timber creek

AR Build: A young woman's perspective

A young woman’s perspective on building an AR15

  So I pitched the idea of building an AR to my daughter and writing something about it. She thought it would be fun. I am not sure if she was humoring me or not. But either way, here we are with an awesome AR15, that she built herself. A special thank you goes out to all the great companies that helped sponsor this build, you can read about their parts later in the story. 

From Zoe:

 Putting together my AR was much more interactive than I expected it to be. In a way it was simple, yet complex. Many little pieces combine together like a delicate puzzle, but also a straightforward process to get to the final outcome. There were many different steps to complete to bring it all together. One of the most tedious was putting all the pins into place! Those slippery little rascals!

  When putting the AR together, all of the parts fit perfectly. Between all the different parts, and parts kits, almost everything needed was there, even little tools for some of the steps! Everything was beginner friendly (although having my father assisting me helped a ton). I enjoyed the experience and the reward was incredibly worth the time put into it. Building the AR also helped me feel closer to my dad and the big parts of his life. As a young woman, knowing that there are places that put these part kits together brought me a sense of safety. I am able to build something to provide protection for myself. Plus I got to learn the intimate process of building it, in turn making me a safer firearms owner and a safer young woman.

  Shooting it was a lovely experience. The parts used were all relatively light in mass and resulted in a very lightweight gun. Having to hold it for long periods was undemanding. Shooting it was like a well polished machine. There was very little recoil when firing the rifle. It also functioned flawlessly and did not jam. One thing that I did struggle with was pulling back the charging handle. Which can be a common issue as a woman, since our upper body strength is usually lower than are male counterparts. Charging the firearm is easier than other guns I have shot because of the larger size charging handle. All of the parts worked as expected and I was very satisfied with the experience as a whole. 

  I am so grateful to have had this opportunity. It provided me with important skills, and knowledge of firearms, that I did not have before building this AR. To any young woman who feels she needs confidence and a sense of security, I would highly recommend learning the safety and process of building a firearm. There are things out there to make life a little safer, and I believe this is one of those. 

Stay safe out there ladies.

Sponsored parts used in Zoe's AR build:

This AR15 is built for .223/5.56, so everything listed below is for that particle caliber rifle.

  When it comes to AR parts, there are many. We were fortunate to have some great sponsors who supplied top notch parts for this build. A lot of these are colorful, literally, but they are all high quality parts. 

  First up is the backbone of any AR build, the lower receiver. Our friends over at Foxtrot Mike Products sent one of their stripped lowers. These are billet receivers with a slightly enlarged trigger guard and a semi built-in magazine well. The Magazine well is 3D machined to give it a super smooth transition when loading magazines into the rifle. The Foxtrot Mike lower has a bunch of small added features that make it a little nicer than your run of the mill lower receiver. One of those is the ability to run a ball detent on the safety. That little detail makes a safety selector work so much smoother. 

  Since that lower receiver needs parts to make it function, ArmaSpec sent a stainless Lower Parts Kit (LPK) and their Stealth Recoil Spring. ArmaSpec’s LPK is one of my favorites. It comes with an ambi safety selector that does 45 and 90 degree throws. We did not use the ambi selector in this build, but I did install it elsewhere. All the springs and detents in the LPK are well made and I have no doubt that they will give the rifle years of use. The Stealth Recoil spring, that ArmaSpec manufactures, is a wonderful piece of equipment. Its complete unit replaces the conventional AR buffer and spring. It is called “Stealth” because it reduces the “twang” noise sometimes heard in normal AR’s. The Stealth Recoil system smooths out the cycling of the firearm and also reduces recoil, which was noticeable by how soft this AR shoots.

