Scalarworks LDM Micro

In continuing the effort to keep my AR-15 cleaner, meaner and leaner, I've picked up a new mount for my red dot optic. I primarily run the Vortex Sparc II, paired with the occasional 3x magnifier. Vortex pairs the Sparc II with their own mount, which comes with a flat mount, a riser mount, and a spacer convert an absolute co-witness to a lower 1/3 co-witness.

I had grown discontent with the riser mount that comes with the Sparc II from Vortex as it is a solid chunky piece that weighs 2.435oz (3.095oz with the lower 1/3 riser) and uses a single hex screw as the cross bolt for picatinny or weaver rails. After a few years of swapping and remounting I've found the risers torx screw head to start stripping and retightening is more difficult. Instead of calling Vortex for a free replacement I decided to try something lighter with a better tightening mechanism overall.

The Scalarworks Low Drag Mount is a great alternative mount for the price point. Some may scoff at buying a mount thats only $50 than the Sparc II w/ mount included, but I felt the benefits would be worth while in the long run. The thumb knob was the selling factor for me, as I've never encountered anything that finger tightened so effortlessly with a rock solid clamping mechanism.

As indecisive as I am, I like to swap optics on pretty much every picatinny rail I own. Swapping between rifles, shotguns, and even pistols, the original Vortex Sparc II riser was bulky and required a tool for removal. It did provide elevation options to the user, but based on its omission from the latest gen optic the Sparc AR, its safe to say its not the slickest solution for AR-15s and Vortex has moved forward in their design department. The fact I can now move my optic forward or back on the rail, or swapping on a different firearm entirely greatly pleases me.

I sometimes choose to run a 3x magnifier behind the Sparc II, and ease of remounting to accomodate the magnifier when flipped to the side is a huge plus. If I opt to remove the magnification and position in the sweet spot just forward of the rear backup iron sight, the adjustment is quick and tool-less. Above all, the clamp the LDM uses is very strong and so far has produced repeatable zeros for my rifles, tho specific group sizes have yet to be scientifically recorded on my end.

I prefer absolute co-witness so I can align the circles of my rear aperature, optic tube and crescented front sight hood, but sadly I will have to make do with this until I upgrade my optic to an Aimpoint.

All in all, the Scalarworks LDM is a no brainer for someone looking to upgrade their factory optic and achieve a lighter firearm. The only real negative I can point out is the co-witness height is a bit screwy when using the Sparc II. Despite having the LDM100 absolute model, my iron sights sit at the lower third position on at 15" rail. This confused me at first, causing me to return the LDM to Rainier Arms and try the lower third LDM110 model which was way too high. EDIT: Scalarworks let me know that moving forward, the LDM/Micro Absolute Model will be lowered a tad to properly cowitness with the Aimpoint T2 (and Sparc II). I'm still happy with the LDM and will continue to use it in conjunction with irons, eventhough I wish it was a perfect absolute co-witness.

FIREARMS INSIDER REVIEWS – 8 KEY POINTS

Claim to Fame: The Low Drag Mount’s precision guided telescoping clamp holds zero on every re-installation, and under the heaviest recoil. Guaranteed.

Target Market:  Aimpoint/Vortex Sparc owners

FNBs (Features & Benefits of this product):

  • Repeatable zero with each installation via precision telescoping clamp & thumb knob
  • Lightest Quick-Detach Aimpoint Micro mount in existence
  • CNC Machined from ultra high strength 7075-T6 Aluminum
  • Intuitive attachment system that won’t back out under sharp recoil
  • Adaptable to out of spec rails without additional adjustments
  • Streamlined profile free of protruding levers or knobs.
  • MATERIALS: 7075-T6 Aluminum Alloy / 4140H Steel Alloy
  • FINISHES: Mil-A-8625 Type III Hard Coat Anodizing / Black Nitride™
  • WEIGHT: 1.29oz LDM100 / 1.33oz LDM110
  • WARRANTY: Lifetime
  • HEIGHT OVER RAIL (OPTIC CENTER): 36mm (1.42″) LDM100 / 40mm (1.57″) LDM110
  •  COMPATIBLE OPTICS: Aimpoint Micro T-1, Aimpoint Micro T-2, Aimpoint Micro H-1, Aimpoint Micro H-2, Primary Arms Micro Dot, Vortex Sparc II

What other aesthetic options or finishes are available?: Absolute or Lower Third co-witness*

What others are saying?:

"The fit and finish on the LDM/Micro mount was also very nice. No sharp points or inconsistent anodizing at all. Just a very clean, high quality look. Another thing I noticed was that the anodizing seemed to match up color wise to my Aimpoint T-1 which at a quick glance makes it look like a one-piece Optic/Mount setup. The design itself I think is very attractive. So my initial impressions are very good. I am looking forward to using the LDM/Micro mount full time on my SBR this year. Pricing on the SCALARWORKS LDM/Micro mount is a bit higher than some of the other mounts on the market but I think the quality and lightweight/low drag aspect of it makes up for that very fast. One thing to note is that the LDM/Micro mount does not come with screws and requires that you use your “factory” screws. If you are like me and bought a T-1 with something other than the factory low mount you will probably need different screws. My T-1 came with the Factory LRP QD mount which has really long screws. Thankfully I had some screws from a different mount that I was able to use. This is not a problem, just something to keep in mind, when purchasing you might want to contact Aimpoint to purchase a new set of screws." www.AR15news.com

"I should point out that Scalarworks didn’t skimp on the clamping surface. The rail clamp runs the entire length of the side of the mount. Once the thumb wheel is turned to hand tight, the mount isn’t moving. I have the LDM110 which is the lower third co-witness model. I use it on a carbine that I purposely built to be extremely lightweight. At 1.37 ounces, it weighs less than half of the mount that it replaced on this build! To save that much weight on such a small part is amazing. The LDM seems to be extremely well made. The machine work is clean and the finish is even. The fit and finish on my example is excellent.  The LDM is the lightest Aimpoint Micro QD mount on the market by a wide margin. Heck, it is lighter than most non-QD mounts. It is well made, it mounts easily, it returns to zero at least as well as is required for the precision level of the optic it mounts, and it looks pretty darn good too. This is an impressive mount and I can’t wait to see how they adapt this design to support other optics. " Jerking the Trigger Review

PRICE POINT:

I need it now! Availability: Rainier Arms or Brownells

OUR RATING:

Pros:

  • Lightweight
  • Thumb Knob is knurled for grip, and employs a detent to prevent backing out
  • Clamping rail is full length
  • Compatible with multiple red dots
  • Clamping action will accomodate out-of-spec rail widths

Cons:

  • Co-witnessing a Vortex Sparc II with iron sights isn't consistent with other mounts with co-witness claims: 1mm higher than other compatible optics on AR-15s, 3mm higher on a Tavor -EDIT: Moving forward this will not be an issue as the Aimpoint T2 wasn't out yet when they made the Absolute LDM Micro. The new mounts will sit lower and achieve the proper absolute co-witness.
  • Included screws are button head and do not bite firmly with my used Sparc II, the original screws from Vortex are tapered head and are much more secure (may just be the internal threads on my optic are worn and the Scalarworks screws are a tad short with the head type.

SCORE: 8.5 GREAT

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast
Hunter of Design

Hexmag Advanced Tactical Grip

  The Hexmag grip comes from the same company that brought us Hexmags. All of the Hexmag products I have seen come with a hexagonal pattern in them, thus the name. The pattern also adds a degree of flare to the looks of their products. 

  With the Advanced Tactical grip, you get this hexagonal pattern on the sides of the grip. And some raised straight lines on the front and back. But the big advantage to the Hexmag grip is its adjustability. One can choose 3 different positions or angles in which the grip sits. These are 17, 25, and 33 degrees. The setting are set up to help with different uses. The 17 degree is stated to help with AR pistols or close duty work. While the 25 degree is your standard AR grip angle. Leaving the 33 degree for a more relaxed shooting position, giving it more of a standard rifle stock feel. I found that the 25 degree position worked best for me. I guess that is why it was designed that way. 

