Review

Mantis Blackbeard X

  When it comes to firearms training, dryfire systems are key. These systems let you practice at home safely and less expensively. Mantis has enhanced their awesome Blackbeard AR15 dry fire system and upgraded it to the Blackbeard X. The Blackbeard X incorporates both the Mantis Blackbeard and their X line of products. This gives the user a fantastic AR training system.

  The Blackbeard X system needs some back info to really explain it. The original Blackbeard system had a self resetting trigger, a laser, a battery pack, and an app. The Blackbeard X also has these, but it incorporates the movement part of the Mantis X series of products. You can read our previous reviews of the Mantis X10 and the Mantis Blackbeard. One might ask what the laser is for? The laser allows the user to physically see where your shots are going, or it can be used with various apps that read where the laser hits. Mantis has their own system for this called the Mantis Laser Academy. I haven’t used the Mantis version, but I tried a few others and the Blackbeard X laser worked with them. 

  Having the ability to measure movement is where the Blackbeard X really shines. It has an accelerometer and gyroscope built into the battery pack. This allows it to read movement. In the app, when the Blackbeard X system is turned on, it opens up movement categories. Under the BBX heading in the app are BBX Dynamics, Transitions, and Plate. Under those are various movement drills. The Dynamics basically analyze your shooting and tell you what's wrong. The transition drills are self explanatory, they analyze your shooting plus movement. This applies to the Plate category also, but it is set up for steel challenge type drills. In all of these, Mantis rates you on your Efficiency, Transition, Over Travel, and a Delay time. These ratings are in a “score” factor up to 100. Some parts of the app also give you a total time reading. The nice thing about time, is that the app gives you graphs and live movement recordings to look at. In these are things like shot delay, split times, and transition times. Since I shoot Steel Challenge style matches a lot, I found the Plate section of the app to be very useful. Plus they are all pretty fun to do.

  Besides all the new movement features of the Blackbeard X, it still retains all the old features of the original Blackbeard. So, you get that self resetting trigger system on your AR. I say “your” because the Blackbeard X still slides into your AR. Therefore your trigger system, rifle weight, optic, etc are still in use, unlike those other systems. This is one of the biggest advantages to the Blackbeard systems. 

  To fit the X system into the Blackbeard system, Mantis gave you a standard capacity magazine. Okay, it’s not a real magazine, instead it is the battery pack. But included in the battery pack, is the X system. It has a little flap, at the bottom of the magazine, to turn it on. When this happens, a blue light blinks until the app has paired to it. Then it turns a solid blue. The original Blackbeard had a shorter battery pack. The Blackbeard X’s is longer because it houses the X parts that let it read movement.

  Having used the Blackbeard extensively, moving to the Blackbeard X was easy. I was pleasantly surprised at how well it read movement from target to target. I really liked that it told me if I had over passed the target and had to move back. You don’t really notice it until you see it on the graph. It even will play your movements for the particular drill. So you can see what you are doing along the timeframe that it took you to shoot the drill. My only complaint about the Mantis systems is that there is zero felt recoil. Maybe the next upgrade will have some sort of perceived recoil. Other than that, the Blackbeard X has a lot of good training options in it. 

  The Blackbeard X system is a really nice AR dry fire training aid. It gives the added feature of movement tracking. If you want one of the best dry fire training systems, you can’t go wrong with the Mantis Blackbeard X. Pair it with the Mantis Laser Academy and you get even more data. Plus it’s fun and you can compete with your friends. If you want an AR dry fire system, look into the Mantis Blackbeard X. It is a very useful tool to have.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

AR dry fire training system with built in analytics

Target Market:

Anyone wanting a dry fire training system for their AR15

FNBs (Features & Benefits of this product):

  • Trigger reset system

  • Battery pack - size of 30 round magazine

  • Includes Mantis X system in battery pack

  • Laser for use with training apps

  • App includes diagnostic tools and training aids

  • Motion based analysis of weapon movement

  • With or without Laser

  • Uses everything on your AR - sight, trigger, etc

What other aesthetic options or finishes are available?

No laser, IR laser, or Red laser 

What others are saying?:

5/5 stars from Harrison B. at Mantisx.com   

Excellent training tool. The resetting trigger lets you practice follow up shots and the built in Mantis allows you to track your split times. It isn’t inexpensive, but it’s cheaper than 1,000 rounds of ammo at current market value, and it allows for significantly more practice than that.

Link to other reviews:

American Gun Facts   

Price point:

MSRP = $299.00 - $349.00

$349 as tested with green laser

Retail = Same

I need it now! Availability:

Mantis

Our Rating:

Pros:

  • Drop in system that uses your rifle

  • Movement tracking

  • Battery is same size as 30 round magazine

  • Training options in app

  • Laser can be used with other training systems

Cons:

  • Pricey

  • No recoil

  • Battery life isn’t as good as original Blackbeard

Score: 8.00 Great

Favorite Link:  Rough Cut Holsters   

Kaiser X-7 Blackbird receiver set

  When you think about lightweight AR’s, you usually don’t think of composite hybrids. Kaiser US is here to change that, and in a big way. Kaiser has plenty of experience in the hybrid AR market with great product success. Recently they introduced a new Titanium-Graphite composite AR15 receiver set called the X-7 Blackbird. The name pays tribute to the SR-71 Blackbird spy plane, a composite plane that was way ahead of it’s time, thus similar to the X-7 Blackbird receiver set. After having Mike, from Kaiser, on the podcast, he offered to send me one of these hot new Blackbird receiver sets for review.

  Let’s talk a little about this Ti-Graphite composite. There are a lot of misnomers about composite, or plastic, receivers. Even though some of these are true, they do not apply to the Kaiser X-7 Blackbird, or any of Kaiser’s other receivers. This is because Kaiser engineered the composite receiver, so it is not just your everyday “polymer” like the others. It has more material in certain places to help with strength. But Kaiser doesn’t stop there. They wanted it to be stronger than the standard aluminum AR15 receivers. So they put titanium and anodized aluminum inserts into the places needing strength. For instance, some of these places are the threads for the buffer tube and the barrel nut threads. The Blackbird’s Ti-Graphite composite also adds in some more strength, simply because the titanium and graphite are molded into the composite. Another huge advantage to the Ti-Graphite composite is its lubricity and wear resistance. Essentially, it is so smooth that very little to no lubrication is needed. I still put some oil on the BCG, but it cycled smoothly without it. So what does this Ti-Graphite composite get you? It yields a super strong upper/lower receiver set that weighs in at 9 ounces stripped. For comparison, a standard stripped, forged AR15 lower receiver, without an upper, weighs 8.8 ounces.

   Besides the Blackbird being a super lightweight receiver set, it also has some other enhancements. Up first is its textured magwell. Not only is it textured on the side, but the front as well. This texture consists of raised rectangles. For those of us that grab the magwell with your support hand, this gives you a good, no slip, grip on the Blackbird. The magwell is also beveled to help get those magazines changed quickly. Next is the fit between the upper and lower receiver. It’s tight! I have never had a matched receiver set fit like this before, in a good way. I can push the receiver pins out, hold the upper, and shake it vigorously before the two halves come apart. If you are using the Blackbird for a precision style rifle build, this fitment would be perfect and would definitely help in the accuracy department.

  With the X-7 Blackbird being engineered differently, it has a few slight differences. All of them are good, just different. First, since the lower receiver is slightly wider than a standard aluminum one, at least in some spots, it can’t use standard anti-walk pins to hold the trigger in place. Standard trigger pins will work, but there is no reason to use them. Kaiser gives you their proprietary V2 anti-walk trigger pins, as well as the allen wrenches to install them. These V2 pins work for any trigger you wish to install into the Blackbird lower. It pretty much accepts any mil-spec or drop in AR trigger. The X-7 Blackbird also uses a proprietary port door on the upper receiver. As with the trigger pins, the lightweight port door assembly is also included. Most standard and ambi safeties will work with the Blackbird. I installed a Timber Creek ambi safety and it works well. Because the Blackbird is about weight, Kaiser also includes a skeletonized titanium grip screw for mounting your favorite grip. I went with the old A2 style grip, because it is one of the lighter weight grips around. The Blackbird upper receiver also does not have a forward assist. My guess is to save weight, since the forward assist isn’t always needed. The last two differences have to do with assembling the lower and upper. Instead of being able to put the rear takedown pin spring in normal, it now goes under the pistol grip, similar to the safety detent. I have zero problems with this, it's just different enough to mention. When installing a barrel and handguard onto the Blackbird, Kaiser recommends the use of a “reaction rod”. This prevents the upper receiver from being over torqued and damaged. They also only recommend 30 ft lbs of torque on the barrel nut as to not cause any unseen damage to the receiver.

  A little bit about the build with the X-7 Blackbird receiver set, is in order. I wanted to try and make this build pretty light, since the Blackbird is so light to begin with. I basically took an assembled AR pistol and took it apart, that way I could use the lightweight parts on the Blackbird. These consisted of a Faxon Lightweight 10.5” pencil barrel, a Walker Defense Titanium BCG, a Dark Hour Defense Magnesium handguard, and some other miscellaneous parts. What this gave me was an AR pistol that weighed 4.2 lbs without an optic. That is with parts that one can buy everyday, no custom special parts here. If you were to put a small lightweight red dot on it, it wouldn’t weigh much more. I did install a larger red dot, a finger stop, and a light. This only brought the weight up to 5.2 pounds, which is respectable with a light. It is possible to get the Blackbird to below 4 lbs without sights, I just haven’t tried to do it yet. One could put a shorter handguard and some titanium small parts to help reduce the weight even more. I am happy with how this build turned out. When you pick it up next to my decked out 11.5” SBR, it feels like it weighs nothing.

  How does it shoot? “Fantastic” would be the first word to come out of my mouth. The Ti-Graphite composite makes it so smooth. There really is barely any recoil, partly due to the Ti BCG and adjustable gas block. But It’s smoother feeling than when the same parts were in a standard aluminum receiver set. Double taps are super easy and quick to make. Essentially, this lightweight Blackbird receiver set makes an awesome place to start your lightweight AR build. I’m sure full Blackbird rifles will be available soon if building isn’t your thing.

  In the end, if you are looking at a lightweight AR15 receiver set, the Kaiser Blackbird can help you out. This Ti-Graphite matched upper/lower receiver set is one of the strongest and lightest ones around. The Blackbird is way lighter than its nearest, more expensive competitor. Don’t be scared by those who say “plastic” will break, they haven’t used the Blackbird and they probably haven’t ever heard of Kaiser US either. So, if you want one of the lightest AR’s around, start with the Kaiser X-7 Blackbird receiver set and don’t look back. You’ll be getting a quality product that will perform above your expectations.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Ultra lightweight AR15 receiver set

Target Market:

Anyone wanting a lightweight receiver set

FNBs (Features & Benefits of this product):

  • Titanium Graphite Composite Material

  • Titanium & anodized aluminum inserts at all critical wear points

  • Beveled mag well

  • Compatible with any Mil-Spec drop-in trigger

  • Compatible with all Mil-Spec and most aftermarket grips

  • X-7 Weight - 9 oz, for the complete receiver set

  • Non-Slip texture

  • Skeletonized Titanium Grip Screw included

  • Ejection Port Cover (EPC): Proprietary for X-7 EPC /Spring /Rods (Included)

  • V2 System: Anti-Walk Trigger Pins (included), Proprietary for X-7

  • Trigger Pin Screws and Allen wrenches included

  • No Forward Assist

  • Zero Corrosion

  • Impact Resistant

  • Maintenance: No Oil or Lubrication Necessary

What other aesthetic options or finishes are available?

Midnight Grey

What others are saying?:

Could only find stuff on the Monarch series

Link to other reviews:

Only found Monarch series reviews    

Price point:

MSRP = $375.00

Retail = $356.00 at Rainier Arms

I need it now! Availability:

Kaiser US

Our Rating:

Pros:

  • Super lightweight

  • Smooth operation

  • Tight upper/lower fit

  • Unique look

  • Includes anti-walk pins, port cover, and titanium grip screw

Cons:

  • Price, but lightweight always costs money

  • Slightly wider, in some places,  than standard AR lower receivers 

Score: 9.00 Amazing

Favorite Link:  Blackout Defense 

Primary Arms Classic series 1-6x24

  Primary Arms’ Classic series of optics is their budget or entry level line. But don’t stop reading just yet, this Classic series 1-6x24 still has a bunch of decent things going for it. The Classic series has good visual clarity as well as an illuminated dot in the center of the reticle. So let’s dive deeper into what the Classic 1-6x24 has to offer.

  Since the Primary Arms Classic 1-6 is an entry level scope, it uses a second focal plane reticle. For anyone that doesn’t know, this means that the reticle stays the same size throughout the 1-6 power magnification range. Since the Classic 1-6 uses a duplex dot style reticle, this doesn’t really affect much. You probably won’t be trying to range target distances with it. Something that amazed me on the Classic 1-6 was the optic clarity. For an entry level scope, everything was real clear, even at 6 power. I’ve seen entry level stuff that isn’t near this clear.

  The little Classic 1-6 has some other notable features. For one, it uses a 30mm tube that helps let light through the optic, plus it’s pretty much the industry standard for low power variable optics. The adjustment turrets are capped. This helps to keep your adjustments from getting changed. These caps are decently knurled to make them easy to take on and off. However, the windage and elevation adjustment turrets don’t have any marks to line up the turret with the body of the scope. So if you want to go 4 clicks, there’s no indication that you went there. Primary Arms does put a moveable “zero” piece on top of the turret, but without a mark on the scope body, it’s useless. I’d put a tiny dot of paint on it for location purposes. Even though there’s no visual reference on zero, the actual clicks on this Classic series are great. So it’s easy to count how many clicks you moved the turret. Each click is 0.5 MOA, so approximately ½” at 100 yds. There’s also a full 120 MOA of adjustment in the scope. Last on this feature list is the nice throw lever. It sticks up high enough to easily adjust the magnification, but it’s not super tall either. If you don’t like throw levers, it is simple to remove and then you are left with a standard style adjustment ring.

  One of my favorite aspects of the Classic 1-6 is its reticle. The reticle is a duplex dot style (see picture). The 3 heavy duplex lines draw your eye to the center of the reticle. Then in the center are some fine lines that point to a center dot. The center dot measures 2 MOA. This center dot has red illumination, if you want it to. The illumination has 10 settings. These pretty much go from barely visible to pretty bright. I say pretty bright, because in bright sunlight the dot illumination isn’t visible. But it’s a $200 scope and 90% of the time, you will be able to see the illumination of the center dot. This reticle works great on something like a standard AR, where the cartridge shoots pretty flat out to 300 yds. Plus, being a 1-6 power, at 1x it’s almost like using a red dot. The reticle really impressed me.

