Lucid Optics E7

  Small, fully enclosed, red dots have become commonplace. These dot sights can be used on rifles, shotguns, or pistols. That makes them very useful. Lucid optics has one of these enclosed “dot” sights named the E7. The Lucid E7 has something special under its hood. That special twist is a BLUE colored reticle instead of your standard red dot.

  Besides the blue reticle, Lucid’s E7 reflex sight is pretty standard. The E7 is essentially a square rectangle with a length of 1.78 inches. Okay, it is not a true square, but you get the idea.  It uses the industry standard footprint for these types of sights. That standard is the ACRO footprint. The nice thing about the ACRO footprint is that you can get a multitude of adapters to fit it on just about any firearm. The E7 comes with a tall picatinny adapter that is pre installed. Also in the box is a MOS adapter should you choose to run it on a Glock pistol. I used the tall picatinny adapter because I mounted the E7 on a Foxtrot Mike AR’ish pistol. It worked great in this configuration. 

  Before I get into the blue reticle design of the E7, let’s get into some of the specifications. This is a 1x reflex sight, so there is no magnification. The exterior is made from 7075 aluminum. So you should be able to bash it around if needed. The E7 tips the scales at a lightweight 2.65 ounces. It runs off of a CR2032 battery with a 50,000 hour life, thanks to the “shake awake” feature of the E7. The auto on/off feature is really a favorite of mine. The rest of the specs can be seen down below in the “Features” section.

  The Lucid Optics E7 is the first reflex sight with a blue colored reticle. Why blue? Blue is calming to the human mind. That leads to less fatigue if seeing it for extended periods of time. It also appears very sharp, making it ideal for reticle designs. But most important to us shooters, is that blue colors are typically not found on things we shoot at. Now if you are shooting in a field of blue flowers, that might be an exception. The blue reticle just doesn’t blend into stuff like a green one might. Even against blue sky, you can still see the reticle of the E7. So if you are training and have different color targets. When someone says “shoot the red target”, you don’t lose track of your dot with the blue, like you might with a red dot.

  Now for the reticle design. Lucid Optics uses their M5 reticle in the E7. I will do my best to describe it, but look at the picture of it. In the middle is a 4 MOA dot. This dot is surrounded by about two thirds of a 32 MOA circle. Then, on the bottom, at 45 degree angles, are two lines. Having both the 32 MOA circle and those two lines help to draw your eye straight to the center dot. Lucid Optics says that between the blue color and this reticle, it helps to give up to 30% faster target acquisition over just a dot. I do not know if I was 30% faster with the E7, but the reticle is pretty fast and does draw my eye into it, so it is easy to pick up a sight picture. I really like the design of the reticle. 

  Since the Lucid E7 is an enclosed sight, it does have some advantages. The most obvious is that the guts of the E7 are protected from dirt, water, oil, and other objects that might cause problems. If you have ever gotten water on the emitter of an open reflex sight, you know what advantage having a closed system does for you. If you happen to get something on the E7’s 21x18mm lens, you can just wipe it off. The enclosed system also puts all the controls on the outside where they are easy to get to. In the E7's case, the brightness up/down is on the left side and the battery compartment is on the right side. The windage adjustment is also on the right side. The elevation adjustment is on top, as one would expect. Both of these have positive click adjustments for easier use. However, they are small and need a small flathead screwdriver to adjust. I was pleasantly surprised with the adjustment clicks, being that they are so small.  

  I am pretty happy with how the Lucid E7 performed. It is a great little 1x reflex sight. I really only have one complaint. If you turn up the brightness on the M5 blue reticle, it blurs together for me. This is due to my astigmatism. So do not worry about the reticle being clear, unless you have bad eyes like me. Because the reticle has more in it then just a dot, that is why it is worse for me. HOWEVER, if I turn the brightness down a little, the reticle clears up nicely. Plus, due to the blue reticle, I can get a clear reticle at a lower brightness setting than if it were red in color. This really only plays a role if I am shooting at distant targets. Up close I just use the bright blue as a larger dot. Just put the reticle on the target and engage. I also like the size and weight of the E7. It is the perfect size for a lightweight AR pistol or SBR. Having the ACRO footprint also lends the E7 to be right at home on a handgun, if you were to choose that option. The E7 has been a great little reflex sight and has stood up to my abuse.

  Since the Lucid Optics E7 is the first blue colored reflex sight, it stands out against all the other ones. Yes, you will pay a few dollars more, but you get an actual reticle in a blue color, not just a red dot. The construction is nice and sturdy with easy to use controls. It has great battery life thanks to the “shake awake” feature. So if you are looking for a good enclosed style reflex sight, but with a blue twist, check out the Lucid Optics E7. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Blue illuminated reflex sight

Target Market:

Those wanting something different. Sight can easily be used for just about anything from handguns to rifles

Features, Benefits, and Specifications of this product:

  • Finish: Matte Black

  • Material: 7075 Aluminum

  • Magnification:  1x

  • Lens Diameter:  21mm x 18mm

  • Reticle: M5

  • Illumination Color:  Blue

  • Emitter Type:  Enclosed

  • Battery Life:  50,000 hours

  • Length:   1.78″

  • Weight:  2.65oz

  • Field of view: 60 ft @ 100 yds

  • Footprint:  Aimpoint ACRO

  • Mount:  Picatinny/ACRO adaptor mount included

  • Battery: CR2032

  • IPX7 Waterproof

  • Shake Awake

  • 90 MOA Windage and Elevation Adjustment

What other aesthetic options or finishes are available?

None

What others are saying?:

3 out 5 stars at OpticsPlanet.com  

Blurry for my eyes and sons eyes

I had trouble seeing the optic clearly and so did my son. My buddy had no issue seeing it. He doesn't wear glasses and neither does my son. I do. Was bummed. However I still hit the target. So far not a horrible optic, just wish I could see it clearly.

Link to other reviews:

Shooting News Weekly  

Price point:

MSRP = $299.99

Retail = $239.95 at OpticsPlanet.com   

I need it now! Availability:

Lucid Optics or Optics Planet

Our Rating:

Pros:

  • Blue reticle is easy on eyes

  • Reticle design is fast to pick up

  • Shake Awake

  • Acro footprint

  • Actual click adjustments

Cons:

  • May not be good for people with astigmatisms

  • MSRP is a little higher than other optics in this class 

Score: 7.50 Good

Favorite Link:  Lucid L7 1-6x24 review   

RITON 3 TACTIX 1-8 X 24 LPVO

RITON MAN

THE RITON 3 TACTIX 1-8 X 24 LPVO

  Up for review today is the RITON 3 Tactix LPVO 1-8 x 24 rifle scope. In the world we are in now, it is either red dots or LPVO on your rifle. Well I can’t tell you which way to go because I run both. What I can tell you is the LPVO that RITON makes is a good choice if you're looking for a mid tier rifle scope. Is it the best? No. Is it the worst? Not by a long shot. It has good and bad features that you have to choose what you like. 

  To start off with the 3 Tactix is solid, I would also say it is duty grade for sure. I dropped it on the ground and beat it back and forth around in the truck, on my body while on a sling and so on. It never lost zero. The mount they sent to me was one of their own and is a rock solid mount with a level built in the back bottom. I would assume this is for when you’re taking longer shots and have to keep the reticle level to play the wind. Or it could just be an aid when mounting the scope. This is a tactical scope that has all the features you would expect in a high dollar optic for twice the money. It has a patent pending dual throw lever for adjustment, capped turrets, 6 different brightness settings and is available in black or FDE. For some reason they sent me a black optic with an FDE mount, but that doesn’t matter to me. 

  Under the windage and elevation caps are zero resettable turrets. There are three different height throw levers and a flush mount one. Windage and elevation adjustment are ½ MOA. There are 6 levels of red illumination with an off position between each level. It features a fast focus eyepiece. They state it is 100% waterproof, fog proof  and rugged design ready for the toughest environments. I could not find a waterproof rating on the website or in the documentation so I am just going to take their word for it. 

  Mounting the optic was easy just like any other, just follow the directions and torque specs and you will be fine. The clicks on the dials were fantastic and probably some of the best I have turned. Once you have the scope zeroed at your preferred distance, you can loosen the screw and set the dial to zero and tighten it back down. 

  This Riton optic is a second focal plane which means the reticle stays the same at all levels of magnification. Second focal plane, or SFP, optics have the reticle behind the magnifying lens. The advantage is that the reticle always stays the same size. The disadvantage is that if you are going to use the holdovers that are listed in the manual you have to have the optic at max power. I use different power levels and keep a dope card taped to the stock of my rifles so I know where I am with that magnification. Just be mindful this is a capped turret optic, so if you want to dial for wind you have to take the caps off. 

  The reticle is a unique design to me, I have not used one like this before and it is easy to use. It can be a little busy at first. Once you learn what everything means you are good for elevation, windage and it also has a dot in the center that works well for close up work. The reticle is called an OT reticle, once you look at it you will understand. It has a broken circle that is 20 MOA in diameter with a 1 MOA dot in the center. After that you have a T, with the bottom of the T hanging out of the bottom of the circle. It has 4 vertical lines that run out from each side and bottom from the 10 MOA center out. Each line is 0.5 MOA wide, the distance between each line is 5 MOA and the lines are 5 MOA tall. Then there are horizontal lines in between each vertical line. There are 3 of these that are 3 MOA long and 0.5 MOA thick. So once you have all of this math figured out you are golden. I see it no different than people that use tree reticles and call wind and elevation on the fly with them. This is just something different that works.

  I mounted the 3 Tactix 1-8 on 2 different rifles and went to the range numerous times with both of them. I even used this optic in a Kevin Dixie rifle class. It definitely took some abuse that day. So far I am around 1500 rounds with this optic, out to distances of 200 yards. I mainly ran it at 50 yards and in. I ran it like a red dot in various light situations. The good thing about the illumination setting is that there is an off setting between each brightness setting. The optic never lost zero at all. I did my own little repeatability test with it at 100 yards. I took one shot that landed close to the center of the bullseyes. I then cranked over 10 clicks to the right and took a shot then I went 20 clicks to the left and took a shot. These out laying shots were almost in identical places. I then cranked back to my original setting and was within a ½ inch of my first shot.

   I am not going to bore you with all the details of the Riton 3 Tactix 1-8 LPVO. I will list this down below so you can read them or go to their website. I can tell you that this optic impressed me more during a training class and a competition than it did on the range. It is a little cluttered to me. But I am used to more simplified optics. So take that with a grain of salt. This optic might be right up your alley. I know it is on my go to battle rifle and will stay there until I find something better. Have I figured it all out? No, but I am still working on it. The glass is clear, the turrets are tactile, the lights are bright, and the scope mount is wonderful. I have used better optics but not for the money that this one offers. I like it, it works. Riton is not known for making cheap optics, so you know you're getting quality glass. I do not know anything about customer service but the folks at Shot Show 2024 were amazing when they talked to me about the scope. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Quality glass

Tactile turrets

Good price point

Great light transmission

Easy Click turrets

Great finish

Good clarity for the price

Target Market:

The average consumer that needs extra for their money

Will serve most people well without breaking the bank

Average working Joe

FEATURES, BENEFITS, AND SPECIFICATIONS OF THIS PRODUCT:

  • Magnification: 1-8

  • Parallax Adjustment: Fixed at 100 yards

  • Tube Diameter: 30mm

  • Objective Lens Diameter: 24mm

  • Focal Lens Position: Second Focal Plane

  • Lens Coating: Fully Multi-Coated, Full Wide Band, Waterproof Coated, Low Light Enhancement

  • Reticle: OT, Illuminated

  • Field of View at 100 yds: 105.8ft-13.1ft

  • Material: 6061-T6

  • Eye Relief: 3.5in/90mm

  • Exit Pupil: Low 7.5mm - High 3mm

  • Click Value at 100 yds/m: 1/2”

  • Adjustment Range: 182 MOA

  • Mounting Length: 6.75in/171mm

  • Length: 10.87in/276mm

  • Weight: 19.3oz/547g

  • Included Items: Flip Up Lens Covers, Lens Cloth, Allen Wrench

 What other aesthetic options or finishes are available?

FDE version

What others are saying?:

3 out of 5 stars at OpticsPlanet.com    

Not terrible for the price

I purchased this scope from an individual who "decided to go another direction" with their setup. Pros: Clear glass, seems well built(time will tell), reticle and illumination are crisp/clean and turrets are tactile and audible. Cons: The magnification throw is VERY stiff(may loosen up over time). The reticle isn't very intuitive, but will work for my needs. The biggest downside to this scope is what others have said, THE EYEBOX SUCKS. Anything past 5x your head/eye has to be in the 'sweet spot' or you'll lose it all to scope shadow. Also the owner of a Burris rt6, the box is much better on the rt6 compared to this and basically the same reticle as the X3 moa model. Long story short--a 1-8 that's only good to 6x is a 1-6. The glass on the Riton is better than the Burris(I think), but if you can't see through it, it doesn't matter. If you're considering this Riton, get the Burris rt6. I paid 200 for the Riton, so I don't feel cheated, but at retail prices, there are better options.

Link to other reviews:

The Truth About Guns

Outdoor Hub

Price point:

MSRP = $479.99

Retail = Same

I need it now! Availability:

Riton or Amazon   

Our Rating:

Pros:

  • Light weight

  • Clear glass for the price

  • Large turrets

  • Easy to mount

  • Good price point

  • Illumination is on point

Cons: 

  • The reticle can be cluttered at first

  • It is not Leupold quality glass

  • You have to adjust the diopter quite a bit

Score: 8.00 Great

Black Talon Tactical AR trigger

  The AR market is saturated with aftermarket triggers. If you want to stand out from the big names, you need to do something better and different. Black Talon Tactical has done just that with their Single Stage Calibrated Adjustable Drop In trigger. Yes it has a long name, but it really does describe the Black Talon Trigger quite well. They shipped me out their Improved Finger Position (IFP) profile trigger to try out. For the $180 price tag, I was not disappointed. 

  Black Talon Tactical’s drop in trigger is different in many ways. These differences are all good in my opinion. One, it has an adjustable trigger pull weight from 2-5 pounds. Two, this particular version uses the Improved Finger Position (IFP) trigger shoe that I’ll describe later. Lastly, the Black Talon triggers also have zero take up, very minimal break travel, and a tiny bit of overtravel.  

  When Black Talon Tactical says the trigger pull weight is adjustable, it is even more than that. As mentioned, the trigger’s pull weight is adjustable from 2.0 pounds to 5.0 pounds. I am pretty sure they specify the decimal point because the trigger has a precision adjustment scale on it. Black Talon Tactical also states that the trigger is calibrated to within 1 ounce of the marked adjusted trigger pull weight. Plus, the trigger pull weights are repeatable on the scale. The only noticeable drawback to the IFP trigger is that it must be removed to adjust the pull weight. To adjust the pull weight, just use the supplied allen wrench to turn the screw to the setting you want, it’s that easy. For a small fee you can send Black Talon Tactical a stripped lower receiver and they will modify it so that the trigger can be adjusted without removing it. I did not send in a receiver, so I can not tell you anything about the modification. I will testify to the fact that the adjustment is repeatable. I adjusted the trigger a few times, and then set it back to a 2.5 lb pull. My trigger pull gauge reads 2.5 lbs pretty much every time I check the trigger’s pull weight. 

  While Black Talon Tactical makes these triggers in a standard curved and flat trigger shoe, they also have something different. This different shoe is called the Improved Finger Position (IFP) profile. Essentially the IFP shoe is a flat trigger until you get down toward the tip. Then the trigger has a little curved section that is angled toward the shooter's finger. This little section is about 5/16 inch long. What it does is allow for really precision trigger manipulation. Yes, you can get a really precise feel out of it. The straight portion of the trigger is then used for normal or fast shooting. I thought the IFP trigger shoe was great. It works just as described. When I want precision shots, I just move my finger down to the bottom. When I want to go fast, I just use the flat section of the trigger as normal. And this trigger is fast.