  Now onto installation and adjustment.  The installation is very much like any AR pistol grip. Except that the Advanced Tactical grip has 2 parts. The first part holds the safety selector detent spring. It slides on as normal. Now you are left with the grip and the mounting screw. Both the grip and the mounting piece have large gear style teeth on them. Just put the screw through the handle and start tightening it as normal. Before it gets tight, position it on one of the 3 angles.  There are 3 locator lines on the back of the grip by the beavertail. These select which angle, just line them up and tighten the screw.  

  After using the grip for a while, I found it to be extremely smooth. Meaning that it was hard to get a good grip, and this was with dry hands. Hexmag sells grip tape that is cut to fit into the hexes, I would highly recommend this. I took it one step farther and stippled inside some of the hexes and also the front and rear of the grip. Besides being slick, having the option of adjustability is pretty nice. After I installed the grip, I was curious how the mounting system would hold up. Well it held up to me beating on a 2x4 with it. It didn't slip to one of the other positions, which I thought could happen. 

  If you are in the market for a new grip to enhance your AR rifle, look into the Advanced Tactical grip by Hexmag. But if you do decide to get one, get their grip tape or have it stippled. I liked the adjustability,  and now that it has been stippled, it is a nice grip

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Adjustable AR grip with cool hex pattern 

Target Market:

AR users looking for an aftermarket grip

FNBs (Features & Benefits of this product):

  • Hex pattern
  • Adjustable angles
  • Beavertail
  • Sturdy  

What other aesthetic options or finishes are available?

Black or FDE

What others are saying?:

Nice Grip 

Monte at Wise Tactical 5/5 stars

This Pistol Grip fit on my AR with no problem. It has a great feel to it and I really like that you can adjust the angle of it. It looks awesome on the Rifle, especially with the Hexmags.

Link to other reviews:

The Firearm Blog

Shooting Illustrated 

Price point:

MSRP = $27.99

Retail = $23.99 on Amazon

I need it now! Availability:

Amazon or check your local retailer

Our Rating:

Pros: 

  • Adjustable grip angle
  • Sturdy mounting system
  • Beavertail
  • Price

Cons:

  • Poor grip (slick)  
  • Has no storage inside grip

Score: 7.0 Good

 

Chad's favorite link: Saddle Butte Machine Gun shoot May 21 & 22, 2016

Fortis Rev II Handguard

Lighter handguards are becoming the new trend in AR-15 building.

Lighter handguards are becoming the new trend in AR-15 building.

AR15 handguards are about as ubiquitous as the rifle itself. Seems like more and more companies are springing up with a handguard for the dubious black rifle, and the tread seems to be lighter and more modular. With the proliferation of Keymod and MLOK rail attachment systems and less demand for full quad rail picatinny forends, the options for the end user have never been more plentiful.

The REV II's evolution brings more MLOK (or KeyMod) real estate while keeping the ounces down to a minimum.

The REV II's evolution brings more MLOK (or KeyMod) real estate while keeping the ounces down to a minimum.

I myself was interested in giving a lighter version a try, and I happened upon the Fortis REV handguards. Fortis machines some fantastic parts, and their handguards are now available in a Gen 2.0. The difference between the REV I and the REV II is the short forward rail sections in the 3, 6 & 9 o’clock positions that are present on the REV I have been removed on the REV II... and instead have been replaced with additional KeyMod/MLOK real estate and limited rotation QD sling swivel sockets.

The REV II uses the standard AR-15 barrel nut.

The REV II uses the standard AR-15 barrel nut.

The mounting collar uses four screws. 

The mounting collar uses four screws. 

I went with the 14" MLOK version of the REV II, and it is quite light. With a weight of only 9.3 ounces, Fortis really shed the excess with all of the milling and machining any of the 6061-T6 aluminum that wasn't crucial to structural integrity. The REV II uses a two part design where the main body is one solid piece, with a smaller mounting collar at the bottom rear. The REV II indexes by the two ear tabs that align on either side of the upper receiver, and a dovetail slot in the bottom that mates with the mounting collar and fastens with four screws and a 9/64 allen key.

The REV II still has the rear QD sockets for 2 point sling usage

The REV II still has the rear QD sockets for 2 point sling usage

Another design choice made to cut the fat was making the insider diameter much smaller than most other handguards on the market. At 1.340" the inside can still facilitate most low-profile gas blocks and the narrowest of suppressors like the AAC ECO-9/EVO-9 and most 22 cal cans. Be warned though, the screws/locking nuts of MLOK accessories will decrease that diameter by protruding inwards... making adding MLOK components and overlapping a can very problematic.

The narrow inside diameter of 1.34" will rule out some suppressors if you're planning on overlap, luckily the ECO/EVO 9 by AAC is 1.25" wide.

The narrow inside diameter of 1.34" will rule out some suppressors if you're planning on overlap, luckily the ECO/EVO 9 by AAC is 1.25" wide.


Overall with it's continuous top rail, anti-rotation index tabs, QD swivel sockets and use of the inexpensive and standard barrel nut, the Fortis REV II is a very nice handguard for the modern AR-15 build. The lighter weight will help keep your rifle lean and mean without sacrificing modularity

FIREARMS INSIDER REVIEWS – 8 KEY POINTS

Claim to Fame: Fortis REV™ II is an extremely lightweight yet robust free floating rail system.  When designing the REV™, we didn’t want just another rail system, we wanted a better, lighter, feature rich handguard that was robust and within budget.

Target Market:  AR15 owners

FNBs (Features & Benefits of this product):

  • Material: Aircraft Grade 6061-T6 Aluminum
  • Finish: Military Specification Type III Hard Coat Anodized
  • Length: 7", 9", 12", & 14"
  • Weight (length and rail system dependant) 12" Keymod = 7.8 Ounces
  • Inside Diameter: 1.340"
  • Continuous Top Rail
  • Rotation Limited QD Sockets
  • KEYMOD at the 3, 6, & 9 o’clock
  • Anti-Rotation Tabs
  • Uses Standard AR15 Barrel Nut (Not Included)
  • Made in the USA

What other aesthetic options or finishes are available?:  Keymod or MLOK. Some dealers offer FDE Cerakote.

What others are saying?: "I purchased a 12″ Fortis REV Free Float Rail for use on my lightweight project build and it has served me well. I needed an extremely lightweight, extended rail that mounted on the standard barrel nut for a 14.5″ barrel with permanently attached muzzle device and the REV fit hte bill perfectly. Fortis has now released the REV II that is basically the same rail except the short the 3, 6 & 9 o’clock forward rails that are present on the REV have been removed on the REV II. They have been replaced with additional KeyMod real estate and QD sling swivel sockets. The result is a rail that weighs even less at just 7.8 ounces (the REV 12 weighs in at 9.2 ounces).

This looks like an excellent revision to the REV series of rails. I really don’t use the forward rails and actually find them to be a bit uncomfortable for how I hold the carbine due to some sharp edges. The new version removes the rails, saves weight, and costs less (at the introductory price). That is a win-win-win." Jerking the Trigger Review

"I thought the cardboard tube the rail came in may have been empty b/c it was so light.  I opened up the tube...it was in there.  The rail just looks amazing imo.  I had actually called Fortis to ask about the total overall length.  I have a 12.5 barrel+was wondering how much of the barrel would be left with no rail covering it .  I had read the OAL was a bit more than 9"(it's about 9.2").  The amount of barrel left exposed on my 12.5" BCM barrel(not counting the threads on the end of the barrel) is 2.75".  I think it was the head of Fortis that answered the phone(not sure if it was).  Anyhow, I was really impressed with Fortis's customer service b/c he answered all my questions.  The rail went on SUPER EASY!!!  Being that it was my 1st upper build, that made my day.  I can't say enough good things about the rail.  I'm a very happy customer.  Also, as far as Red Barn goes, it was fast shipping, a great price, and great packaging-Couldn't ask for more!" Red Barn Armory Review

PRICE POINT:

I need it now! Availability: Rainier Arms or Red Barn Armory

OUR RATING:

Pros:

  • Lightweight
  • Easy installation around standard barrel nut
  • Continuous top rail w/ no gap

Cons:

  • Indexing tabs still not close enough to upper receive to ensure zero/level. 
  • No 7 or 9 inch MLOK versions

SCORE: 8.0 GREAT

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast
Hunter of Design

0 Likes

 

$170.95

GunVault SpeedVault SV500

Keeping a handgun in the home can be quite the catch 22, especially if you don't live alone. You want the gun easily accessible for the unexpected "bump in the night" scenarios, but leaving it carelessly in a nightstand or sock drawer can be pretty reckless. Especially if you have curious pups or nosey house guests that could find your weapon and potentially have a negligent experience. Keeping the firearm in a traditional handgun safe "keeps people honest" as so many like to put it, but often restricts the access due to size and weight of the safe, where you keep it, and how easy it is to open when the lights are out and wasted time could endanger your life.