  I mounted the Classic 1-6x24 on a standard 16” AR in 5.56. I will say it works well for close targets. Even at 3-5 yds it performed respectfully. Moving out to 200 yds and jumping the magnification up to 6x, the Classic 1-6 still worked well. Targets were clear, but getting in the right eyebox window was a little challenging. With this Classic 1-6, you really need to have your eye in that sweet spot of the eye relief. This was the scopes biggest downfall for me. I also had to remind myself that it is an entry level LPVO. Especially since the glass was so much better than I expected. So much so, that it was easy for me to hit, and see, 4” plates at 200 yds, while using the Classic 1-6.

  If you are looking into trying out a LPVO, or just want a budget one, the Primary Arms Classic 1-6x24 is a great place to start. Its reticle is simple to use and it has great optic clarity for something in this price range. I'd say, for the price, you'd be hard pressed to find something as good. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Budget friendly 1-6 power optic

Target Market:

Those wanting a quality budget scope

FNBs (Features & Benefits of this product):

  • 1-6x Magnification range

  • Illuminated Duplex Dot reticle, Dot is 2 MOA

  • Second focal plane design

  • Fast focus eyepiece

  • Fogproof, dustproof, and IP67 rated waterproof

  • 6063 Aluminum body with matte black anodized finish

  • Integrated magnification lever

  • Uses 1 - CR2032 battery (included)

  • Includes lens covers

  • Click Value - 1/2 MOA

  • Eye ReliefLow: 3.5in. / High: 3.9in.

  • Field of View at 100yds - 1X: 113 ft. / 6X: 18.8 ft.

  • 120 MOA windage and elevation adjustments

  • Weight - 17.21 oz.

  • 30mm tube diameter

  • Lifetime Warranty

What other aesthetic options or finishes are available?

None

What others are saying?:

5/5 stars at PrimaryArms

GREAT VALUE

Don't expect top-tier performance (the highest illumination is not daylight bright, bare-bones reticle, eye box can be tight) but a budget LPVO can't really get much better than this - Clear glass and features every functional feature (capped turrets, audible adjustments, illuminated reticle center). 100% recommended if you're in the market for a high-value optic.

Link to other reviews:

Lynx Defense   

Price point:

MSRP = $199.99

Retail = Same, but Primary Arms has sales quite often

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Simple reticle with red center dot

  • 2 MOA center dot

  • Lifetime warranty

  • Clear

  • Price

Cons:

  • Narrow eye box

  • No marks for turret adjustments

Score: 7.50 Good

Favorite Link:  Timber Creek

Strike Industries Dual Folding Adapter

  Strike Industries recently brought out their Dual Folding Adapter. It is a unique folding stock, or brace, for mounting on a picatinny rail, hence the “adapter” part of the name. From pistols to rifles, the Dual Folding Adapter (DFA) has a variety of uses. 

  The Dual Folding Adapter comes with everything needed for multiple mounting options. It comes in the box set up to be used as a pistol brace. Also in the box is a buttplate. The buttplate is to use the DFA on a rifle or registered Short Barrel Rifle (SBR). Do not put the buttplate on the DFA while it’s on a pistol. The buttplate also has a rubber buttpad attached to it. To mount the DFA to anything, you need a firearm with a rear vertical picatinny rail. Then you just slide it on the pic rail, insert the screws, and tighten it down. The stabilizer has a QD socket at the top rear, for use with a single point sling. This lets you put pressure against the sling, to help stabilize the pistol. The buttplate is pretty explanatory for a rifle. The buttplate also has 2 QD’s, one on either side, for mounting a sling. To switch between the buttplate and the stabilizer, there is a torx head screw that goes through the end of either one of them, and screws into the strut.

  Now for the best part. The Strike Industries Dual Folding Adapter folds both ways! There are 2 buttons on the top, by the picatinny rail mount. These buttons unlock the DFA so it can fold. If looking at it like you hold a pistol or rifle, push the left button down, into its recess, and the DFA  can then be folded to the right. Or, push the right button and it can be folded to the left. The DFA has a slight 3 degree downward angle, when folded. This is to help clear ejection ports, so that a rifle can still be fired with the DFA folded. To unfold the DFA, you have to push up slightly and then pivot the DFA out to lock it in the unfolded position. If you push up by the stabilizer or buttplate, nothing happens. You have to push up closer to the hinged portion, or the DFA won’t unfold. I like how this worked because you aren’t accidentally unfolding the DFA. It is also really easy and quick to unfold the DFA. Just push up a little with your thumb and you are in business. There is a small price to pay for the ability to fold both directions. That comes in the way of the picatinny rail mount and folding mechanism. The folding mechanism is 2” wide, so it is the widest part on the whole DFA. One typically mounts the DFA up by the firearms receiver, so it’s not as bad as it sounds. 

  Other than the folding point, the Dual Folding Adapter is quite slim. The strut on the DFA extends rearward from the folding mechanism, it has some lightening cuts and is only about ½” wide. The whole DFA weighs under 10 ounces, so it’s not heavy at all. Total length on the DFA is about 9.25”. In the folded position it adds, a tiny bit over, an inch to your firearm. If, for some reason, you want to take the DFA off, you can push both the buttons and slide it off of the picatinny mount. Why, I am not sure, because it folds. Strike Industries also sent me out their Cheek Riser. This is for using the DFA as a rifle stock. The cheek riser clamps on through 2 holes in the strut. It has 3 height positions. The cheek riser makes the strut much more comfortable to lay your cheek against. Plus those height adjustments let you get your eye in the right spot for your optics. I was impressed with how comfortable and useful this little piece of polymer was.

  The Dual Folding Adapter was used mainly on a Strike Modular Chassis. So it was used in the pistol stabilizer configuration. I was pleasantly surprised at how well the DFA stabilizer brace worked for me. It rested nicely against my arm and really did help stabilize the pistol. There is a tiny bit of up down movement in the whole system, but it’s less than some M4 stocks, so no complaints about stability. Speaking of stability, Strike Industries has little rubber bumpers that go inside the DFA to help with lockup and cushion the impact of that lockup. I ended up using the thickest ones provided, as they gave the best feel and tightness. I probably have opened and closed the DFA more than I should have. It’s kind of a fidget spinner for firearms. 

  If you happen to be in the market for a folding stock or brace, why not let it fold both ways. The Strike Industries Dual Folding Adapter does just that. It makes an excellent stock, as it is sturdy, and it really shines as a foldable brace. Strike Industries has really stepped up their accessory game in the last few years, The Dual Folding Adapter is definitely one to check out.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Dual Folding stock or brace

Target Market:

Those wanting a folding stock

FNBs (Features & Benefits of this product):

  • Pre Assembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)

  • Patented Picatinny dual folding adapter with intuitive unfolding system

  • Folds left or right anytime without flipping or reconfiguring hinge

  • Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length

  • Adds 1.02” (26.00mm) to overall weapon length in folded position

  • Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed

  • Pull up on bar near hinge and back for quick deployment when folded

  • 3-degree down tilt to help prevent interference with ejection port when folded to right side

  • Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs

  • Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]

  • Rubber anti-slip buttpad [Stock]

  • Steel hinge with 6061-T6 Aluminum base, adapter & strut

  • Lightweight at under 10 ounces

  • Modular system with interchangeable parts sold separately

What other aesthetic options or finishes are available?

None

What others are saying?:

Nothing found

Link to other reviews:

The Firearm Blog  

Price point:

MSRP = $219.95

Cheek Riser = $31.95

Retail = $199.95 at Brownells   

I need it now! Availability:

Strike Industries or Brownells

Our Rating: 

Pros:

  • Folds both ways

  • Switchable between rifle and pistol options

  • Easily deployed

  • QD points

  • Lightweight

Cons:

  • Wide picatinny rail folding mount

Score: 8.00 Great

Favorite Link:  JSD Supply

XS Sights DIY sight pusher

 I have always needed a sight pusher to install handgun iron sights. The old brass punch and hammer system was getting old. When XS Sights told me they were coming out with some sight pushers, I was all in. XS came out with two different styles, both for Glock style pistol slides. They are the “DIY” and the “Gunsmith” version. The DIY sight pusher is what I received. It’s a no frills sight pusher, but gets the job done with ease.

  XS DIY sight pusher is a convenient way to install Glock sights. It also works to remove the old ones. The DIY sight pusher isn’t very large at all, it fit’s on a workbench or table top with ease. It’s under 6” long and 2” wide. The size makes it super convenient for throwing in your range bag. That way if you need to adjust your sight at the range, it’s really easy to do so. The pusher tool has a screw on the end which is used to push on a brass piece using the provided allen wrench. This brass piece is what pushes the sight in. Then there is an open channel where your pistol slide fits. Also included is a plastic wedge to hold the slide up tight against the tool. A Glock style front sight tool is also included. 

  A cool thing about these XS sight pushers is that you can also get them in a kit. The XS kit includes the sight pusher and a set of XS R3D night sights. This is actually the kit they sent out. The R3D’s are not a tall sight, so they are not for use with red dots or suppressors. So I rounded up a normal slide and went to work installing them. The R3D front sight has an orange ring around a tritium insert. The rear is blacked out with just 2 tritium dots on both sides of the notch. This gives you a 3 dot sight picture in low light and a very fast regular sight picture under normal conditions. I can’t say enough good things about the XS tritium sights.

  I was really impressed with how the DIY sight pusher worked. I took my slide, set it up against the pusher surface. Lining up the sight with the center of the brass pusher piece. I slid in the plastic wedge until it was snug. Then took the allen wrench and started turning the screw. Put some oil on the screw threads before each use so it won’t bind up. The old sight pushed out with ease. So I backed the screw back out and removed the slide. I then took the new R3D rear sight, pushed it into the dovetail, by hand, as far as it would go. Then re-installed the slide in the pusher as before. Turned the screw and watched the new sight push in with ease. Once the sight was visually centered, I stopped. To tell if the sight is in the center of the slide, just turn the slide around in the tool and look at the reference marks. They are on the brass pusher, as well as the frame of the pusher itself. Once the same marks line up, with the slide in the tool on both sides, you know the sight is centered. The DIY pusher also works with an optic mounted on your slide. The only difference is that you have to use the edge of the brass pusher instead of the center. 

  The XS DIY sight pusher has really good instructions. They are included as a hard copy, but are also available online. I like the hard copy because I can reference it, if needed, on my workbench, without having to pick up my phone. Being that the DIY sight pusher is an open top design, it also makes it much easier to see what is actually going on with the sight install. On a side note. Even though it is for Glock style sights and slides, I did find it to work on my Sig P320 rear sight. So it may or may not work on other handgun manufacturer slides.

  XS Sights did a pretty good job with the DIY sight pusher. I don’t think I will probably wear it out in my lifetime. If you change a lot of sights, it’s worth the money. If you change even more sights, look into the Gunsmith version for only a few bucks more. The DIY sight pusher made easy quick work out of changing sights. Go take a look at the DIY pusher over at XS Sights.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Do It Yourself sight pusher for Glock style slides

Target Market:

Those who frequently change sights

FNBs (Features & Benefits of this product):

  • Tool Life Span: 50 – 100 Installations

  • Kit includes semi-professional sight pusher and steel Glock front sight tool

  • Fits all Glock OEM and Aftermarket slides

  • Glock MOS Compatible – Install sights with optic mounted on pistol

  • Non-marring brass bit prevents scratching sights or slides

  • Built-in Centering Scale – 1/16” scale

  • Bolt Thread Pitch: 1/16” – 1.5 Bolt rotations equals 1/16” of travel

  • Weight: 1.4 lbs.

  • Sight Tool Dimensions (LxWxH): 5.5" x 1.75" x 1.5"

  • Designed and Manufactured in Fort Worth, TX

What other aesthetic options or finishes are available?

Gunsmith version

What others are saying?:

Nothing found

Link to other reviews:

Shoot On 

Price point:

MSRP = $150.00 

     Bundle with XS sights = $254.99

Retail = $150.00

I need it now! Availability:

XS Sights

Our Rating:

Pros:

  • Super easy to use

  • Can get as a kit with sights

  • Size makes it useful anywhere

Cons:

  • Price if only doing one or two installs

  • Only for use on Glock style slides

Score: 7.50 Good

Favorite Link:  Kaiser US 

,

Primary Arms SLx 4-16x44 FFP

,

  Recently Primary Arms updated the SLx 4-16x44. This update gave the feature rich, SLx 4-16 some new reticles. One of those is the ARC-2 MOA, a simple, yet effective, illuminated reticle. I was excited to put this optic through its paces and it did not disappoint. Primary Arms’ SLx line is what I like to call performance packed optics at a price everyone can afford.

  To put it simply, the SLx 4-16x44 FFP has magnification of 4x to 16x. It has a 44mm objective lens and a 30mm tube to help gather as much light as possible. Magnification is adjusted with a ring back by the eyepiece. The ring has a raised “fin” that can be removed if you don’t like it. It has a side parallax adjustment that goes from 20 yds to infinity. On the end, of said parallax adjustment, is the illumination ring. It has 11 values to illuminate the ARC-2 reticle. The lowest 2 settings are night vision compatible. The highest setting is “daylight” bright. I can actually see a little bit of red illumination in bright sunlight, something I can’t always say when things are “daylight bright”. The adjustment turrets on the SLx are of the tactical style. They are not capped, nor can they be. They have a pretty good tactile feel for the 1/4 MOA clicks, but are not very audible, if at all. These turrets are resettable to zero with the supplied allen wrench. No zero stop, but I can’t knock a $300 scope for that.

  Now that you have a general rundown of the optic, it’s time for more. I’ll start with the glass. For this being in the SLx line, the glass clarity is great, even at full 16x magnification. I could make out a wire fence at around 500 yds, see picture. The fast focus eyepiece gets the reticle super clear and the parallax adjustment gets the image spot on at all different ranges. I really am amazed at how clear the glass is for a $300 scope. The only real downfall of looking through the optic is its eye relief. Primary Arms specs the eye relief at 3.6 - 3.9”. So you really have to be in that 0.3” range to get a good eye box picture. Especially at those higher magnifications. I’m not using this on fast moving targets, so it doesn’t bother me much.