  Installation of the Black Talon trigger is pretty standard. Remove the safety and old trigger. Slide the Black Talon trigger into position. Slide in the supplied anti-walk pins. Tighten anti-walk pin screws. Install safety. Now for the important step: tighten the two rear screws that put upward pressure on the trigger housing. If these screws are not tightened properly, the trigger may not work correctly. I originally had the trigger in a polymer AR lower and had a few failure to fire’s. My best guess is that the polymer flexed enough to cause problems, since those two rear screws couldn’t get tight. When I installed it in a standard aluminum AR lower receiver, those problems stopped. It has over 500 rounds in the aluminum AR receiver and has run flawlessly for over 500 rounds. All the necessary allen wrenches are also included so there is no need to run around trying to find some.

  My favorite aspect of the Black Talon Tactical Single Stage Calibrated Adjustable Drop In trigger is the actual pull, or lack thereof. The actual amount of movement in the trigger, to fire the AR, is minimal. Black talon states 0.5 mm, which is 0.020“. I just know that when I tested it, it was less than 0.040”. The break on the Black Talon Tactical trigger is also fantastic. I wouldn’t say glass rod, even if it is close, but I will say it has a super short tactile feel to it. Overtravel is stated at 1.25mm, or 0.050” maximum. I don’t think the one I have is that long. I will mention that the overtravel feels shorter because it is not the normal free travel that most triggers have. Instead it feels kind of spongy, but it is so short that maybe I am just feeling the end of the total movement. Either way, the overtravel is not really even noticeable. The reset on the trigger is good and a little forceful. The reset is a little better than most drop-in triggers in this price range. Click here for a short video of the trigger movement. 

  I’ve put quite a few rounds through the Black Talon Tactical trigger. It is just so much fun to use. I have another trigger that feels a bunch like this one. The difference is that the Black Talon trigger is adjustable. Plus the IFP trigger shoe is unique in how you can go from fast to precision easily. When I was running a bunch of bill drills with the IFP trigger, I could get 0.10 second splits. 0.12 seconds were really common. If you want a really fast trigger, this may be one to look at. I probably wouldn’t recommend this trigger to a novice shooter. The break is just too short and quick in my opinion. But, the nice thing about this trigger is that you can set the pull weight up to 5 pounds, then as you get more proficient with it, you can turn the pull weight down. 

  If you can not tell, I became a big fan of Black Talon Tactical’s Single stage trigger. It really does everything an aftermarket single stage AR trigger should do. It has adjustable pull weight, a super short trigger pull, and a great trigger break. You also get the IFP trigger shoe for more precision shots. Go check out the Calibrated Adjustable Drop in Single Stage Trigger from Black Talon Tactical, it is worth a look.

Firearms Insider Reviews - Key Points

Claim to Fame:

Single stage adjustable AR trigger 

Target Market:

AR users who want a super fast, adjustable pull weight, trigger

Features, Benefits, and Specifications of this product:

  • Improved Finger Position (IFP) trigger shoe

  • Adjustable pull weight between 2.0 - 5.0 lbs

  • Repeatable adjustments to within 1 ounce

  • Zero take up

  • 0.5 mm break

  • 1.25mm max over-travel

  • Cartridge style drop in housing

  • A2 tool steel construction

  • Anti-walk pins included

  • Lifetime warranty

What other aesthetic options or finishes are available?

Curved bow and Straight, all options in fixed pull weights too    

What others are saying?:

5 out of 5 stars at Opticsplanet.com   

Love this trigger

I'm always looking for new/different products to upgrade my rifles and this is my favorite recent discovery. I love that it's adjustable and I set the weight at about 2.5 lbs and it is amazing! The IFP design is great as it gives you multiple positions for finger placement and it makes it easier to rapid fire. The hammer design on this trigger is unique and the housing feels extremely durable.

Overall I would recommend this trigger to anyone looking for something new and better.

Link to other reviews:

None found as of publishing

Price point:

MSRP = $179.99

Retail = $161.99 at Optics Planet    

I need it now! Availability:

Black Talon Tactical or Optics Planet 

Our Rating:

Pros:

  • Super short trigger break

  • Good reset

  • Adjustable pull weight

  • Super fast to shoot

  • Improved Finger Position (IFP) profile trigger shoe

  • Precision shooting option due to the IFP

  • Drop in design

Cons:

  • Might not be the greatest trigger for novice shooters

  • Must take the trigger out to adjust

Score: 9.00 Amazing

Favorite Link:  Magne-Tech Rigel II review

Primary Arms GLx RS-15

  When it comes to mini reflex red dot sights, everyone seems to have one or more in their catalog. Primary Arms has them also. The difference is that Primary Arms has broken the “same old dot” mold by designing and using an innovative reticle called the ACSS Vulcan. They have put this reticle in their brand new GLx RS-15 mini reflex sight. I tested the GLx RS-15 on a shotgun and a pistol just to see how it worked. 

  For everyday purposes, the Primary Arms GLx RS-15 is a reflex red dot sight. That is only the beginning of the story. First, the RS-15 is in Primary Arms’ GLx line. The GLx line is Primary Arms’ mid-tier optics line. That means you get a higher class of technology and materials at a fair price. The RS-15 comes in at $359 dollars, which isn’t bad when you count how many features are in it. In this line you tend to get new and innovative reticles and sharper glass, leading to a crisper dot. It also has the ACSS Vulcan reticle. Which I will explain, at length, later. Some of the other features it has include: A top load battery, 7075 aluminum housing, and Autolive technology, just to name a few.

Camera is closer to optic, to give an almost complete view of the reticle

  The GLx RS-15’s ACSS Vulcan reticle is an innovative design. For simple explanation, it is essentially a 3 MOA red dot. Then it has an outer ring around that dot. That outer ring is 250 MOA. So what happens is that when you hold the RS-15 at arms length, the outer ring is not seen if the dot is in the center of the window. If you move the sight up/down or left/right, the outer circle starts to come into the window's view. This allows the shooter to see which way the gun needs to move, so you can get back to having the dot centered. Take for instance you see a curved line in the right or left side of the window. Just move the muzzle of the firearm toward the direction of that curved line, and you should then see the aiming dot. Same with up or down. If the curved line is on top, move the muzzle up, if it is toward the bottom of the window, move the muzzle down. The ACSS Vulcan reticle is a great reticle to learn how to shoot red dots on pistols. Yes, it even helps out seasoned shooters like myself. After you use the Vulcan reticle for a while, and want to try just a normal dot sight picture, it has an option to turn off the outer ring so that it is just the 3 MOA dot. Just hold down the brightness down button for 3 seconds and it will cycle between the two modes. I’ve been really impressed with the ACSS Vulcan reticle.

  Primary Arms’ Autolive function is also built into the GLx RS-15. However, it works a little differently than their normal Autolive version. After around 10 seconds of no movement, the RS-15 shuts off the 250 MOA ring and leaves just the 3 MOA dot. Then after around 4 minutes of no movement, it shuts down the dot reticle. Have no fears, just barely move the RS-15 and the full Vulcan reticle will come back on. This helps aid in longer battery life. Battery life is pretty good. Primary Arms states 25,000 plus hours on medium setting with just the dot, and around 5,000 hours with the Vulcan reticle. It may sound substantially less, but 5000 hours is still 200 days of continuous “on.” And with the Autolive, it will not be continually on for 200 days. I’m a big fan of Autolive, or any of the auto on/off systems. 

   Mounting the GLx RS-15 might lead to some hassles. The RS-15 uses a C-More mounting footprint. Trying to find an actual C-More footprint optics cut is not easy. Slides with these optics cuts are available, but not nearly as prevalent as a RMR footprint cut. However, If you have a slide cut for a Delta Point Pro (DPP), and it doesn’t have the recoil lug bosses built in, the RS-15 will mount right up. This is because the screw hole spacing is the same for a DPP or a C-More footprint. This mounting footprint is the GLX RS-15’s biggest flaw. First I mounted the RS-15 up to a shotgun, with the help of a Warne Red-dot Shotgun Rib Reflex Mount. On a side note, the Warne mount is fantastic. It mounts to the shotgun's rib, securely, and has options for just about any red dot footprint imaginable. I then proceeded to put it on a P320 with a Grey Ghost Precision (GGP) slide. I did this because the GGP slide is cut for a DPP and doesn't have any recoil bosses to make the RS-15 not bolt up. That is where it stays. Not because it didn’t work on the shotgun, but because I like it better on the pistol.

  Besides the ACSS Vulcan reticle and Autolive functionality, the GLx RS-15 has some other great features. First up is the actual window size, which is 26x20mm’s. The window size is decently large and seemed easy for me to get on target with. Next is the RS-15’s top load CR2032 battery. Which also comes with a combo wrench to make removing the battery cover easy. The 7075 aluminum housing is stronger than comparable sights that use 6061 aluminum. Probably most notable, is that the RS-15 has 0.5 MOA click adjustments. Almost all mini reflex sights use a 1 MOA adjustment, and some do not have clicks. Lastly, the buttons on the right side control brightness. It has 13 brightness settings, 3 of which are night vision compatible. The top brightness settings are super bright. 

  The GLx RS-15 is one of the clearest red dots I have used. The clarity is just amazing. I say this because with my astigmatism, red dot’s are usually a little starred out for me, making them a little blurry. Not the RS-15. I don’t know what Primary Arms did to get this red dot so clear, but I like it. Maybe it is the very slightly tinted blue lens. Either way, it works. In fact, it is the first time, in a while, that I can turn the brightness all the way up and not have the dot look distorted. 

  I mentioned running the GLx RS-15 on a shotgun. I wanted to try out a non conventional use for it. I really liked shooting trap with the RS-15. However, the 250 MOA outer ring didn’t really do anything for the shotgun. Something about looking down a long gun barrel that tends to line up the sight. I am not sure if it helped me shoot trap better, but I see how having something like the RS-15 on a field shotgun could be immensely useful. The dot just made aiming at a moving target easier.

  After the shotgun try out, I proceeded to go conventional. Using the GLx RS-15 on a handgun is where it really shines. This is where the ACSS Vulcan reticle can be used to its full potential. I ran some drills with the RS-15 to test it out. I am a little faster, shot to shot, under recoil thanks to the Vulcan reticle. One because it is so clear, and the other because the reticle just helps you find the dot faster. This is definitely a more useful sight on a handgun.

  If you are looking into a red dot that can help you shoot better, the Primary Arms GLx RS-15 might be a good option. Partly due to its innovative ACSS Vulcan reticle. For new red dot shooters, it helps you find the dot and get used to it. For seasoned shooters, it helps you to find the dot faster. The GLx RS-15 even works for non-conventional uses like a shotgun. I have a hard time deciding what would be my favorite feature of the RS-15. Is it the Vulcan reticle, or the sights' clarity? Go check out the Primary Arms GLx RS-15 and see for yourself.

Firearms Insider Reviews - Key Points

Claim to Fame:

Quality red dot with the ACSS Vulcan reticle

Target Market:

Anyone wanting a quality red dot, but also those who will benefit from the ACSS Vulcan reticle

Features, Benefits, and Specifications of this product:

  • 7075 Aluminum construction

  • Hardcoat anodized black

  • Top loading CR2032 battery compartment

  • 5,000 Hour battery life with full reticle on medium setting

  • 25,000+ Hour Battery life with dot reticle on medium setting

  • Side mounted buttons for brightness (13 settings with 3 night vision)

  • Red Dot Bright® ACSS Vulcan Dot reticle (3 MOA center dot with 250 MOA outer circle)

  • Multi-reticle select can be changed between circle/dot and just the dot

  • 0.5 MOA windage and elevation adjustments

  • Autolive® functionality

  • Waterproof and shockproof construction

  • Multicoated lens

  • C-More footprint which is very similar to the Delta Point Pro footprint

  • Includes GLOCK MOS compatible mounting plate

  • Length: 1.84"

  • Weight: 1.11 oz.

  • Aperture diameter: 26x20mm

  • Lifetime warranty

What other aesthetic options or finishes are available?

Dot only version

What others are saying?:

5 out of 5 stars at primaryarms.com

SUPERB RDO WITH DIRECT FITMENT ON SIG PRO-CUT SLIDE

This optic is my third with the ACSS Vulcan reticle, but first PA-branded open reflex (others are HS 507k & 507c). I've become a real believer in this reticle, in either red or green.

Target and sight acquisition are super-fast and consistent -- intuitive, too, once a little muscle memory is achieved. For me, it also had a minimal learning curve, with the added benefit of presentation depth feedback, making it simple to verify the gun is in the correct position for each round fired.

Too far away, the 250 MOA outer ring disappears. In too close, the outer ring circles the 3 MOA dot. At just right, the outer ring guides the dot to perfect target alignment. It's a system beneficial to both experienced shooters and new RDO users, and it just plain works.

This optic, like the HS RDOs, checks all the right feature boxes too, including shake awake, top-mount battery and side-mount brightness.

It’s a real winner. A+ performance and value.

Link to other reviews:

Nothing found as of publishing 

Price point:

MSRP = $359.99

Retail = Same

I need it now! Availability:

Primary Arms

Our Rating: 

Pros:

  • ACSS Vulcan reticle

  • Clarity

  • Autolive motion activation

  • Window Size

Cons:

  • C-More mounting footprint

  • Slightly higher price when compared to similar reticles in red dots

Score: 7.50 Good

Favorite Link:  Primary Arms SLx 1x prism review  

Rost Martin RM1C

Ammo supplied by Target Barn

  A new pistol manufacturer is in town and they hit the streets hard. They are Rost Martin, and if you have not heard of them, you soon will. As of writing, their premier offering is the Rost Martin RM1C pistol in 9mm. The RM1C is a compact pistol, think G19 size for reference. This pistol comes packed with features at an affordable price. Let us find out what makes the RM1C so good.

  This new Rost Martin compact pistol comes ready to go. In the box with the RM1C are 2 magazines. One is a flush fit 15 round magazine. The second one is a 17 round extended one. Both have steel bodies. The 17 round looks like the 15 round magazine but with just a +2 extension. Extra magazines are only $24.50! Yeah, $25 bucks a piece for extra mags. Thank you Rost Martin for making affordable steel magazines. Also in the box is a plate to mount a RMR footprint optic. Plates for different foot print optics are available on the Rost Martin website. Lastly, there are 2 extra backstraps. A small and large one. The RM1C comes equipped with the medium size backstrap. The medium sized one seemed to fit a lot of different sized hands, mine included. 

  Now that we are off to a good start, I will start with the top side of the RM1C, the slide. The slide is constructed from nitrocarburized steel and has a deep black Tenifer finish. On top are non-glare serrations cut from the front to back. These are there to help reduce glare off of the top of the slide. They probably helped and I did not notice any distracting glare when shooting the RM1C. Another quick mention is that the RM1C is cut for Rost Martin’s optic plate. It comes with a plastic cover plate installed. The cover plate also has those non-glare serrations. I used the supplied RMR plate to mount an optic. Rost Martin’s optic plate centers up on a raised boss and locks into the slide at the rear. This system works out well. I have not had any problems with the RMR mounting plate or system. Also on the top are the iron sights. The factory sights are a front post with a white dot, and a serrated U-notch rear. The sights work, but I thought they were a little small and hard to pick up quickly. However, both front and rear sights are dovetailed in using a Springfield XD sight cut. So I proceeded to mount a set of suppressor height sights from XS sights. On the side of the slide are deeply cut, front and rear, slide serrations. These slide serrations work extremely well and look even better. Around the back of the slide is the end cover plate. It is also serrated to reduce glare. More important is that in the center of the back plate is a red safety indicator that tells you when the striker is in the firing position. It is basically the end of the striker, but it is still a nice feature. 