I myself have lived in a few apartments over the years, and frequently have friends over to visit, often with children. I've grown accustomed to have some form of defense tool within arms reach of my bed, because frankly, bad things happen. Often it would be a compact sized pistol in a handgun-rated personal safe, which is more like a lockbox. The issue with this lockbox is it takes up alot of surface space, and is obvious as hell. Unless you bolt that thing down, consider it a fun puzzle begging to be solved by anyone who isn't you. Okay so what, you just slide it under the bed, lash it to the bed frame, or just bury it in your nightstand... well good luck getting to your protection now in the middle of the night, from a dead sleep in your pitch dark room, possible with your adrenaline pumping hard enough to hear your own nerve endings pop.

The facts are homes get burglarized/broken into by criminals, and criminals tend to work late shifts. AKA sleepy time for you. So when your alarm system's siren yanks your conscious mind out of la-la land, or the sound of your window shattering just after your head hits that pillow... thats when the timer starts counting down. This could be the difference between you being another victim of a B&E, or possible assault/homicide (check the news, pull your head out of the sand, it happens). You are particularly vulnerable at night, because your cognitive and motor functions suck when you are tired or after you have just woke up. I don't care who you are. In the scenario described above, fast and foolproof is how you want accessing your defensive firearm to be, but still be secure from unauthorized hands during the rest of the day. So you want fast security. Like a quick safe, or a rapid lockbox... or a SpeedVault!

There are plenty of personal safe manufacturers in the market, but few have the recognizability and popularity of GunVault. They are most notably known for their 'No Eyes' keypads and their biometric safes these days- which would seem like straight out of a spy movie just ten years ago. The SpeedVault is no exception with both biometric and traditional keypad configurations, but it's design is what makes it one of the most unique handgun safes available today.

While most personal safes contain handguns in a horizontal format with the pistol on its side, the SpeedVault supports the firearm vertically just like a holster on the belt. This unconventional vertical format, coupled with an adaptive mounting bracket, is perfect for two main reasons: you can mount it in low profile but easy to access locations, and when unlocked the gun's grip is exposed for a fast and unhindered grip. Just about the only thing it doesn't do is call 911 for you... but when seconds count and law enforcement is minutes away, you've at least got a gun in your hands!

The mounting bracket is ambidextrous, meaning you can mount it to either the left or right side of an object.

The mounting bracket is ambidextrous, meaning you can mount it to either the left or right side of an object.

First you line up the tabs with the safe's slots

First you line up the tabs with the safe's slots

Next thread the three thumbscrews into the bracket. The holes should be properly indexed when the hooks are in the mounting slots.

Next thread the three thumbscrews into the bracket. The holes should be properly indexed when the hooks are in the mounting slots.

Right out of the box, you could probably have the SV500 mounted, programed and fully operational in 20 minutes or less. That is, unless you have to run to the gas station because you don't have a spare 9 volt battery handy, and you glanced over the line on the package that said battery not included. While the included wood screws are kinda short, they allow you to mount the bracket right to the inside of a desk, headboard, nightstand, cupboard etc. without unnecessarily over-penetrating your furniture, or pinning your drawers shut accidentally. If you wish to mount into drywall or cinderblocks, I would suggest a trip to the hardware store because these screws are only good for wood.

The safe itself screws into the mounting bracket internally, which means I had to bust out the manual and read the instructions. You have to unlock the safe using either the key or the factory-programed code, remove the hinged door itself so you have enough room to insert screws from the inside and hand tighten against the mounting bracket. This may be a difficult task for large-mitted individuals so pliers may be needed. When the three screws are fastened, the safe itself conceals the screws holding the bracket to your surface of choice.

After a bathroom break and a victory beverage, the safe is ready for locking up your pistol, or reprogrammed to a code of your liking. Obviously with the biometric model SVB-500 you would scan in your fingerprints, as well as your spouse or any other authorized users. I chose the get the keypad version SV-500 because a.) it was cheaper and b.) I felt a manually entered sequence was less prone to fault than a biometric reader. OR rather, if a code didn't work, I would be to blame, not the SpeedVault. Entering my personal code is something I could train for and develop muscle memory.  Also if my fingers are ever injured or covered in blood, dirt, oil, Cheeto dust, etc. the keypad would still function.

The SpeedVault has a floorplate that secures the door to its hinge. You have to partially install the door inside the safe so the hooks go over the hinge bar, then you screw in the bottom plate to complete the installation.

The SpeedVault has a floorplate that secures the door to its hinge. You have to partially install the door inside the safe so the hooks go over the hinge bar, then you screw in the bottom plate to complete the installation.

What's really interesting is you have the option to program simultaneous button presses into your code sequence. So instead of 1,2,3,4,5,6 you could program 1,2-2,3,4-4-4,5,6 or any combination in between. Even though there are only four buttons, you are allowed a code between 3-6 keystrokes long. I like the idea of throwing a double press in the sequence because its not something a prying individual would typically try, and it increases the difficulty of it being figured out. Just be forewarned, the two/three combo finger presses have to be simultaneous, and the window for error is small.

If you miss or are slow with the other finger slightly, the entry will be incorrect.

Now keep in mind the safe will enter a "sleep mode" and lockout the keypad for 2 minutes if the correct code isn't entered within 24 key presses, and any additional attempts during that 2 minute period will makes the safe beep three times and the LED flash a red light. 2 minute "timeouts" between mischievous attempts should be long enough for a child to lose interest, and the tamper indicator feature allows you to see if someone attempted to open the safe since the last successful code was entered.

The SV-500 fits the entire full-size 1911 with no issue, and I can get my fingers around the frame to pull out.

One of the most popular complaints with digital keypads on a safe is the audible beep with each button press, and/or when successfully opened. The SpeedVault will beep like this from the factory, but it is very easy to disable the tones using the internal switch. Honestly it was the first thing I did when I got the SV-500 open, if I wanted it hear a beep every time I pushed a button I would just play with the microwave. An inward-facing internal bulb illuminates the gun when the safe is opened day or night, which I find useful and not intense enough to ruin my dilated pupils and kill my night vision. Its just enough to see where you are reaching if need be.

The inside is very simple, batter compartment, and two buttons: Learn (program) and Mute (no more beeps)

The inside is very simple, batter compartment, and two buttons: Learn (program) and Mute (no more beeps)

The biggest complaint about the SV-500 is the sound of the electronically powered mechanism inside winding up, followed by the "thunk" sound of the door becoming freed from the lock. Yes the hinged door does make another sound when gravity drops it to its fully opened position and contacts the stop, but this is not where the most audible of the sounds originate. Even when guiding the door open with your hand, the unlocking mechanism is the unwelcome noise. While I wouldn't call it entirely audible from the hallway outside the bedroom door (I've tested it) it is audible enough within the room. So if you plan to stash a candy bar in it for late night snack time, your partner will probably hear it and have some choice words.

Note: If you are a wheel-gunner through and through, barrels longer than 4 inches will bottom out and not fully support the firearm in the foam pocket. This causes the gun to droop and the grip to protrude from the door.

Internally, the 'holster' part of the safe is comprised of a foam pocket. This rectangular pocket is meant to hold your gun's slide, exposing the frame and grip for easy extraction. The depth of this pocket can facilitate a full-size 5" 1911, but anything larger I would have my doubts (a Desert Eagle would probably be incompatible). Obviously something in the compact range is ideal too, with room for an extra magazine if its small enough. The pocket isn't cut that large, but it is only foam so it nicely stretches and conforms around the slide and the light correctly.