  The Primary Arms 4-16x44 FFP has a few different reticle options. Some are their ACSS style, but I’ll be focusing on the ARC-2 reticle of this particular scope. I chose the ARC-2 MOA reticle because it is not cluttered up with stuff, like so many “christmas tree reticles” are. First off, the reticle is in minutes of angle, which is what I prefer. Second, it’s a first focal plane (FFP) reticle. So all the subdivisions, or hash marks, stay the same size throughout the magnification range. The reticle grows as you increase the magnification. This is so those marks in the reticle stay the same, and are usable for windage and elevation holdovers, at any magnification. On that note, Primary Arms did a nice job with this reticle. Almost all of the MOA marks are visible when at 16x. I’ve seen FFP optics that, a big portion of, the reticle disappears when at full magnification. The reticle itself is essentially just a crosshair with little marks spaced every 2 MOA apart. Every 10 MOA, there is a larger mark and a number, at least on the elevation portion of the reticle. Windage is a little different, with 2 MOA marks for the first 10 MOA, and then marks every 5 MOA past that. See the reticle picture for values. This reticle is very clean. It’s kind of old school mil-dot meets new school technology. Did I mention that the grid portion of the reticle is illuminated? Well it is, in red, with 11 brightness settings. I really like the style of simple and useful reticles like the ARC-2.

  The ARC-2 is such a great reticle, but adjusting your scope is still very important. That brings us to the target style turrets on the 4-16x44. If you are into dialing your scope for windage and elevation adjustments, you want good target turrets. I found these to be repeatable, at least in my testing. If I dialed up 15 MOA, and then back down 15 MOA, it shot where I expected it to. I didn’t do a tracking test, But this isn’t a $1000+ scope, so I didn’t see any need for me to do that. The clicks on the turrets feel really good but you can’t really hear them. I prefer feel over hearing them anyway. They also have a little resistance to them, which is nice, so they don’t move if you bump them in the field. Each turret adjusts in 0.25 MOA/click and 15 MOA per 1 revolution of the turret. It has over 85 MOA of total adjustment, or about 6 full turns of the turret. L/R and UP are marked next to or under the turret, depending on which one it is. There is also a little mark to use for setting zero. The SLx 4-16 has the ability to set the turret dials to zero, after you have sighted it in. There’s 3 tiny set screws at the turret's top, loosen them and rotate the knob to zero. Tighten them back up and your zero is now set. 

  I have the Primary Arms SLx 4-16x44 mounted on a “varmint style” AR. The scope weighs in at 25 ounces. But in this case, it is the perfect scope for this particular rifle. The SLx has performed super well for me. It’s super clear for a scope in this price range. It’s easily adjusted, if needed. It has an illuminated reticle for low light use. A parallax adjustment that goes super low, so if I wanted to use it on something like a .22lr, I could. I wouldn’t hesitate to take this hunting in the brush. I think it would make an excellent hunting scope as the ARC-2 reticle doesn’t take up a lot of room in the scope. The magnification range is also great for this AR’s use case.

  If you're in the market for a feature rich FFP optic, the Primary Arms SLx 4-16x44 ARC-2 might be it. I just can’t get over all the options you get in this optic, and at an incredible price. It performed better than my expectations for sure. The updated SLx scopes from Primary Arms are definitely worth checking out.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality low priced FFP optic

Target Market:

Those wanting excellent quality in a mid range optic, but at a reasonable price

FNBs (Features & Benefits of this product):

  • First Focal Plane ARC-2 MOA reticle

  • Partial Red Reticle Illumination, Visible in Sunlight

  • 11 brightness adjustments, including 2 that are Night Vision compatible 

  • Side Parallax adjustment

  • Click Value: 0.25 MOA

  • FOV @ 4x / 100 yd : 26.6 ft

  • FOV @ 16x / 100 yd : 6.5 ft

  • Total Windage and Elevation Adjustment: > 85 MOA

  • Zero resettable turrets  

  • Weight (with Battery, without Lens Covers): 25.4 oz

  • Tube Diameter: 30 mm

  • Eye Relief: 3.6 – 3.9 in

  • Fast Focus Eyepiece

  • Fog Resistant

  • Fully Nitrogen Purged, IP67 Waterproof Standard and Dust Proof

  • 6063 Aluminum with Anodized Matte Black

  • Flip-up Lens Covers Included

  • Uses one CR2032 Battery (Included)

  • Lifetime Warranty

What other aesthetic options or finishes are available?

Tons in the SLx line    

What others are saying?:

Nothing found as of this review

Link to other reviews:

Same - nothing found

Price point:

MSRP = $299.99

Retail = Same, but Primary Arms always has sales going on

I need it now! Availability:

Primary Arms or Amazon

Our Rating:

Pros:

  • Price

  • First Focal Plane reticle

  • Reticle options

  • Good Illumination

  • Clear field of view

Cons:

  • Non-forgiving eye box

Score: 8.50 Great

Favorite Link:  SLx 1x Prism

Primary Arms is an advertiser on the Gun & Gear Review podcast. This does not give them a better review than any other company. 

Unique ARs Handguard

  When you think of AR handguards, you typically don’t think about exotic designs. Unique ARs is here to change your mind about that. They make AR handguards with intricate designs in, and on, them. Unique ARs will also do custom designs. What makes the Unique ARs designs even better, is that they are also very functional.

  Unique ARs sent me one of their stock design handguards. The name of this particular one is the “Filigree.” A Filigree’s definition is: “An intricate, delicate, or fanciful ornamentation”. This handguard is exactly that. I like to think of it as an old school scroll pattern. It is pretty cool looking, especially when color is added to it.

  This particular handguard is 15” long and free floats the barrel. Unique ARs does make shorter versions, but I do like longer handguards. It is a tube style handguard, with the Filigree pattern milled in. There are no rails or anything else on this “original” series handguard. However, on the top and bottom, there are threaded holes to mount Unique ARs picatinny rail sections, in case you need a section of rail. Unique ARs also offers a “slim” style of handguard, it has a full length top rail, if that’s what you are looking for.

  Installation of the handguard is pretty normal. So I won’t go into it too much. One will need the normal AR tools to do it. Plus you will need a low profile gas block to fit inside the tube. The inside diameter of the handguard is 1.75” and the outside is 2”’. This particular handguard weighs in at 15.9 ounces complete with the barrel nut and mounting hardware. So it’s not heavy, but not super light either.

  When you order a standard option handguard from Unique ARs, you can also order some add ons. The add ons include semi-custom cerakote in almost any color. Either one or two different color options. The Filigree handguard was sent with a single cerakote option. So the outside of the handguard is black, and inside the scroll work is lime green, or as I like to say, zombie green. It looks really good! I actually mounted it on my Spikes Zombie Lower rifle. The cerakote work, in the Filigree, really shows off the expert ability of the cerakoter’s over at Unique ARs. There is some pretty fine detail work that goes into it.

  Now for how it actually performed. I was really surprised at how grippy the handguard was. I can get a fantastic grip on it because of all the machine work. I thought it would be smooth, but no, it’s not. Because of the texture, this handguard works really well when moving from target to target. It is almost like having built in grip panels. The little bit of extra weight seemed to make the rifle feel more stable than it was when it had a carbon fiber one on it. This handguard makes the rifle look awesome.

  If you are in the market for something different, the Unique ARs handguard is it. With all the special designs and cerakote options, you will definitely have a “unique” AR. If you want something you designed, or just something not in their catalog, you can have it made by them. If you are building that true custom rifle, their handguard will make it “one of a kind”. As an added bonus, it actually will make the rifle perform better. Go check out Unique ARs, but I’ll warn you, it’ll probably end up costing you a few bucks.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Custom AR handguards

Target Market:

Those wanting a unique look to their AR

FNBs (Features & Benefits of this product):

  • Filigree Scroll pattern

  • 15” Free-float handguard

  • Made from 6061 T6 Aluminum

  • Inside diameter 1.75″

  • Exterior diameter 2″

  • Compatible with any mil spec AR-15 upper receiver or (DPMS Gen 1 Style) AR-10 upper

  • Mount accessories with Unique-ARs proprietary picatinny rail only

  • Weighs 15.9 ounces complete with barrel nut and hardware

  • Available in 9″, 12″, and 15″ lengths.

  • Custom cerakote available

What other aesthetic options or finishes are available?

Too many to list

What others are saying?:

When I decided to build my first AR, I decided that it had to be different and not a typical build that I could just go grab off the shelf. I came across the Unique-ARs Freedom handguard and thought, “I have to have that on my build!”

When it came time to order I discovered that I could choose colors! But not just one color, two colors! After a bit of time sorting through the hundreds of colors, I found a color that would match my build perfectly. I placed the order and it arrived a week earlier than expected. It is the perfect finishing piece and definitely an eye catcher! Thanks a ton!

Joshua M. at Unique AR’s

Link to other reviews:

Gear-Report  

Price point:

MSRP = $285.00

Start at $185.00

Retail = $285 plus cerakote

I need it now! Availability:

Unique ARs

Our Rating:

Pros:

  • Awesome designs

  • Fully Custom handguards available

  • Cut out patterns give a very good grip

  • Custom Cerakote colors

Cons:

  • Must use Unique’s picatinny rails if wanting a mounting platform

  • A little heavier than some other handguards

Score: 8.00 Great

Favorite Link:  Walker Defense Research 

Viridian RFX 35

  Viridian Weapon Tech recently came out with a few pistol mounted green dots. Keeping in Viridian fashion, they only do green, hence the green dot and not a red. All of their green dots have the same features, they just are different sizes with different mounting footprints. They sent out the RFX 35 for me to try out, It uses the RMR footprint and has a huge viewing window.

  In the current pistol mounted dot sight market, there are a bunch of important features the sights should have. The RFX 35 has most of these. First, it has an industry standard footprint, a RMR in the 35’s case. Next, I feel it should have some auto on feature. Viridian’s RFX 35 checks this box as it has their “instant-on” technology. What this does for you is turn the green dot on, when any slight movement is detected. The RFX 35 turns off and into this mode after approximately 2 minutes of being stationary. The last option I think these small dot sights should have, is night vision compatibility. I don’t use this feature, but I feel it is worth having. The RFX’s lowest 2 settings are NV compatible. 

  One of my favorite things about the RFX 35 green dot is its window size. The viewing window is quite large, measuring in at 22x26 mm. This is essentially a 1 mm shorter, and 1 mm wider than its commonly known competitor, the SRO. The window is also very rounded in shape, with a flat spot near the bottom. This means that no matter what you are doing, the green dot in the RFX is super easy to pick up. It also makes transitioning from target to target faster since the target comes into the viewing window sooner. I found it extremely fast to use on my Sig P320.  

  As previously mentioned, the RFX 35 uses a green dot. Viridian uses a 3 MOA dot size for the RFX. I thought the dot size was very useful. Not too large to cover up close targets, but small enough to be used, when accuracy is needed, on those 50 yard targets. Most people tend to see the green dot better than a red one. For me, I get less of that “bloom” effect with green, that is due to my astigmatism. The RFX 35 uses a “+” and “-” to adjust brightness. The “+” is on the left side, and the “-” is on the right side. I like this layout as you don’t accidentally push the wrong button. There are 10 total brightness adjustments, 8 are daylight and the other 2 are NV. The green dot is easily visible in bright sunlight on the highest setting. To adjust the green dot for windage and elevation, there is a supplied allen wrench. It adjusts in 1 MOA “clicks”, except it doesn’t have clicks, just the turn screws. This doesn’t hurt the functionality, I just prefer clicks to make adjustments easier for me. 

  Another advantage to the RFX 35 is its extremely low profile. This little green dot sits lower than any of the other RMR footprints sights I own. Part of the reason it sits so low in the slide, is that it has a bottom mount battery. No side or top load battery here. I prefer to not have a bottom load battery, as I don’t like to remove things to change batteries. Is this a deal breaker? No, it’s just a slight inconvenience every couple of years when it needs to be changed. With a 30,000 hr battery life, it’s not like you have to change it all the time. 

  In the end, I am really liking the Viridian RFX 35. The green dot is crystal clear and is easily picked up with my eye. The window's viewing size is fantastic. Plus, it has that industry standard mounting footprint. The RFX 35 has been a really good sight for me. If you are looking at a large window reflex sight to mount on a handgun slide, or possibly a rifle, the Viridian RFX 35 may just be the ticket. Check it out, along with the other RFX series sights, at Veridian’s website.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Large window green dot sight for RMR footprint pistols

Target Market:

Carry, Competition, Training, and anything else

FNBs (Features & Benefits of this product):

  • 3 MOA Green Dot

  • 22x26 mm viewing window

  • RMR Mounting Footprint

  • Picatinny mount included

  • Auto shut off and INSTANT- ON technology

  • 30,000 + hours battery life at brightness level 5

  • 6061-T6 aluminum body

  • Designed from the ground up to ensure clarity, solid function, and rapid target acquisition

  • Designed to fit full size handguns, shotguns, and rifles

  • 8 Visible & 2 Night Vision Brightness Settings

  • WEIGHT: 1.0 oz

  • WARRANTY: 7 years

  • AUTO OFF: 2 minutes

What other aesthetic options or finishes are available?

Other RFX series

What others are saying?:

4/5 stars on Amazon

Pretty nice if you get it on sale

500 rounds through my pistol with this dot and it went from being a safe toy to my EDC. I got the 35 and it turned my pistol into an entire new machine. Easier to sight in than my holosun, and over $100 less. Will be getting the 15 for my smaller pistol and ditching the holosun 507k I have on it. The green dot is super easy to see. Honestly surprised how much better I like it over my holosun.

Was honestly surprised by the dot. I expected it to be crap after seeing the glass fell out of both the reviews I watched. Ended up being a great purchase. My only gripes are the fact it has to be removed to replace the battery and that it's kind of difficult to remove the wrench used to adjust. Would be so much better if they used the same style screws as pretty much every other big-name dot to adjust. I never have an allen wrench on me, but I always have some kind of small device that can be used as a flat head.

Link to other reviews:

Terribly Tactical Youtube 

Shooting Sports USA  

Price point:

MSRP = $289.00

Retail = $202.95 on Amazon

I need it now! Availability:

Viridian or Amazon

Our Rating:

Pros:

  • Large window size

  • RMR pattern footprint

  • Clear dot

  • 3 MOA dot size

Cons:

  • Bottom load battery

  • No click adjustments

Score: 8.50 Great

Favorite Link:  Midwest Firearm Solutions

Primary Arms Classic Mini & Micro red dots

  Primary Arms has come out with a couple of new reflex sights. Both of these are from their value priced “Classic” line of optics. The two new red dots are the Classic Mini and Classic Micro. Both have 3 MOA dot sizes and are on common mounting footprints, making it easy to mount on various pistol slides.

  I’m putting the Micro and Mini together since they both function the same way. These reflex sights are your common “open” style. The main difference is size, weight, and mounting footprint. But as far as function, they are very similar. To turn them on, just push the brightness up button, marked with a plus sign. For off, just hold down the brightness down button for a few seconds, the one marked with a minus sign. If you forget to turn the sights off, they will automatically turn off after 12 hours of use. If you push a button anytime in that window of time, the sight resets the 12 hours. These two red dots both have 10 brightness settings. From sunny daylight bright down to midnight dark. You really can see and use all 10 of the brightness settings, if that’s what you want. The Mini’s up/down buttons are located on the left side of the reflex sight. The Micro has the up button on the left side and the down button on the right side. This is because the Micro is quite a bit smaller than the Mini.

