True Blue Gun Oil & Grease

  True Blue gun oil is a fairly new product in the firearms industry. The company making the gun lube is Dumonde Tech. Dumonde Tech has been making lubrication products since 1985, so they are not new to extreme lubricants. In fact most of their products are for extreme duty racing engines and such. Dumonde Tech sent me some of the True Blue gun oil and Gun grease to try out. At first I thought they were just sending samples, but when they arrived, it was full retail product sizes. The oil comes in a nice applicator bottle, and the grease comes in a nice little tub.

 Since oil is really hard to do a scientific review on, I will tell you my results. Lucky for me, I was assembling a Polymer 80 receiver and slide a little after getting the oil. So, the only lube used on that P80 has been the True Blue gun oil and gun grease. Well, it works. If you read my P80 pf940c review, you will find out that the slide to frame fit was extremely tight. I put some of the True Blue gun oil on the frame rails and slide. I noticed that it was easier to move the slide back and forth. I have since only used the True Blue gun grease and oil on this firearm. I put around 300 round through the pistol before I took it apart and looked at it. It was dirty, but still functioned fine. I probably put another 200 rounds through it before doing a rough cleaning. All I did was wipe the dirt off with a shop rag, and that was enough to clean the pistol. So this time I put some of the Gun grease on it. The grease is pretty thin, but stays on the parts quite well. The pistol works fine with the grease also, but I thought the oil was more appropriate.

 I ran the gun oil on other firearms too with no problems. This oil is pretty slick to the touch also. I squirted some on my SBR bolt and ran some rounds through it suppressed. Guess what, it’s gun oil, so it worked fine in that also. But the real test was the suppressed full auto .22lr. This thing gums up everything. Before using the True Blue gun oil, only one other oil would get you past 500 rounds without a thorough cleaning. But the True Blue came through like a champ and let me run the gun past the 500 mark! Cleaning was easy also, but I did have to scrub some from all the 22lr lead build up. I can say that the oil holds up to heat very well because of using it in the automatic.

 Now I’ll get in to some of the technical stuff. Both of these gun products benefit from Micro Resistant Complex Compounds (MRCC for short). These MRCC’s help reduce friction and increase the adhesion to metal parts. It also makes the oil “migrate” around surfaces. You can actually see this to some extent. Just put a drop of the oil on a metal surface and come back later, you will see how the oil migrates over the part. The oil and grease also have very low coefficients of friction, hence why they are slippery. The grease states “10 times slipperier than Teflon”.

 The next feature of the grease and oil is “Polymerization”. This is harder to explain, but I actually have seen it first hand. What the polymerization does, is turn the oil into a solid at extreme temperatures. So it polymerizes to form a micro thin, hard, slick coating. It basically doesn’t burn off like conventional gun oils. Let me explain what I noticed. When disassembling the machine gun, it didn’t feel like it had much oil on it. But yet the bolt was still very slick. I wiped the tiny bit of oil off, and it was still slick. It kind of looked like it had an opaque film layer on it, which I guess was the polymerization of the oil. To clean this off, I just used some Hoppes #9, but any gun cleaning solvent should work.

 I can’t really say much else about the Dumonde Tech, True Blue gun oil and gun grease. But, it does work, and work well. The only problem I see with it is, you can’t find it anywhere. Besides that, I will be buying some more when I run out. It doesn’t take much oil to lube up a firearm, so it may be awhile before I have to order more. So if you’re looking for some decent gun oil, give this stuff a try, I was pleasantly surprised.

 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Advanced Gun Oil & Grease

Target Market:

Gun Owners, Ranges, Police, GunSmiths

FNBs (Features & Benefits of this product):

  • Odorless

  • Waterproof

  • Migrates around parts

  • Very Low coefficient of friction

  • Polymerization

What other aesthetic options or finishes are available?