  It is time to get into the RM1C’s frame or grip. The frame comes in 3 different colors: Black, Stone Gray, and FDE. I chose the Stone Gray color. Probably the most notable factor of the frame is its grip texture. I just call it a sand paper texture, but Rost Martin calls it “Responsive Grip Texturing” or RGT for short. The RGT is a “proprietary graduated laser stippling designed to respond, or “grip back,” to the amount of grip pressure exerted by the shooter for an incredibly secure yet comfortable fit”. The texture feels smoothish at first, but as you use the gun, it becomes apparent that it gives you a better grip than you initially thought. I liked the grip texture of the RM1C. Rost Martin also textured the front sides of the frame, just above the trigger guard, where one would rest their thumbs. Rost Martin also designed the RM1C to have a large trigger guard. I really like this for a defensive handgun since one never knows when it might be needed, and you might have gloves on. Next feature is a front picatinny rail for mounting lights or whatever. I’m glad it is a standard pic rail and not some proprietary one. One of my favorite things about the RM1C’s frame is its width. It has a very thin profile. But unlike some “thin” pistols, the ergonomics of the Rost Martin are fantastic. The RM1C is noticeably thinner than a G19 or my Polymer80 19’s. The pistol is super comfortable in the hand.

  I would be remiss if I did not mention the trigger. The Rost Martin RM1C has one of the best striker fired triggers I have felt in a while. It has a short smooth take up, a little under ¼ inch. Followed by a crisp 5 pound break. With very little overtravel. The reset is forceful and tactile. This trigger makes the RM1C easy to shoot. Rost Martin uses a flat faced trigger design to give the user a good feel. Yes, the trigger still has that common flipper safety in the center, but it isn’t very noticeable. Especially since the face of the trigger is pretty wide. When I first saw the RM1C, I didn’t know what to think about the trigger, at least visually. But after using it, I almost immediately started liking it. I really like the overall trigger feel of the RM1C.

  The RM1C is a full ambidextrous (ambi) firearm. When I say full ambi, I actually mean full ambi. The slide release is located on both sides of the frame. It is also in a great location. Not back enough that you will inadvertently hold it down, but not too far forward to where you can not reach it easily. I like the slide release position. The magazine release is also full ambi. Not reversible like other manufacturers that claim “ambi”. Just push either side to drop the magazine free. This magazine release is kind of a teardrop shape. It is also radiused so that it doesn’t snag on anything. I would like an option for a slightly raised version, but the stock magazine release functions flawlessly.

  I have been using the Rost Martin a lot. It has over 1000 rounds of various 9mm ammunition through it. Including 700 rounds supplied by Target Barn - 500 rounds of American Eagle 115 grain and 200 rounds of PMC 124 grain. All of the Target Barn supplied ammo ran flawlessly. As did the various 300 plus rounds of cheap ammo I fed it. I also ran a magazine of some old Speer Gold Dot +P’s I had lying around. The RM1C ate up every ammo I fed it to include: 115’s, 124’s, 147’s, and even some 165 grain subsonics. Did I mention that I also didn’t clean the gun? Yeah, there is that. I also only oiled the gun initially when it came out of the box. I guess I should go clean and oil the RM1C now. The pistol had about 450 rounds through it before I mounted up a red dot. All the rest were with a red dot mounted to the slide. 

  I just recently started carrying the RM1C around. Mainly because I did not have a good inside the waistband holster. That changed thanks to Werkz holsters. The RM1C carries really nice. It doesn’t feel as heavy as my glockish 19’s. Plus the rounded corners of the RM1C really smooth out its outline. Especially under just a T-shirt. There are plenty of good holster makers making RM1C holsters. Rost Martin even listed 3 or 4 when the pistol first came out. It is always nice when a new manufacturer has holster support from day 1.

  The RM1C is a fantastic pistol. I really like shooting it. The performance has been astonishing. I always try to run review items in some sort of shooting match, if I can. So I ran the RM1C in a steel challenge match before I put an optic on it. This is when I realized that I didn’t like the small sights. Of course, the RM1C ran the match without any hiccups, which I can’t say about the shooter. When shooting the RM1C, it feels good. Recoil is controllable and the grip texture doesn’t seem to be overly aggressive. In fact, some may say it needs more texture. But since I think the RM1C is a “do all” pistol, which includes carry, I really like the grip texture. Everything on the RM1C exudes quality. It has top notch machining on the slide. The frame doesn’t have any molding marks. It is just a beautiful pistol. I also got usable accuracy out of the RM1C. At 25 yards, off hand, I would get around 3-4 inch 5 shot groups. It did not seem to care what ammo I ran through it either, the groups all seemed about the same. If you put it in a rest, I would bet the accuracy would be fantastic. If you have not figured it out by now, the Rost Martin RM1C is a great pistol right out of the box.

  Rost Martin is going to be making waves in the handgun market. Their entry into the handgun market is a solid buy. The RM1C will only set you back about $450 dollars, which is really a fantastic deal for all the features you get. The RM1C has holster support and with its standard picatinny rail, will take almost any light you decide to install on it. If you are looking for a pistol that hits above its price range, definitely take a look at the Rost Martin RM1C. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Compact 9mm handgun with a decent feature set

Target Market:

Concealed carry, Home Defense, Target shooting, Personal Protection, or anyone just wanting a compact handgun

Features, Benefits, and Specifications of this product:

  • GRIP WIDTH: 1.1"

  • LENGTH: 7.1"

  • SLIDE: Nitrocarburized steel slide

  • BARREL: 4" hammer forged in 9mm

  • SIGHTS: Rear: Black serrated Front: White dot - Springfield XD/XDM compatible 

  • MAGAZINES: (1) 15 - Round (1) 17 - Round

  • WEIGHT: 21.1 oz. with flush mag 21.5 oz. with extended mag

  • TRIGGER: 5 pounds, Double Action Striker (DAS)

  • HEIGHT: 5.0" with flush mag 5.5" with extended mag

  • Optics ready, RMR optics plate included with the gun - other plates available through the website

  • 3 Back Straps included

  • Ambidextrous Magazine release and slide stop 

What other aesthetic options or finishes are available?

Black or Flat Dark Earth

What others are saying?:

TODD K at Guns.com  

Excellent value and quality

Excellent value and quality, I would highly recommend this firearm. You can't find another pistol in this price range that's the same quality and has the same features.

Link to other reviews:

Chris from the 740  

RTT: Guns & Gear   

GunsandAmmo.com   

Price point:

MSRP = $459.00

Retail = Around $400    

I need it now! Availability:

Guns.com

gun.deals

or your local FFL

Our Rating:

Pros:

  • Trigger

  • Ergonomics

  • Full ambidextrous

  • Comes Optics Ready

  • Flawless performance

Cons:

  • Small Iron sights

Score: 8.50 Great

Favorite Link:  Viridian RFX 35 review 

Foxtrot Mike - Mike15 gen 2

200 rounds of ammunition was supplied by Target Barn for the review

  AR pistols have become very commonplace. Foxtrot Mike has designed their pistols and rifles to be a little different, but in a good way. They use an integrated bufferless recoil system in their Gen II AR’s. Foxtrot Mike sent me a 12.5 inch Mike-15 pistol with a few added in options. So let’s get into what advantages this Mike-15 has to offer.

  When you first look at the Mike-15 Gen II, it looks very AR15ish. That is because most of it is. The lower receiver is Foxtrot Mike’s standard AR15 billet lower. But installed in the lower is a rear picatinny mount that also doubles as the bolt stop. The upper receiver system is where the difference is. Yes, it uses a standard AR barrel assembly and is still direct impingement. Because the Mike-15 is a bufferless system, the bolt carrier is different. As is the self contained recoil system that is placed above the bolt carrier, not behind like in a standard AR. This does make the upper about a quarter inch taller than your standard AR. The Mike-15 also uses a forward charging handle. All of these work very well together.

  As mentioned, the Foxtrot Mike, Mike-15 lower receiver is billet. This means that it is machined from a solid block of aluminum, not from a forging. This allows Foxtrot Mike to add in some different features. One of those is an oversized built-in trigger guard. This guard also has a slot in the bottom of it. I don’t know if it is for weight savings, or if it is for something else, but it looks nice. Foxtrot Mike also machines in a radiused 3 dimensional magazine well. This is a pretty nice feature to aid in reloading the rifle/pistol, even if you can see a few light machine marks in the magwell. Some other advanced features are: a screw in bolt catch pin, threaded and set screwed spring for the rear takedown pin, a ball detent for the safety with a set screw to hold it in (normal style spring and detent work also), and a screw for tightening the upper to lower fit. This Mike-15 also came with an upgraded Hiperfire trigger and an ambidextrous safety selector. The safety selector came as a 90 degree throw, but can be switched to a 45 degree, which I did as I like short throw safety levers. The optional Hiperfire Eclipse trigger is fantastic and has a pull weight of 2.5 pounds. The Hiperfire is not listed as an option on the website, but contact them and they will let you know how much extra it adds to the price. I also have a stripped Mike-15 lower for a different project, this is partly why I know about all those extras. I should also mention that the rear picatinny rail installs into the buffer tube threads and has the recoil bumper attached in it. It also has a QD slot at the bottom of the rail, so if a brace is not attached, a sling can be.

  The Upper receiver of the Foxtrot Mike is really where the huge differences are in this pistol, and their rifles. To start with, the upper receiver contains the recoil system. It is housed above the bolt. This recoil system consists of a dual spring and guide rod. The guide rod also goes through the top part of the bolt carrier. This allows the bolt carrier to push against the recoil system. The Mike-15 then uses a standard AR bolt assembly, but not a standard carrier. Because of this system, the receiver is about a ¼ inch taller than a normal AR’s receiver. The extra ¼ inch can make optics sit a little higher. This doesn’t cause any problems on the pistol version, but on a rifle, your optic may need a slightly lower mount. Foxtrot’s upper receiver does not have a forward assist, but does have a shell deflector. The Mike-15 gen II still uses a gas impingement system, so no differences over a standard AR in that respect. Except that the gas block is pinned, not set screwed or clamped. Foxtrot Mike then installs a 4150 barrel. This one is 12.5 inches with a mid length gas system. Because of the higher receiver height, a M-Lok rail that matches the height of the upper is installed. This handguard measures 11.75 inches, so it comes up flush with the muzzle brake. Depending on the rifle or pistol you order, the handguard length will vary. Lastly, Foxtrot Mike put a nice little 4 port compensator on this pistol. The comp works better than I was expecting it to.

  Operation of the Mike-15 gen II is a little different then a standard AR15. Instead of using a rear charging handle, Foxtrot Mike designed a forward charging handle that is in the upper part of the handguard. The charging handle is basically in the part of the handguard that is taller, so it doesn’t affect the M-Lok slots or get in the way. You can set this charging handle up to be either right or left charging. The charging handle DOES NOT reciprocate. However, it can be angled either slightly up, or slightly down, depending on how you have it configured. It comes curved up on the left side of the firearm. A folding lever is also available from Foxtrot Mike. The folding lever folds out of the way against the upper, for a more streamlined charging handle.

  Maintenance on the Mike-15 gen II is also a little different. Because of the self contained recoil system, you can not just pull the bolt out like a standard AR. On the top rear of the upper, there is a little square plug with a hole in it, located where the charging handle on a regular AR would be. One must use a small punch, or something, and push down the recoil spring assembly. Then slide the plug down. Watch out for lift off of that spring, as it can go flying. Then just pull the recoil spring assembly out, tip the gun back, and the bolt carrier should slide right out. All the other maintenance stuff is pretty similar to what a standard AR is.

  The Mike-15 pistols come in a variety of options. Some of those are barrel length and different colors. These pistols can be had in the picatinny rail version. Meaning they only have the pic rail on the rear of the receiver. Or you can get them with a folding SBA3 brace. I'd opt for the folder. The Mike-15 12.5 inch they sent me had an A3 Tactical folding brace with an A3 Steady Brace. These braces are top tier and work great. Plus they are super lightweight. If you want one of these as an add-on to your Mike-15, just ask Foxtrot Mike Products to see what they can do for you. The A3 brace folds to the left side of the Mike-15. Because the Mike-15 uses the forward charging handle, the brace does not get in the way of manipulating the firearm. Yes, of course the Mike-15 will fire while the brace is folded because of the self contained recoil system. 

  The Mike-15 that they sent was pretty solid. I’ve run a bunch of bill drills with it, along with other stuff. Target Barn supplied some 5.56 to help with the review: 100rds of Winchester 5.56 55gr M193 and 100rds of PMC 5.56 55gr. The Mike-15 currently has over 500 rounds through it. I did run into a problem with the recoil system after around 150 rounds. The springs were binding up and wouldn’t allow the bolt to go rearward all the way. I contacted Foxtrot Mike and they sent the “new” style buffer springs and guide rod. I literally had them the next day! Somehow the “old” style guide rod had been installed in this Mike-15. It has run flat out since with zero malfunctions since the initial problem. During my conversation with Foxtrot Mike, they also told me that they have a buffer tube spacer that plugs the buffer tube in case you want to run the Gen II uppers on a standard AR. They sent me one, so I tried it. The Gen II Mike-15 upper ran fine on a standard AR lower with that buffer tube spacer. One thing to mention is that the Mike-15 uses a different manual of arms, kind of. Because of the forward charging handle, one needs to readjust a little. Is this a bad thing? I don’t think so, but I thought it needed mentioning. When it comes to that manual of arms, the Mike-15 also seems to take a little more muscle power to manually cycle the bolt. Probably a non-issue for most. Watch a short clip of how it runs HERE.

  There are a few aspects of the Mike-15 that I really like. The first is the folding brace. I really liked this addition. One, because it folds and makes the Mike-15 really compact. Two, because it has M-lok slots in the arm. Having M-lok allows me to install a QD socket so I can run a sling easily. The next aspect I like is the weight. It weighs 5.6 pounds on my scale, and that is with the Lucid E7 blue-dot optic and the brace. When it comes to performance, the Mike-15 can hold its own. Being only a 12.5 inch barrel, I do shoot it slightly slower than a 16 inch barreled AR, but it is still fast. The Hiperfire trigger helps with the speed also. It is a very nice trigger upgrade. Lastly, I really like the self contained buffer system as it makes the Mike-15 pistol something you can shoot with the brace folded. I’d say the performance of the Mike-15 is above par for the price you pay.

  Foxtrot Mike designs their products for the everyday user. You get a high quality product for not a ton of cash. The Mike-15 Gen II pistols start at $699 MSRP and work their way up from there, depending on options of course. If you are looking for a truly foldable ARish pistol or rifle, the quality you get from Foxtrot Mike is top notch. You can check them out over at fm-products.com.

Firearms Insider Reviews - Key Points

Claim to Fame:

Bufferless AR style rifle or pistol

Target Market:

Those wanting a non conventional AR that has the advantage of not having a buffer tube.

Features, Benefits, and Specifications of this product:

  • CALIBER: .223 WYLDE

  • OPERATING SYSTEM: DIRECT IMPINGEMENT

  • BARREL LENGTH: 12.5"

  • BARREL TWIST: 1:8

  • BARREL MATERIAL: 41V50 PREMIUM MATCH GRADE 41v50 BARREL, VACUUM STRESS RELIEVED, MELONITE COATED WITH A BURNISHED CHAMBER

  • GAS SYSTEM: MIDLENGTH

  • GAS BLOCK: 0.625" NON-ADJUSTABLE

  • UPPER RECEIVER: BILLET AIRCRAFT ALUMINUM TYPE III HARD BLACK ANODIZING 

  • LOWER RECEIVER:  BILLET AIRCRAFT ALUMINUM TYPE III HARD BLACK ANODIZING 

  • HANDGUARD: 11.75" M-LOK FREE FLOAT TYPE III HARD BLACK ANODIZING

  • CHARGING HANDLE: 4 POSITION NON-RECIPROCATING FRONT CHARGING HANDLE

  • PISTOL GRIP: THRIL

  • BUFFER LESS  

  • LENGTH (INCHES): 22"

  • WEIGHT (LBS): 4.7 without brace or optic

What other aesthetic options or finishes are available?