Classic series MICRO

Classic series MINI

  When it comes to small red dot sights, people seem to want to know about battery life. I would tend to say that this is because everyone hates changing batteries. On the Primary Arms Classic Mini and Micro, the CR2032 battery is located on the bottom of the mounting surface. So battery life is more important because the sight must be taken off to change it. I’m not keen on the bottom mount battery, but since the battery lasts approximately 40,000 hours on brightness setting 5, I’m okay with it. 

Mini 3 MOA dot

Micro 3 MOA dot

  The 3 MOA dot size is a good option for the Micro and Mini. I like the precision that a 3 MOA dot allows. Yet it isn't too small to see on a handgun. I pick up the dot pretty quick with these reflex sights. Surprisingly, the dot on the squarer window of the Micro is easier for me to pick up, even though it is smaller. Don’t get me wrong, the red dot on the Mini’s more rounded window is still easy for me to pick up, but the window size is also noticeably larger. These reflex sights use fully multi-coated lenses to help make that red dot as bright and clear as can be. You do notice a very, very slight tint to them, but it doesn’t distract from seeing your target or the dot. To sight in the dot, they both have 1 MOA adjustment screws at the back and right side of the sights. They use a small allen wrench to adjust them, but they are not click adjustable. 

  The Classic series Mini is mainly for standard size pistols. It uses a RMR footprint to mount the red dot to a slide, or possibly a picatinny riser. The width is about 1.2 inches, when measured to the outside of the buttons, so it fits nicely on most compact and full size pistols. I really like how Primary Arms designed this for the RMR footprint, as it is one of the industry standards. So finding a slide or pistol to mount the Mini on is super easy. The Mini also has a decent sized window, at 24x17mm. This window is also slightly curved at the top to give you a better view of the red dot. This larger window also makes it easier to find the dot, so to speak. Being the larger of the two red dots, the Mini still comes in with a weight of 0.97 ounces.

Mini size compared to a penny, Micro is smaller yet

  Now onto the Classic series Micro. This is the smaller version mainly for use on sub-compact and micro pistols. It measures 1 inch at the buttons, but is actually a little slimmer in real life. Primary Arms uses the RMSc industry standard footprint for the Micro. Using the RMSc footprint is by far the best choice for this red dot. The window size comes in at 21x15mm. Even though the window isn’t very large, the squarer viewing window is easier for me to pick up. I mounted it on a glockish 43 and it looks right at home. The Micro is pretty much half the weight of its larger brother, coming in at 0.56 ounces. The height profile of the Micro also allowed me to use standard height backup sights. It does cut the sight’s viewing angle off some, but they still can be seen fine. So you may not have to purchase new iron sights with the Micro, a definite plus in my book.

  Both the Primary Arms Classic Mini and Micro red dots work great. They both handled recoil fine and I didn’t break them. I would recommend these to anyone looking for a cost effective red dot for range, competition, or just “fun” use. With no way to leave them on continuously, carry use is out for me. Look into the Primary Arms RS-10 if you need something for carry or home defense, as it will always be on. For what they are, the Mini and Micro are both great budget friendly options for a reflex style red dot.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Value packed reflex red dot sight

Target Market:

Anyone wanting a feature packed, low cost reflex style red dot

FNBs (Features & Benefits of this product):

Both:

  • 3 MOA Red dot

  • Includes CR2032 battery

  • Up to 40k hour battery life on medium setting

  • 10 Brightness settings

  • Compact and lightweight design

  • Fully multicoated lens

  • 1 MOA adjustments

  • 6061-T6 aluminum housing

  • Bottom mounted battery

Mini:

  • Fits RMR footprint

  • Large 24x17mm Lens

  • Weight - 0.97 ounces

Micro:

  • Fits RMSc footprint

  • Compact 21x15mm lens

  • Optimized for micro-compact pistols

  • Weight - 0.56 ounces

What other aesthetic options or finishes are available?

None

What others are saying?:

???

Link to other reviews:

Lynx Defense - PA Micro and PA Mini

Price point:

MSRP = $149.99

Retail = Same

I need it now! Availability:

Primary Arms or Amazon

Micro

Mini

Our Rating:

Pros:

  • Bright dot

  • Price

  • Lifetime Warranty

  • Fits common mounting footprints

Cons:

  • Turns off after 12 hours

  • Bottom load battery

Score: 7.50 Good

Favorite Link:  Kaiser US

Timber Creek 30mm scope mount

  If you know anything about Timber Creek Outdoors, it’s that they make bright anodized and cerakoted AR parts. They happen to have a new 30mm cantilever scope mount. This mount is part of their “Enforcer” line of AR parts. Because of this, it comes in all of Timber Creek's colors.

  The Enforcer Cantilever Scope mount is a top quality scope mounting platform. It is made from 6061 aluminum. This gives the mount plenty of strength while still being lightweight. It weighs in at 6.56 ounces on my scale. This is quite a bit lighter than a lot of mounts in this category. Yes, it is for use with 30mm scopes, so you have plenty of options in the optics arena. There are 4 clamping screws to clamp it to your picatinny rail. These screws also act as the recoil lugs for this mount, making it extremely rigid to the mounting rail. Timber Creek also uses Torx head screws throughout, so no stripping the heads out on this mount.

  I opted for the Tungsten Grey cerakote finish on the Cantilever scope mount. As mentioned, the mount comes in Timber Creek’s assortment of colors. Some are anodized and some are cerakoted. From previous experience, I know that Timber Creek does a great job with their anodized colors. This is partly why I chose Tungsten cerakote. The cerakote on this mount is nicely done also, in fact maybe too nice. When I installed the scope, I had to sand the cerakote down inside the rings. Not all of it, just enough to smooth it down because there was some slight binding during the initial installation. The slight sanding cured it. I attribute this to the Tungsten cerakote being a slightly rough finish. Other products I’ve used with Tungsten cerakote also have this same feel to them. I suspect that smooth cerakote options, as well as the anodized ones, might not have this problem. But I really do like how the mount looks on a black AR, it adds just a hint of some color.

  Ring height on the TC Enforcer scope mount is 1.5”. Why do you care, you might ask. The 1.5” height is pretty much an industry standard. This height also gives you a proper cheek weld, on an AR rifle, with most optics. I installed a Primary Arms SLx 4-16x44 into the cantilever mount. There is plenty of room between the rail and the objective lens. I’d venture to guess that all 50mm objective lens scopes would still have plenty of clearance between the scope and the rail. Being a cantilever style mount, it also places the scope farther forward to give you proper eye relief on your favorite AR rifle.

  The Timber Creek cantilever mount won’t have any problems living on your AR rifle. But, I wouldn’t hesitate to use it on something larger. With those 4 mounting lug screws, it should handle some serious recoil. You could even mount it up on a bolt gun, if so inclined. It only comes in a standard 0 MOA base, but for most of us, that won’t make any difference. I’m pretty pleased with what Timber Creek has done with this mount. Being in the Enforcer line, means that it will match other Enforcer series parts.

  Timber Creek has done a fine job with the Enforcer Cantilever mount. It’s rugged and lightweight construction should last you eons. Having colors to match your other AR parts is a bonus too. If you are looking for a lightweight scope mount that is made in America, go check out the Cantilever mount from Timber Creek Outdoors. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight 30mm cantilever scope mount

Target Market:

Anyone who wants a lightweight scope mount, especially for AR style rifles

FNBs (Features & Benefits of this product):

  • Made from 6061 aluminum

  • 30mm ring size

  • Ring Height - 1.5”

  • Cantilever design

  • Weight - 6.56 ounces

  • 4 clamping screws also double as recoil lugs

  • Torx screws throughout

  • Made in USA

What other aesthetic options or finishes are available?

Different anodized and cerakoted colors

Price point:

MSRP = $224.99

Retail = Same

I need it now! Availability:

Timber Creek Outdoors or maybe Primary Arms

Our Rating:

Pros:

  • Lightweight

  • Rugged

  • Color options

  • Made in USA

  • Standard 1.5” height

Cons:

  • May need some fitting or sanding

  • No 34mm option as of yet

  • Price might deter some buyers

Score: 7.50 Good

Favorite Link:  Walker Defense

Throom Targets

  Everyone, by now, has heard of self healing targets. If not, let me introduce you to Throom Targets. I ran across Throom targets long before they contacted me to do a review. I was super interested in how these target systems would work. Every target system, Throom offers, is made of their “shoot-throo” self sealing polymer. This even includes the stands that hold some of their targets. Throom targets are a nice addition to anyone's range time.

  Throom targets went above and beyond with the samples they sent. First off, they sent a 6” round “Knockdown” series plate rack. It’s everything needed for a plate rack, minus a couple of 2x4’s. Throom also sent a set, 6 in this case, of their 6” round “Hangtuff” targets. 

  You might ask why anyone would want these style of targets? First off, the “shoot-throo” ability makes a safer target, then say, a steel plate. There isn’t any spall or splashback from the Throom targets, the bullet just passes right through. Another feature is that Throom targets “self seal”, or the bullet literally just pokes a very tiny hole in the target. This makes them last for plenty of shooting, at least 1000 hits each, and probably a lot more. Another advantage over steel plates is the weight. The Throom targets are so much lighter. A single person can carry a fully assembled plate rack around without much problem. I know, I’ve done it. 

  Let’s start with the Knockdown plate rack. As one can guess, it is your standard 6” plate rack with 6 plates. Some assembly is required, as are a couple of 2x4’s. Since this is the “plate rack kit”, it comes with the “Alpha” brackets to assemble the stand. The Alpha brackets hold the 2x4’s to make the A-frame legs and the 2x4 that holds the plates. They are the same “shoot-throo” polymer as the plates. The 2x4’s just slide in and out of these, which makes for easy setup and teardown. It also makes the plate rack easier to throw in your car. Throom includes instructions, as well as spacing for the knockdown plates. 

  As in the name, the “Knockdown” plate rack is just that, using plates that fall when hit. The bullet passes through them while still knocking them over. So no risk of ricochet or splashback. These are 6” plates made of Throom’s shoot-throo polymer. There are 6 of them on the plate rack, and the instructions have you space them at the proper width apart. With the plate, there is a need for some sort of base to hold it on to the 2x4. Throom bases are made of the same polymer as the targets. This also means that they are just as safe as the target. If you shoot the base, the bullet also just passes through it. Yes, I’ve shot the bases plenty of times without any ill effects. The bases are held on with 2 wood screws. It is possible to shoot the screws and have the target fall off. This happened the first time I used them. I just put some new screws in them and they are fine. Since these bases are for the “Knockdown: targets, they also have an adjustment screw on the front of the base. This lets you adjust how much force it takes to knock the target over. Screw it out and angle it forward for heavier rounds, or screw it in, and straighter up, for rimfires. Yes, these screws are also made of the shoot-throo polymer! The Throom plate rack is an amazing piece of range gear. Every time I shoot the plates they fall, just like they should. Throom also makes the Knockdown plates, with holes in them, so that you can install a string to reset them, without having to go downrange. I just went downrange, but the option is there. Another option is to assemble the plate rack upside down. This makes it a reaction plate, because now the plate moves when shot, but resets itself. One of my favorite things, about the plate rack, is that it is easy to move and transport. The plate rack is like shooting steel, but safer and still gives the shooter instant feedback.

  Now for the 6” “Hangtuff” targets. These are a round target with a strap for attaching them to “something”. I say “something” because they come with 2 mounting screws that you just screw through the strap to hold them in place. The strap is about 7”’s long and 1” wide, so the target hangs about 6”’s below where you mount it. Yes, these targets “hang down” from whatever they are mounted to. When you shoot these things, they move backwards, shake sideways, or just move in different ways depending on where they are hit. I mounted 5 of these on the plate rack, in between the plates. Since they hang down, they aren’t in the way of the plates. This worked out really well. Once the plates were knocked down, you could shoot the “Hangtuff” plates until you wanted to reset the plate rack. I also marked one of these with a Sharpie. The Sharpie writes great on these Throom targets and can mostly be erased with acetone. Being able to write on the targets makes them viable for training. Mark them 1-6, A-F, etc. Call out a combo someone has to shoot, you get the idea. So yes, they make a great training aid also. 

  Nothing comes without flaws, even the Throom targets. Well, Throom actually tells you the flaws on their website, so can we consider them flaws? Here's what Throom says about shooting the targets with different velocities and at different ranges:

Over 1,250 fps: shoot THROOM Targets at 75 yards or farther away; shooting closer will result in targets not reacting.

Between 750 fps and 1,250 fps: shoot THROOM Targets from 5 yards to 75 yards away.

Under 750 fps: do not use THROOM Targets with bullets traveling below 750 fps. Also, do not use THROOM Targets with pellet guns or BB guns as the pellets or BBs may bounce back.

I don’t actually consider them flaws, more of what to know. I did definitely notice that when shooting an AR, at 15 yds,, the targets literally didn’t even move when being shot with 223/556. But shoot them with handguns or 22lr’s at close ranges and they move like crazy. Or you can move the target out to 100 yds for the rifles. I also “yeeted” a Hangtuff target off the hanger by shooting it at 3 yds with 12 gauge 00 Buck. The strap broke where the screws went in, other than that, it didn’t hurt the target surface itself. I remounted it, it just hangs a little higher than the rest. I’m pretty sure no one recommends what I did. 

  Did I mention that the Throom targets are Lime Green colored? Why lime green? I have no idea, but they are easy to see, that’s for sure. I’ve even shot them with a green dot sight. Yes red shows up better, but the green was no problem either. I really like the polymer that Throom uses. It seems to be softer or more pliable than other brands I’ve used. So far, they are holding up great, even to full auto 22 LR. 

  If you are in the market for some super cool self healing targets, you need to do yourself a favor and check out what Throom Targets has to offer. I was impressed with them. The Knockdown plate rack is great. The Hangtuff series has great utility. Plus, they are all made from a self sealing polymer that performs better than I expected. In my opinion, the Throom targets are worth paying the money for.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Ricochet free self healing targets

Target Market:

Anyone wanting self healing reactionary targets

FNBs (Features & Benefits of this product):

  • Self Healing

  • Ricochet free

  • Splatter free

  • Reactive - either movement or knock down

  • -40F to 120F temperature use

  • Lightweight

What other aesthetic options or finishes are available?