I was surprised to find my S&W M&P357c fit even with a Streamlight TLR-3 light

All in all, the SpeedVault is fantastic. Not only can you mount it beside your bed or even under your desk at the office (where allowed) but the speed at which you can withdraw your handgun is exceptional. The only negatives I can think of are the noisy unlocking mechanism and the finicky double or triple code presses. I've also tried a larger gun and light combo for fit, the Glock 17 with Streamlight TLR-1 checks out. I keep my gun in condition 1 inside the SV-500, meaning a round chambered, full magazine in place and hammer cocked (or in my case, striker). Whether or not you leave the safety engaged is your preference, I'm used to carrying without a safety so my M&P is ready to go as soon as its in my hand.

FIREARMS INSIDER REVIEWS – 8 KEY POINTS

Claim to Fame: Keep your handgun safe, secure and ready for action with the SpeedVault. Offering a revolutionary design, the SpeedVault is equally as fast as it is discreet. It is the ideal choice for a home or business looking for added security

Target Market:  Those seeking basic gun security w/ quick access in the home or office

FNBs (Features & Benefits of this product):

  • Digital Keypad (biometric version also available)
  • Multiple mounting options
  • 18-gauge steel construction
  • Tamper resistant door
  • Backup override key included
  • Audio and LED low battery warning
  • Foam lined interior
  • Weight 6.61 lbs
  • Outer Dimensions 13"L x 3.5"W x 6.5"H

What other aesthetic options or finishes are available?: Black Only, but biometric access available in SVB-500 model.

What others are saying?: " 4/5 Stars - Works great, easy to install (I watched a video on YouTube) and I would recommend to anyone wanting immediate access to their weapon by their bedside, and also for safety reasons as children cannot gain access without the code or key. Also great to have the keys as backup in case our memory goes away (with age) and we forget the code. :-) Only concern is light does come on when it opens and there's a pretty audible "clunk" when the drawer drops." Sportsmans Warehouse User Review

" This is not a safe against determined intruders, nor is it a fire safe. It is a safe that will stop kids and honest adults from getting the gun while keeping it ready to use if needed. If you want a serious gun safe, then don't buy this and then complain that it is thin metal (but not flimsy by any measure). After installing it (with the short screws on solid wood) I can say that it would take a heck of a blow from a sledge hammer to knock it loose, or a determined assault from a crow bar, but again, it is not designed to stop a determined attack. Finally, if you are concerned about the people saying it is too loud, or the light is too bright, here's a reality check. As much as I like to imagine myself as Liam Neeson going rogue and blasting my daughter free from sex traffickers, this is not the case. This is not a product for black ops agents, it is a product for responsible gun owners with families. If we have to draw a gun against a person to defend ourselves in our homes, a light or a whirring is the least of our problems. It is a great product and the price is right." Amazon User Review

PRICE POINT:

I need it now! Availability: Brownells, Amazon or many sporting goods stores

OUR RATING:

Pros:

  • Very simple to program
  • Large buttons easy to use without vision
  • Keypad sequence can contain combinations of 2-3 buttons simultaneously pressed
  • Bright white internal light illuminates contents
  • Audible beep when buttons pressed is easily muted/turned off
  • Flexibility in mounting options (left or right side, desks, nightstands, etc.)
  • Easy programming + physical key backup
  • Steel construction feels extremely solid
  • Internal foam lined 'pocket' holds various gun models/sizes, even with light or laser accessories

Cons:

  • Very audible mechanical whining and "clunk" noise as the electronic latch locks/unlocks
  • Mounting bracket lacks screw hole options for wall stud
  • Included mounting screws are short
  • Double or triple press codes are finicky and can cause incorrect entries
  • Low battery warning only when keypad pressed

SCORE: 8.5 GREAT

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast
Hunter of Design

Axelson Tactical TALON muzzle brake

  The AxeTac TALON muzzle brake is made by Axelson Tactical out of Nevada. If you recognize the name it might be because the company was started by the brother of Matt "Axe" Axelson of Lone Survivor Fame.  They have brought out a number of products for AR-15 type rifles, along with their AXE series complete rifles.

  I have put quit a few rounds through the TALON brake they sent me. I also have shot a couple of the AXE rifles with them installed. The brake does an excellent job of reducing felt recoil, not that a 5.56 AR has much recoil. But what I was most impressed with was its ability to keep muzzle rise to almost nothing. It was easy to get accurate double taps, shooting off hand, at a 24" steel target at 200yds. This was with a 16" barrel and a red dot optic.

  The AxeTac TALON is sold as a muzzle brake, but it really is more. It is noticeably louder than a standard A2 flash hider, but not as loud as my 3 port comps that direct the blast out the sides. The TALON also does a great job as a flash hider, keeping the flash contained within it. And as a compensator it also does an excellent job. It will still allow some of the blast to go forward, but it doesn't seem to hurt its effectiveness as a comp. I ran the TALON on a 16" and an 11.5" AR. Yes, it worked better on the 16", but it worked quite well on the 11.5" also.

  Now onto the technical stuff. The TALON has 3 small slots, 1 facing up, and the other 2 facing the sides but slightly lower than 90 degrees. It also 2 large ports between the small slots. And 3 open ports at the end spaced evenly. The bottom is mainly closed except for the port at the end of the muzzle. Also on the bottom is the Axelson Tactical logo. The brake is 0.940" in diameter, and 2.5" long, not counting the crush washer (which is included). There are also flats to fit your standard muzzle device tools or a 3/4" wrench. It is made from stainless steel, heat treated, and then black Melonite coated. It is threaded the standard 1/2"-28.

  I would not hesitate to install one of these on another rifle. The finish is excellent. It does a good job at being a comp, brake, and flash hider. It's made in the USA. If you are looking for a good all around muzzle device, check into the Axelson Tactical TALON muzzle brake.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

AR-15 Muzzle Brake, Compensator, and Flash Hider all in one.

Target Market:

Shooters looking to mitigate recoil.

FNBs (Features & Benefits of this product):

  • Reduces felt recoil

  • Reduces muzzle rise

  • Reduces flash

  • Made from stainless steel

  • Melonite coated

What other aesthetic options or finishes are available?

None

Link to other reviews:

Google was not my friend and I could not locate any

Price point:

MSRP = $94.99

Retail = $94.99 on Amazon

I need it now! Availability:

Axleson Tactical or Amazon

Our Rating:

Pros:

  • Reduced recoil

  • Almost no muzzle rise

  • Melonite coated

  • Stainless Steel

  • Made in USA

  • Includes crush washer

Cons:

  • Price

  • Longer than a standard birdcage flash hider

85.jpg

Score: 8.5 Great

 

 


Chad's Favorite: Patriot Patch Co.

HCMAGS HC3R 10/22 magazine

   HCMAGS is a company that makes an easy loading magazine for the 10/22, or any other firearm that uses 10/22 magazines. I first saw one of their magazine systems at a local gun shop. The idea looked really cool, so I purchased one. The magazine holds 25rds of .22lr with a side saddle that holds another 20rds for quick loading. 

  The HC3R magazine can be used like any other mag, but why? Well, since the HC mag has a slider on the side of the magazine, you could just slide it down while loading it up. But there's more. The back of the magazine acts like a stripper clip. One can push it down slightly and rock the whole stripper clip out. Fill the clip up with 25rds, pull the slider on the side of the mag down and lock it in place. Then roll the clip back into the magazine and release the slider and your ready to go. When the clip is off of the magazine, you can also put 20rds in the magazine side saddle before loading up the other 25rds. Once you have depleted the contents, you can take the stripper off of the magazine, slide it over the rims of the 20rds in the side saddle, and reinstall it with 20 new rounds. An extra stripper clip is included also. 

  Now I would have thought that this was the best thing since sliced bread. The biggest problem is that I couldn't get the magazine to feed in 3 different 10/22's. HCMAGS instructions say to watch their video on their website to make sure you are loading the magazine correctly. I watched it 3 or 4 times and still the magazine wouldn't work. I called them and they told me that I had a 1st generation HC3R mag and when the 2nd gen was out they would replace mine with a gen 2. They replaced it after about 6 months. Okay, sometimes manufacturing takes longer,  so I was alright with that. Now I have my gen 2 in hand, and it works a little bit better. It only jams about every 3rd round, instead of every time. I can't load 25 in the mag or it won't even feed, I have to load 20 to get it to feed the first round. Different manufacturers of .22lr don't seem to make a difference either. As is with different 10/22's.