Various lengths, rifle options, etc.

What others are saying?:

5 out 5 stars at Brownells - yes it’s for the rifle version, but it is still close   

One of my favorites

I purchased the 16" as well as the 11.5" pistol version. I shot the 16" primarily and was able to zero at 100y and hit targets at 500y without issue. A bit more fine tuning with my scope could yield a bit more in its capability. Some things to note about the rifle: I had some issues with the first round in a magazine going into battery and having light primer strikes that were rectified through break-in. After a couple magazines, I had zero errors. The biggest issue I had was getting proper eye level with my sight. Be aware the Zhukov stock and the folding, mounting system sits 0.25" lower than a standard AR. You may have to buy the $15 0.25 Magpul AK Riser to get the proper eye line. I paired my 30mm LVPO with a low mount, cantilever scope mount. In all, it only cost an additional $50, but I wish there were a way to have the stock sit at the same level as a buffer tube would. This is information I wish had been noted in reviews/videos before purchasing the rifle. Am I happy with my FM-15?Yes, it's probably my favorite AR long gun. Would the sight-line information have changed my decision to buy? Maybe, but ultimately I'm happy to own such a unique rifle. Time will tell if I enjoy the pistol length version as much as the 16".Though, I do hope Foxtrot Mike develops a 300BLK, short barreled upper of the same style.

Link to other reviews:

Tiberious Gib on YouTube   

Pew Pew Tactical   

Price point:

MSRP = $699.00 +

As tested = Approximately $1125

Retail = Same

I need it now! Availability:

Foxtrot Mike or Brownells

Our Rating:

Pros:

  • Lightweight

  • Folding brace

  • Self contained recoil system

  • Pinned gas block

  • 3D magwell

Cons:

  • Manual of Arms is slightly different 

  • Harder to charge the firearm when compared to an AR

Score:  8.00 Great

Favorite Link:  Gforce Arms Rapture review

Vosteed ANKYLO

Written by: Casey Kienzle

  I received Vosteed’s new knife, the Ankylo, and it’s truly a fine knife! This knife features an all new lock system called the V-anchor lock. Which is an incredible new locking system. So let’s dive in and see what makes this knife so great.

The handle

  The Ankylo’s handle is made from 6061 Aerospace Grade Aluminum. I personally really like this handle because of the grenade pattern texture and because of the handle shape. It makes it really easy to get a good grasp on the knife and hold it comfortably. Plus, it makes me feel like I have really good control over the knife. There is amazing jimping on the back of the blade and runs along some of the spine of the handle, which definitely helps with that control as well. On the inside of the handle are machined weight relief pockets. These pockets are there to reduce user fatigue. This gives the knife a good balanced feel. For carrying the Ankylo around all day, Vosteed added a deep carry pocket clip.

The lock 

  The Ankylo features Vosteeds new V-anchor button lock. It is a pretty fascinating design. There is an anchor plate and a magnetic connector that will attract, and push, the button from different directions. The pivot button will become recessed even if the lock is not engaged, that way the button will not be accidentally pushed. What that does is give the lock an integrated fail safe system. The anchor plate for the lock is also spring loaded, which allows it to quickly move into place. The anchor plate is milled from a 5mm thick piece of steel, giving it lots of strength. I really like this lock, it feels incredibly secure when the blade is opened and the lock is engaged. 

Opening

  There are 4 different ways to open the Vosteed Ankylo. Thumbhole, front flipper, back flipper and an easy to use button. I personally really like that because sometimes your hand may be in a position where you need to open the blade differently and you can’t use the flipper on the back. So it’s really handy to have the 3 other ways to open it. When I first started using this knife, I noticed that it has a really smooth opening. And that is due to the larger sized bearing Vosteed uses in this knife. Other folding knives use a smaller sized bearing. Since the Ankylo uses that larger bearing, I notice that it has a much smoother opening. 

The blade

  One of my favorite parts of the Ankylo is the Elmax reverse tanto style blade. The blade material is Bohler Elmax, which is one of the toughest high end stainless steel you can get. It compares to S30V. Elmax also has better wear resistance than S30V, meaning that this blade is really durable and stays sharp for a long time! I can definitely see that with all the boxes, tape and other various things I have been cutting with the knife. They designed the blade belly to be really great for multitasking. Because of that, it can easily cut and pierce through lots of things. That’s what you want in a knife, right!!

Summary

  This is my very first Vosteed knife, and I absolutely love the Ankylo! It feels very solid, it’s incredibly sharp and I absolutely love the button lock. The design of the new Vanchor lock is really great and feels very secure when it’s engaged. This is truly one of the best knives I’ve ever used. If you are looking for a great everyday carry knife that is tough and stands out from other knives, then the Vosteed Ankylo is the knife for you!

Firearms Insider Reviews - Key Points

Claim to Fame:

Rugged EDC folder with a robust new locking system

Target Market:

Anyone wanting a high quality, sturdy, folding EDC knife

Features, Benefits, and Specifications of this product:

  •  Blade Length: 3.18" | 80.90 mm

  •  Overall Length: 7.75" | 196.90 mm

  •  Blade Width: 1.22" | 31.00 mm

  •  Blade Thickness: 0.134" | 3.40 mm

  •  Blade Material: Elmax

  •  Blade Grind: Flat

  •  Blade Style: Reverse Tanto

  •  Blade Finish: Black Stonewash / Satin / Stonewash

  •  Hardness: HRC 60±2

  •  Handle Length: 4.57" | 116.00 mm

  •  Handle Width: 1.06" | 27.00 mm

  •  Handle Thickness: 0.563" | 14.30 mm

  •  Handle Material: Aluminum

  •  Color: Black / Green / Gray / Orange / Blue

  •  Weight: 4.76 oz | 135.00 g

  •  Opener: Front Flipper | Back Flipper | Thumb Hole

  •  Lock Type: V-anchor Lock

  •  Pivot Assembly: Caged Ceramic Ball Bearing

  •  Pocket Clip:  Non-reversible | Stainless Steel

  •  Carry Position: Tip-up

  •  Knife Type: Manual Folding

What other aesthetic options or finishes are available?

There are two options for the handle: Machine textured aluminum that comes in grey, black, orange and green. Or smooth, hard-coated matte finish that comes in blue or black.

What others are saying?:

Product has just been released, so nothing found as of publishing

Link to other reviews:

Gear Junkie

Price point:

MSRP = $169.00

Retail = $159.00 on early Kickstarter

I need it now! Availability:

Kickstarter or Vosteed

Our Rating:

Pros:

  • Great Size

  • New V-anchor lock system

  • Handle Texture

  • Blade jimping

  • Elmax blade steel

Cons:

  • Slightly stiff operation out of box - needs break-in period to operate easier

Score: 9.00 Amazing

Vosteed Corgi

  How the hell do you open it? This was the first comment I received when showing the Vosteed Corgi to friends. Unlike the other knives I own, this knife uses a front/standard flipper to open the blade. It took me a minute to figure out how the mechanism works, but once I did, it opened easily. 

  The Corgi’s blade is 2.99 inches 14C28N modified drop point with a flat grind. I have been using it for the past two months. I have experienced no issues using the knife and the blade has maintained its edge.

  The patented Trek Lock mechanism with ceramic ball bearings makes the blade open and close smoothly. The blade can be closed by using a simple push of the button. When closed, the blade fits entirely in the handle. I was concerned that the button could be accidentally pressed causing the blade to move while I was using it, but that did not happen.

  The Vosteed Corgi is all about symmetry with both sides of the handle being identical. The brass plates were a nice aesthetic touch. According to Vosteed, they also provide structural stability. Keeping with the symmetrical design the blade has a front and symmetrical standard flipper, both with jimping, although I did not use the front flipper. The backspacer has a pin which serves as a lanyard passthrough.

  When Vosteed sent the Corgi for review, it was sent with a sticker, cleaning cloth, Vosteed patch, and a zipper storage pouch. This is how all the Corgi’s are sent from Vosteed.

  The first change I made to the knife was to reverse the pocket clip and set it up for left pocket carry. The primary reason I do this is that I do not like to have anything that could interfere with the drawing of my firearm. The clip was a little hard to get in my 5.11s so I bent it a little out to make it fit easier. The screw which secures the plates backed out causing the plates to loosen. Proper application of a Torx T8 screwdriver resolved the issue. Other than this I did not encounter any issues with the Corgi. From daily use, the micarta handle wore down a little and the brass plates developed a patina.

  I showed the Vosteed Corgi to several friends. Once they learned how to use the flipper, they liked the functionality of it. They went to buy one for themselves, but the knife was listed as sold out on their website. If you happen to be in the market for a smooth gentleman's knife, check out the Corgi at Vosteed’s website.

Firearms Insider Reviews - Key Points

Claim to Fame:

Reasonably priced flipper pocket knife.

Target Market:

Anyone who wants a flipper knife at a reasonable price.

Features, Benefits, and Specifications of this product:

  • Overall Length: 7.17" | 182.12 mm

  • Blade Length: 2.99" | 75.98 mm

  • Blade Width: 0.84" | 21.31 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: 14C28N

  • Grind: Flat

  • Blade Style: Drop Point

  • Finish: Black Stonewash

  • Hardness: HRC 60±2

  • Handle Length: 4.18" | 106.14 mm

  • Handle Width: 0.92" | 23.32 mm

  • Handle Thickness: 0.49" | 12.33 mm

  • Handle Material: Micarta

  • Color: Green

  • Weight: 3.32 oz or 94.00 g

  • Opener: Front Flipper | Back Flipper

  • Lock Type: Trek Lock

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Reversible | Stainless Steel

  • Carry Position: Tip-up

  • Backspacer Material: Micarta

  • Backspacer Color: Green

  • Insert Material: Brass

What other aesthetic options or finishes are available?

Vosteed lists 15 different styles with various handle colors and insert materials.

What others are saying?:

4.6 of 5 stars on Amazon 

My Favorite Knife

This Vosteed Corgi is a little beauty. The action is smooth and quiet, the lines are somehow both streamlined and soft, the blade is classic, not wild or aggressive—this is definitely a gentleman's pocket knife. It looks good, it feels simply good in the hand, the materials are top-notch (14C28N is my #3 steel behind 20CV and Magnacut- I do love my stainless steels), the attention to detail is evident on every section of the knife, both blade and handle. I'm a newbie knife collector, but this is definitely my favorite knife.

Link to other reviews:

Knife Informer 

Price point:

MSRP = $59.00

Retail = $59.00 at Amazon

I need it now! Availability:

Vosteed or Amazon

Our Rating:

Pros:

  • Good value for the price.

  • Trek Lock mechanism is smooth.

  • Good construction.

  • Blade maintained its edge during daily use.

Cons:

  • Screw backed out

  • Limited availability on the Vosteed web site

Score: 8.00 Great

Favorite Link:  2A4E Diversity Shoot

Cobratec Rath

  When it comes to pocket knives, I always try to recommend ones that will not kill the wallet. Cobratec Knives happens to be one of those companies. Yes, they make higher priced items also, but they have plenty in the under $100 range. The Cobratec Rath is one of those. 

  Cobratec’s Rath is a nice everyday folder. It uses a flipper on the top of the handle to open up the knife. And a liner lock to hold the blade in place. Nothing fancy for the Rath as this style of every day carry (EDC) knife has been around for ages. The Rath is a simple knife that works well.

  The specifications on the Rath are what make it shine. It starts with a coated D2 steel blade. If you happen to listen to the podcast, you know that we like D2 steel as a great inexpensive knife blade material. It holds an edge decent enough and is easy to sharpen. I have not needed to sharpen the Rath. Granted, I did not abuse it like the Black Mamba that Cobratec sent for review. The coating on the blade also helps protect it from the elements. A nice touch since D2 is not a stainless steel. The blade's thickness is 0.12 inches and Cobratec hardens it to 55-62 HRC, which is pretty standard for D2.

  Cobratec chose to use G10 for the Rath’s handle. G10 is a composite material that gives the handle good strength. It also is impervious to a bunch of chemicals. The G10 handles will probably outlast the Rath’s blade. Another advantage to G10 is its texture. Even when not texturized, it still has great grip. Exactly what you need and want in a knife handle. The Rath has smooth handles, but they still allowed me to get a good grip on the Rath, partly because of that G10 material.

  The Rath uses a flipper style opening. I like flipper opening knives, and the Rath’s flipper works extremely well. The blade just flips right out. One of my complaints with the Rath is that it only uses a flipper to open it. There is no other way to open it. I’d like to see a little slot or something in the blade so that there is at least another option to open it. However, this does not keep me from liking the smooth operation of the Rath’s flipper. The Rath also uses a liner lock to keep the blade out once it has been opened. The liner lock also performed as expected. To close the knife, just push sideways on the liner to unlock the blade, and then pivot the blade in.

  Now that I have gone over the general stuff, let us get into the numbers. The Rath uses a 3.5 inch long drop point blade. I really like EDC knives in the 3-3.5 inch blade length range. So the Rath checks that box for me. I also am a fan of good drop point blades, and the Rath’s blade shape is very useful. The blade hides in a 4.5 inch long handle that also carries the pocket clip and lanyard hole. I do not use lanyards, but the hole is there if you do. I did like the deep carry pocket clip. It puts the knife pretty far down in your pocket. When the knife is open, it is 8 inches long. Imagine that, a 3.5 inch blade plus a 4.5 inch handle makes 8 inches. For a knife this size, the Rath is fairly lightweight, tipping the scales at 4 ounces. I was really happy with the lightness of the Rath. It is easy to carry in the pocket. 

  I have used the Cobratec Rath for a bit and it has treated me well. The drop point blade cuts nicely for me. It has cut lots of boxes, a few steaks, and some other stuff, all the time doing what a knife should do, cut. One aspect I really liked about the Rath is the jimping on the top of the blade. There is not a lot of it, but it is cut deep enough to get a good non-slip grip with your thumb. The handle’s shape is also very comfortable in my hand and is pretty slim, which I like. I also think the Rath is a good looking knife, especially with the red accent around the pivot.

   Cobratec’s Rath is a good EDC knife. It uses a good coated blade. It has a nice G10 handle. It uses a tried and true flipper opening and liner lock. Plus it looks good. And you get all this for under $60. What more could you ask for in a simple EDC knife? So head over to Cobratec and check out the Rath.

Firearms Insider Reviews - Key Points

Claim to Fame:

Quality Everyday Carry Flipper knife

Target Market:

Every Day Carry or anyone wanting a decent, well priced pocket knife

Features, Benefits, and Specifications of this product:

  • D2 Black Blade

  • G10 Handles

  • 3.5 Inch Drop Point Blade

  • 4.5 Inch Handle

  • 8 Inches Overall

  • Blade Thickness: 0.12”

  • Blade Hardness): 55-62 HRC

  • Liner Lock

  • Weight: 4 Ounces

  • Deep pocket carry clip

  • Flipper

  • Lanyard hole

  • Lifetime Warranty 

What other aesthetic options or finishes are available?

Brown, Grey, OD Green, & Red

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $59.99

Retail = Same but use code “GGR10” FOR 10% OFF

I need it now! Availability:

Cobratec Knives

Our Rating:

Pros:

  • G10 Handles

  • Flipper works nice

  • Price

  • D2 blade

  • Deep pocket clip

Cons:

  • Flipper is only way to open

  • No serrated option

Score: 8.00 Great

Cobratec Large Black Mamba

  Out the Front (OTF) knives have become pretty popular in the last decade. Because of this, I decided to try one out. Cobratec Knives offered me one of their Large Black Mamba’s to review. This is one of their cost effective automatic OTF knives. As it uses D2 for the blade steel. Also, do not let the name fool you, large does not mean huge. The Large Black Mamba is a good size Every Day Carry (EDC) knife.