Lots of different styles, see Throomtargets.com

What others are saying?:

5/5 stars at Throom Targets

These really are amazing targets. I have had these for awhile now, and really wanted a great alternative to steel targets. I love the throom adjustable bolt that goes into the base of the target. This allows you to adjust how sensitive the target is to falling down. With the bolt adjusted almost all the way out I was able to get these to fall down with 556/223 ammo at 30-50 yards which is awesome. When flipped upside down these will react and reset with most handgun ammo and any slower rifle ammo such as 300 blackout. Will definitely be purchasing more targets.

Link to other reviews:

The Firearm Blog 

Price point:

MSRP = $3.99 and up

As tested = 6” Hangtuff set = $169.99

    6” Knockdown plate rack = $349.99 

Retail = Same

I need it now! Availability:

Throom Targets

Our Rating:

Pros:

  • Self healing / shoot through

  • Can be written on with a sharpie for training

  • 1000+ hits until needing replaced

Cons:

  • No movement at closer ranges with bullet velocities above 1250 fps

  • Price

Score: 8.00 Great

Favorite Link: Rough Cut Holsters  

Cold War Concealment OWB Holster

THE MIGHTY TITAN

  Ladies and gentlemen, what we have here is a holster, a holster that I fell in love with as soon as I opened that package. I was contacted by Clif over at Cold War Concealment to see if I would be interested in reviewing one of his holsters. I thought why not, I am a sucker for a free holster. I am just like any gun guy out there and have a box, drawer and tote full of holsters that all were the latest and greatest at the time. But just keep reading it gets better.

  I told Clif to send me one for my Sig P 365 in an OWB configuration, he said no problem. In a couple days he contacted me and said here is your tracking number and it was on the way. I started really looking at the holsters he had on his website and he really focuses on the popular Glock, S&W, Springfield, Sig, Taurus, Ruger and smaller Walther models. This is something I found impressive. For some of these models it is hard to get a good quality holster for a, let's say, lower priced firearm. They offer holsters for IWB, OWB, semi autos and a wide array of the popular J frame revolvers. 

  The owner of the company is retired from the Airforce and is located in North Carolina. The process that is used to make the holster is a taco style, that is vacuum formed over a CNC mold that is cut for your particular firearm. It is then heated and formed together to complete the taco shape. All of the edges are nicely radius to reduce snag and pinch point. The sight channel is large to run suppressor height sights. It has a single adjustment/tension screw below the trigger guard that really makes adjustments and personal tension a snap. The belt loop that came with the holster has numerous adjustment angles and has two slots on each side to fit belts from 1.5” to 2”. I wear a 1.75” belt and it works out great. The OWB holsters are also available with the Safariland QLS fork mounting system. 

  The day I got the holster I made an IG post that I was going to go ride horses with my new holster. Well I was riding right up until the time I was bucked off, hung up in the stirrups and dragged down the gravel driveway. But hey I wasn't “KILT IN THE STREETZ". Anyway when I gathered myself up, wiped the blood from my face, found my glasses, straightened my cowboy hat back up, the gun was still retained in the holster. The holster had some wear, scratches but it was still in great shape. A few weeks later I took the holster with me on a bear/hog hunt and carried it while climbing up the side of the mountains. After coming out of the briars and laurel bushes the pistol was still retained. I also did some drills at the house on my range in the backyard, the holster sits just perfectly right in front of the hip bone. The mounting system keeps it close to the body, but not to close where my love handles get in the way. I was able to draw and reholster without any issues. 

  In closing we all have had holsters that we rave about, wear for a bit and then find another one and put that one aside and forget about it. Some we get, have so many attachments on them, you need to be an engineer just to figure it out. I am a K.I.S.S method person, keep it simple stupid. If you are in the market for a holster that is comfortable, reliable, no frills, top quality, family/veteran owned, this is the holster for you. I want to make one point, yes i got this holster for free, this did not sway my decision for writing this article. I write about how things work for me. I am placing an order for an IWB and mag holder this week. I believe in supporting small businesses that make great products, this is the American way. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

American made

Great construction

Reliable

Horse approved

Durable

Ease of care

Adjustable cant

Target Market:

Anyone needing a holster for a compact semi auto or revolver

CCW  use

Americans

FNBs (Features & Benefits of this product):

  • American made

  • Adjustable cant

  • Ease of use

  • Great quality

What other aesthetic options or finishes are available?

Different patterns and colors available

IWB

OWB

Claw

No claw

Optic cut

Link to other reviews:

https://www.youtube.com/watch?v=_4ikF2FT5YU

Price point:

MSRP = $50.00

Retail = Same

I need it now! Availability:

Cold War Concealment

They have them available on their website.

Our Rating:

Pros:

  • Simple

  • Comfortable

  • Rides great

  • Retains the firearm

  • Can get with QLS Fork

Cons:

  • Maybe a tek-lok mounting option

Score: 9.50 Amazing

Stevens M320 Security/Tactical 12ga Pump shotgun

To Be Chinese, It Has a Nice Rack

  I have been holding off on this review for several years now for numerous reasons. First this is a budget shotgun and it falls in the same category as a lot of other shotguns on the market. Second, I was afraid no one would be interested in reading it. Then third there was the big C that has been affecting everyone. But here it is and let me dive into the model I have. 

  The Stevens/Savage M320 Pump shotgun, ok what can I say, it is based on the old proven Winchester 1300 action, which uses a rotating bolt to cycle the shells. This particular one has a pistol grip and cross bolt safety, 18.5” barrel with a hooded front fiber optic sight and ghost ring rear sight. The receiver has a 1913 picatinny rail for mounting optics. 

  The model I bought came in flat dark earth stock and hard rubber butt stock, already has sling point attachments on the front cap and the rear of the stock. Right in front of the forend are access points that are on both sides of the 90 degrees apart. They are 1913 rails as well for mounting your favorite accessory to. It has a capacity of 5 rounds for 2.75” shells but has the capacity to hold 3” as well. The shotgun weighs in around 6 pounds with an over length of 38.25”. The trigger pull is a bit heavy on mine, tripping the gauge at 7 pounds. The forearm on the M320 is a little longer than most tactical or home defense shotguns, most of the ones I have encountered are around 8 to 9” long, the one on the Stevens is roughly 11” in length. Does this make a big difference? Not really, just some added weight and hey it has a nice rack.  

  So let us get to the shooting of this Chinese beauty with the big rack. I mounted a Swamp Fox Liberator Green Dot green dot on top of it just because I had one laying around and figured why not. This was a great choice when I went to the range. Remember this is a cylinder bore choke, which means it is not constricted like most hunting shotguns, nor does it have interchangeable choke tubes. This shotgun was made for close work. With that being said I found out that my local Wally world was selling ammo on the cheap and they had their Federal slugs on sale for $2.50 a box, so I bought all they had. With over 200 rounds of 3” slugs and 300 rounds of Rio 2 ¾” buckshot and more than I can count of mixed birdshot loads I was at the range. I sighted in at 50 yards on paper with the slugs and was getting great results. The best group I got was 1 ¾ inches at 50 yards, I was pretty happy with that. We did have some 12” steel set up at 100 yards and I could ring those every time with the slugs. After an hour of brutal shooting of slugs, I noticed I was closing my eyes and developing a flinch. I stopped shooting the 3” slugs. I went with something a bit lighter and did what I could to mimic patterning at about 40 yards and in with the buckshot. I was impressed at the spread that it kept at that distance. I ran out of paper targets so I spent the rest of my time shooting plastic bottles, bricks, logs and whatever else I could find on the junk section of the range. 

  So how did it shoot? Just like a shotgun should, it went bang, it destroyed anything that was in front of it. It ate any shells I put in it. But, here it is, there had to be one. I didn’t tell you this in the initial description, but it has a pistol grip. I absolutely hate pistol grip shotguns now. My wrist felt like I had punched a brick wall over and over. The direct impact into the web of the hand was terrible. The pistol grip made it so I could not get to the slide release switch easily. If you had gloves on it would be a no go. Now the gun for what it is ran fine. It is smooth, the trigger is a little heavy. The forearm is too long if you want to put shell cards on the side. It will cover part of the receiver up. You might be able to use a 4 shell card, but not one of the larger ones. The forearm is a little weird in design, it is not what I am used to but I am not going to call it a negative, just different. It seems to be big on the front and then flows down to an undercut of some sort towards the rear. This might be by design for smaller shooters.

  Overall this is a good shotgun for home defense, maybe a slug gun for deer hunting or varmint control. Throw it in the toolbox of your truck, under the seat, strap it to the rack of your 4 wheeler or to the back of your side by side. I feel for the money $199 when I bought mine, you can't go wrong. I have used mine on several bear and hog hunts, dropped it in the water while getting into my canoe, it does ride on the back of my saddle from time to time while riding horses. If I skin it up, scratch it, take the paint off of it, I won't cry like I would if it was a Beretta shotgun. 

  Is this shotgun for you? Well what is your budget? What is your intended use? Do you use shotguns a lot? I am not a big shotgun hunter, I break one out a few times a year when I go on specialized hunts, so I really do not own expensive shotguns. I own guns that run. I am not saying this is better than my 870, 835, 1100, 500, 590, 37 or what have you. I own a bunch of shotguns, they are tools to me, this M320 is a tool, it is a cheaper tool that has been cloned from a really good tool and has had a few modifications made to it. Would I stake my life on it? YES, I have and I will continue to. Every time I go into the woods to hunt big hogs or black bears and I have this shotgun, I trust it with my life. This is just my thought so take it how you want. I have well over 1000 rounds of high brass shells to cheap birdshot and haven’t had a malfunction yet. Now it is smooth but when I rack it I run it like I am trying to drive the forearm off of it. Just because something is made in another country and its budget means it is junk, you have to do your research and see for yourself. Don’t go off of one man’s opinion and think it is gospel. I am here just to tell you how my shotgun worked. 

Firearms Insider Reviews - 8 Key Points

Target Market:

  • Anyone looking for a budget home defense shotgun

  • Value consumer

FNBs (Features & Benefits of this product):

  • Good ergonomics

  • Good price

  • Well balanced

  • Reliable

  • Barrel Length 18.5 (in)

  • Barrel Material Chrome Alloy Steel

  • Magazine Capacity 5

  • Ambidextrous

  • Length of Pull (in)13.75 

  • Overall Length  39.1(in)

  • Receiver Finish Matte

  • Receiver Material Light Alloy

  • Stock Material Synthetic

  • Stock Type Pistol Grip

  • Weight 7.2 (lb)

What other aesthetic options or finishes are available?

  • Field grade models for hunting

  • Models without pistol grip

  • Different finishes

  • Available in 20 ga

What others are saying?:

A shotgun that can do it all at a price that nearly everyone can afford, the Stevens 320 pump-action was designed for versatility and affordability

The reliable Stevens 320 pump security 12 ga. shotgun has everything an LEO needs to hit the streets—and it comes at an affordable price.

Link to other reviews:

https://www.youtube.com/watch?v=81oxsoEf3yg

https://www.americanrifleman.org/content/stevens-320-pump-field-grade-shotgun/

Price point:

MSRP = $311.00

I need it now! Availability:

Check your local gun shop or online

Our Rating:

Pros:

  • Great price

  • Well made

  • No sharp edges

  • Good fit and finish

Cons:

  • Trigger pull is heavy

  • Lack of aftermarket parts

  • Forearm is too long

  • Pistol grip

  • Slide release

Score:  7.00 Good

,

Primary Arms GLx 1-6x24 FFP ACSS Raptor

,

  When I opened the box with the Primary Arms GLx 1-6x24, I was super excited. The GLx 1-6x24 is one of Primary Arms’ mid-tier optics. So it falls, price and feature wise, in between their SLx and PLx lines. This particular GLX 1-6x24 has an ACSS-Raptor reticle and is a first focal plane (FFP) optic. This low power variable optic (LPVO) is packed with features.

  Since the reticle is such an important part of your optic, let's start with the ACSS Raptor M6 reticle. The Raptor M6 Advanced Combined Sighting System, or ACSS, is a range estimating and bullet drop compensating reticle. Being that it is a FFP optic, the ranging and estimation properties stay the same throughout the magnification range. This is a big plus as one doesn’t have to recalculate anything at different magnification ranges. The Raptor M6 reticle is calibrated for these cartridges: 5.56 NATO, 5.45x39, .308 Win, 6.5 Grendel and 6.8 SPC. Give or take a few differences in actual ballistics. I mounted it on a 5.56 AR with a 16” barrel and the drop estimations seemed to work well, at least for the ranges I could test. 

1x - targets at 50, 100, & 200 yds. Full reticle illumination

6x - 200 yd targets. Full reticle illumination

  A description of the Raptor M6 reticle is probably in order. The Raptor is a horseshoe style reticle. So there's a larger circle around a chevron aiming point (think triangle). The circle is missing the bottom portion, hence the “horseshoe” name. Then the Raptor has a vertical line, with short horizontal lines on it, to compensate for bullet drops at various ranges. There’s also some dots for wind holds, if needed. On the right and left side of the chevron are MIL ranging lines. These are to quickly assess the range of a 5’ 10” target. The middle chevron aiming point is where precision comes into play. Use the top point of the chevron for accurate aiming. Or just put the chevron over something for quicker shots. The bottom triangle point will be your 200 yard holdover, and then the bottom of the chevron will be your 300 yard holdover. All of this is in Primary Arms’ manuals, I’m just trying to give you a quick summary. Now, if you turn the GLx 1-6 down to its true 1x, the reticle gets pretty small. Don’t fret, this is actually very useful. Now you can use it for super quick shots up close. Very similar to a circle dot reticle in a red dot. Even with both eyes open. Oh, did I mention the chevron is illuminated? It is, but it and the horseshoe are the only parts that are illuminated, the rest of the reticle stays black. 

  Primary Arms also stuck their “Autolive” on/off into the GLx 1-6. The autolive turns the reticle off after 3 minutes of no physical movement, then quickly turns it back on when a tiny bit of movement happens. I love the autolive function and in the case of the GLx, it gives around 600 hrs of battery life. They say it is a daylight bright reticle, but in direct sunlight, the red illumination is pretty non existent. Any time besides direct sun, the reticle’s illumination is easy to see and brightly lit up. It has 10 brightness levels, with and off between each one. I like that there's an “off” between each “on.”