  Basically the HC3R magazine is an innovative design. It is kind of a shame that it doesn't live up to its hype. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quick reloading 10/22 magazine

Target Market:

Someone who wants extra magazine capacity without the need for an extra magazine. 

FNBs (Features & Benefits of this product):

  • Quick reloading 
  • Stripper clips
  • Lockable thumb stud
  • Extra ammo on hand in magazine side saddle
  • Disassembles for cleaning

 

What other aesthetic options or finishes are available?

Tactical pack available with extra stripper clips, loader, and case. 

Tactical pack

What others are saying?: 

 Bill K. at Botach 2/5 stars

Cumbersom

This magazine is difficult to load for me. I found bullets jamming during the loading process and falling out of the Rib Clip and extra holding channel when I didn't hold it properly. For me, it is more hassle than it's worth.

LEXRated at Cabelas 5/5 stars

Awesome and Innovative

There's not much real fun in loading, but this system these folks have developed is simply amazing.

Follow their instructions and get a couple extra magazines and this system will let you shoot all day and even for days. It is effortless.

NOTE: this listing is incorrectly listing the magazine as a 20 round magazine. Once they update the product to show it is in fact a 25 round magazine and it's part of the whole system whereby the strip clip feeders hold 20 rounds on the same mag. That means with one mag you have 45 rounds, 25 in and 20 out, and dumping the 20 in is super fast.

I hope Cabela's gets the HC Mags HC3R Tactical Kit (I have one already) but others need to know about it. I do not work for HC, just an impressed customer of their product and fan of Cabela's.

Additional note: some may say that having an open/exposed magazine makes it not worth it, but considering how much more one typically shoots with 22, i see the value in making the loading delays and effort go away and getting back to shooting more important. Plus, it's a breeze to clean and frankly, most of any significant debris easily going in, can fall out the same way. Mud is mud and play safe.

Price point:

MSRP = $29.95 at HCMAGS

Retail = $30.00 at Botach

I need it now! Availability:

HCMAGS.com

Our Rating: 

Pros:

  • Stripper clip
  • Steel feed lips
  • Ease of loading
  • Comes apart for cleaning  

Cons:

  • Will not feed properly
  • Shouldn't need special loading instructions

 Score: 4.00 Bad

 

 

 

Chads favorite link of the day: Northwest Firearms

VLTOR SM-O QD Offset Scout Mount

This VLTOR flashlight QD mount goes by SM-O: Scout Mount Offset

Here at the Firearms Insider, we've reviewed a lot of rifle accessories. I've seen my fair share of flashlight mounts, in polymers and pot metals alike. Like flashlights themselves, the options for mounting solutions that exist in the firearms market come in all shapes and sizes.... with lots of terrible, cheap and faulty options on the market. Lucky for you, I was in the market for a quality "cry once, buy once" light mount about a year ago, and have only positive results to report back. 

In picking up quite a few "modern sporting rifles" as well as pistols and a scattergun or two, I was in the market for a quality mount that had a quick detach function so my light could jump from weapon to weapon as I see fit. What I landed on was the VLTOR SM-O: Scout Mount Offset QD. The VLTOR SM-O comes in a QD cam lever version, which is made by American Defense. If you are looking for rock QD solid mount that will hold up on all weapon platforms - from rifles and carbines to even the jarring recoil of the shotgun, ADM makes some fantastic mounts. In my experience with buying cheap mounts and then later replacing them with better quality versions, almost everything made by American Defense straight up rocks! Seeing this mount was a combined effort between VLTOR and ADM was almost reason enough to give it a shot.

The SM-O is unique in that it's clamping mechanism simultaneously grips the picatinny rail AND tightens the one piece ring around the light. When adjusted correctly to your light's body diameter, it secures the light when the cam locks down, but easily releases the light when the cam is unlocked, allowing for easy adjustment for your ergonomics.

The headline act of VLTOR SM-O is its QD mount. Easy to remove, easy to reverse for your rifle.

Adjusting the SM-O for your specific light does require some light tinkering. This is the only time a tool is ever really needed. Basically you need to adjust a bolthead when the light is removed, then try inserting the flashlight into the ring body, and throw the QD lever to check for difficulty and resistance. Too hard to throw completely 180 degrees and you'll need to unlock the cam and remove the flashlight to loosen the fit. Too loose and your light can spin in the ring body and the cam won't snug that rail like it should. Its a bit of a back and forth dance to find the proper balance of secure fit, but once you find it, its clear sailing.

I've been primarily mounting a pair of SureFire G2X Pro lights on just about every railed part I own over the last year, from AR-15 handguards, AK-47 forends, Tavor MLOK rails, shotgun barrel clamps, and even tactical scope rings. The SM-O worked on everything, and the tension never loosened from my initial configuration no matter how many times I played musical picatinny rail with this thing. Removal and replacement can be done in seconds, and with just one single hand. If the offset is putting the light too high or low for your liking, just invert it and reverse the flashlight. No one will call you out on the VLTOR logo being upside down.

Got tactical scope rings? The SM-O makes for a great optic mounted light for nighttime shooting without interfering with scope turrets. 

Even if you don't have a tactical plinker decked out in all the bells and whistles, this simple mount is quite handy for the varmint hunter as well. Mounted on a railed scope ring cap or tactical accessory scope ring, this mount provides a perfect offset light that will hold up to whatever you can throw at it. And if you find yourself needing and handheld light for not shooting purposes, you've got one in seconds.

All in all, this product leaves me conflicted. I wish I could afford more of these for each one of my modern sporting rifles. Then again, I don't need to because of how easy it can jump from gun to gun. So until this one blows up or grows legs and runs away, the SM-O will always have a home in my arsenal.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The Offset Scout Mount is manufactured in conjunction with American Defense Manufacturing, and is a fully ambidextrous, offset light mount available with either conventional thumb screw mounting or throw-lever quick disconnect.

Target Market:  Civilians and Professionals with railed rifles or carbines

FNBs (Features & Benefits of this product):

  • Either thumb screws or throw lever mounting
  • Made from 6061 T6 aluminum
  • Hard coat anodized
  • Adjustable tension
  • Minimal / Low Profile 

What other aesthetic options or finishes are available?: Black Only

What others are saying?: "I've tried a lot of light mounts over the years. This is by far the best. The unique mechanism of the American Defense cam lever is easier on rails that the LaRue mount, making this mount better in my opinion, and less expensive. The cam makes for a secure mount that will not loosen like thumb screws, and because of the large bearing surface does not require much pressure to hold it securely in place. I also like that the caming action also holds the light in place. This enables the light to be quickly and easily removed from the mount, turned around or reconfigured. This enables it to work with every rifle I've tried it on. I've now got a box full of used light mounts for sale." Brownells User Review

"I love this QD flashlight mount. I've bought several flashlight mounts for my rifles and shotguns. I have had the cheaper plastic mounts that just can't hold the flashlight securely with the recoil of a shotgun. This mount is also much easier to use than others due to the QD feature. The off-set angle mounts the flashlight at an angle I prefer, keeping it out of the way of a DBAL or other accessories you may also want to mount. I plan on replacing several of the mounts with this model.

." Amazon User Review

PRICE POINT:

I need it now! Availability: Brownells, Amazon or many online stores

OUR RATING:

Pros:

  • Very durable finish
  • Mount can be removed easily for attaching to another position or weapon
  • Light itself easily removable when cam in unlocked for maintenance or reconfiguration
  • Minimal footprint on the rail

Cons:

  • Minimal instruction for adjusting tension

SCORE: 8.5 GREAT

 


Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast
Hunter of Design


SureFire G2X Pro LED Flashlight

The new tactical duo that've been illuminating my life, the SureFire G2X LED Dual Output.

As flashlight technology improves, we start to see entry level lights become more and more advanced with features that used to be reserved for higher end models. Features like LED and dual outputs are great to have for other purposes than high speed low drag operator types. Combine those with a durable body and a pocketable size, and you've got yourself a quality light for everyday carry, that won't kill your wallet.