True Blue Gun Grease

What others are saying?:

TRUE BLUE is one of the best lubricants for firearms on the market today.  I am a gunsmith and avid hunter who has used a lot of different products trying to find the best lubricant for myself and my customers. We have been using TRUE BLUE for about 9 months. I am so happy with this product that I have thrown out all others. This is the only Lubricant anyone would find on my bench at West Coast Armory and Bellande Custom. All of my weapons, the Gun Range Rental firearms now use TRUE BLUE. They all run smoother and cleaner than any other products we used. Customers that followed my recommendation to use TRUE BLUE have all come back with positive feedback and have switched. TRUE BLUE is now our best selling lubricant. We love their new cleaner also. I give this product a 10 out of 10. 1/8/17

Tyler J. Bellande, Bellande Custom / West Coast Armory – Bellevue, WA

 

“I have gone through approximately 15,000 rounds of ammunition in my Tactical Solutions X-Ring rifle and my Ruger Mkiii 22/45 in practice and competitions. I have been using Heater Grease in the X-Ring and it has run flawlessly. This is by far one of the cleanest lubricants I have ever used. I clean my weapons every 3 or 4 thousand rounds and the carbon and grime wipes right off.”

Jeffery Packer, MSG (Ret), Executive Director/Chief Curator Idaho Military Museum. Tactical Solutions Shooting Team

Link to other reviews:

The GunMag.com

Price point:

MSRP = $10.99 - $14.99

Retail = $14.99

I need it now! Availability:

Amazon or Rainier Arms

www.mylifeatspeed.com

Our Rating:

Pros:

  • Odorless

  • Applicator bottle

  • Adheres to metal

  • Easy clean up of oiled parts

  • “Wetting” of parts

  • Made in U.S.A.

Cons:

  • Availability

Score: 8.50 GREAT

85.jpg

 

Chad's Favorite Link:  US Tactical Supply

 

 

Bushnell Pro 50 Lumen Flashlight

Written by: Zane M.

  If you listen to the podcast, you probably know by now that I’m a fan of having a really bright light. This isn’t one but that’s not it’s purpose. I originally picked up the bushnell pro 50 lumen pocket light for administrative purposes when burning the battery on my 800/1000 lumen light just wasn’t necessary. It uses a single AAA battery and battery life is decent. The light is small, almost too small but is still useable. The light sat in my pocket for a few years and had that been all it done this would have never been written.

  About 6 weeks ago I lost this $15.00 light and didn’t think anything of it. I figured I’d replace it and move on with my life. Then about a week ago I was mowing my gun range and found it, on the ground, packed with dirt. I knocked the dirt out and set it on the shooting bench and finished mowing. Since it was also raining the light got cleaned naturally if you will. For some reason I decided to click the tail switch before I threw it away and it came on. 5 weeks in the elements and this this was still ticking.

  If you’re looking for a cheap admin light for simple tasks this might be the light for you. 

 

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

It’s a light. Nothing special 

TARGET MARKET:

Anyone who needs a admin task light 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):

  • CREE LED technology
  • Momentary On switch
  • Aircraft grade aluminum
  • Pocket Clip
  • Impact-resistant construction
  • Powered by 1 AAA battery (Duracell battery included)
  • Tested to ANSI FL1 Standards: 50 Lumens, 2 hr 15 min Run Time, 32 M Beam Distance, 2 M Impact Resistance
  • Durable and uses AAA batteries 

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

None 

What others are saying?:

From Walmart.com

Excellent Quality

Average rating:5out of5stars, based onreviews

12/29/2016

by Charles

This was a Christmas present to me from my Uncle and I've had for over a year. This flashlight is perfect to carry on you. With it being metal, it lasts longer and the clip in very nice and has a sturdy design, not easy to break. The flashlight is very nice especially because it only takes one AAA battery and you rarely need to change the battery (depending on how often you use it). This f This flashlight has a LED so, you never have to worry about replacing it. It is perfect for if you're looking for something in your car at night or just walking through your house at night. It is very small and can fit in any pocket. I highly recommend it because if you ever need a flashlight, you've got one in you pocket that is very bright and very small.

Price point:

MSRP = ???

Retail = $15.00 - $34.84

I need it now! Availability:

Amazon or Walmart

Our Rating:

Pros:

  • Durable
  • Cheap
  • Uses a single AAA battery

Cons:

  • Dim
  • Small 

Score: 7.0 GOOD

70.jpg

You Suck, It's not the Gun

Written by: Kenny O.

  How many times has someone said “there’s something wrong with this gun” yet it performs perfectly in someone else’s hand? This is where You Suck, It’s Not The Gun was born. People are always ready to blame an equipment failure when there are certain aspects at play that cause them to fail. Recently, I had the opportunity to train with Erik “Trek” Utrecht, owner of Michigan Defensive Firearms Institute, MDFI, and learn how and why I suck. The gun just does what it’s told.