  Now that the long winded reticle explanation is done, we can focus on the glass in the GLx 1-6. Primary Arms uses low-dispersion glass that is multi coated. Why do you care? Because it makes everything look super clear and bright. Yes, the glass is really that clear. The magnification ranges are true to the numbers, so 1x is really no magnification, and 6x is really 6 times normal. I really appreciate the true 1x for running close targets at the range. The 6x makes it pretty easy to hit targets at various ranges also. The field of view is pretty decent, specs are below if you're interested. The eye relief is pretty forgiving at 1x, it’s around 3 to 3.5 inches, but you don’t need to be perfect with it. At 6x that’s a different story, you really need to be in the scopes sweet spot. The clarity of the glass really does rival some of the higher end 1-6’s

  If you are not using the GLx’s Raptor reticle for bullet drop compensation, it has some pretty nice turrets to use instead. The GLx 1-6 comes from the factory with capped turrets. But hold on, there’s something more in the box. Also included is a single exposed turret. Yes, you can replace the elevation turret with a non-capped one. I suppose you could put it on the windage turret also, but why.  Now you can dial in the adjustments as necessary without having to take the cap off. I get that if you are running around in the woods, or doing secret squirrel stuff, you might want the advantage of having capped turrets. But for me, I instantly installed the tactical, non-capped turret. Adjustments are the same either way and adjust in increments of 0.1 MIL’s. These adjustments also use a steel on steel mechanism. This means you’ll have consistent adjustments and repeatability for a lifetime. The GLx 1-6 does have some physically large turrets. This makes it much easier to adjust with gloves, or just in general. The clicks are fairly decent and audible. They feel a tad bit mushy to me, but that’s probably due to the sealing that keeps water and dust out. In all, the turrets adjust well. These turrets can also be loosened up and set to zero. Not a zero stop, but at least you’ll have a zero point to adjust from. 

  There are a few other notable aspects of the Primary Arms GLx 1-6. One is the throw lever. The throw lever makes it easier and quicker to adjust the magnification ring. The ring adjustment operates smoothly, but having the throw lever is really nice. It sticks up about ½” above the ring. So it isn’t really in the way, but is still large enough to matter. Primary Arms also made the lever removable and changeable. It is screwed onto a tiny dovetail. Just unscrew it and slide it off to change it to a larger one, a folding one, or just to leave it off. This next aspect is its weight. It weighs in at 21 ounces. This is a few more ounces than some others in this mid-tier. When I say a few more, it’s like 3 ounces difference, so not much. But on the plus size of the weight, the GLx 1-6 is built like a tank. It is solid. I wouldn’t hesitate to use this LPVO harshly.

  If you are in the market for a top quality LPVO, but don’t want to pay top-tier pricing, the Primary Arms GLx 1-6x24 might be everything you need. The glass is super clear, it has a very useful FFP reticle, is pretty much indestructible, can range objects on the fly, and turns on and off automatically. What more could you want? I’d definitely look into one of these if you intend on running your stuff hard. You can check the GLX 1-6x24 ACSS Raptor M6 out at Primary Arms, as well as all the other products they have over there.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Mid-tier low power variable optic (LPVO) with first focal plane reticle (FFP)

Target Market:

Those wanting a quality mid grade LPVO

FNBs (Features & Benefits of this product):

  • 1-6x Magnification

  • 24mm objective

  • 3.3" - 3.5" of eye relief

  • FOV: 104 ft at 1x, 18 ft at 6x

  • 30mm main tube

  • High strength one-piece 6061-T6 aluminum body

  • 10.25" long

  • Weighs 21.3 Oz

  • Premium grade glass

  • Steel-on-Steel precision adjustments

  • Tactile and audible 1/10 MIL click value

  • Turrets are user configurable between Tactical or Capped

  • Movable and replaceable magnification ring fin

  • Partial reticle illumination - Inner part only

  • First Focal Plane ACSS Raptor M6 Reticle

  • Autolive motion activated illumination

  • 10 total brightness settings, 2 of which are night vision compatible 

What other aesthetic options or finishes are available?

Griffin M6 reticle   

What others are saying?:

5/5 stars at Primary Arms

EXACTLY WHAT I NEEDED

Using this for an old m1a, as a red dot and magnifier don't really work for that platform. The glass is very clear and good eye relief, I zeroed and used out to 400 yards. Impact at 200 and 300 worked well on the bdc reticle, but I had to hold about 450 to hit the 400. I have access to longer range but haven't had chance to try it out yet. I let my friend shoot it and he was very impressed by the glass. Great scope for the price, it is bright on 11 but not like an aimpoint when shooting in the sunlight

Link to other reviews:

Thin Line Defense on YouTube it’s the Griffin reticle, but close enough 

Price point:

MSRP = $599.99

Retail = Same, but Primary Arms runs sales all the time

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Super clear glass

  • Ranging reticle

  • Large capped turrets

  • Optional Elevation turret that replaces capped one

  • Autolive motion activation

  • Removable Throw lever

Cons:

  • Reticle is not daylight bright

  • Heavy-ish

Score:  8.00 Great

Favorite Link:  Walker Defense Research

Modern Spartan Systems

  Maintaining your firearm is a key point to keeping them shooting properly. Modern Spartan Systems is in the market to help you with all those needs. If it’s cleaning, oiling, greasing, or anything else you might need to maintain that firearm, they have you covered. I received one of their “Starter Kit Plus”, some Blade Oil, and even an engine additive. I’ll try to inform you about the products and how they worked for me.

  Modern Spartan systems uses a Nano Shield technology to make their products. This Nano Shield allows molecular particles to penetrate and fill in microscopic gaps in metal. It does this through heat activation. Some parts, like barrels, will do this under their own heat. Other parts might need to be heated in an oven to obtain this. But mainly, just put it on and use it as normal. It effectively smooths out all the rough spots that one can only see under a microscope. 

  Another thing that makes the Modern Spartan System products stand out is their “green” labeling. Essentially their products are marked “green” or “earth friendly”. They use the definition of green from the EPA. The EPA standard says that they must be either biodegradable or inert. Modern Spartan Systems does, almost jokingly, say “Although we are not recommending that you ingest our products or use them as salad dressing, our formulas are generally quite safe to work with.” So if you are worried about harsh chemicals, these might be what you need. These products work just as good, better in my opinion, then those caustic ones you are used to.

  The Starter Kit Plus is exactly that, a kit that includes all the cleaning and lubrication you need. It comes with the Modern Spartan Systems Accuracy Oil, Carbon Destroyer, Accuracy Grease, Copper/Lead Destroyer, and Crystal Clear.

The Carbon Destroyer and Copper/Lead destroyer are your cleaning products. Use the Copper/Lead Destroyer for cleaning barrels, slides, bolts, etc, as you would any other bore cleaner. It works well on both copper and lead. The best part is that there aren’t any harsh smells. If you have ever tried to get out copper with an old school solvent, you know what I mean. My absolute favorite product in the kit is the Carbon Destroyer. It works like nothing else I have ever used, including other carbon removers. Just soak your carboned up part for a bit and then wipe the carbon off. If it doesn’t all come off, just repeat. Or scrape the carbon off much easier because it has been loosened up from the Carbon Destroyer.

The Accuracy Oil and Grease are where the Nano Shield tech really shows. For our purposes, the grease is just thicker Accuracy oil for parts that need grease. So anything about the oil, also applies to the grease. Now the Accuracy Oil is fantastic! It is called “accuracy oil” because of the Nano Shield technology. By smoothing out the imperfections in your barrel, it makes it more accurate. As a byproduct, the barrel is also easier to clean. The amount of gained accuracy has a lot of variables, but it does have some validity. I just can’t say if it helped my rifle, since I am not as good of a shooter as I once was. The other huge advantage to the Accuracy oil is that it reduced friction by 90%. I can actually feel the difference when cycling my firearms. Since it also bonds to the metal, it protects the surface. I also noticed that it doesn’t become sticky like other oils I’ve used. It stays slick even after sitting for a while. 

The Crystal Clear is Modern Spartan’s glass cleaner. It works on plastics also, so you can use it to clean your safety glasses. It is designed to be used on scopes, binoculars, and glasses. In order to get the most accuracy out of a firearm, you need to have the scopes glass clean. Just spritz some of the Crystal Clear on and wipe it off with a cleaning cloth. Since I wear prescription glasses, I used this on them also. My lenses came out super clean. The small bottle is great to keep in your range or hunting bag. 

  Modern Spartan Systems also sent a bottle of their “Blade” oil. This is their knife oil and protectant. Very similar to the Accuracy oil, it also reduces friction by 90%. The “Blade” oil also creates a slick surface to help sharp things glide through whatever they are cutting. It also bonds with the metal to create that same Nano Shield. On a knife, this helps the blade to effectively be sharper by smoothing out those microscopic imperfections. You can use it on anything that cuts, from scissors to axes, and it will protect them from rusting. I’ve been using the “Blade” oil on all the knives around here. It definitely makes them open easier. I'm terrible at keeping my knives at their sharpest, so if the blade oil makes them cut better, I don’t know, but at least I know they are protected from the elements.

  I also was sent the “TVT” engine oil additive. You add this to your engine oil, and using the same molecular bonding as the other oils, it reduces friction. I have no way of actually testing this. Modern Spartan says it will increase fuel mileage by 5-10%. I saw about a 3% gain in mileage. Not a ton, but with overpriced fuel these days, 3% can be a good amount. 

  The Modern Spartan Systems Starter Kit Plus is great. It has 2 ounce bottles of everything you need to clean and maintain your firearms. The stuff really works, all of it, even the Blade oil. If I were to choose one product to buy, it would be the Accuracy Oil, followed by the Carbon Destroyer. Mainly because the oil does so much, and I use it more often. Do yourself a favor and go check out the products over at Modern Spartan Systems. They have stuff for fishing, automotive, knives, and of course firearms.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Advanced, green, cleaning and lubrication products

Target Market:

Anyone wanting great gun cleaning and oiling products - knives, fishing, and automotive too

FNBs (Features & Benefits of this product):

All products listed below are “Green” and Made in USA

Accuracy Oil  

  • 90% reduction in friction

  • Low stick surface so dirt doesn’t stick to it

  • Adheres to metal surfaces

Accuracy Grease 

  • The thicker version of the Accuracy oil

Carbon Destroyer 

  • Water based penetrating solvent

  • Micro-emulsion technology

Copper/Lead Destroyer 

  • Barrel metal safe - won’t damage metal parts

  • Low to no odor

Crystal Clear 

  • Optical cleaner for scopes, bino’s, glasses, etc

  • Safe for anything from plastic to glass

Blade Oil 

  • Knife Oil

  • Reduced friction by 90%

  • Protects and enhances knife blade performance

What other aesthetic options or finishes are available?

Tons, check them out at Modern Spartan Systems

What others are saying?:

5 out 5 stars at Modern Spartan Systems  

Amazing products!

I've tried the Carbon Destroyer and accuracy oil so far and they are a clear step up from every other gun cleaning and lube products out there. I am very particular with my choice of gun maintenance products and only use the best available. Spartan systems are the new King of the hill, by a measurable margin. My go to range gun has over 20K rounds through it already and now it feels better than brand new.

Link to other reviews:

Pew Pew Tactical 

Price point:

MSRP = Starter Kit Plus - $59.95 

              Blade Oil - $14.50  

Retail = Same Try “GGR15” code for 15% off

I need it now! Availability:

Modern Spartan Systems

Our Rating:

Pros:

  • Slick

  • Reduced friction by 90%

  • Bonds to metal

  • Can get a kit to try out

  • Carbon remover works fantastic

  • Improves accuracy

  • Made in USA

Cons:

  • Hard to find locally

Score for all products: 8.50 Great 

Favorite Link:  JSD Supply

,

Primary Arms SLx RS-10 red dot

,

  When I first learned about the new Primary Arms SLx RS-10 mini reflex sight, I was very interested. Then I received one, and was even more excited. This little, open reflex, pistol mounted red dot is everything they said it would be. Including a great price of $199.99.

Autolive in action

  The SLx RS-10 is packed with features. It runs a 3 MOA red dot that is easily picked up. It has 11 brightness settings. Of which include night vision compatibility and daylight bright. I couldn’t try out the night vision setting, but the daylight bright setting is really bright, even in direct sunlight. You should have zero problems seeing the dot in any light. The RS-10 also has easy to use controls on the left side. These buttons are only raised slightly above the RS-10’s surface. Of course they control brightness as well as actual on/off. I say “actual” because the RS-10 features Primary Arms’ “Autolive”. The Autolive is an automatic on/off function that works fantastic. Just barely move the sight and the dot turns on. After about 3 minutes of zero sight movement, the sight turns off. Any teeny movement will keep the RS-10 on. Back to the “actual” on/off. To turn the sight off, as if you are going to store it for a long time, just hold the up and down buttons simultaneously for a few seconds and the sight will permanently turn off. Then to turn it back on, and into the Autolive feature, just hold either the up or down button a few seconds until the dot turns on. Primary Arms specs the battery life at 40,000 hours with a CR2032 battery. So if you change the battery out once a year, you should be good to go and never have the dreaded dead dot. If you couldn’t tell, I really like the Autolive feature.

  Primary Arms also stuck some other features into the RS-10. For strength, they manufacture the housing out of 7075 aluminum. This is the same grade aluminum that quality AR receivers are made from, so it should be good to go. I really like the shape they chose for the housing and window. The rounded, almost square shape seems to draw my eye to the dot. I seem to find the dot much faster than other pistol mounted red dots. Primary Arms says the window size is 23mm and even if it is a smaller window than some brands, see the above comments. I mentioned battery life earlier, but the RS-10 does have a side loading battery tray. That means you can change the battery without having to remove the sight from your desired mounting platform, keeping your zero intact. Coming in at just over an ounce, the RS-10 shouldn’t weigh you down either.

  Anymore, the mounting method for a reflex sight is very important. Mainly because one needs to know if it will fit on their handgun. The SLx RS-10 uses the fairly common Docter/Noblex footprint to directly mount to stuff. Primary Arms also includes a picatinny rail mount and a Glock MOS plate. That way if you aren’t mounting it directly to a pistol, you have some options. For instance, it would make a great 45 degree offset red dot for a rifle. I ended up mounting it on a Strike Industries Liteslide for a G19, as it has a multi optic mounting platform. The SLX RS-10 mounted in perfectly. Primary Arms decided to go with the Docter mounting footprint so they could use that CR2032 battery and have it side mounted. Since the battery is physically larger than other options, you end up getting more battery life out of it. For the small size of the RS-10, a different mounting footprint just wouldn’t work. 

  The SLx RS-10 is a great little red dot. This doesn’t come without a few tiny gripes. If you hold the RS-10 on target, and start shaking it a tiny bit, in a circle, the dot will galaxy out. So it literally looks kind of like a little galaxy inside the window. Does it bother anything? Nope, when shooting the pistol I didn’t even notice it. Even on moving and circling targets. Most people probably wouldn’t even notice it. I also would have liked to see it on a RMR footprint, but Primary Arms didn’t do this because of those “battery” reasons. I can understand this. Now, on a good note. Even for me, with my astigmatism, the dot is fairly clear. So those with normal eyes will see a nice crisp dot. 

