Besides this one complaint, The PR Trigger is still great fun.

  The PR Trigger is just plain fun. I know I have mentioned it before, but when you shoot this thing, it just puts a smile on your face. It is probably one of the closest things you can get, legally, to a machine pistol. Especially if you run it in some sort of chassis like the Recover Tactical one. You definitely need to experience it for yourself.

  If you are in the market for something different, check out the PR Trigger. It is well made and reasonably priced. Especially if you compare it to other triggers that are similar in function. It is not really practical, but sometimes fun overrules practicality. And the PR Trigger does that with flying colors. Go check out the G model over at PR Triggers.

Firearms Insider Reviews - Key Points

Claim to Fame:

Glock Trigger that fires on the pull and release of the trigger 

Target Market:

Anyone who likes to have fun

Features, Benefits, and Specifications of this product:

  • Drop in complete system

  • Fits gen 3 glocks and some copies

  • Fires on pull and release

  • Increased rate of fire

  • Easy install

  • ATF Compliant

  • Lifetime Warranty

What other aesthetic options or finishes are available?

None as of now

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Chris from the 740 on YouTube   

Price point:

MSRP = $249.99

Retail = $199.99 at JSD Supply

I need it now! Availability:

PR Triggers or JSD Supply

Our Rating:

Pros:

  • Fires on pull and release of the trigger

  • ATF compliant 

  • Fun

  • Works even better with some sort of chassis system

  • Lifetime warranty

Cons:

  • First trigger sent didn’t seem to work with my setup

  • Doesn’t always fire depending on ammunition type

  • If trigger is pulled back and you don’t want to fire, you must unload the pistol

Score:  7.00 Good

SEARCH