  Trek starts out by giving us some background, interspersed with movie quotes every now and again, and tells us what to expect for the day. Hearing that we will only be firing 115 rounds for a full day seems incredulous at first. How can so few rounds make one a better shooter? It all comes down to taming the wolves. After a 10 round qualification, at 10 yards, the day really gets going. Trek tells you to bury that qualification target somewhere that you won’t see it for the rest of the day. What comes next is the introduction of the two wolves that need to be tamed.

  Obviously, these are not real wolves. They are analogous to the controls that we need to master to be better shots. They are referred to as the Sight Wolf and the Trigger Wolf. The illustration that is set up is one of two children, one adolescent and one teenager. The younger of the two is kind, gentle, and obedient. This is the Sight Wolf; he wants to behave. The Trigger Wolf is not the same. He is the bad seed, rebellious, hellion of a child that will buck authority and society at every opportunity. The challenge is teaching this Wolf to obey and not corrupt the good wolf. The first way to tame him is to take your time with him. The motto of the class therefore is there is no time limit. It doesn’t matter how fast you can miss a target.

  Starting at the 1 yard line, the fundamentals get refined making many of the students 1 yard snipers. Get the T-shirt, it should be good for a laugh. Being a 1-yard sniper doesn’t sound impressive, but it helps to build on the fact that good shooting is a possibility. After a break, Trek continues to emphasize how the wolves can be tamed and becomes a chef. His shooting recipes for wolves will highlight your strengths and weaknesses on the firing line. After the first recipe or two, shooters really start to see where they need to improve or continue what’s working for them.

  Trek might just be the Bobby Flay of the shooting world because his recipes can be magical. This is evidenced at the 3 and 5 yard lines with more drills. All these drills use a 1” dot as the target. There is something to be said about using a small target to aid in improvement. It is also incredibly rewarding when you’re able to keep your shots inside of the dot. By the end of the day, after all the recipes, stories, and wolf warnings have been shared, it’s time to reshoot the 10 yard qualification. After only firing about 100 rounds, many of the students saw a significant improvement in their shooting. I myself was able to cut my group size in half from morning to afternoon.

  I strongly recommend anyone that wants to improve their shooting skills to take this class. It is not sexy, cool, or tactical. It is practical though and well priced at $175. Every bullet that a shooter fires, whether on the range or on the street, has a lawyer attached to it. Wouldn’t you want the confidence of knowing your rounds are going where you want them to go? I know I do and I consider this a small price to pay to help me do that. Trek is a great instructor who keeps what could be boring and mundane entertaining and enlightening. He is not overbearing, and he has a good sense of humor. Throughout all of that, safety is paramount. I was not in fear of injury like I have been in other classes. It was clear that I suck, it’s not the gun.

  I learned valuable lessons that day of how to suck less so I can be a better shooter.

Safe Life Defense Soft Body Armor

 Safe LIfe Defense contacted me to see if I would review some of their soft body armor. Of course the answer was an astounding YES. Safe LIfe did supply the armor for free. Safe Life Defense has a bunch of different styles of carriers and armor combinations. Their website has a wealth of information on protection levels, care, and other questions one might have on body armor.  The one reviewed here is the Concealable Enhanced Multi-threat level IIIa+ vest.

  What do you do when you first receive a vest, try it on of course. I immediately noticed the comfort. The mesh style liner that Safe Life uses is actually very comfortable. It even kind of slides around over a T-shirt. This helps to not pull up an undershirt or whatever the armor is worn over. The vest also has 6 “comfort straps” that use hook & loop, with elastic between each end, to adjust each side and the top for fit and comfort. One strap for each shoulder adjustment, and two on each side. I have a bit of a belly, and this vest adjusted and fit very well. I did notice that when I crouch down that the vest did tend to rise up a little, but I think this is pretty common.  If you are concealed carrying IWB, the vest does get in the way of the draw.  I think practice drawing your firearm, should remedy this. Some of this may be due to the fact that the sides of the vest wrap around your sides. 15% more protection than other vests, according to Safe Life. If someone were to ask me about comfort, I’d give it a thumbs up.