  I am going to say this, the Primary Arms SLx RS-10 is currently my go to red dot pistol sight. This red dot impressed me more than I expected. I can find the dot easily. I haven’t destroyed it yet. Even if I did, it has a lifetime warranty. The size doesn’t get in the way. I’d say it is somewhere between one of the super small mini reflex versions and a Holosun 507. The RS-10 is always ready to go because of the “Autolive” feature. The click adjustments for windage and elevation make it easy to make adjustments, unlike other mini reflex sights that have no clicks. I ran this thing fairly hard and have had zero problems. 

  If you are looking for a mini reflex red dot, the SLx RS-10 from Primary Arms might be it. It is priced under $200. At that price, it’s a great deal for this feature packed red dot. With the Autolive function, you won’t have to worry about if the dot is on or off, because it will always be on. I don’t think you can go wrong selecting the Primary Arms SLx RS-10 mini reflex sight. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality Mini Reflex red dot sight for a great value

Target Market:

Anyone wanting a decent priced pistol mounted red dot

FNBs (Features & Benefits of this product):

  • 7075 aluminum body

  • Side-loading CR2032 battery compartment

  • Convenient push-button controls

  • 11 Brightness settings

  • Daylight bright and night vision compatible brightness levels

  • 3 MOA dot

  • Picatinny Rail Mount and Low Profile Adaptor Plate for Glock® MOS Slides Included

  • Autolive motion activation

  • 40,000 hour battery life

  • Weighs just 1.07 Oz

  • 23mm window

  • Lifetime warranty

  • Docter/Noblex footprint

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out of 5 stars on Amazon 

Another great option from PA

Mounted on my Canik Rival with no issues. Great product for the price. Will highly consider getting another in the future.

Link to other reviews:

Lynx Defense  

Price point:

MSRP = $199.99

Retail = $199.99 but Primary Arms is constantly running sales

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Autolive motion activation

  • Price

  • Dot is easily picked up

  • Side loading battery

  • Actual “click” windage and elevation adjustments 

Cons:

  • Doctor / Noblex footprint

  • Galaxies when circling a target fast

Score:  8.00 Great

Favorite Link:  Walker Defense Research

Walker Defense Titanium BCG

  Titanium bolt carrier groups (BCG) are one of the mysteries of the AR world. A few companies manufacture them, but what are they really for? I’ll try to answer that with the Walker Defense Research Titanium BCG.

  If you are looking at a Titanium (Ti) BCG, like the Walker Defense one, it is probably because of weight. Meaning you are trying to get the lightest possible parts around. The Walker Ti BCG weighs 7.8 ounces complete. A standard BCG weighs 11.8 ounces on my scale. That’s an off the shelf weight saving of 4 ounces. I know, that doesn’t seem like a lot, but when every ounce counts, that's a bunch. An important note is that the bolt is not titanium, it is 9130 steel with a Nickel Boron coating. The bolt is also magnetic partical inspected (MPI). A Ti bolt just doesn’t have the correct metallurgy to work, but for the carrier, it’s great. The Ti carrier, without the bolt, only weighs 5.7 ounces. 

  The Walker Defense Ti BCG is of the standard M16 profile. This is done so that it will work in almost every scenario, except piston guns. It is for direct impingement AR’s only. The M16 profile also gives the BCG strength and reliability. Cutting away material can weaken a BCG or make it not function correctly. Walker makes the BCG out of 6AL-4V grade 5 titanium. This even goes above my material knowledge, but I bet that they know what they are doing, especially since this titanium seems to be the standard for Ti BCG’s. An Ionbond Diamond Like Carbon (DLC) is then put on the carrier. This DLC coating gives the BCG a longer lifespan and makes it super smooth. Of course you need excellent machining to have a smooth coating, and the Walker Defense BCG definitely is machined super smooth. 

  Another reason for choosing a titanium BCG is for reduced recoil. The Ti BCG reduces recoil because there is less moving mass. This does come at a price. One also needs an adjustable gas block. This is a must for any lightweight BCG, not just the Walker Ti one. Then you have to tune the adjustable gas block. Good ones come with instructions on how to do this. Some might say that you can “tune” the Ti BCG by using heavier buffers and stuff. But a heavier buffer just adds more weight and more recoil. Isn’t one reason you would choose a Ti bcg is for weight? I can attest to the lower recoil of the Ti BCG. I have a Superlative arms adjustable gas block, tuned to eject the brass at about 3:30. According to the Mantis x, it reduced muzzle rise by over 50% and recoil width by over 80%. You can see in the short video that even with an A2 flash hider, there is hardly any recoil or muzzle climb. I could definitely feel the difference. 

  I was a little hesitant to try the Walker titanium BCG out. I just didn’t understand why I needed it. After using it thoroughly for some time, I can say it definitely makes the AR shoot so much smoother. All the claims are correct. Reduced muzzle rise. Reduced felt recoil. Faster follow up shots, due to those previously mentioned reductions. Yes, the BCG price can make you gasp a little. But in the end, it’s not much more expensive, if any, than other low mass BCG’s. Even some enhanced BCG’s are in the $250 range. The Walker Ti BCG also has forward assist notches, something a lot of the other lightweight carriers don’t have. For me, I just can’t get over how smooth the recoil impulse is with the Walker Ti BCG.

  Probably the last reason to choose Walker’s Ti BCG is durability. Titanium tends to be more resistant to heat and pressure. What do direct impingement guns have? Hot gasses being directly blown into the carrier. So anything that is more resistant to heat is a good thing. Walker also correctly stakes the gas key on, so it won’t be moving around causing problems. Just lube your Ti BCG as normal, and you should get a long life span from it. 

  The Walker Defense Titanium BCG does everything a BCG should do and more. The “more” is why I really like it. It’s lightweight, reduces recoil, is durable, and has a standard M16 profile. Hopefully you have a better understanding of why you would want the Walker Ti BCG. So if you want that “lightweight everything”, or just a super quality bolt carrier, head over to the Walker Defense Research website and give them a look. Everything I have from Walker is top notch and is always made in the USA.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight M16 FA Bolt Carrier Group

Target Market:

Lightweight builds, competition shooters, or anyone wanting a high quality BCG

FNBs (Features & Benefits of this product):

  • Compatibility: M16/ M4 / AR-15 Direct Gas Impingement (not for use in piston guns)

  • Calibers: 5.56x45mm NATO / .223 Remington / .300 AAC Blackout

  • Profile: Full Auto Style Carrier w/ Properly Staked Gas Key

  • Carrier Material: 6AL-4V (Grade 5) Titanium

  • Bolt Material: 9310 Steel

  • Carrier Coating: Ionbond DLC (Diamond Like Carbon)

  • Bolt Coating: Nickel Boron

  • Firing Pin: Steel w/ Chrome Finish

  • Made in the USA

  • Weight: Carrier-only (titanium): 5.7 oz, Total (Carrier, Bolt, firing pin, etc.): 7.8 oz

  • Adjustable gas block is highly recommended 

What other aesthetic options or finishes are available?

Carrier only

What others are saying?:

5/5 stars at Walker Defense   

Surprisingly Good

When I decided to upgrade my mil-spec bolt carrier group ("BCG"), I did a lot of research. I found a review of the Walker Defense Research BCG on Pew Pew Tactical. I was impressed by the statistics . I there and when I went to the site, found the NERO, a three-d printed muzzle device. I was impressed by the willingness to explore new technologies. I bought both a NERO and this BCG. I have a JP captured spring and a Superlative Arms adjustable gas block. With the mil-spec BCG, I could only tune the rifle to 1.5 turns into bleed (22 clicks on the detentes). It was a good result. The Walker DR BCG allowed me to bleed off another 1.5 turns (28 clicks). Because of that, I have extremely little barrel movement and keep my targets well (understand that the NERO is not on this rifle so there is no effect--this is strictly the BCG. With less mass, there is less slam. Whenever I take it to the range, others notice the smoothness and my targets. I have offhanded 120 rounds at a session and it is only my wallet that caused me to hang it up in a session. Two other things to mention: 1) my clockworks stay noticeably cleaner because I am able to bleed off so much dirty gas; and 2) the coating quality goes all the way out to the edges. This second issue needs a bit more explanation. On the mil-spec BCG the edges wore nearly immediately. The quality of the finish is so good that the edges remain crisp at 1,250 rounds. I have no reservations about recommending this BCG. I would suggest that you take full advantage by getting an adjustable gas block as well. The two together really make the gun a sweet shooter. My sons have various ARs but they always find an excuse for shooting mine.

Link to other reviews:

Nothing found

Price point:

MSRP = $359.99

Retail = $306.00 with “INSIDER15” discount code

I need it now! Availability:

Walker Defense Research 

Use “INSIDER15” FOR 15% OFF

Our Rating:

Pros:

  • Super lightweight

  • DLC coating on carrier

  • Nickel Boron coating on bolt

  • M16 Full Auto carrier specs

  • Super smooth operation

  • Less felt recoil

  • 100% Made in USA

Cons:

  • Price

  • Needs adjustable gas block

Score: 8.50 Great

Favorite Link: JSD Supply  

Surefire X300 Turbo

By: Shan Hemphill

  Surefire is known for supplying quality, robust lights that are made in the USA, and supplies heavily to law enforcement agencies. Surefire products have a lifetime warranty, and there are many comments on the Internet about how Surefire has quickly resolved problems. Surefire is also known to be slow to release new lights, so their Turbo versions of the X300 and Scout have been heavily anticipated since their announcements at Shot Show 2022.

  I obtained 4 samples of the X300 Turbo, allowing me to gather data from multiple lights, then compare versus some of the best in the industry.

Specs:

Lumens: 650

Candela: 66,000

Runtime: 1.5 hours

Batteries 2x CR123A

Switches: Ambidextrous push (momentary) / toggle (constant)

Water Protection: IPX7

In the box:

  Inside the packaging is the light itself, 2 Surefire-branded 123A lithium batteries, instructions, and rail keys depending upon whether you’ve purchased the “A” or “B” version. The “A” version utilizes a spring rail key attachment system, and as a result, the box includes an extra spring rail and a tool to remove. The “B” version includes an extra rail key. Both also include a battery door pin to help keep the door from opening unexpectedly. 

  Fitup of either version is easy, but be aware that this is a large pistol light. It fits on the majority of pistols that utilize a full size rail, but it sticks out beyond the muzzle on most full size pistols. It even sticks out beyond the end of my compensated Glock G19x.

  The X300 Turbo is exactly the same size as the X300 Ultra. That’s important because there are a million holsters for the X300U;  you should be able to find concealment holsters for IWB or OWB, and if you’re on duty using a X300U already, you can keep your existing retention holster.

  Even though the package is long, I have been comfortably carrying the pictured package AIWB. Yes, that means I appendix carry one of the longest pistol and light packages on the market. I do so in the Werkz M6 holster, but I carry in the deep position with a little negative cant dialed in. I find this quite comfortable and easy to carry day in and day out. While it’s not G43x small, it’s workable.

  The light takes two CR123A batteries. While many people now prefer rechargeables for their lower cost and higher output capability, I do appreciate prime batteries for their long-lasting power output, and that I can easily swap batteries while training. 

  I tested all 4 of the X300T samples for lumen output in my integrating sphere, capturing both the absolute maximum, and calculating the ANSI / PLATO FL-1 lumens (which average readings from 30 to 120 seconds). Here are my results.

I also captured candela using similar measurements.

  All the lights performed well, but I did observe some variance between them. This is typical of lights; the electronic components (especially the LEDs) can vary from light to light giving different readings. 

  It is interesting how the light seems to get stronger for about the first 15 seconds, then it levels out and drops off.

The competition

  Given the high candela output of this light, probably the best light to compare to is the Modlite PL350 using either the OKW or the PLHv2 head. The PL350 is similarly priced, and the OKW head is rated at similar candela output at a rated 69,000cd. Here are my measurements:

  As we can see here, the new X300 Turbo has significantly more candela than the Ultra, and has competitive output compared to the PL350 with the OKW head. This is impressive output from CR123A batteries.

  I measured candela at angle, which provides a graphical view of the width of light intensity. If wider angles have higher candela output, then the light has more flood. If a light has a peak, then drops off near zero, then it has all throw and almost no flood.

    In this case, you can see that the PL350 with the PLHv2 head has a fair amount of output up to 5 degrees. In comparison, the X300U is much flatter, showing in graphical terms how it provides much more flood than the other lights.

  I also gathered lumen data, which allows me to measure instant max lumens, and calculate ANSI / PLATO FL-1 lumens, and runtime.

In this chart, we see that the highest lumen is from the Ultra, which is no surprise given that light’s focus on output and flood. There are two Turbo samples here because sample 1 seemed to have an issue with runtime that I didn’t see in the other 3, so I included sample 2 as an example of how the majority of the units tested out. It’s good to see that the Turbo can run 1:15 still outputting almost 400 lumens. 

Practical Testing

I stood downrange and had each of the lights shone into my eyes. Excepting the Ultra, all of these lights were painful to look at and I had a hard time determining distance or position of the person holding the lights. From the camera angle, you can see that all of these lights provide a degree of flood, and each light has a slightly different color tint.

Summary

Here is a summary of the data shown here:

Based upon the data gathered here, I personally am upgrading from my Streamlight TLR-1HL to the Surefire X300T. In particular, sample 3 impressed me not only with output but also with a slightly warmer color temperature out of the group. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Candela is competitive with the best pistol lights, backed by the Surefire reputation and fits in existing X300 holsters.

Target Market:

Military, law enforcement, and citizens who want some of the highest throw possible in a pistol light.

FNBs (Features & Benefits of this product):

  • Feature: 66,000 advertised candela

    • Benefit: Provides high throw capability – can illuminate further out than most pistol lights

    • Benefit: Defeats photonic barriers such as auto glass, headlights, and dark corners better

    • Benefit: Helps control subjects better by blinding themselves

  • Feature: Same form factor as the X300U

    • Benefit: Fits in all your existing X300 holsters

  • Feature: Retains X300 existing momentary and constant switches

    • Benefit: Operator can select between momentary activation and constant activation

  • Feature: Surefire build and reputation

    • Benefit: High quality made in the USA product with an excellent warranty

What other aesthetic options or finishes are available?

Comes in “A” and “B” flavors. The A version uses a sprung lever & key to lock in to the rail. The “B” version uses a key but has a screw to clamp to the rail. My personal preference is the “B” as I can clamp it down and eliminate rate. However, many people also have good success with the A version by using the correct key, or by putting some electrical tape on the top to reduce or eliminate the rattle.

Comes in black and tan.