The G2X Pro runs on two 123A batteries

Enter the SureFire G2X Pro. Its simple light, built to survive harsh use and give the user dual output in a simple tail cap button. Nothing to twist to turn, just an easy to use button that can switch between a low, long runtime settings and a very bright shorter runtime option. The first press of the button delivers 15 lumens at its low setting. With a runtime of 4.5 hours, 15 lumens does seem like a hallway nightlight. Compared to any other light it seems underpowered, but the 15 lumens is great for smaller tasks at night without ruining your pupil's night vision from excessive light splash. Searching the backseat of your vehicle, or checking inside a dufflebag when the power goes out, or not blinding your significant other inside the tent on your camping trip.

The higher output mode of 320 lumens is vastly brighter with a farther reach. Originally Surefire had the higher end capped at 200 lumens, but they have since added another 120 lumens so make a staggeringly blinding light from the LED emitter. This setting is great for outdoor and indoors, especially in a searching or defensive role. This level of lumens is enough to temporarily blind an assailant, so it works great as part of your EDC gear with your defensive pistol or mounted onto your rifle/carbine/shotgun. It's 1 inch body and 1.25 inch bezel make is well suited for a long gun or carbine using any number of mounts. Even for the unarmed dog walker, the higher setting is useful for illuminating objects or hazards at a distance.

Shown on the left is the 15 lumen low setting, and the 320 lumen high setting on the right.

The tail cap button also has two levels of activation, a partial depth that serves as a momentary on position, and a full press that clicks and locks. Its a bit tricky at first to get the hang of the optional press depth as well as the dual output setting, but once you get the hang it, I find it advantageous. Sometimes you only need a brief moment of light, to find your keys on the ground or to clear areas of threats without indadvertedly broadcasting your position with too long of an activation. The partial depth also speeds the time it takes to "double tap" to the higher 320 lumen setting right off the bat. At that point you can either fully depress to lock it in at 320 lumens, or simple maintain the partial pressure until the light is no longer needed and you just release. As far as the flood itself, the reflector is micro-textured and delivers pretty wide beam with generous peripheral spread.

The G2X Pro pairs well with rail-compatible weapon mounts. The FDE matches the Viking Tactics FDE mount perfectly.

If you don't like the dual output function, which is fully understandable, the G2X Tactical model is available at 320 lumens full time all the time for the same price point. I can report that the G2X Pro's time to double click the button can be as slow as two mississippis between presses to still get that 320 lumens mode. Of course double pressing faster than that will still work that higher mode.

The business end of this light is very sturdy.

The biggest selling point to this compact flashlight is its sheer durability. The polymer body is constructed of Nitrolon® and is smoothly sculpted for a comfortable grip and resists scratches, abrasion, and corrosion... not to mention gives a good grip. The high-efficiency LED make the light virtually immune to failure to damage... and since there's no filament to burn out or break, the light will easily outlast more conventional bulbs.

Overall I really like this SureFire. Admittedly the under $100 price point is what got me to give it a try, but after testing two models as an EDC light and a dedicated rifle mounted light, I am am very pleased with the G2X. Its a very solid, minimal light that I will try hard not to lose (hence why I bought two).

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The G2X Pro is a compact yet powerful polymer-body flashlight that uses a high-efficiency LED to provide two light output levels: brilliant & penetrating.

Target Market:  Civilians and Professionals

FNBs (Features & Benefits of this product):

  • Virtually indestructible LED emitter regulated to maximize light output and runtime
  • High 320 lumen 2.5 hour runtime
  • Low 15 Lumen 4.5 hour runtime
  • Two output levels—high for maximum light, low for extended runtime
  • Precision micro-textured reflector creates smooth, optimized beam
  • Tough polycarbonate window resists impact
  • Tough Nitrolon® body, anodized aluminum bezel
  • 1" body, 1.25" bezel
  • Dual-output tailcap click switch—press for momentary-on low, click for constant-on low, return to off then press or click again for high
  • Weatherproof—O-ring and gasket sealed
  • Includes high-energy 123A batteries with 10-year shelf life

What other aesthetic options or finishes are available?: Black, Desert Tan, Forest Green, Yellow

What others are saying?: "I have older G2's prior to the recessed click tail cap. The ability to activate the light for momentary or constant without having to turn the rear cap is very handy. I also appreciate the 320 lumens over the older 200.  This is a very robust, bright light, with an excellent beam at a great price." User Review

"I've owned a number of the SureFire flash lights. Best darn flash light ever made. The problem I seem to have is every so often it grows legs and runs away. Even though I purchase lanyards they still seem to get away from me. All kidding aside, I love their products and am a firm believer you get what you pay for. I use them day in and day out. So much I wore out and requested a replacement switch fully expecting to pay for it. To my surprise and delight I received one in the mail in a couple of days at "NO CHARGE". Now thats what I call a great company that stands behind their product. Hands down, the best." User Review

 

Price point:

I need it now! Availability: Brownells, Amazon or many online stores

Our Rating:

Pros:

  • Very Durable construction for tossing around or pocket carry
  • Can toggle tailcap button or momentary press
  • Works well with weapon-light mounts

Cons:

  • No provisions for pocket clips or lanyards
  • No Tape switch ability

Score: 7.5 Good


Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast
​Hunter of Design


Hipertouch 24C Trigger

The Hiperfire Hipertouch 24C for the AR15 is a multi-adjustable competition trigger system. It is a single stage trigger with a flat face and/or a trigger shoe. Hiperfire has been manufacturing AR triggers for a while now. The 24C is one of their flagship models. This trigger has been designed for competitions like 3-gun. It also would work well for varmint rifles.

The Hipertouch comes with 3 different pairs of springs. These springs adjust trigger pull weight and hammer fall energy. They come in blue, yellow, and plain. Blue springs are for medium trigger weights and stock hammer energy. Yellow are for light/medium weights and standard hammer energy. And then there are the plain springs. These are for a light trigger pull and Increased hammer energy, they also give the fastest lock time. This spring system is unique. When manually cycling the hammer you can feel it toggle over center. It basically pulls against the trigger spring to help reduce pull weights but still remain safe. I assume this also helps with lock time. I tried the different springs and ended up going with the plain ones for the lightest pull weight.

Along with the different springs, the 24C comes with a "Hipershoe". The hipershoe is a trigger shoe that can be positioned in any of the 5 different locations on the flat trigger. It is slightly curved and much wider than the trigger itself. The 24C does not require the hipershoe, and if not used, it is just a flat faced trigger (no curve whatsoever). Adjusting the hipershoe is pretty easy. It just slides up and down on the trgger and locks in place with a kind of detent system. With the shoe in its lowest detent, one will get the lightest trigger pull and the expense of a tiny bit of creep. With the shoe in the top detent, one gets an ever so slightly heavier pull weight, but with no noticeable creep. The pull weights vary between around 2lbs to 4.5lbs depending on what springs are selected and what position the hipershoe is in.

Installation on the 24C is not as easy as some drop-in style triggers. But it is not extremely hard either. Hiperfire sends some good instructions to help ease the installation pain. If you are not confident doing it yourself, just take it to a gunsmith and have it installed, they probably won't charge too much. First, of course, you must take the old trigger out. Then you take the trigger/disconnecter and install it like you would for a standard AR trigger. You can then slide the hipershoe on it (if you want it on). After that, intall the hammer just like normal. Now it gets a little more complicated, as you have to install the toggle shafts, pivot, spindle, and springs (mentioned above). I won't go into that, as the instructions do a great job. An extra hand might be advisable. After all of that, safety check it and go have fun.

This trigger is fantastic! It is super smooth, crisp, with a light pull weight. I have used it for 3-gun and target shooting. It has performed flawlessly with all types of ammo, including steel cased and .22LR with a conversion kit. When target shooting, the crisp pull and fast lock time makes for a great experience. If you are in the market for an aftermarket AR trigger, go look and see what Hiperfire has to offer. I don't think you will be disappointed.

 

Firearms Insider Reviews – 8 Key Points:

Claim to Fame:

Precision single stage adjustable trigger for the AR-15 platform Target Market: 3-gun, competition, varmint hunting, target shooting, and anyone looking for a really good trigger for an AR

FNBs (Features & Benefits of this product):

  • Adjustable
  • Hipershoe (wide curved trigger shoe)
  • Increased hammer energy
  • Increased lock time
  • Flat face trigger
  • Single stage

What other aesthetic options or finishes are available?