Inside of vest on top of ballistic panel

 I proceeded to disassemble the vest. The outer shell is made from a ripstop polyester and has proven to take a beating from being shot at. The seams won’t let you down either. We put a few rounds through the edge seams, then I tried to unravel them and pull them apart. Well, that didn’t work for me. So don’t worry about the seams coming unravelled and the inner panel falling out. The inner panel is where all the magic happens. This is the ballistic portion of the vest. It is constructed of a red color outer fabric with the Kevlar sheets inside. The ballistic panel is about ½”-¾” thick. The seams of the panel are welded together.  The outer layer of the ballistic panel is also constructed of a ripstop fabric. This helps aid in the fabric not coming apart when the vest is stabbed or shot. When shooting at the vest, we did have a .357 round blow out about an inch of the ballistic panel seam, but it stopped the round and didn’t cause the vest anymore damage. The shot was also very close to the edge of the panel.  After shooting the vest, I then tore into the inside. Inside the red fabric are super thin sheets of kevlar, stacked one on top of each other. How many, I don’t know, but it works. Also inside the panel is a piece of some sort of foam. This is the side that goes up against your body. This has to be for comfort and also to help ease the sting a little if one were to actually get shot while wearing the vest. The vest does use a different front and rear panel size, so you won’t be able to move the rear panel to the front, I tried! These panels fit inside the carrier by way of a low profile hook & loop seam/flap. Another nice feature is the ability to put rifle/hard armor plates into the front and rear outer plate pockets on the carrier. These also use a hook & loop closure to keep them closed up. I really like the construction of this vest. Through all the testing, it held up remarkably well.

Rifle Plate pocket

 Now I will get into the vests stopping ability, or at least what we threw at it. I made a wood backed target stand, installed a USPSA target on it, then placed the vest over the target. I am just going to list what we shot the vest with, and then what was stopped by it, all were shot at 10yards.

Ballistic panel welded seams

Shot through seam, this might hurt.

Blowout from .357 magnum round, seam still partially intact

  • .22lr rifle stopped

  • 9mm 5” pistol 115gr fmj stopped

  • 9mm 5” pistol 124gr +P HP stopped

  • 9mm 5” pistol 147gr FP stopped

  • 357 magnum 6” revolver 158gr JHP stopped

  • 357 magnum 6” revolver 125gr FMJ stopped

  • 40s&w 4” pistol 180gr FP stopped

  • 40s&w 4” pistol 165gr +9 HP stopped

  • 41 magnum 6” revolver 210gr JHP stopped

  • 45acp 5” pistol 185gr +P HP stopped

  • 45acp 5” pistol 230gr FMJ stopped

  • 12 gauge 3” buckshot stopped

  • 12 gauge 3” slug stopped

  • 17HMR rifle 20gr FMJ Didn’t stop

  • 30 Carbine 110gr FMJ Didn’t stop

  • 300blk 10.5” 220gr Didn’t stop

I didn’t expect the vest to stop the 17hmr, 30 carbine, or the 300 blk, but we tried anyhow. The vest was also shot multiple times with all the “stopped” cartridges without any of them going through the kevlar. Some of the more potent cartridges did leave a small dent in the wood target backing, mainly the 357 magnum and 12 gauge slug. Since the vest is also rated for some stab protection, I tried stabbing it with a spire point knife. I wasn’t able to stab through the kevlar.

Kevlar after being shot multiple times

Seams of vest after being shot a few times

Bullets pulled from inside of ballistic panel

 Everyone that helped me test the armor was pleased with the outcome. In my opinion, I would trust wearing it with my life, at least for what it is rated. Plus, if you actually get shot while wearing this armor, Safe Life will replace it free, as long as it is in it’s 5 year lifespan. Speaking of lifespan, there is a manufacture date on the ballistic panel, and Safe Life rates the armor to be good 5 years from that date. The 5 year date is pretty standard for soft body armor.

Side view when wearing armor

 If you need or want soft body armor, look into the team at Safe Life Defense. I was thrilled at the opportunity to see what this IIIa+ armor could do, and it didn’t let me down. If you can ever get the chance to see or shoot body armor yourself, do it. It really gives a person a better idea of what armor actually will stop.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Level III+ rated soft body armor

Target Market:

Police, EMS, Security, Instructors, or anyone wanting soft body armor

FNBs (Features & Benefits of this product):

  • NIJ Level IIIa+

  • Bullet, strike, slash, stab & special threat resistant

  • Special threat resistant: Liberty Civil Defense 9mm & FN 5.7×28 40gr

  • Spike/Stab Rating: NIJ Level 1 up to 36 Joules of force

  • Constructed with custom Kevlar

  • Full side protection

  • Ultra-concealable

  • Engineered for comfort and maneuverability

  • Cooling mesh liner

  • 10 Point adjustable with 4 Comfort Straps

  • 2 low profile pockets for level IV rifle plates

  • Water resistant ripstop polyester carrier

What other aesthetic options or finishes are available?