  If you want a barrel and need it to look fancy, Faxon Firearms has you covered. Since Zoe wanted something “pretty”, we went looking. Faxon has a match grade 16” Gunner series barrel that happens to come in “Chameleon” PVD. This color option fades from pink to purple, to blue, and then to gold. A perfect option for someone wanting color. It also looks amazing under the Robin Egg blue color scheme. Faxon also sent a gas tube and a 0.625” gas block to round out the package. This barrel is not only super accurate, but it is fairly lightweight too.

  When you are building an AR of this quality, you do not want to skimp on the Bolt Carrier Group (BCG). After all, this is what makes the firearm function. Walker Defense sent us one of their Nickel Boron BCG’s. Nickel Boron provides enhanced reliability, easier cleaning, and better lubricity. Walker’s BCG is super slick, literally, and has all the top tier options someone would want. It uses a properly hardened 9310 bolt, has properly staked OCKS screws, is magnetic particle inspected, uses a hard chrome firing pin, and has a M16 carrier profile. Walker Defense’s products are also 100% made in the USA with US components. 

  To finish out the build, and add a whole lot of color, Timber Creek sent an Enforcer build kit. These are fairly lightweight kits which work well when you are worried about the final weight of the rifle. Zoe opted for the Robin Egg Blue cerakote color version. The Enforcer kit comes with a ton of parts for your build. In this case, the Robin Egg Blue parts we used were the 15” handguard, pistol grip, charging handle, safety selector, buffer tube, end plate, port door, extended mag release, forward assist, and takedown pins. We also used the supplied muzzle brake, but it only comes in basic black. Timber Creek's Enforcer kit also comes with a 0.750 gas block, which we didn't use due to using a 0.625 barrel. We also did not use the trigger guard since we used a billet lower that has the trigger guard built in. 

  I want to mention two things about the Enforcer kit. First up is the Ultra Light M-Lok handguard. These handguards, by themselves, are stupid lightweight. They also have holes for QD swivels. Making it easier to add a sling. There are also plenty of M-Lok slots along the whole rail for adding whatever you want. The second thing I want to mention is the oversized charging handle. This handle is significantly larger than most. Zoe mentioned it made charging the rifle easier due to its size. I had never thought of this, but because you can get a good grip on it, it works better for those that have a smaller stature. 

  As we all know, you need a way of aiming a rifle. Since this AR is not being used for distance shooting, She opted for a red dot. Why? Because it is lighter than a 1x prism sight. Primary Arms Optics sent us one of their MD-25's with the 2 MOA dot. The Primary Arms MD-25 is a great red dot. It has a large window size and is pretty lightweight. Battery life is really good thanks to it having Primary Arms’ Autolive function. The Autolive turns the dot off after a few minutes of non use, and then turns it back on when it gets moved. The MD-25 is a great option for a defensive rifle. 

  Now you may have noticed that we are missing a few parts. We supplied the stripped upper receiver, stock, and trigger. Most stripped uppers are very similar and fairly cheap, so I just purchased one. When it comes to stocks, there are a lot of personal preferences. We just opted for a Hogue AR stock. They lock up tight, have a good feel, and are inexpensive. If you noticed, the LPK was not one that included a trigger. I had a TriggerTech Duty Trigger laying around. It is the 3.5lb version. This trigger is a really good option for someone that doesn't shoot a lot. Yes, it feels really good, but with the 3.5lb pull weight, it works well for beginners and seasoned pros alike. 

  Now my daughter has her own AR15. The experience of helping her build her own rifle will not be forgotten anytime soon. She has a life saving tool that will give her a lifetime of protection and enjoyment. 

Timber Creek 30mm scope mount

  If you know anything about Timber Creek Outdoors, it’s that they make bright anodized and cerakoted AR parts. They happen to have a new 30mm cantilever scope mount. This mount is part of their “Enforcer” line of AR parts. Because of this, it comes in all of Timber Creek's colors.