  As stated, the Cobratec Large Black Mamba is an OTF knife. If you are new to knives, that means the blade actually extends out the front of the knife, through a slot in the end of the handle, automatically. It does this by either a button or switch located somewhere on the handle. The Black Mamba uses a slider switch on the top edge of the handle. It is a dual action switch. Slide it forward to extend the knife’s blade out, and rearward to retract the blade. I do like the switch on the Black Mamba. It has some serrations on it to let your thumb get a good grip on it. The switch is also ramped up and down to position your thumb at the perfect location to use said switch. 

  The specifications of the Black Mamba are what make it a good OTF knife. Even though Cobratec calls it the “Large” Black Mamba, it’s only called large because it is the biggest in the Mamba line. The blade’s length is 3.25 inches long. Making it the same size as a ton of folding EDC knives on the market. Moving to the handle, it has a length of 4.75 inches. This makes sense to me, since the handle houses the mechanism to open the knife, as well as the blade itself. That makes the total length, opened, to be 8.25 inches. The handle's thickness comes in at 0.49 inches and 0.60 with the pocket clip. The height of the handle measures 0.925 inches wide or 1.09 inches if you include the slider switch. I thought the Black Mamba would be larger, but once I received it, I realized it’s basically the same size as most of my EDC knives.

  Cobratec uses D2 steel for the Large Black Mamba’s blade. I like D2 as I believe it is one of the best lesser expensive steels used in knife blades. This also helps keep the cost of this OTF knife down. D2 is not a stainless steel, so to help keep it from the elements, Cobratec gave it a black titanium coating. The coating does two things: It helps protect the blade and it gives it a really nice look. The blade on the Black Mamba is a drop point shape. It is also not serrated. I’m okay with this as I find straight drop point blades very functional. This particular blade is 0.100 inch thick and 0.650 wide. I would have possibly liked a wider blade, but I am not a OTF designer. So there are probably design limitations due to the handle’s width. But the Black Mamba’s blade shape worked well. Being that the Black Mamba is an OTF automatic knife, it does have a blade safety mechanism. If you try to open the knife with something significant blocking the blade from pushing out, the blade will release from the opening mechanism and become loose inside the handle. It will also disengage if you hold the blade tight while trying to retract the blade back into the knife. To get the Black Mamba back into action, just pull the blade all the way out and it will re-engage the opening/closing mechanism. You can also flick the knife and use gravity to do the same thing. This is a common safety feature on OTF knives. 

  I mentioned the handle’s dimensions, but let’s go a little deeper into the handle. The Black Mamba’s handle has little squares machined into it for grip texture. Actually, the lines are machined in it to make the squares. On the top and bottom, Cobratec machined some lines in to give rectangles. All of these squares and rectangles give the Black Mamba a really good grip. Especially since the handle is made from 6061 aluminum, and aluminum can be slick. On the rear of the handle is a built-in glass breaker, should you ever need one. Also on the handle is the pocket clip. It is tip down, right hand only. Tip down is because it is an auto knife. When you grab the knife out of your pocket, your hand is already positioned with the pokey end pointed away from you. So when you push the opener switch, you don’t get hurt. My only real complaint about the Black Mamba is its pocket clip, it is not a deep carry clip. However, the pocket clip works extremely well and is very strong.

  As with almost all of my knife reviews, I like to actually use the knife. I carried the Large Black Mamba for a while. It carries really well. Or at least as good as most of my flipper style knives. The D2 blade came extremely sharp from the factory. I have had to touch it up twice. D2 sharpens pretty easily, so it wasn’t a big deal. One of those times I dulled it up by scraping some stuff off of a metal surface. Probably something that no knife maker recommends. The opening mechanism has also never let me down. Plus it is super easy and fast to use. I’m not a big OTF guy, but the Black Mamba performed great for everything I threw its way. 

  If you like OTF knives, or maybe want to get into OTF knives, the Large Black Mamba might be just what you are looking for. It is priced right at $170. Has a good blade steel. It functions fantastic and has a good blade shape. What more could you want from an OTF knife? Go check out the Cobratec Large Black Mamba and see for yourself. Or at least take a look into all the other OTF knives Cobratec makes. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Everyday Carry Out the Front knife

Target Market:

Anyone wanting a quality OTF knife

Features, Benefits, and Specifications of this product:

  • Weight: 3.5 oz

  • Blade Length: 3.25"

  • Handle Length: 4.75"

  • Total Length: 8.25"

  • Titanium coated Drop point D2 blade

  • 6061-T6 aluminum handle - textured

  • Side opening slider switch

  • Glass breaker

  • Lifetime Warranty 

What other aesthetic options or finishes are available?

None

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $169.99

Retail = Same but use code “GGR10” FOR 10% OFF

I need it now! Availability:

Cobratec Knives

Our Rating: 

Pros:

  • Lightweight

  • Price

  • Good grip texture

  • Good blade design

  • Glass breaker

  • Fast

Cons:

  • Pocket clip isn’t deep carry

  • Blade is a little narrow

Score: 8.00 Great

Favorite Link:  Gideon Optics Judge review

Hi-Point 3095

  Hi-Point Firearms has made it a point to make inexpensive firearms. They also are not the junk people on the internet say they are. In fact, they make one of the only carbines in 30 Super Carry, the model 3095. The Hi-Point 3095 carbine they sent me for review was quite reliable and fun to shoot. 

  The 3095 carbine has a lot of decent mechanical features. It uses a blowback style action to keep the gun's operation simple. Because of this, there are not very many parts that can go bad. Basically, you have a barrel, the slide, recoil spring, and a trigger assembly. The barrel is fixed into the action, which can give some really good accuracy. In fact, I was pleasantly surprised by how accurate the 3095 was. 

  Sighting features of the Hi-Point carbine are as expected. There is a hooded post front sight with a ghost ring style rear sight. This sight worked really well, even if it is a little slower to pick up than say an AR15’s iron sight. The rear sight is easily adjusted for windage and elevation, with little hash marks to know where it’s at. One can use a small screwdriver to adjust it. Now, I did have the front sight post come loose after about 250 rounds. It was easily repaired by tightening the two screws back up. I used loctite, maybe Hi-Point forgot to do that. The rear sight is removable by unscrewing a couple of screws. Once removed, it gives access to the top picatinny rail. The rail is plastic, but that doesn’t seem to affect it. Hi-Point also put a short piece of pic-rail under the front handguard and under the barrel. That way you can attach accessories. Or you can remove it if you don’t want it on. 

  Operation of the Hi-Point 3095 is straightforward. To cycle, or charge, the carbine, just pull back on the charging handle. It's on the left side of the firearm and does reciprocate when firing. One also has to install the handle when the carbine comes out of the box new. Just screw it in and tighten with the supplied multi tool. I would recommend blue loctite because I did have the handle come loose without it. On the left side of the pistol grip is the magazine release. The magazine goes into the pistol grip like a handgun typically would. Right above the pistol grip, on the left side only, is the safety. Move it up for safe and down for fire. No, the controls on the 3095 are not ambidextrous. They also are not placed where it is easy for me to get to them. I have to take my hand a bit off of the pistol grip to move the safety into the “fire” position. But not to put the safety on. I also have to twist my hand slightly to depress the magazine release. If you have larger hands, this may not even be a problem for you. Moving to the trigger, it is not great. Yes, it has a smooth pull, but it is long and takes a 7lb pull to get it to fire. The carbine will lock the bolt back on the last round fired. But there is no way to lock the bolt rearward without an empty magazine in the firearm. 

  As mentioned, the 3095 carbine comes with a multi-use wrench. The wrench has everything you need to adjust and take apart the carbine. Also included with the carbine are a sling. The sling is just a two point style used for carrying. It is not a quick style sling. Probably the most important tool in these add-ins is the magazine loader. It helps quite a bit getting those little 30 Super Carry rounds into the single stack magazines. Unfortunately these magazines only hold 10 rounds each. Good for magazine restricted states, not so good for the rest of us. 

  Ergonomics of the Hi-Point 3095 are actually pretty decent. The stock and handguard are polymer, as is the pistol grip, which is also part of the stock. The forend gives good grip with its molded grooves. The pistol grip feels good, even if I can’t get to the safety easily. Then there's the stock. It is really nice. Part of this is due to a decent cheek rest. But the other part is because of the spring assisted butt plate. This helps soak up recoil. Okay, what little recoil the carbine has. My only complaint about the stock is that the length of pull is fairly long. This makes it harder to use for small statured people.

  The 3095 carbine is fairly short. It is 31” overall. To put that in perspective, my 11.5” AR15 is the same length with the stock fully extended. Yes, my AR is a registered SBR. So the Hi-Point carbine gives you short barrelled rifle (SBR) length without the hassle of registering a SBR. Plus with the 3095, you get a full 16.5” barrel length. Another plus, the Hi-Points barrel is threaded ½-28 so you can add something like a 9mm suppressor. This 3095 carbine also only weighs in at 6 ¼ pounds. The Hi-Point 3095 gives you a nice size package in a pistol caliber carbine.

  Hi-Point makes their carbines in a bunch of calibers. I chose this particular one because it is in the newer 30 Super Carry cartridge. The 30 Super Carry is a 30 caliber “pistol” cartridge. It was designed to bridge the gap between 380 and 9mm. Yes, the bullet is smaller but it is in the same weight range as lighter 9mm loads. Most of my testing was done with CCI Blazer 115 grain 30 Super Carry rounds. In a carbine like the 3095, the 30 Super Carry benefits from some added velocity, making it a good choice for home defense. In a pistol, it also increases the amount of ammunition you can put into a magazine. Assuming the pistol is the same size and model. It is too bad that the Hi-Point carbine doesn’t benefit from the higher possible magazine capacity. Either way, the 30 Super Carry round really impressed me out of the 3095 carbine.

  One might ask what is a good use for a Hi-Point carbine? There are many. You could use it as a home defense weapon. This is because it is light and maneuverable. Plus they are far more reliable than the internet makes them out to be. Another use might be a “truck” gun. Something that can reach out farther than a pistol but has little recoil. And last, just something to have fun with at the range or out plinking in the woods. The Hi-Point 3095 can fit a variety of shooting needs.

   How do I feel about the Hi-Point 3095 carbine? First off, I love how well it shoots. There is very little recoil in the 30 super carry round. It is fairly accurate. I was getting 1”, 10 shot groups at 25 yards, off hand, with the factory sights. The carbine is short, which makes it handy to use. I personally didn't care for the ergonomics of the grip and safety. However, I did like that the barrel is threaded. In fact, I even put my sub-gun suppressor on it to try it out and it worked fine. The little 30 Super Carry round is quite potent and is moving pretty fast. Which is a good combo for this carbine. I liked the 3095 carbine way more than expected.

  Sometimes you come across something that surprises you. The Hi-Point 3095, in 30 Super Carry, may just be that for you, it was for me. It made me really like the round it fires. It functioned fine throughout the review. Maybe I had to tighten some set screws, but that's not something that stops the gun from functioning, just being able to hit something. Is it the best? No, but it was reliable for me and a whole lot of fun to shoot. If you want a firearm that will not break the bank, but still functions, and in a caliber that does not have much recoil, the Hi-Point in 30 super carry may be the trick. You can check it out over at Hi-Point.

Firearms Insider Reviews - Key Points

Claim to Fame:

Inexpensive 30 Super Carry Carbine

Target Market:

Home Defense, Range Use, Just a fun carbine

Features, Benefits, and Specifications of this product:

  • Weight: 6.25 lbs.

  • Capacity: 10-shot magazine standard

  • Overall length: 31"

  • Sights: Fully-adjustable

  • Stock: All-weather black molded polymer

  • Threaded 1/2 x 28 barrel w thread protector 

  • Thumb magazine release

  • 100% American-made parts and assembly

  • Internal recoil buffer in stock

  • Last round lock open

  • Picatinny rails

  • Manual thumb safety

What other aesthetic options or finishes are available?

.380, 9mm, 40 S&W, 10mm, & 45 ACP

What others are saying?:

Nothing to note as of publishing 

Link to other reviews:

GUNS.com Review   

Price point:

MSRP = $369.00

Retail =  $309.99   at Guns.com

I need it now! Availability:

Guns.com or your local Hi-Point dealer

Our Rating:

Pros:

  • Price

  • Only 30 super carry carbine on the market

  • Accurate 

  • Compact size

  • Recoil reducing stock

  • Comes with sling

  • Made in the USA

Cons:

  • Quality control - front sight base came loose

  • Single stack only, so low capacity

  • Hard to reach safety

  • Trigger pull

Score: 6.50 Okay

Favorite Link:  Tony’s Hi-Point 995 review

CRKT Fossil

Written by: Casey Kienzle

  When it comes to everyday carry pocket knives, CRKT has a wide range of different styles. The CRKT Fossil is one of them. It falls under the category of a gentleman’s knife, meaning that it’s tough and durable. But it has a decorative look. This is truly a fantastic knife that is different from your regular pocket knife, and it won’t break the bank. So let’s check out everything that makes this knife a truly great addition to your collection!

The handle: 

  When you see a pocket knife, the first thing that stands out is the handle. And the handle on this knife is one of its biggest strengths! This knife's name is the “Fossil” and they managed to give the handle a slick design while also resembling something that looks like a fossil. The handle has a stainless steel frame that has a really great looking hammer finish on it and features G-10 scales on top of that. The handle has been milled out revealing different shades of brown. Those two together give it that awesome “fossil” look. The unique finish on the G-10 gives it a fantastic grip in your hand. This is by far an incredibly creative design for this knife that really makes it stand out! This knife is a right hand only knife, it does not have a spot to flip the clip around for left handed people. But I am right handed, so this hasn’t been a problem for me.

  The Fossil has a frame lock, and it has to be one of the better frame locks that I’ve had in a knife. The lock on this knife is a little stiffer than other knives, giving it a stronger lockup on the blade. But this doesn’t make it hard to unlock, it still can be easily unlocked with your thumb when you are ready to close the knife. One thing that really stood out to me on the knife when I first got it was the guard on the handle. When you open the blade, the flipper tab swings through and acts as a guard. The shape of the handle already has a really nice area for your finger to sit. But then you get the guard, and it makes it really hard, actually just about impossible for your fingers to slip onto the blade.

The blade:

  The blade on the CRKT Fossil is a “drop point” style. Measuring in at 3.96, it gives you plenty of blade length for cutting. When I first opened the knife I also noticed how crazy sharp it was right out of the box. Since then it’s held a sharp edge very well, and I cut lots of stuff with this knife. Things like cardboard boxes, zip ties and plastic straps for larger boxes like furniture. I have even used it before to scrape off plastic from a few different things. After all of that…it’s still sharp! The blade material is 8Cr13MoV which has stayed sharp for quite some time now. 8Cr13MoV steel’s strength is much higher than other high carbon stainless steels, such as 440C. The back of the blade has some of the best jimping I’ve had on a knife. It keeps your thumb or finger in place really well allowing you to maintain really good control over the knife. 

Opening:

  The CRKT Fossil features a bearing-run pivot that gives this knife a really smooth opening. This knife also opens very quickly when you flip the tab on the back, which really stands out to me. The Fossil gives you two different styles of opening. I have had to use both styles depending on how I open the knife. Both styles have been very smooth and easy. Opening one is the flipper on the back. And opening two is the thumb hole on the back of the blade. Sometimes thumb holes on the back of blades can be a little tricky, but this one has never given me any trouble. 

Summary

  I really love the CRKT Fossil. It is a very nice looking pocket knife that has a cool and unique design, while also being quite durable. The handle on the knife is very comfortable to hold onto while you are using it, but also has a good non-slip grip. The blade has been phenomenal for me. It’s kept an edge really well making it always reliable. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Unique but tough knife

Target Market:

The CRKT Fossil is for anyone who wants a not highly expensive EDC knife, but wants something unique and different looking. 