Sand or white

Various other styles

What others are saying?:

https://safelifedefense.com/reviews/

Link to other reviews:

AmmoLand

Price point:

MSRP = $499.00

I need it now! Availability:

Safe Life Defense

Our Rating:

Pros:

  • Comfort Straps

  • Rifle plate pouch

  • Vent liner

  • Comfortable to wear

  • NIJ IIIa+ rated

Cons:

  • Heavy

  • Hot

Score: 8.00 Great

80.jpg

 

Favorite Link:  US Tactical Supply




 

Self Defense Insurance

First I am not a lawyer nor an insurer. The information in this article is intended to be used for informational purposes only and is not intended to be legal advice or self-defense insurance advice.

  • YOU must perform your own research and determine which, if any, will be applicable to you.

 

You have just used your sidearm to defend your life.

You have just had the fight for your life, now you are in for the fight of your life.

Are you ready?

 

Defending yourself from using deadly force can cost a lot of money. Some recent instances cost the over $100,000 and, in one case, over $2,000,000. Not everyone has the funds available to cover the costs of a trial, especially when you consider attorney fees, court costs, expert witnesses etc. This is where self-defense insurance plans come into play. There are several companies offering insurance offering various degrees of coverage at a wide range of costs. Not all insurance plans are created equal nor do they provide the coverage you may need.

 

When evaluating self-defense insurance companies the following items should be considered:

 

Bail Bond – You need to be prepared as most likely you will most likely be arrested, taken to jail, and will need to post bond to be released. Will the insurer pay up front for the bail? Some will pay at varying degrees up front for bail, while others only after you are acquitted.

 

Lawyer – Lawyers will want up front money prior to taking your case. Some insurers will cover lawyer costs up front (at least in part) and others only if you are acquitted. If you select an insurer who will pay legal fees pending acquittal you will need to ensure you have sufficient savings to cover costs of the legal team. If you select an insurer who will cover the costs up front make sure you know what the limits are as you will be responsible for expenses beyond the covered limit.

  • Keep in mind that most insurers will want access to case files to make an assessment and determine if they will provide additional funds.

 

Lawyer Selection – can you select your own lawyer or is one assigned? If the lawyer is assigned what is their level of familiarity with Self-defense cases? Will the attorney be able to effectively mount a defense for you?

 

Why not keep a lawyer on retainer (just in case)? The issue is you are putting down funds for an event that (hopefully) will never happen. Most lawyers will not take a retainer for an uncertain future case as they will have to account for and track the money for years, or even decades. What happens to your money if the lawyer closes shop?

 

Non-Lawyer expenses – will the insurance cover costs for expert witnesses, investigators, co-counsel etc.? What is the limit for these expenses? Remember, you will be responsible for expenses beyond plan coverage.

 

Non-Firearms Self-Defense – if you do not use a firearm for self-defense (voice command, baton, pepper spray etc.) will that be covered? Some insurers will only cover firearms usage and a person legally carrying firearms have been arrested for verbalizing their INTENT to use a firearm to defend himself.

 

Gun-Free Zone – If you carry in a Gun-Free Zone are you covered? What about other areas you are not permitted to carry (bars, parks, public areas etc.)? What if you carry where it is posted ‘No Weapons’?

 

How is your case handled – When you report a Self-Defense claim will you be referred to someone on staff who has familiarity with self-defense issues or will they refer you to an external third party? Will the focus be on your defense or minimizing expenses?

 

Insurer Solvency – How much money do they have on-hand to pay for your defense? You would not want to pay for insurance just to find out that they do not have sufficient funds to pay for your defense.

 

Civil litigation – You will most likely be sued civilly, will this be covered? What are the limits? Are the limits in conjunction with or in addition to the self-defense criminal limits?