Essentially the same trigger but with a curved bow and no Hipershoe: 

HiperTouch 24 3G

What others are saying?:

By JustinInATX: 5/5 stars on Amazon

Best trigger I own. Just installed this on a high-end AR 308 build and it runs like a champ! It slams down with authority, twice as powerful as any other trigger I own. I've encountered a few light strike with my CNC 3.5lb trigger, but that's not even a possibility with the HiperFire. Great Product! Only gripe, I don't like red, please offer the finger rest in different colors.

Dan: 5/5 stars at Brownells GREAT TRIGGER RIGHT OUT There are several unique things about this trigger. First it includes a trigger shoe with it. The second being the hammer has an extra spring with it that acts sort of like a piston giving the hammer some extra power. For starter, everything about this trigger is amazing. I never really bought enhanced single stage triggers and always used the standard single stage trigger. My other builds have a two stage trigger which I like but I had one build that I wanted to keep as a single stage. The hardest part about the standard mil-spec trigger for me is the reset after you fire. It makes the trigger feel jerky because you don't know when it's going to reset so your finger is bouncing all around. Doing a slow fire with a single stage is a bit hard too because the trigger has a little bit of roughness before the hammer falls. Overall the hiperfire 24c removes the jerky pull of a single stage and allows for a smoother reset. It also gives a consistent reset so you can keep your finger on the trigger all the way. This trigger comes with three sets of springs to put in the piston behind the trigger. Hiperfire calls it light, medium-light, and medium. It gives no description as far as what the pull weight is in lbs. The best I can tell from reading the instruction is that light = roughly 3.5lbs, medium-light = roughly 4.0 lbs, and medium = roughly 4.5lbs. I put in the medium blue springs in since I wanted the heaviest weight to pull. It fits me perfectly and doesn't feel unsafe for me. Also of interest is the trigger shoe that comes with this. It is adjustable and allows you to consistently put your finger in the same position each time. It also allows you to get extra leverage as far as pulling. Personally I don't know what to make of the trigger shoe or how long it'll last on the trigger before it breaks or comes off. However, without the trigger shoe, the trigger looks like any flat bow trigger out there. Overall very good trigger. I highly recommend looking into this if you're in the market for a single stage trigger.

Link to other reviews:

Four Guys Guns

We Like Shooting

Price point:

MSRP = $235.00 

Retail = $235.00 @ Brownells

$220.95 @ Amazon

I need it now! Availability: Amazon, Brownells

Our Rating:

Pros:

  • Adjustable
  • Crisp break
  • Good reset
  • Flat bow with Hipershoe
  • Fast lock time
  • More hammer energy
  • No over travel

Cons:

  • Slight creep when the Hipershoe is at the bottom of the trigger bow

Score: 9.0 Amazing

Yes, that is a 9. 0

 

Hipertouch EDT3 trigger

The Hipertouch EDT3 trigger from Hiperfire is their newest addition to the duty line of AR15 triggers.  The EDT3 stands for Enhanced Duty Trigger cubed, It is also their 3rd addition in the Duty Line of triggers.  Hiperfire manufactures triggers for AR15 and AR10 style rifles.  Many of their triggers are used in 3-gun competitions, but this line of triggers is more aimed at law enforcement, military or anyone wanting a better trigger with the same reliability as a stock trigger.

After receiving the EDT3, I promptly installed it in one of my AR's.  Installation was extremely simple.  Basically, if you can install a stock trigger, you can install this.  The EDT3 also came supplied with a tapered installation pin.  With the pin, once the trigger assembly is dropped in the lower, all you have to do is push the install pin through the hole and follow it up with one of the supplied trigger and hammer pins.  Once installed I noticed the trigger was far better than the stock one.  Hiperfire did mention that this trigger tends to need about 200 presses before it smooths out.  I did notice it smoothed out, but it was quit good to start with.

Now for the good stuff.  The EDT3 has 2 different stated pull weights, 4+ and 6+.  Now I say "stated" because the pull weights I got were different.  Also, because theEDT3 has a unique trigger shoe, pull weights vary depending on where the trigger is being pulled.  The EDT3 comes with 2 different color hammer springs, a Red and a Green, the green being the lighter one and the red being stronger.  When the red spring was installed I measured the pull weight at 6.75lbs in the middle of the trigger and 4.5lbs on the bottom portion of the trigger.  With the green spring installed the pull weights were 5.5lbs in the middle and 3.75lbs on the bottom portion.  So now I'll try to describe the shape of the trigger bow.  The bow appears to have a standard AR curve to it, and then at the bottom 1/3 to 1/4 of the trigger it changes to flat (Hiperfire calls this a "Duplex" trigger bow).  When using the trigger I found that it lends itself to being pulled from the bottom flat portion.  I don't know if this was intended in the design, or if it just works out that way, but since the better pull weight is toward the bottom of the trigger it works out well.  In a designated marksmanship rifle, the standard curved part could be used for normal fast shots with the lower portion used for precise shots.

The EDT3 trigger is a single-stage style.  It has no noticeable creep.  The total trigger pull length, when measured at the bottom of the trigger, was 0.060".  To compare, a stock AR trigger has about 0.125" of pull, so the EDT3 has half the total pull of a standard trigger.  I only noticed the pull distance when pulling the trigger very slow from the bottom part of the trigger.  And then it was extremely smooth.  When shooting from the curved part of the trigger, I did not even notice the movement.  The reset on the trigger is also very positive, which I like.  Due to the design of the trigger, it has more hammer fall energy than a stock trigger group.  I tried it with all different types of ammunition (including steel cased) and had zero problems.

After abusing this trigger for awhile now, it has done everything a trigger should do, and does it well.  If you are looking for a replacement trigger that maintains factory safety margins and won't break the bank, look into Hiperfire and their duty line of triggers.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Duty replacement trigger for AR rifles with a lighter, but not to light, trigger pull

Target Market: Law Enforcement, Military, Home Defense, and Hunting

FNBs (Features & Benefits of this product):

  • Drop in replacement
  • "Duplex" trigger bow
  • Different pull weights
  • Single stage
  • Positive reset
  • Shorter than stock pull

What others are saying?:

Ivan Crews from Hiperfire web site:

"Yo’ll are on top of things. Got the hipertouch edt3 this morning and put it through hell. I’m x-military and this is a far better trigger group than the standard milspec. Im rough on firearms and my way of looking at things is if it cain’t take abuse I don’t need it. This trigger group can take it. Very nice feel and action. In case someone out there is wondering, this trigger group will fit and work in the colt ar 9mm and the stag arms 9mm carbines but the safety has to be removed in order to install it in the stag arms 9mm then reinstalled."

Price point: 

MSRP = $99.00

Retail = $99.00 at SWFA.com

I need it now! Availability:Hiperfire or SWFA.com

Our Rating: 8.0 Great

Pros:

  • Lighter pull weight
  • Duplex trigger bow
  • Installation pin tool
  • Great reset
  • Shorter pull length
  • Price

Cons:

  • Pull weights (only 2 options)
  • Noticeable creep when using the bottom part of the trigger

Chad’s Favorite Link: Northwest Firearms

SCCY CPX-2 Handgun Review

You may have seen the SCCY handguns and wondered what kind of gun they are; a cheap “Saturday night special” sub-par firearm or is it a real bargain, a diamond in the rough. Well hopefully after reading this review you’ll be well informed about just what this pistol is and what it is not.

So let us get into a little about the pistol. The SCCY (pronounced sky)  CPX-1 and CPX-2 are all 9mm handguns. Anyone familiar with the Kel-tec and the Ruger LCP / LC9 series pistols will be familiar with this platform, as they are essentially a scaled up version of that platform. They straddle that line between a compact and a subcompact pistol. They have a stainless steel machined barrel and slide with a polymer lower frame and an aluminum and steel fire control system that has a DAO nine pound trigger, and come in many colors. Functionally, the pistols are all the same, the only difference being the CPX-1 has a manual frame mounted safety. All come with two double stack 10 round magazines one flush fit one with a finger extension. They also come with a box, a manual, and locking device. In my six months of extensive use, I have never had to use the warranty but it seems to be one of the best in the industry. The real world street price is around $250.00

I am very blessed to have many wonderful handguns; Glock, Smith and Wesson, and Wilson Combat, to name a few. All very nice reliable accurate competition and defence guns. If they were not, I would sell them and get something else.