  The Enforcer Cantilever Scope mount is a top quality scope mounting platform. It is made from 6061 aluminum. This gives the mount plenty of strength while still being lightweight. It weighs in at 6.56 ounces on my scale. This is quite a bit lighter than a lot of mounts in this category. Yes, it is for use with 30mm scopes, so you have plenty of options in the optics arena. There are 4 clamping screws to clamp it to your picatinny rail. These screws also act as the recoil lugs for this mount, making it extremely rigid to the mounting rail. Timber Creek also uses Torx head screws throughout, so no stripping the heads out on this mount.

  I opted for the Tungsten Grey cerakote finish on the Cantilever scope mount. As mentioned, the mount comes in Timber Creek’s assortment of colors. Some are anodized and some are cerakoted. From previous experience, I know that Timber Creek does a great job with their anodized colors. This is partly why I chose Tungsten cerakote. The cerakote on this mount is nicely done also, in fact maybe too nice. When I installed the scope, I had to sand the cerakote down inside the rings. Not all of it, just enough to smooth it down because there was some slight binding during the initial installation. The slight sanding cured it. I attribute this to the Tungsten cerakote being a slightly rough finish. Other products I’ve used with Tungsten cerakote also have this same feel to them. I suspect that smooth cerakote options, as well as the anodized ones, might not have this problem. But I really do like how the mount looks on a black AR, it adds just a hint of some color.

  Ring height on the TC Enforcer scope mount is 1.5”. Why do you care, you might ask. The 1.5” height is pretty much an industry standard. This height also gives you a proper cheek weld, on an AR rifle, with most optics. I installed a Primary Arms SLx 4-16x44 into the cantilever mount. There is plenty of room between the rail and the objective lens. I’d venture to guess that all 50mm objective lens scopes would still have plenty of clearance between the scope and the rail. Being a cantilever style mount, it also places the scope farther forward to give you proper eye relief on your favorite AR rifle.

  The Timber Creek cantilever mount won’t have any problems living on your AR rifle. But, I wouldn’t hesitate to use it on something larger. With those 4 mounting lug screws, it should handle some serious recoil. You could even mount it up on a bolt gun, if so inclined. It only comes in a standard 0 MOA base, but for most of us, that won’t make any difference. I’m pretty pleased with what Timber Creek has done with this mount. Being in the Enforcer line, means that it will match other Enforcer series parts.

  Timber Creek has done a fine job with the Enforcer Cantilever mount. It’s rugged and lightweight construction should last you eons. Having colors to match your other AR parts is a bonus too. If you are looking for a lightweight scope mount that is made in America, go check out the Cantilever mount from Timber Creek Outdoors

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight 30mm cantilever scope mount

Target Market:

Anyone who wants a lightweight scope mount, especially for AR style rifles

FNBs (Features & Benefits of this product):

  • Made from 6061 aluminum

  • 30mm ring size

  • Ring Height - 1.5”

  • Cantilever design

  • Weight - 6.56 ounces

  • 4 clamping screws also double as recoil lugs

  • Torx screws throughout

  • Made in USA

What other aesthetic options or finishes are available?

Different anodized and cerakoted colors

Price point:

MSRP = $224.99

Retail = Same

I need it now! Availability:

Timber Creek Outdoors or maybe Primary Arms

Our Rating:

Pros:

  • Lightweight

  • Rugged

  • Color options

  • Made in USA

  • Standard 1.5” height

Cons:

  • May need some fitting or sanding

  • No 34mm option as of yet

  • Price might deter some buyers

Score: 7.50 Good

Favorite Link:  Walker Defense

Timber Creek Enforcer Build KIt

  By now, everyone knows that you can do just about anything to an AR style rifle. Timber Creek Outdoors can definitely help you with that. They have their Enforcer Build Kit. The Enforcer Kit is a complete upgrade kit for your modern sporting rifle. Besides basic black, the kit comes in a variety of colors, some anodized and some Cerakoted.

  To be a little different, I asked for the Enforcer kit in purple. The purple is one of the anodized colors that Timber Creek offers. I like the look of anodizing, as it has that “high gloss” look. This purple does not disappoint. The anodizing is spot on and all the different parts match. Matching anodizing, from batch to batch, is not super easy. But Timber Creek pulled it off.