 

In summation, do you need self-defense insurance? This depends on your:

  • Likelihood to need to use deadly force to defend your life

  • Risk aversion preference – how willing are you to assume risks of paying for your defense.

  • Ability to pay costs involved for your defense.

 

Regardless of your decision to obtain legal insurance you need to consider learning about self-defense laws in your state and areas you frequently travel. Self Defense laws vary based on states, counties, cities and you should be familiar with the law. There is a difference between what the right thing to do is and what is legally right to do. Knowing and following the law is extremely important.

 

This table contains data for some most popular/advertised companies that issue self-defense insurance. A few notes on the data:

  • This data is current as of 1/1/18.

  • The data was based on what could be obtained from the issuer’s web site. If other sites had information that was not considered as it was not first hand from the issuer.

  • The NRA Carry Guard is not completed as data on their insurance could not be located on their web site.

  • You can also see additional information on http://vcdl.org/legal-plans.

    • This is from a survey conducted in November 2017.

 

"The Grater GenII" Muzzle Brake

 Trojan Firearms sent me one of their “Gen II, The Grater” muzzle brakes when they sent the straight trigger that was reviewed earlier. Trojan is probably more noticeable for their pistol caliber carbines and California compliant rifles. This muzzle brake is the same one that they install on their “1776” rifle. This muzzle brake was supplied for review.

 The Grater is a nice looking muzzle brake. It has a Black Nitride finish, so it should hold up for a long time. Trojan manufactures the brake out of 4140 steel and it is threaded ½-28. It has 3 chambers to help mitigate the recoil impulse, in which it does a wonderful job. It also comes with an aluminum anodized jam nut, so you can index the brake wherever you like without having to use a crush washer. The jam nut concept is not new, but it does work, and since it is aluminum, you won’t have to worry about messing the threads up.

 More important, is the fact that it has 10 tuneable ports. 2 on top, 2 on each side at 90°, and 2 on each side at 45°. These ports are threaded 6-32 and have set screws that can be installed or taken out. The screws bottom out so that you can’t screw them into the bullets path. With these screws, one cane tune the brake for particular ammo or if they primarily shoot right or left handed. It does take some patience to get it dialed in, but the results are worth it. Say your recoil impulse moves the gun up and right. Just remove one of the 45° screws, on the side of the movement, and shoot it again. If it moves a bit left, start by removing one of the left side 90° screws. Hopefully you get the picture.

 As I mentioned earlier, The Grater does a wonderful job mitigating recoil. Even before “tuning” it to my ammo, I could tell a difference over the previous brake that I had on the rifle. I set up some targets at around 25yds to do some double taps on. At first the rifle moved a little bit up and right. After a little time spent messing with the screws, I think I pulled out a 45° and a 90° screw, it now shoots super flat. Double taps can be done as fast as I can pull the trigger and the sight picture barely moves. As with all true muzzle brakes, it does have the flaw of being extremely loud.

 I think Trojan Firearms did an overall good job when making the Grater GenII. It does what a muzzle brake should, and has the added benefit of being “tuneable.” Yes it is not some fancy titanium, or have some space age looks, but it also won’t break the bank at $79.99. Go take a look at Trojan Firearms, they make an effective brake, if not other stuff one might like.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Tuneable muzzle brake

Target Market:

3 Gunners, shooters, or anyone wanting to reduce recoil

FNBs (Features & Benefits of this product):

  • 1/2-28 thread.

  • BLACKNITRIDE™ protective finish.

  • 4140 Carbon Steel.

  • Ten position 6-32 tapped gas ports for fine tuning.

  • Three Baffle chambered system engineered for optimal recoil reduction and muzzle control.

  • 3/4 wrench required for muzzle brake, 11/16 wrench for jam nut.

  • included jam nut 6061-T6 aluminum with black hard coat anodize

  • 0.860” outside diameter

  • 2.75” length.

  • Made in USA

What other aesthetic options or finishes are available?

None

What others are saying?:

Nothing found

Link to other reviews:

Nothing found

Price point:

MSRP = $79.99

I need it now! Availability:

Trojan Firearms

Our Rating:

Pros:

  • Tuneable

  • Effectively reduces recoil

  • Jam nut

  • USA made

Cons:

  • Loud

  • Takes some time to tune

Score: 8.00 Great

80.jpg

 

Favorite Link:   Freedom Flag Products





 

SEARCH