Features, Benefits, and Specifications of this product:

  • Overall Length: 8.88"

  • Blade Length: 3.96"

  • Blade Thickness: 0.15"

  • Blade Material: 8Cr13MoV

  • Hardness: 58-60 RC

  • Blade Style: Drop Point

  • Finish: Satin

  • Handle Length: 4.95"

  • Handle Thickness: 0.62"

  • Handle Material: G-10 

  • Frame/Liner: Steel

  • Weight: 6.10 oz.

  • Right Hand Pocket Clip: Tip-Up

  • Opener: Flipper

  • Lock Type: Frame Lock

What other aesthetic options or finishes are available?

There is also the 5460 model that has a 3.41 inch blade. That one is around $10 cheaper.

What others are saying?:

It hurts how underrated this knife is. It is a great design because it is comfortable, has a buttery action, useful blade, and beautiful aesthetics. It really feels like a perfect merging of old world with new world materials. This was my first 'gentleman's carry' in my collection and I highly recommend this blade.

Link to other reviews:

Pro Tool Reviews

Price point:

MSRP - $99.99

Retail - $65-$70

I need it now! Availability:

LA Police Gear , Blade HQ, or Knife Center

Our Rating:

Pros:

  • Quick opening

  • Sharp blade

  • Fantastic design

  • Two opening styles

Cons: 

  • The G-10 handle has great grip, but almost too much

  • Sometimes a little tough to pull it out of the pocket due to aggressive grip texture

Score: 8.00 GREAT

Rogue Apparatus Holster

  When it comes to everyday holsters, most people tend to go straight to kydex. Well, Rogue Apparatus is here to change that with their hand crafted leather holsters. These leather holsters rival kydex in form and function. Rogue Apparatus sent an Appendix Inside the Waistband (AIWB) holster for me to try out.

  The first thing you notice about this holster is how nice the leather work is. Yes, it is handcrafted, which adds to the appeal. They are also molded to your particular firearm. This particular one is for a G19 and is green and black dyed leather. My understanding is that Rogue Apparatus can dye these in just about any color you want. The holster is sewn nicely too. It really is a beautiful holster.

  Moving on to the holster design. As mentioned, this Rogue Apparatus holster is mainly an AIWB. I ended up taking the wing off and using it as just an IWB and it works great in that role. Because the Rogue Apparatus holster is an AIWB, it does not have any adjustments for cant or ride height. The holster uses thick quality leather as the main material. It is then partially wrapped in a thinner leather. This thinner leather also holds the screws for the DCC monoblock so you can clip it onto your belt. DCC clips are my favorite and are the best belt clips I have used. One huge advantage to the Rogue Apparatus holster is the leather treatment. They seal it with an acrylic resolene. By sealing the leather holster in this manner, you get qualities that are similar to kydex. One of these is the ability of this leather holster to retain its shape better over time. The other is how the pistol “clicks” into the holster. It’s not as pronounced as kydex, but the Rogue Apparatus holster has a similar feel.

  I have carried the Lone Wolf Dusk 19 in this holster for some time. I really like the feel of leather. It seems more comfortable next to the skin. Yes, being that the Rogue Apparatus holster has been sealed, it is still stiffer than the leather holsters of the past. The Dusk 19 slides in and out of the holster nicely with some resistance. Since the holster is hand molded, it has indents around the trigger guard, very similar to any kydex holster. This helps aid in retention. The rest of the retention is also decent. This holster is also cut to accept a pistol with a red dot sight on it. One complaint is that the sight channel could be taller to accept “suppressor height” tall sights. Especially since it’s cut away for those red dots. The Rogue Apparatus holster has a nice sweat guard that rides up the side next to your body. This particular sweat guard is not too large or too small, it’s a very useful size. The holster is well designed and lets me get a good grip on the pistol and allows for a clean draw stroke.  

  If you are looking for something different in a holster, maybe more of a piece of functional art, look into a Rogue Apparatus holster. These things function as expected, they are a holster after all. Beautiful is probably an understatement on how they look. You will be  getting a custom leather holster that should treat you well for years to come. I’m pretty happy with what Rogue Apparatus has done with their AIWB leather holster. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Custom Leather holster that functions like kydex

Target Market:

Concealed Carry

Features, Benefits, and Specifications of this product:

  • Made of veg-tan leather that has been custom dyed, formed and sealed with acrylic resolene to retain firm structure and snappy retention

  • Discreet carry monoblock

  • Modwing - removable

  • Stitched with heavy 277 Leather Machine Co threads.

What other aesthetic options or finishes are available?

Pretty much any color combination and clip styles

What others are saying?:

Angelo O. - 5 out 5 stars at ETSY.com     

I ordered this for my Kimber ultra carry ll. It’s a perfect fit, and very high-quality, it has good retention. It’s comfortable and it stays in place with the belt that I use.

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $165.00

Retail = Same

I need it now! Availability:

Rogue Apparatus or their ETSY store

Our Rating:

Pros:

  • Looks

  • Good retention

  • Multiple color options

  • DCC clip

  • Leather feels better than kydex

Cons:

  • Sight channel a little short

  • Price

  • No cant adjustable option when compared to kydex

Score: 8.00 Great

Favorite Link:  Vosteed Thunderbird Review

Lone Wolf Dawn 365 Slide

  I was grateful enough to receive a Lone Wolf Arms Dawn slide for my plain Jane Sig P365. The slide came unassembled and the first thing I noticed when I opened the package was the great machining and beveled edges of the slide. The slide was gun metal gray and had an optic cut for the Holosun 507K footprint. The optic cut had a cover plate installed on it to prevent damage to the optic area. 

The Dawn slide is made out of 17-4 high strength stainless steel. It has a lot more beveling and serrations than the regular stock P365 slide. If you start at the front of the slide and work your way back you can see all of the improvements over the OEM slide. All of the leading edges from the crown of the slide back are either recessed or beveled all the way around for ease of holstering and less friction for a snag free draw or reholstering. The serrations are more aggressive than the OEM slide and have two extra lines for a total of seven compared to the stock slide with five. The serrations blend in from the top of the slide down and have great line transitions. It doesn't have the blocky feeling or look of the standard slide. On top of the slide it is also beveled around the ejection port with two triangle lightening cuts that are cut clean through to the barrel. I am not sure if this is to reduce weight or if this is to act like a type of compensator cut for the barrel. Moving on back you get to the optic cut which is nicely machined with very few if any machining tool marks in the optic cut. The slide is cut for your standard P365 dovetail drift sight, front and rear. On the back end of the slide are the rear serrations that are aggressive like the front ones and just as well as eye pleasing. Just like the front the rear has a nice transition from top to bottom on the serrations. 

  The Lone Wolf Dawn P365 slide was straightforward to assemble, and I used all of my stock parts from my OEM slide to build it out, including my sights. I pulled off the optics plate and added a Swamp Fox Sentinel that I pulled off another pistol. This was an amazingly easy process and everything bolted and fitted together perfectly. The point of aim when coming out of the holster and aiming at the target was very natural. It appeared more natural pointing than other firearms that I have.   

  At the range, the Dawn P365 slide ran just like I thought it would. The slide was easy to grab and pinch to manipulate. There were no malfunctions when firing. The holster I had was a perfect match for the slide and optic. I enjoyed the serrations on the front and rear even with gloved hands, the gloves seemed to grip the serrations just right and the slide never slipped. When I manipulated it with bare hands the serrations were just right and not too coarse to make it feel uncomfortable in the hand. 

  The QPQ coating (quench, polish, quench) on the slide is great and functional. The gray color of mine was dull enough for the sun not to shine off of it but yet is tough enough to resist me carrying it in wet weather conditions with no sign of corrosion. 

  So in concluding this article if you're looking to upgrade your stock P365 I do not see how you can go wrong with a Lone Wolf Dusk P365 slide. If you factor in the cost and time of machining a slide, I feel you're better off buying a slide to put an optic on. Lone Wolf has them for the stock P365 and the P365xl model. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Long time barrel and slide manufacturer

DIY slide for the Sig 365

Drop in fit

Bearing like slide action

Target Market:

People looking for drop in parts for the Sig P365

Compatible with all OEM barrels

Optic Cut

FNBs (Features & Benefits of this product): 

  • Ready to use, pre-fit for a drop in installation

  • Slides fit SIG® factory frames

  • Compatible with Lone Wolf® DAWN 365 Barrels and OEM P365 Barrels

  • Coated for corrosion and wear resistance

  • Heat treated, high strength 17-4 stainless steel construction

  • Exacting tolerances produce greater shot-to-shot accuracy

  • Optic cut for Holosun® 507K footprint

  • Proudly made in the USA

What other aesthetic options or finishes are available

Made for the standard P365 and the P365XL

Numerous color options to choose from

Link to other reviews:

NRA Family 

Gun Mag Warehouse

Price point:

MSRP = $289.95

Retail = $289.95

I need it now! Availability:

Lone Wolf Arms

Our Rating:

Pros:

  • A great upgrade for a stock P365

  • Fills the gap between the Xl and standard P365

  • Optic ready

  • Great coating

  • Bearing like coating

  • Improved accuracy

Cons: 

  • I could not find a con for this product

Score: 8.00 Good 

CRKT LINCHPIN

Written by: Casey K.

  Over the past few years I have been collecting pocket knives from various different manufacturers. I like to use these for Every Day Carry (EDC). There is one knife that has really topped my list, the CRKT Linchpin. Here are my thoughts on this fantastic pocket knife.

The handle:

  When I first took this knife out of the box, I immediately noticed how durable it felt. The handle is made of glass reinforced nylon with two different styles of texture to offer more grip. One thing that I really appreciate is that the screws on this knife are countersunk which keeps the screws from snagging in your pocket when you go to remove the knife. 

The lock:

  This knife features a large button lock that I personally love! Anytime I lend this knife to someone, they always tell me how much they like the button lock. Mainly because it’s larger and easily unlocks. The button lock does not easily unlock while the knife is in use though. The button also features a really nice texturing design that makes it hard for your thumb to slip off of. 

The blade:

  This has to be one of the best blades I’ve ever had on a pocket knife. The blade material is 1.4116 stainless steel, which is slightly stronger than 420HC. The blade is a spear point that turns serrated halfway down the blade. The serrated section of the blade has great, bat-wing style, serrations that cut through thick stuff like it was nothing. The serrations are called “Veff” serrations. I recently moved and this was the knife that I used during the moving process, and wow! After cutting tons of packing tape and boxes, the blade still has a sharp edge! On the back side of the blade it offers a nice thumb grip (jimping) that keeps your thumb in place very nicely.

Opening:

  One thing I really appreciate about this knife is that it offers 2 different styles for opening. It has the flipper on the back which is what I prefer. But sometimes you are cutting something and your hand may be in an awkward position, so in those situations it’s nice that it features thumb studs as well. 

  The CRKT Linchpin is a fine knife to use as an EDC. It’s incredibly durable and holds an edge very well. This knife is a little larger giving you more of a grip to hold onto. It has a serrated spear point blade which gives you different options for your cutting needs.

Firearms Insider Reviews - Key Points

Claim to fame: 

Large and sturdy EDC

Target market:

Anyone who would like a great EDC pocket knife that’s a little on the larger side.

Features, Benefits, and Specifications of this product:

  • Overall Length:
8.875"


  • Blade Length:
3.75"


  • Cutting Edge:
3.50"


  • Blade Width:
1.13"


  • Blade Thickness:
0.15"


  • Blade Material:
1.4116


  • Blade Style:
Spear Point


  • Blade Grind:
Flat


  • Edge Type:
Serrated


  • Handle Length:
5.25"


  • Handle Width:
1.25"


  • Handle Thickness:
0.68"


  • Handle Material:
Glass Reinforced Nylon

  • Frame/Liner:
Steel


  • Weight:
6.20 oz.


  • User:
Right Hand


  • Pocket Clip:
Tip-Up


  • Opener:
Flipper


  • Lock Type:
Button Lock


What other aesthetic options or finishes are available?

None

What others are saying?:

Super Sharp Serrations

Sharpest serrations by far on any knife in my collection. Cuts through vines with almost no effort. Much easier than any other knife used for the task. My chickens love grapes so every day lately, I've cut off a few bunches for them. The other day, I was carrying the CRKT 5406 and cut through a vine with the tip of the blade. Whittled through the vine a few times and removed the grapes as usual. I decided to use the serrated part of the blade, touched it to the vine and the bunch of grapes just fell off. Thought it was an anomaly so did it again another few times with the same results. Wow. As to the rest of the knife... Good fit and finish. The locking mechanism is a bit sticky. It improved a bit after oiling and many deployments, but still sticky. Overall a great knife for cutting stuff in the garden.

Link to other reviews:

Kevin Cleary on YouTube

Price point:

MSRP- $145.00

Retail- $39.95 at Knife Center 

I NEED IT NOW! AVAILABILITY:

CRKT Linchpin - Columbia River (CRKT) - Knife Center

Amazon

Our Rating:

Pros:

This is a really solid feeling pocket knife. I really believe that it can take whatever you throw at it. It feels incredibly durable when it’s closed and when it’s open and being used. It holds a sharp edge for a good long while. I personally also love the button lock style on this knife.

Cons: 

The price point of $145.00 is pretty high for this knife, I think the sale price of almost $40.00 is a great deal! 

Score: 8.50 GREAT

Powertac WOFT

  When it comes to handheld flashlights, there’s a ton of them around. The ultimate question is how do you know which one is right for you? I would go check out reviews and specifications. Which is probably why you are here. Powertac has been doing some pretty interesting things with handheld lights. I’ve reviewed a few of their lights in the past and they performed well. They sent out one of their new lights, the Powertac WOFT tactical EDC light. This light is a collaboration with WOFT (Where Our Families Train) training.

  The Powertac WOFT light is very compact. It has a length of 4.28 inches. A head diameter of 1 inch and a body diameter of 0.85 inches. This makes it fit in the pocket nicely. I usually just throw the WOFT light in my pocket. But for those wondering, it does have a pocket clip. The pocket clip is dual purpose, so it can be clipped onto stuff in either direction. So basically, button up, or button down, whatever suits your carry style. I did find it useful, if you needed to use the Powertac WOFT light as a headlamp. Just clip it to your hat brim and light up wherever your head is facing. The clip can be located around the flashlight body in 4 different locations. The Powertac WOFT is compact enough to make it easy to carry everyday.

  Function of the Powertac WOFT is pretty self explanatory. For instance, the button on the rear tailcap turns the light on and off. One press on, one press off. To momentarily turn the light on, just lightly push the button down. If you double tap the rear switch, you turn on the strobe mode. This works both in momentary and click options, depending on if you want the strobe to stay on or just use it for a wee bit. The tailcap button also has two ears sticking up to protect the button.These ears allow you to stand the light upright on a flat surface. I’m a big fan of a light that can stand up and be used to illuminate a whole room, similar to a lantern.

Front Target stands are 50 yds, Rear are 100 yds. Anything within 50 yds is easily identified

  The Powertac WOFT also has 5 brightness settings. These are: Firefly, Low, Medium, High, and Turbo. The Light ALWAYS turns on in the Turbo made. This is great for a tactical flashlight application, because if you need it, you want it on the highest setting. After the initial turn on, you can cycle through the lights settings by using the side button, which is located on the side of the flashlight's head. Since the WOFT light turns on in the Turbo mode, the first press of the side button takes you to the Firefly mode. Then each consecutive press takes you to the next level. I’m a big fan of tactical EDC lights that always turn on at the highest setting. Powertac hit this option spot on. I also really like the Firefly setting as a task light in dark settings.