  Down in the FNB section, it shows what all comes with the Enforcer kit and it is a lot. I’ll go over most of the parts individually, at least the important ones. All of the parts come in one nice box. Small parts are in bags, in the buffer tube. On the back of the box is essentially a parts break down, and where those parts go. I also put together a list of what else is needed to complete a full rifle. Some of these parts can also be purchased from Timber Creek, like the barrel and castle nut, these additional parts are as follows:

  • Castle nut

  • Buffer and recoil spring

  • Trigger

  • Bolt catch

  • Mag catch

  • Upper/lower

  • Buffer retaining pin & spring

  • Barrel 

  • Stock

  • Gas tube

  First up I’ll start with the lower receiver small parts. The extended mag release has a nice little downward curve to it and isn’t too large. I really liked it’s function as it isn’t any higher than the standard mag release, it just sits back closer to the trigger finger. TC’s oversize trigger guard is wider also. It’s pretty oversize, so much so that I think a Sasquatch could get his finger in there. Then there are the take down pins. They add color, but are undersized in the kit I received. They wobble around and make the upper to lower fit, fit loosely. I had standard pins in this kit before, and they didn’t have these problems.  Maybe not a small part, but it attaches to the lower, is the mil-spec 6 position buffer tube. It does not, however, come with a castle nut. A QD endplate is also included.

  Also included for the lower is an ambi safety selector. This safety is reversible, meaning that it is either 45° or 90°. I was happy to see this, as I like 45° safeties, so that is how it was installed. Two selectors are provided, one is about standard length, the other one is shorter. This is pretty standard for ambi-selectors. They attach to the safety selector piece with some allen head screws, I did use a little Loctite 242 when installing them. I wasn’t sure how I was going to like the shape of the safety, it is a kind of tear drop shape with serrations . After using it, I do really like it, especially the serrations. These serrations let my thumb know that it is in contact with the safety.

  The Timber Creek pistol grip is one of their oldest products. As with all of the Enforcer kit parts, it is aluminum and CNC machined. They skelontonized the grip to save weight. It has a finger rest/stop at the heel to help prevent your hand from sliding off. There is also a beavertail for comfort. Plus some grooves on the front to aid with grip. In my opinion, the grip is a little on the slick side. It is very comfortable, but needs a little more texture to help me grip it. 

  Next we move on to the upper receiver. Only two small parts here, the dust cover and forward assist. The dust cover adds a nice contrast to the upper. The one supplied doesn’t like to stay closed. If you bump the rifle too hard, installing a magazine for instance, the door flips open. The forward assist works as expected. It has checkering on the face of it for extra grip, just in case you have to use it.

  Timber Creek’s Enforcer charging handle is a work of art. It has ball bearings inside it, thus giving the handle arms super smooth actuation. The oversize handles stick out a bunch on either side, making it truly ambidextrous. By making the handles so large, one hand operation is extremely easy. Even if one were to mount a large scope, they would have easy access to the charging handle. The handles are slightly curved forward with grooves on the front face. Pretty much eliminating your hand from slipping off during use. I personally would have liked Timber Creek’s small charging handle to be in the kit, as this one is just a tiny bit too big for my liking. It is, however, an excellent charging handle.