What others are saying?:

T-Rex Arms:

Surefire was able to change the throw of this light without changing the external dimensions or size of the light itself, so you’ll be able to use with the holsters out there. They were able to squeeze this power out of CR123A batteries.

Big Tex Ordnance: 

“Still the standard, I regretted trading up to the 1000lm from the 500, this has the right spot and a nice flood, fits my existing setup and I might be losing it but the switches feel a lot easier to manipulate than the ones on the 1000.”

“Great light; amazing throw, intense hotspot, but still has a decent amount of flood. This is nearly as good outdoors as my Cloud Defensive Rein while being much smaller and still being the same size as my X300U. I don’t think you need to run out and replace all your old X300s and TLR-1s, but if you’ve got a handgun that needs a light, this should be a no-brainer.”

Link to other reviews:

https://youtu.be/Ra2j0mo_5zU

https://www.lowlightdefense.com/surefire-x300-turbo-the-king-reclaims-the-throne/ 

https://www.reddit.com/r/tacticalgear/comments/wjrnue/x300_turbo_is/ 

https://www.youtube.com/watch?v=9Ne1U85IEBA 

Price point:

MSRP = $379   

Primary arms = $322   

Big Tex Ordnance = $322

I need it now! Availability:

Seems out of stock everywhere. I think Primary Arms might be a good source.

Our Rating:

Pros:

  • Some of the highest candela in this segment. 30 seconds in, my 4 lights averaged 61k. Some people think candela is only for rifles, but it is also useful for defeating photonic barriers such as when shining a light through a car windshield and against the car’s headlights. Candela also helps blind a subject, making it difficult or impossible for them to see you.

  • Still has decent flood, similar to the Modlite OKW. Not as wide as the Ultra, but testing shows it sufficient for most indoor operations. Output is good, and for indoors it is possible to shine the light up (umbrella lighting) or down against the bottom of the wall (baseboard) to help diffuse the light.

  • Consistent output: our testing shows 96% output consistency from run to run. Some lights are much lower, down around 85%. 

  • Generous runtime of 1.5 hours

  • Utilizes existing X300 holsters, and literally everyone makes holsters for pistols with the X300.

  • Switches provide both momentary and constant activation, and do so intuitively.

  • Utilizes common CR123A batteries.

Cons:

  • This is an expensive light at just over $330 street price.

  • Switches are adequate and provide both momentary and constant activation, but they can feel stiff or sticky, and the momentary activation pokes my thumb  under recoil. 

  • Some people will see the high candela and lack of flood as a reason not to run the light. My experience is that high candela lights do restrict some of the peripheral view, but I know how disorienting a high candela light can be when it’s aimed directly at my face. I can overcome most of the concerns about “blinding myself” or “it’s too focused” through training.

  • It’s still a large light, one of the largest on the market. 

Score:

This is now my EDC light on my Glock 19x. 

I rate it at 8.50 - Great. 

Favorite Link: Geek out on all the data HERE

Victory Operational Works Crusader Holster

  Victory Operational Works is a veteran owned company making a unique holster system. The Crusader is a 2 piece multi-use holster which is not your typical pancake style. Victory Operational Works also has one called the Crusader Max which has a built in mag carrier. I chose the standard Crusader in Kryptek Neptune, but Victory also sent me one of their Conspirator individual magazine carriers to try out. It is also in Kryptek Neptune. Both of which exude quality.

  The Crusader comes complete with everything you need. When I say everything, it really means everything. When you pull the Crusader out of its nicely sealed packaging, a bag of accessories comes out with it. In this little bag is all the extra hardware you need to change the Crusader from an inside the waistband (IWB) holster, to an outside the waistband (OWB) holster. This includes screws, rubber grommets, Torx style allen wrench, etc. The OWB mounting isn’t just some flimsy belt loops, Victory Operational Works gives you an official Blade-Tech Tek Lok to use for OWB carry. The Tek Lok is a proven secure mounting method that has built in belt width adjustments. For IWB use, the Crusader holster comes, out of the package, with an installed Discreet Carry Concepts 1.5” monoblock. The DCC clip also has a laser engraved “V” on it which is a really nice quality touch that I haven’t seen before. In my opinion, the DCC clips are the best IWB clips around. So check a box for Victory doing stuff correctly. 

  With all those mounting options, Victory goes one step farther with the Crusader. The Crusader has a bunch of different mounting hole options. Essentially, all these holes give the user plenty of different options for carrying the holster by being able to mount the belt clip or Tek Lok. Most notably are the different holes for ride height and cant. With the IWB and DCC option, you have 2 different ride height adjustments, as well as a cant option. There are 2 different ride height adjustments in the OWB configuration. Besides the supplied mounting options, Victory puts in a bunch of different holes for OWB carry. This allows you to install your own type of OWB attachments. Most notably are the Safariland mounting hole pattern. I ended up mounting a QLS fork from Safariland so I can quickly just add or remove the Crusader from my battle belt. All of the mounting holes are riveted so they will last a lifetime. Another check for the quality box. 

  When it comes to the Crusader itself, it is unique. I say this because the holster is constructed of 2 separate pieces. A front piece and a back piece. They are molded to each individual firearm, to make a complete holster, by custom made inhouse jigs. Then they are mounted together with 4 screws and rubber bushings. These 4 mounting points also make it possible for the end user to adjust the tension on the holster. You can make the gun fit super loose, or super tight. Adjust the 2 down by the trigger guard for that “snap in” feel, but keep the other 2 screws looser, and the pistol seems to glide out of the holster with ease. Or tighten them all up equally for more of that normal holster feel. The way Victory makes these 2 sides allows for tall sight and slide ride optics. The Crusader is an open bottom style holster. The open bottom allows lint and stuff to not build up in the holster. It also allows for the use of threaded barrels and compensators to stick out the end of the holster, if you are using such products. One thing I noticed about the Crusader, is that it angles the butt end of the pistol in toward your body. I really liked this as it helps to hide the grip a little better. 

  Victory Operational Works also sent their Conspirator magazine pouch. The Conspirator is a molded, universal, single mag carrier for double stack magazines . It also comes with all the hardware that the Crusader comes with, plus some options for a different style of DCC clip. The mag holder is the same excellent quality of the Crusader. It also has multiple holes for mounting it however one would like, angled either direction, straight, lower, higher, etc. One of the features, of the Conspirator, is the insert piece that lets you adjust the magazine's retention. Not by just clamping the screws tighter, but an adjustable drag plate inside the magazine pouch. I really like the Conspirator mag pouch. It may seem expensive at $49.99, but when you figure in all the mounting hardware, it’s a decent value.

  Every convertible holster has some trade offs. For me, the Crusader makes an excellent OWB holster. I like everything about it in that configuration. Where I think the trade off is, is in the IWB configuration. Because of the 2 piece design, there is a little more material to try and hide. This caused the holster and pistol to print more for me at the 2:30-3 o’clock position. Appendix carry was a little better, but not much. I really appreciated the designed in angles, or curves, that Victory puts into the holster. These angles make it a very comfortable holster to wear for IWB carry. Even if it does print more for me. Those angles also make it more comfortable for OWB carry. The Crusader also is made so that the pistol's magazine release button is not covered by the holster. This allows you to change a magazine without unholstering the pistol. But for me, it means that the holster itself won’t drop the magazine. Which has happened to me before. So nice job Victory.

  If you are looking for that one do-all holster, the Crusader from Victory Operational Works just might be it. The quality and craftsmanship are top notch, even down to using torx head screws that are used throughout the holster. It has great adjustability and comes with everything you need to convert it between IWB and OWB carry. Made in the USA with a lifetime warranty, you should go take a look at Victory Operational Works and the Crusader holster.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality Universal kydex holster

Target Market:

Anyone needing a do-all holster

FNBs (Features & Benefits of this product):

  • Blade-Tech Tek-Lok included for OWB carry, offering two different carry options, vertical and FWD cant

  • Discreet Carry Concepts 1.5” Monoblock Clip, with “V” laser engraved including mounting hardware for IWB carry, offering three different carry options, two ride height options with .5” difference and FWD cant

  • All mounting hardware is stainless steel for strength and to prevent rusting

  • Four adjustable retention points, two on the trigger guard side and two on the slide side, creating a sandwich type retention that applies equal pressure around the holster that maintains a perfect fit regardless of how tight or loose the retention is set

  • Three point angle adjustment in OWB configuration utilizing the Tek Lok and rubber bushings

  • Final fit on each holster performed with actual handgun, never plastic guns

  • Open access to magazine release so magazine can be removed while handgun remains safely holstered 

  • Positive pressure created by rubber bushing on all hard points, eliminating the need for thread lock

  • T-15 tool included with each holster

  • Highly polished edge treatment

  • OWB hole pattern is universal and compatible with G-Code RTI, Safariland QLS and Blade-Tech to name a few

  • Muzzle end is open

  • Rear sight catch to rack slide single handed

  • Every hole drilled is finished with an eyelet for added strength at each hard point

  • Optic compatible cut front plate and relief channel created on back plate 

  • No questions asked LifeTime Warranty

What other aesthetic options or finishes are available?

Tons

What others are saying?:

5/5 stars at victoryoperationalworks.com

Very well made

I’ve purchased many holsters in my life. This is the most versatile holster I have found to date. It’s a great draw holster also. Very pleased.

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $129.99

     Mag Carrier = $49.99

Retail = $99.99 + depending on options

I need it now! Availability:

Victory Operational Works

Our Rating:

Pros:

  • Quality and craftsmanship

  • Standard design works with red dots

  • Open style (works with comps, etc.)

  • Everything included for IWB or OWB mounting

  • 2 piece design

  • Comfortable angled/curved design

Cons:

  • Larger than other IWB holsters

  • Prints more when using for IWB

Score: 8.00 Great

Favorite Link:  JSD Supply

AR Gold trigger

  Some time ago I was asked if I had ever used an AR Gold trigger. My answer was “no”, but I had heard they are pretty good. That led me to ask American Trigger Corporation if they would send one out for a full review. As one can guess, here I am with a full review of the Adjustable, curved, AR Gold trigger.

  When the AR Gold trigger showed up, I eagerly installed it into a lower receiver. The AR Gold comes in a nicely packaged box with some stickers and such. The packaging itself makes the trigger look like a finely tuned race car, which it kind of is. Since the AR Gold is a cartridge style AR-15 trigger, installation is very straightforward. 

  As mentioned, I opted for the adjustable version. Yes, a non-adjustable one is also available, its pull weight is set at 3.5 lbs. The adjustable one is also set at the factory to 3.5 lbs. I set mine a little lighter, down to 2.5 lbs. To adjust the AR Gold trigger, there are 2 set screws at the back of the trigger housing. Use the top screw. Clockwise will increase the sear tension, thus increasing the break weight of the trigger. Of course, turning the screw counter-clockwise will decrease the sear tension, lightening the trigger break. From ATC Gold’s website - “As you reduce the amount of spring tension on the sear, you WILL reach a point that the gun will not cock reliably when live firing – though it may still cock dry firing. On most AR’s this will occur somewhere between 3 and 2 lbs.” So go slowly with your adjustments. From my understanding, there is really no need to even go near the bottom screw on the trigger housing. I had no problems adjusting the AR gold trigger down to a measured 2.5 lbs, everything still safely checked out as normal. Individual results for the trigger adjustments may vary. ATC also designed this trigger from the ground up. It is not just a modified GI trigger in a drop-in cage. Which is really noticeable if you compare them side by side. 

  The trigger pull on the AR Gold is really good, but it may not be what you are used to. It is more like a really good 1911 pistol trigger pull. ATC has a good explanation on their website, but essentially it says “AR Gold is a single-stage with a slight bit of very light (8 oz.) of take up.” After the take up, you then hit the “wall,” this is where the actual pull weight is. Apply pressure and the trigger breaks super crisply. This is by far one of the crispest trigger pulls I have felt. When I measured it, at the bottom of the trigger shoe, the break only moved the trigger around 0.050”. So up higher on the trigger, the pull length is actually shorter. After the break, there is some slight over travel. Not a bunch, most people might not even notice it. Then there is the reset. The reset is short, essentially the same as the break of the trigger. But, the reset is not very positive. It didn’t seem to matter if the trigger was set to the factory 3.5 lbs, or the 2.5 lbs I set it at. I would have liked to see a more positive reset, but I could still shoot this trigger very fast. All kinds of “super fast” professional shooters use this trigger, so it’s not like the reset is slow.

  I chose the AR Gold with a curved trigger shoe. Why? Because I like the consistency that a curved trigger gives me. ATC also offers a flat style trigger shoe. I think the flat style looks better, but I’m about functionality. The AR Gold trigger shoe is pretty narrow. It doesn’t affect anything, it’s just notable compared to a GI trigger. The curve of the trigger feels very much like the curve of a GI trigger, at least to me. The trigger, as a whole, feels like an expensive watch. It functions superbly, but also looks elegant. 

  The AR Gold trigger could be used on just about any style of AR rifle. It is fast, has a great break, and is adjustable. So if you are just into backyard plinking, or full blown competition, the AR Gold might be something to look into. I’m probably going to stick it in a AR varmint rifle build, but what you do with one is really up to you. American Trigger Corporation did a great job making a 1911 style trigger for your AR. If you are into finely tuned race cars, or triggers that are similar, then you need to check out the AR Gold trigger.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Adjustable AR trigger with a super short break

Target Market:

Anyone wanting a top of the line AR trigger

FNBs (Features & Benefits of this product):

  • 3.5 lbs. (Adjustable Weight)

  • Drop Safe

  • Drop-In trigger module 

  • Includes .154” trigger pins

  • Short Reset

  • Short, Crisp break

  • Adjustable weight engagement and over-travel

  • Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal)

  • Made in USA

What other aesthetic options or finishes are available?

Flat faced trigger

What others are saying?:

4 out of 5 stars at Brownells

EXCELLENT

Pricey yes, but a great trigger. A clean sheet design. Not a reworked set of standard parts but a whole new way of thinking. Pulls very light and crisp. Yet punches deep pits into the primers. Can't comment on long term results until much more "testing" is done. But so far, perfect reliability and function. Just wish they were a bit cheaper. Then they would be a 5 star rating!

Link to other reviews:

Western Shooter  

Price point:

MSRP = $279.00

Retail = $279.00 at Rainier Arms  

I need it now! Availability:

American Trigger Co. or Rainier Arms

Our Rating:

Pros:

  • Super crisp Break - glass rod type

  • Adjustable

  • Thin trigger profile

  • Cartridge style drop-in installation

Cons:

  • Slower reset

  • Slight over-travel

  • Price

Score: 8.00 Great

Favorite Link:  Gun Guys Garage

SEARCH