  Now what everyone is waiting for, how bright is this Powertac light? It’s plenty bright at 1200 lumens for the Turbo mode. The Turbo mode also spews out a candela rating of 14,400. This gives a good combination of spot and flood. It’s plenty enough to disorient an aggressor. Powertac specs it out at a 240 meter beam distance, we all know that about half of that is useful distance. But that’s plenty for a small handheld light. The light runs off of a rechargeable 14500 cell. Extra are easily found on Amazon and other places. Powertac includes a magnetic usb charging cord that works great for onboard charging of the battery and light. For all you geeks out there (me included), here’s a list of those brightness modes and run times:

Lumens and Run Times:

Firefly - 0.41 lm for 3.4 days

Low - 19 lm for 9.69 hrs

Medium - 140 lm for 3.68 hrs

High - 600 lm for 47 mins

Turbo - 1,200 lm for 43 mins

Strobe - 1,200 lm for 1.18 hrs

  In the box are a few other items. The Powertac WOFT comes with 3 different bezels: a smooth one, a medium aggressive, and a pretty aggressive one. They just screw on, so they are easily swapped. Of course I used the most aggressive one. If I have to use it as an impact weapon, I want it to hurt. But the choice is yours. Also included is a wrist lanyard. I left it in the box, but it’s included if you have a need for it. The included extra bezels are a nice addition.

  The Powertac WOFT has become my EDC light. I carry it daily. Mainly because it has great light output for its size. I like that it’s not too large in diameter. Most other lights in this category seem to have a larger diameter, with a similar length and output. If I had one complaint, it would be run times, but I can’t expect that in such a small light. At first I had a little sticker shock on the price, but after using it for months, I get why it costs what it costs. 

  Powertac and WOFT did a great job putting this EDC light together. From its small size to its impressive output, it does what a pocket edc light should do. Always coming on in the turbo mode is what a tactical light should do, at least if it has more than one output. If you are looking for an edc pocket light, I’d recommend checking out the WOFT light at Powertac, as well as the other lights Powertac offers

Firearms Insider Reviews - Key Points

50, 100, 200 yd target stands

Claim to Fame:

Bright, small, rechargeable handheld light

Target Market:

Anyone needing a small, bright, handheld light

Features, Benefits, and Specifications of this product:

  • 1200 lumens max output

  • 14400 Candela max

  • 6 different settings that include 5 levels of brightness plus a strobe

  • 14500 Rechargeable Battery

  • Interchangeable smoothed, scalloped, & aggressive bezel

  • Magnetic USB Charging

  • Length: 4.28” (108.6mm)

  • Bezel Diameter: 1” (25.4mm)

  • Body Diameter: 0.85” (21.5mm)

  • Weight: 2.61oz (74g) without battery

  • Deep-carry bidirectional pocket clip

  • Reverse polarity protection protects from improper battery installation

  • O-ring sealed

  • Machined from aircraft grade aluminum with type III anodized finish

  • Tempered glass to resist breaking and scratching upon impact

  • Double coated glass lens to give maximum OTF (Out The Front) brightness and beam distance

  • IPX8 waterproof Submersible up to 2 meters under water

  • Lifetime Warranty

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out 5 stars at Powertac.com

This flashlight is a BEAST

There are some fantastic features packed into this bad boy. I love how quick and easy it is to switch to strobe for home security or signaling, then back to Turbo. The WOFT lights up my whole street in Turbo mode. Nice build, well done Powertac!

Link to other reviews:

Tactical Tavern on YouTube   

Price point:

MSRP = $129.95

Retail = $110.45 with discount code “GGR”

I need it now! Availability:

Powertac

Our Rating:

Pros:

  • Small size

  • Bright beam

  • Good beam pattern

  • Always turns on at Turbo setting

  • Multi-Directional pocket clip

Cons:

  • Run Time

  • Price

Score:  8.00 Great

Favorite Link:  Powertac M5 G2 Review   

Primary Arms AutoLIve Battery cap

  We have all had that feeling of forgetting to turn off an optic. Then, the next time you go to the range, or worse, the field, and go to turn on the optic, you see no illumination. Advances in optics allow auto on/off capabilities. But maybe you don’t want to have to buy a whole new optic. Primary Arms has you covered. They have introduced their Autolive battery cap! The Autolive battery cap turns your optic into one that has auto on/off capabilities.

  Primary Arms has made optics that turn the reticle on and off automatically for some time. The Autolive battery cap does the same thing for optics that don’t have this feature. Autolive works by sensing when the optic moves, or hasn’t moved. When Autolive senses movement, it will automatically turn the reticle on. It is so quick, that you will never notice that the reticle was off. After the 2-3 minute mark of no movement, the Autolive function will turn off the power to the reticle. Then, when you move it again, the cycle starts over.

  So what is the Primary Arms Autolive battery cap? It is a battery cap that has built in electronics for the Autolive function explained above. Granted, it is larger than the original battery cap that it replaces, but not by much. I’d say it’s only about ½” taller. Or, it only adds ½” in height to where the battery is installed. A pretty small price to pay for Autolive functionality.

  Installation of the Autolive battery cap is simple. Just unscrew your old battery cap. Remove the 2032 battery. Screw in the Autolive battery cap until snug/tight. Now, the Autolive battery cap has a lock ring on it. Screw the locking ring down and tighten with the supplied tightening tool. Install your 2032 battery into the Autolive cap. Then screw on your original battery cap to the top of the Autolive one. Now adjust your reticle brightness to your desired level. You are now ready to save your battery life and have the illumination function automatically turn on when you move the firearm. 

  I ended up trying the Autolive battery cap on two different optics. The first one was a Lucid Optics L7. Primary Arms doesn’t list the L7 as an optic that the Autolive battery cap works on, but it did. As long as the thread pitch is correct, the Autolive cap should work. As expected, the L7 now had instant on and off reticle illumination. I then transferred the Autolive cap over to a Primary Arms SLx with their NOVA reticle, since this is on a gun I use more. The Autolive cap performed great on it also. The main drawback I see with the Autlive battery cap is that it only works on selected models of optics. These optics are, as listed on the Primary Arms website:

Primary Arms SLx 1-8×24 FFP & SFP

Primary Arms SLx 1-10×28 SFP

Primary Arms SLx 1-6×24 SFP Gen III and IV

Primary Arms SLx 1-6×24 FFP

Sig Optics Tango6® MSR 1-6x24mm

Vortex Strike Eagle® 1-6 SFP

Vortex Strike Eagle® 1-8 SFP

  So if you want to upgrade that optic to auto on/off, the Primary Arms Autolive battery cap just might be the thing. It will save you battery life and hopefully you won’t have that dead battery next time you head into the field. It’s a great option for that beside the bed gun, especially since you know the reticle will turn on when you grab it. If this is something you are interested in, head over to Primary Arms and check out the Autolive battery cap. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Turns illuminated optics on with motion

Target Market:

People who forget to turn off their optics or want better battery life

Features, Benefits, and Specifications of this product:

  • Integrated AutoLive motion sensing technology

  • Instantly turns on optic illumination when you pick up your firearm

  • Low profile design

  • Extends battery life

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out 5 stars from Connor M. at Primaryarms.com

PERFECTION

Does exactly as advertised, and the install was a breeze. Set my rifle with the Gen 4 Nova 1-6 on a table, illumination was on, left it for 5 minutes and came back it was off and then with a poke it came back to life again. Just find your favorite brightness setting (i've found 8 works best for both darker rooms and full day light bright) set it and forget. This and the Nova are a hell of a combo to beat for $400.

Link to other reviews:

Tiberious Gib YouTube    

Price point:

MSRP = $49.99

Retail = Same

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Massively increases battery life on optics without this feature

  • Small - adds very little size

  • Works on a variety of LPVO’s

Cons:

  • Price

Score: 7.50 Good

GForce Arms Rapture

  I recently ran across the GForce Arms GF9 Rapture handgun. I was intrigued by this new micro-compact handgun as it has a bunch of Glock parts compatibility. So much so that I contacted GForce Arms about getting one for review. As you can figure out, GForce sent out a Rapture to do a full review on. The Rapture surprised me with all its features, especially that it can be found for around $350.

G43 on top of Rapture for size comparison. Rapture grip frame is about 1/2” longer with no magazines inserted. Picture is not a perfect representation

  The Rapture is a small 9mm handgun aimed at the carry market. For comparison, it is roughly the same size as a Sig P365X. So it technically fits into the “Micro Compact” size description. The Rapture’s grip frame is larger front to rear, so it feels good in the hand, at least mine. The Rapture is still very narrow, coming in at 1.12” total. It runs a 3.25” barrel for a total length of 6.6”. The main difference in the GForce Rapture is that it has a bunch of parts compatibility with the G26. Including working in G26 holsters.

  GForce Arms put a lot of work into designing the Rapture. For the polymer frame, they gave it a great usable sandpaper type texture. This texture is on the front, sides, and rear backstrap. It is also toward the front of the frame where you would rest your trigger finger or thumb. Speaking of the backstrap, the Rapture comes with 4 different ones. A 0° that comes installed on the Rapture, then a 2°, 4°, and a 6°. These options help the pistol to fit any hand size, from small to large. On the rear of the Rapture is a beavertail to help lessen the chance of slide bite. GForce Arms kept it on the smaller side, I believe, to keep the pistol compact. It still functions as expected. The grip also has some slight indents where your trigger finger and thumb rest. This aids in getting a proper trigger pull for those with smaller fingers. It also helps with hitting the large magazine release. Being fairly large, the mag release size is nice and very useful. Helping to get rid of that awful Glock knuckle, is a slightly undercut trigger guard. One of the few flaws I found with the Rapture is the lack of a rail at the front of the pistol. But, it also wouldn’t fit in standard G26 holsters if it had one. Lastly, there is a thin slide release. Amazingly, the slide release was way easier to use then I expected it to be.

  When GForce Arms says the Rapture is “heavy in glock compatibility”, it is. All of the internal parts are gen 3 Glock compatible, and some of the external ones. So if you want to change out the barrel, trigger, trigger bar, slide, end plate, and sights, you can. Just use any of the readily available gen 3 aftermarket parts. 

  The trigger in the Rapture is decent. It starts with a flat face with a little hook on the end. Yes, there’s the little safety inside the trigger. The flipper safety seemed a bit strong, but it didn’t keep the trigger from being pulled, so it works fine. I do like the little hook on the end of the trigger. It helps a little bit to keep my finger from sliding all the way down and rubbing against the inside of the trigger guard. Trigger pull is decent, for these types of striker fired pistols. The Rapture’s trigger does have a decent break, not mushy like some gen 3 triggers are. Trigger pull weight was 5.5 lbs on my trigger pull gauge. I thought the weight was decent for a carry gun. Besides, if you want it lighter, there are plenty of parts on the market to make it anyway you want.

  Sitting on top of the GForce Rapture’s frame, is a fantastic slide. Yes, the slide looks kind of blocky, until you get a good look at it. It has front and rear angled cocking serrations, These are fairly deep cut, not overly sharp, and slightly deeper at the top. These serrations work extremely well. They blend into the frame nicely and look good. Inside the slide is a nondescript barrel and dual recoil spring system. Back on top of the slide are metal fiber optic iron sights. The front is red, and the back are green, both feature anti-glare serrations. The Rapture uses standard Glock sights, a big plus if you want to change them out for higher profile ones. Why would you want higher profile sights? Because the Rapture comes cut for optics! But it doesn’t stop there. The Raptures slide is cut directly for both the RMR and RMSc (sheild) footprints. GForce Arms also includes locator pins to use with either optics. These pins also help minimize optic movement under recoil. A nice optic cover plate comes installed if you don’t wish to mount an optic on the Rapture.

  I ordered up a kydex holster for the Rapture. Once it showed up, I began carrying the Rapture on and off. The gun carries nicely with an IWB holster. Being that the Rapture is not big, that helped. Probably what helped the most is the thinness of the Rapture. One thing I noticed while carrying the Rapture was how the magazine's pinky extension stuck out more than I liked. GForce doesn’t have an option for a magazine without the pinky extension. So I proceeded to dremel off the extension on one of the magazines, making it flush fit. This helped a lot in how noticeable the pistol was under just a T-shirt. I thought the sandpaper texture might cause some discomfort when carrying. To my surprise, the texture didn’t feel bad against my skin. It is only a little bit noticeable to me. The Rapture makes a decent carry gun.

Modified flush fit magazine

  The Rapture comes with 2 magazines. I would have liked to see it come with 3. But since the Rapture can be found for under $350, that didn’t hurt me too bad. Plus, extra magazines are only $25. Both the magazines sent with the Rapture are steel and hold 12 rounds each. Both have that aforementioned pinky extension. The Rapture magazines are proprietary. Also not a deal breaker for me. Remember, P365 mags are proprietary also. I have had zero problems with the Rapture magazines. 

  Shooting the Rapture was a pleasure. The first thing I noticed was that it didn’t have as much felt recoil. Or at least less than I was expecting from a pistol this size. I shot it with the fiber optic sights. Those sights are really easy to pick up and fairly fast. I then proceeded to mount an optic up top. I used the RMR cut option and installed a Swampfox Liberty. With this combo, the factory iron sights just peek above the optic. You can still use them as back up irons, but just barely. I ran all different weights of 9mm through the Rapture, with both the irons and an optic. The only problem I ran into was some factory reloaded ammo that wouldn’t go into battery. Not the Rapture’s fault because all the factory new ammunition I used ran flawlessly. So I would say the Rapture has more of a match chamber. In fact, the pistol ran flawlessly with zero malfunctions through about 750 rounds. No, I didn’t clean it either. I didn’t run an accuracy test on the Rapture, but I did run a dot torture with it at 5 yds. The Rapture performed well, I didn’t. I also set up my A-Zone steel at 50 yds. The Rapture didn’t have any problems reliably ringing it. So I’d say it’s more accurate then I am. When shooting and manipulating the Rapture, I also noticed that it doesn’t have any sharp edges on it, at least if you don’t count the front sight. Overall, the Rapture exceeded what I was expecting

  I really hope the GForce Arms Rapture stays around. It is a very well made, American, micro compact pistol. Plus it is affordable, hitting the streets at under $350. It has 12 round capacity, is thin, has lots of Glock compatibility, comes with 4 backstraps, and can mount any of the common red dot optics. I feel you can’t go wrong with the Rapture. Check it out at GForce Arms or your local dealer.

Firearms Insider Reviews - Key Points

Claim to Fame:

Sub-Compact handgun with a lot of Glock compatibility

Target Market:

Those wanting a quality micro-compact firearm at a decent price

Features, Benefits, and Specifications of this product:

  • Caliber: 9mm Luger

  • Capacity: 12+1

  • Comes with 2 Magazines

  • Frame Material: Textured Glass Filled Polymer

  • Comes with 4 Backstraps: 0°, 2°, 4°, & 6°

  • Optic Cut for RMR or RMSc footprints

  • Sights: Fiber Optic - Red Front / Green Rear 

  • Barrel Length: 3.25"

  • Trigger: Flat Face with hook

  • Weight: 22.5oz with empty magazine

  • Width (Overall): 1.12”

  • Height: 4.7” without magazine

  • Length (Overall): 6.62” 

  • Highly Glock Compatible, most parts are interchangeable 

  • Uses Glock sights

  • Comes with carry case that’s cut for optics

  • Made in USA

  • Assembled and tested in Reno, NV

  • Lifetime Warranty 

What other aesthetic options or finishes are available?

Flat Dark Earth 

What others are saying?:

Nothing found as of publishing`

Link to other reviews:

Outdoor News America

Price point:

MSRP = $379.00

Retail = $329.00 at Global Ordnance or Guns.com 

I need it now! Availability:

Global Ordnance, Guns.com, or your local FFL

Our Rating:

Pros:

  • Price

  • Glock compatibility

  • Optic cut with pins

  • Fiber Optic steel sights

  • Backstraps

  • Large mag release button

Cons:

  • No accessory rail

  • No flush fit magazines

Score: 8.00 Great

Favorite Link:  SwampFox Liberty Review   

Lone Wolf Dusk 19

Ammo for this review was sponsored by our friends over at

Target Barn

  Lone Wolf Arms has been making Glock compatible handguns for years now. They recently introduced their Dusk 19 handgun. The Dusk is their newest generation of pistols with a ton of great features added in. The Dusk 19 line has a bunch of different options, from a “stock” style pistol to threaded barrels with suppressor height night sights. Lone Wolf also has various color options for the Dusk 19. They sent out one with a FDE slide and ⅓ co witness sights for us to review. 