  Probably one of the most notable parts in the kit, is the 15” Ultralight Enforcer handguard. This handguard is super skeletonized and weighs nothing. If you pick it up by itself, without the barrel nut, it is like picking up air. The complete handguard assembly weighs something like 7.6 ounces with the barrel nut! Since it is the ultralight version, the handguard has a short rail at the front and back instead of running all the way across the top. I really like these style of handguards, as I never use the middle of the pic rail anyhow. There is a unique “Timber Creek” curve at the nose of the handguard. This curve is useful to keep brush and stuff from getting caught in it out in the field. Plus, it looks pretty good also. Now, if you need to attach anything else, the handguard has M-Lok slots running along the top, sides, and bottom. There are also QD holes for attaching slings and such. These are the good ones that have anti-rotation cuts every 45°. There are five total. One on each side, at the front and rear of the handguard. Then there is one on the bottom rear, just in front of the clamping system. Timber Creek uses a clamp system, with some extra set screws, to hold the handguard on. There are also wings, that extend over the upper receiver, to help keep it from rotating. I think the clamp system works just great, so the probably didn’t need the wings. But, extra insurance is always a good thing. For as light as this handguard is, there is less flex in it compared to other lightweight handguards. At least that’s my experience with the same length ones that I have used. The Enforcer lightweight handguard is well worth the price of admission.

  To round out the kit, Timber Creek throws in their muzzle brake and gas block. The gas block is low profile to fit under the handguard. It is the two set screws on the bottom type and about an inch long. It looks goog, and works great. The “Heart Breaker” muzzle brake is a two chamber style, with two holes on the top to reduce muzzle climb. The chambers are heart shaped, hence the name. I was hesitant about this brake at first. Yes, the brake proved me wrong. It works way better than I had ever imagined. It is really loud, but that was expected. My daughter even mentioned the lack of recoil while using it. Instead of a crush washer or shims, the Heart Breaker comes with a locking jam nut. Think of it as a nice little bonus in the Enforcer kit.

  Now that all the parts are pretty much covered, here’s my thoughts. If you value quality parts, these are top notch. Timber Creek did an awesome job with most of the stuff in the kit. I really enjoy shooting this rifle, it handles so nice with the lightweight parts. The rifle in the pictures weighs in at 6 lbs 14 ounces with the red dot. But, it uses everyday standard internals and a 16” heavy profile barrel (lightweight barrel would save roughly 8 ounces). The handguard and ambi-safety are probably my 2 favorites. They just work great.

  The Timber Creek Enforcer Build Kit is a great upgrade. If you are looking to build a new rifle, add color, or just upgrading your old one, the Enforcer kit is pretty much a worthwhile option. One might think it is a little pricey, but you are getting quality parts. These parts would definitely cost you more if you were to buy them individually. Definitely go check out Timber Creek Outdoors and all of their stuff.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Complete accessory kit for AR style rifles

Target Market:

AR builders, those wanting to accessorize their rifles

FNBs (Features & Benefits of this product):

  • 15" Ultra-Light Handguard – MLOK

  • Enforcer Oversized Ambidextrous Charging Handle

  • Forward Assist

  • Billet Dust Cover

  • Enforcer AR Pistol Grip

  • Oversized Trigger Guard

  • Ambidextrous Safety

  • Extended Magazine Release

  • Takedown Pins

  • QD End Plate

  • Buffer Tube

  • Low Profile .750 Gas Block

  • .223 Heat Breaker muzzle brake

  • Pins, etc included for supplied parts

  • Made is USA

What other aesthetic options or finishes are available?

Black, Blue, Red, and Orange anodized

Burnt Bronze, Flat Dark Earth, OD Green, and Tungsten Cerakote

What others are saying?:

Nothing found on the “kit”, just individual parts

Link to other reviews:

Nothing found on the “kit”, just individual parts reviews

Price point:

MSRP = $749.99

Retail = $599.99 at Palmetto State Armory

I need it now! Availability:

Timber Creek, Black Bag Resources (call and mention Gun&Gear Review podcast), or Palmetto

Our Rating:

Pros:

  • Color, Color, and more Color

  • 45 or 90 degree safety

  • Handguard

  • Lightweight

  • Jam nut for compensator included

  • Made in USA

Cons:

  • Takedown pins slightly too small

  • Port door doesn’t stay closed

  • Castle nut not included

Score: 8.00 Great

80.jpg

Favorite Link:   Gun & Gear Cult