   When I say the Dusk 19 is Glock compatible, here’s what I mean. The Dusk 19 is compatible with G19 parts, and therefore, uses those styles of parts. But, it is definitely NOT a G19. Yes, the size is similar, but that is about it. The Dusk 19 specs are below in the Features & Benefits section, so you can read them there. However, there are some interesting features of the Dusk 19. It uses a Gen 4 magazine release. This gives it the ability to be reversed from side to side. So if you’re a lefty, Lone Wolf has you covered. The Dusk 19 also has Glock Gen 3 parts compatibility. It also uses G19 magazines. I used a variety of mags, including the 2 KCI mags that came with the pistol. They all functioned flawlessly in the Dusk 19. Lone Wolf also gave the Dusk a 19° grip angle. I’m a big fan of the 19° grip angle, as the pistol points really well for me. In addition to the grip angle, the Dusk also includes both a curved and a straight backstrap. I left the smaller, flat one on the pistol as my hands are not giant. If you need to mount accessories up front, the Dusk 19 has a standard picatinny rail. This makes it more compatible with various lights, as well as other accessories. 

  Lone Wolf took the most common aftermarket frame upgrades and included them on the Dusk 19. Not just a few, either, but a whole bunch. The first thing I noticed about the Dusk 19 was its aggressive texture. I love aggressive texture, mostly, and the Dusk 19 did not disappoint. This texture is everywhere. Both on the grip panels, the front of the grip, and on the 2 backstraps. It is also on the frame where you would rest your thumb or trigger finger. I really like this aspect for the ability to “feel” where your trigger finger is when not shooting. A note about those 2 backstraps, they have a place for a spare 2032 battery built into them. That way you can always have a spare battery for your optic. The Dusk 19 also received a decent beavertail to help with that annoying slide bite. The grip has a built-in magwell, not a huge one, but better than not having one. Lone Wolf also put a pretty good size undercut in the trigger guard to help you get a higher grip. Mounted up top the frame is a slightly extended slide release. It's not one of those that sticks way out, but it gives just enough to easily use. Lastly, the Dusk 19’s grip, as a whole, feels very compact in the hand. This grip is fairly short front to back, and not very wide. It even fits smaller hands pretty easily. Lone wolf did a great job designing the Dusk 19’s frame.

  Features still abound on the top side of the Dusk 19 too. The slide has front and rear manipulation serrations. These serrations are deep enough and sharp enough to use in any condition mother nature might throw your way. There’s a textured cover plate. The texture on the plate probably helps reduce glare, if nothing else, it looks good. Moving to the sights, the Dusk 19 has Night Fision ⅓ co-witness irons. The front sight is tritium and has a green ring around it. The rear is blacked out with serrations. In daylight, the green ring helps to focus your front eye on the sight. I really like the Night Fision sights, they work well. Now for the kicker, the Dusk 19 comes cut for mounting a reflex sight with a RMR footprint. I like that Lone Wolf is using an “Industry Standard” footprint for optics and not using a plate system. From the factory, it has a cover plate installed that blends nicely to the slide. Moving up front, the Dusk’s frame also has a spacer in it that can be removed. This spacer is for those that want to run a gen 4 recoil system and slide. There's zero reason to do anything with it on this complete pistol. The fit and finish of the Dusk's slide is fantastic. It is nicely machined everywhere. It also fits the frame fairly tightly. This is not something I usually say about stock Glock pistols. This slide to frame fit will also help in the accuracy department. Hand cycling the slide is smooth like butter. The PVD coating on the slide should give it a long life span, not to mention that it looks great! 

  The only functional part left to talk about is the trigger. The Dusk 19 sports a flat trigger. This flat trigger is radiused on the edges, but not a lot. Therefore the trigger’s face has a lot of flatness to it. Lone Wolf also put a decent, wider than normal, trigger safety. The trigger safety is FDE to match the slide, while the trigger is black. It's sharp looking. The trigger safety also operates super easy, so you don't really even notice it. When I tested the trigger's pull weight, it came in at 5 lbs out of the box. After 1000 rds, it's about 4.5 lbs now. It has a decent trigger pull too, for a glock style trigger. There is very little stacking and it has a clean break. A notable nice feature of the flat trigger is that it breaks at approximately 90°. I was pretty happy with the Dusk 19's overall trigger performance. 

  As with everything, nothing is perfect. I did have a few minor things happen during testing. Most of the testing was done with 124g CCI Blazer Brass 9mm supplied by Target Barn. Around the 250 round mark, I had a stovepipe. No big deal. Then around the 900 mark, I had another one. This second one I attributed to the gun being dirty, since I hadn't cleaned it at all. The trigger also started getting gritty around 900 rds. So I decided the gun needed cleaning. After that, it ran fine again. I ended up running about 7 different types, and bullet weights, of 9mm through the Dusk 19. All of the ammo was brass cased. It functioned great with all the different ammunition types. I figure that only having 2 out of 1000 problems says a lot about how good the Dusk 19 is. 

  I really used the Dusk 19, no easy days for it. It went to a Steel Challenge match and ran better than the shooter, with iron sights. The aggressive grip really lets you get a hold on the gun and helps with managing recoil. Since it fits in G19 holsters, I had plenty on hand to use. I used an OWB for Steel and some drills. Then I install a red dot at the 500 rd mark. Gun still ran great. I ran some training drills using an IWB holster. Then I proceeded to shoot some Dot Torture drills. This gives me an idea how accurate the gun is, and how well I do at speed. Well, the Dusk 19 is pretty accurate, from what I saw. The decent trigger pull also allowed me to get some fairly quick, accurate shots. The Dusk's grip angle also makes it easy for me to pick up the red dot. The gun just shoots great and feels really good in my hands. 

  I also carried the Dusk 19. It carries and hides nicely. But that grip texture can get to your skin after a full day. That's the only flaw I found with the texture. But I'd rather have a decent grip texture, than have a smooth texture that feels nice on the skin. As mentioned, since it fits G19 holsters, your options are endless. Some of the previous Dot Torture drills were done from a IWB carry holster. I have no problem carrying the Dusk 19 since it is a reliable firearm. 

  If you are looking for a pistol that has a bunch of upgrades already done, the Lone Wolf Dusk 19 could be it. Yes it costs a little more than a stock G19, but you don't have to spend money on upgrading it. So you save in the long run. It functions great, has night sights, and just feels good in the hands. It really is a kind of “do all” handgun. Head over to Lone Wolf Arms if you want to check out the Dusk 19.

Firearms Insider Reviews - Key Points

Claim to Fame:

Compact pistol with lots of options built in

Target Market:

Those wanting a factory compact handgun with included upgrades

Features & Benefits of this product:

  • Reflex Sight Ready (RMR cut) with DUSK optic cover plate included

  • Interchangeable flat & rounded backstraps with 2032 spare battery holder

  • 19° grip angle

  • Stainless steel PVD coated barrel with DUSK profile

  • Flat trigger

  • Undercut trigger guard

  • Front & rear serrations for ease of chambering and press check

  • OAL: 6.95" 

  • Barrel Length: 3.90”

  • Height (without sights): 4.61" 

  • Non-Threaded Barrel Height (with sights): 4.94"

  • Upper Width: 1.00" 

  • Lower Width: 1.14" 

  • Magwell Width: 1.23" 

  • Weight (without magazine): 19.8/oz. 

  • Caliber: 9x19

  • LWA Nitride SS Guide Rod & End Cap

  • LWA Reversible Magazine Release Button 

  • LWA Extended Slide Stop Release 

  • LWA Extended Takedown Lever

  • Night Fision lower ⅓ sights: tritium front, serrated rear

What other aesthetic options or finishes are available?

There are a bunch of styles available - https://lonewolfdist.com/firearms/complete-pistols/dusk-19/

What others are saying?:

5/5 stars at LoneWolfArms

An Excellent pistol

The Dusk 19 really elevates Lone Wolf. Likely the most ergonomic frame out there, flawless performance. The trigger is carry-appropriate,

Link to other reviews:

The Truth About Guns review

Price point:

MSRP = $649.95 - $699.95

Retail = Approx $600

I need it now! Availability:

Lone Wolf Arms or your local Dealer

Our Rating:

Pros:

  • Ergonomics

  • RMR cut

  • Comes with decent night sights

  • Glock compatibility

  • Grip size

Cons:

  • Couple of malfunctions over 1000 rounds

  • Texture can be rough when carrying

Score: 8.00 Great

Vosteed Thunderbird

  When it comes to everyday carry pocket knives, there are a ton on the market. All of them have various features for you to choose from. Vosteed makes a good selection of knives to fit whatever you are looking for. The Vosteed Thunderbird is one of those edc knives that has plenty of features. The Thunderbird’s features will rival knives that are priced much higher.

  Vosteed’s Thunderbird is a unique knife. Not in the way it looks, or the materials used, but in the way it opens. The Thunderbird uses Vosteed’s “Trek Lock” opening system. Trek Lock is a multi-opening system that allows one to open the knife in 4 or 5 different ways. One is by using the thumb hole. Another is using the normal flipper, located on the spine of the knife handle. And yet another way to open it, is to use the front flipper, located on the lower front of the closed Thunderbird. Then, since the knife uses a button lock mechanism, one can push the button and flip the blade out. Lastly, which isn’t really a flip method, is to just fold the knife out like you would an old school lock blade. To close the blade, just push the button and close it however you see fit. I would like the button lock to be a little harder to push. I just feel that little bit of extra might help keep the blade from wandering out when in the pocket. Not that it did this, but I can get the blade to open by just flicking the knife downward, something I can’t always do with button lock knives. If you like to fidget with your knife, the Thunderbird can’t be beat for that. I even find myself opening and closing it for no reason. As you may, or may not know, I am a big proponent of multiple ways to open a knife. Mainly because if you need to open a knife in some odd place, or body position, your main way of opening it might not work. So the Thunderbird is a dream come true for me. 

  Blade steel is an important quality of any knife. The steel Vosteed chose for the Thunderbird is top tier. This particular Thunderbird uses M390 steel. M390 is pretty much labeled a “super steel”, at least for knife making. It is super tough and durable with high edge retention, which leads to a high wear resistance. What that means for you is that the Thunderbird’s M390 blade will stay sharp for a very long time. M390 also has high corrosion resistance. So when you are actually using it, if it gets blood, or other bad stuff on it, it won’t damage the blade as quickly. One downfall to all of this, is that it takes a lot more effort to sharpen the Thunderbird. I’m okay with this trade off since the knife stays sharper longer. Vosteed also offers some versions of the Thunderbird with Elmax or S35VN blades. I don’t think you can go wrong with any of the blade steel offerings of the Thunderbird.

  The handle of a knife is also important. Vosteed chose a Laminate GT-Mascus, or in simple terms, a G10 handle with a topographical pattern. This topo pattern is a black background with blue topo lines. Besides looking great, the Thunderbird’s handle shape is useful. The handle's spine has a slight curve to it. This makes it fit the hand fairly nice, even though it is a fairly sleek knife. It also has a decent choil built into the handle. That way you can really dig into the handle for a tight grip. The back flipper tab also meets up with this choil, extending it out a tiny bit farther. One notable thing is that the flippers jimping is slightly noticeable in the front of the choil. This gives the knife a little better grip on that index finger. The handle doesn’t have any real texture to it, but being G10, it still gives a great grip. Vosteed also designed the Thunderbird with a deep pocket clip. The clip’s mounting is inlaid so it doesn’t bind up when putting the Thunderbird in your pocket. It is reversible, but both options are tip up carry. Lastly it has a brass spacer at the rear. The spacer also includes a place to install a lanyard. The brass nicely sets off the color scheme and helps balance the Thunderbird out nicely.

  The last important design of the Thunderbird is the blade profile. Vosteed gave the Thunderbird a curved tanto style blade. It also has a harpoon style top structure. These two designs give the Thunderbird a really good “piercing” ability. More important to me, is that the tanto’s tip melds nicely with the belly of the knife. This makes it more useful than a regular tanto style blade. On the spine of the blade there is some jimping. The jimping is the Thunderbirds one downfall. It is fine and not deep enough to really aid in use. The Thunderbird also uses a shallow hollow grind, which gives it some good slicing ability. I typically don’t like tanto style blades, but the Thunderbird made me believe that there are good style tanto blades out there.

  Even though I haven’t had the Thunderbird for very long, I have used it. It is really good at just about everything. From slicing gummy bears, which is the real test of a knife's sharpness, to scraping off stuff from hard surfaces, the Thunderbird just performs. As Vosteed states, this is the fidget king when it comes to knives. The knife is SHARP. It also stays sharp thanks to the M390 blade steel. I’ve cut a lot of cardboard too, and the Thunderbird keeps slicing through it like soft butter.

  If you are looking for that do all edc knife, the Vosteed Thunderbird might be it. It has an excellent blade material and shape. There are multiple ways to open it, thanks to its Trek Lock. It feels good in the hand and has a silky smooth action thanks to its ceramic ball bearings. At $135, it is priced far below what you would expect to pay for something of this quality. So go check out the Vosteed Thunderbird, they probably make a version that you’ll like..

Firearms Insider Reviews - Key Points

Claim to Fame:

EDC knife with quality blade steel and multiple ways to open

Target Market:

Anyone wanting this style of quality in a folding knife

Features & Benefits of this product:

  • Trek lock opening - Front Flipper | Back Flipper | Thumb Hole | Fuller

  • Blade Length: 3.25" | 82.55 mm

  • Overall Length: 7.73" | 196.34 mm

  • Blade Width: 1.10" | 27.9 mm

  • Blade Thickness: 0.118" | 3.00 mm

  • Blade Material: M390

  • Blade Grind: Compound

  • Blade Style: Tanto | Harpoon

  • Blade Finish: Black Stonewash

  • Hardness: HRC 60±2

  • Handle Length: 4.48" | 113.79 mm

  • Handle Width: 1.17" | 29.72 mm

  • Handle Thickness: 0.472" | 12 mm

  • Handle Material: GT-Mascus (G10 topo pattern)

  • Weight: 3.34 oz | 94.70 g

  • Pivot Assembly: Caged Ceramic Ball Bearing

  • Pocket Clip: Tip-Up Reversible | Stainless Steel

  • Knife Type: Manual Folding

  • Backspacer Material: Brass

  • Button Material: Stainless Steel

What other aesthetic options or finishes are available?

https://www.vosteed.com/collections/thunderbird

What others are saying?:

4 out 5 stars at Vosteed.com

3.25" m390 thunderbird

Very pleased with this knife. I also have a Vosteed Gator that I love. I like this smaller version of the thunderbird and find it the perfect size for daily carry. Every deployment option works exactly as it should. The knife came sharp (although I sharpened it to my liking) and perfectly centered. No issue with the button lock unscrewing or with the "spine whack" test that have been a topic for the previous thunderbird model. I wish the detent was a little stronger; however, it is a great knife that will perform well for daily tasks. Highly recommend it.

Link to other reviews:

Nothing But Knives

Price point:

MSRP = $135.00

Retail = Same

I need it now! Availability:

Vosteed

Our Rating:

Pros:

  • Multiple ways of opening

  • M390 blade steel

  • Button Lock

  • Ceramic bearings

  • G10 handle

  • Looks

Cons:

  • Button lock could have a little more strength

  • Shallow Jimping

Score: 8.50 Great

Favorite Link:  Viridian RFX 45 review

SEARCH