So why would I ever use or carry a much less expensive handgun like a SCCY? Well that’s easy, because it works! I have tested them extensively for the past six months as a defensive gun and a teaching tool for firearms instruction.

With that said, let's get into testing and evaluation. I have certain standards that my  defensive handgun must meet before I am comfortable carrying it. Dependability is, obviously, very important. This is where this budget gun shines the brightest; A++. In my six months of extensive testing with several of these pistols I don’t think I have ever had a malfunction. That’s almost unheard of. I wish that I had kept a round count but trust me it's up there. I have fed this handgun all manner of factory rounds. From FMJ and several defensive hollow points including +P+ federal 9BPLE that is rated high above the plus P pressure levels. Now, handloads are what my guns eat most of the time. I have loaded it with my competition load that is just making power factor for USPSA out of a 5 inch barrel, so I know it should be well under factory ammo levels out of the SCCY’s much shorter barrel. None of this ammo choked the gun. I have loaded from 115gr FMJs to 148gr lead poly coated bullets I have loaded them both longer and shorter than specified C.O.L. with zero malfunctions. I have fired it two handed, right hand only, left hand only, wet, dirty; I even threw one in the snow and mud and fired it without a cleaning. I have dropped it on both asphalt and dirt. Still no issues. This may upset some people but I have had Sigs and Glocks that have had more malfunctions. To put it simply: I have tested this thing for reliability and it passed.

After the gun fires, the bullet needs to hit the target. So next I'll cover accuracy. There are two types of accuracy I would like to cover. First is mechanical accuracy: how accurate the gun is with no human influences. Next, and more important, the personal accuracy: how well the shooter and the gun function together. My personal test for accuracy of my carry guns is the minimum capability to make 25 yard head shots every. This weapon  can achieve sub 3 inch groups off hand at 25 yards. The point of impact varies depending on the ammo velocity, grain, etcetera, as with any Browning type lockup, tilt barrel design. This is where the pistol came the closest of not making the cut for me. With all  the SCCY’s that I have tested the Point of impact is high at 25 yards. With the load I found that has the closest point of aim / point of impact (Federal 115gr 9BPLE) it’s still inside a USPSA head area at 25 yards, so it’s not a big issue. But with some loads the point of impact can be quite high. This just reinforces the importance of personally testing the gun and ammo you use to defend your life with. Still, these guns are capable of good accuracy; a caveat being that they have a long heavy double action trigger and that’s a hard pill for some shooters to swallow. I think double action only can be a good choice for a defensive trigger but if you are not used to it, it may take some training to be accurate. If you are used to a double action revolver trigger, it will be like an old friend.

After you have hit your target, you may want or need to hit the target again quickly. Therefore a reasonable rate of fire is important. I believe this defensive firearm with trained handler can achieve a reasonable rate of fire. For this to happen the shooter must be able to control the recoil of the firearm they are using. If the shooter has to readjust their grip after every shot, that will greatly hinder the speed of follow up shots. Now, as I stated earlier, this gun has a long heavy double action trigger. If you are looking for 1911 split times this gun, it will be slower. Also, this is a smaller, lighter gun and it has comparable amount of recoil for a gun of its size. I found the recoil substantial. More than my average carry gun. I would say more than an M&P, Glock 19, or 1911 platforms but less than Ruger LC9, S&W J frame or S&W Bodyguard. Physics being what they are, the recoil is on par with a smaller lighter 9mm.

So with the major things out of the way I will cover some other aspects of the SCCY. First off size, this handgun it about the same size as a Glock 26/27 without being as blocky, although I love my Glock 26, it’s a great carry gun I do find it uncomfortable to pocket carry. This one with a flush fit magazine I find pocketable. As a trainer I find that a lot of new concealed carriers get handguns that are too small. There are times when a super small micro .380 is all you can get away with. However for the most part a medium sized handgun in a service caliber is a more effective choice. This gun is on the “smallish” size but not to small to be effective. I feel that this pistol is a good size for all around carry.

So what’s the quality like on this sub three Benjamin handgun?  The metal on this gun is machined well, the fit and finish is nicer than you would expect for the price. The springs seem to be of a good quality with a dual recoil spring. The barrel is good quality, one note is that machine marks can be seen in the lands of the rifling. I’m not sure that most people would even notice.

Now ergonomics are in the eye or hand of the beholder. That said here are some generalities. The profile of the gun it good overall. Most shooters should get a full grip on the gun. I think the finger groves will work for most people. The Polymer's grip texture is similar to other guns. I would like to see a more aggressive texture on a CCW gun, but I would say that for the majority of polymer guns out there. The controls will be familiar to users of other modern handguns. They are in the right place and the size and shape make for easy manipulation of the pistol.

As far as the sights, go they are the standard 3 dot sights that the shooting community has come to expect. The rear is metal dovetailed with an allen set screw, a nice feature. The front it a polymer press in like the old style Glock front sights.

The disassembly and assembly are super simple, which gets high marks from me. I would say that one reason that these guns are so reliable is their simple design. I mean, they make a Glock look complicated, and the insides of a 1911 look like a super computer.

Now before you think I’m completely smitten with this piece, there are some things that I would improve. First the trigger reach is quite long. I have medium hands (I wear a medium glove). The trigger reach is on the verge of not allowing me to properly grip and manipulate the trigger. So if you have very small hands, beware. I’m not an engineer but I would think they could made a different angle on the trigger to give it a shorter reach. I took a dremel to one of mine and cut some meat out of the backstrap to shorten it trigger reach.

Speaking of dremel tooling, I also undercut the backstrap on one of the pistols to get a better bore axis and there was plenty of extra material there so I think SCCY could lower the bore axis and improve the recoil impulse. I would also lose the finger grooves.

One thing about this gun is it’s not a Glock, so the aftermarket support is not there, as far a sights, triggers, or holsters. As I said before the front sight fits in with a hole drilled in the slide and pressed in, it seems to me it would be easy to make it Glock sight compatible; thus allowing owner to customize the sights.

With all that I might change there are things I really like about this handgun.  Dependability: I can't over emphasise how rock solid reliable these guns have been for me. For a gun you may have to bet your life on, that's very important. It should be noted that this gun also has restrike capability, if that’s important to you. The next big plus is simplicity. Man is this thing is simple. The whole gun is simple and driving out two pins lets you pull out the fire control system like a Sig 320 / 250 but much simpler. Although the company does not market it as such, you could get other frames and it would be a modular platform allowing for more customization. The pistol comes with two good quality mags one with an extended grip.

Now where does this gun fit in? Well, for me, I carry a full size handgun, most of the time. I keep this one in a holster in my pack with a box of ammo. If i find myself in a situation where I can’t carry the larger gun I, grab the SCCY and I don’t feel neutered. I also don’t worry about it banging around.

For someone on a budget they can get a SCCY new, a decent knife, and a hardware store LED flashlight and have functional every day carry (EDC) kit for under three hundred US dollars. If later they want something else, keep it as a back up.

You may have seen the SCCY handguns and thought that it was probably a cheap “Saturday night special” sub-par firearm. To be honest, I had my reservations, at first but, after much testing and evaluation I have to say it’s a real diamond in the rough, and is now my go to for students who take my instruction and need a dependable handgun for training.

So to wrap up, the SCCY won't give you a crisp 1911 trigger, the customization of a Glock, or the buttery smooth recoil impulse of a Beretta 92, but for $250.00, boy it gives you a lot. More than any other gun in its class. For the price point, there is nothing else like it. This gun is truly a dependable CCW handgun that can be obtained brand new for around two hundred and fifty dollars.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  An  Affordable CCW Handgun

Target Market: (First time handgun buyers and those on a budget.)

Key Features:

  • DAO Double Action Only
  • 10 round double stack.
  • 3 dot sights
  • Stainless steel & Polymer Constructions
  • Barrel Length: 3.1"
  • Height: 4"
  • Length: 5.7"
  • Width: 1"
  • Weight: 15oz
  • MSRP $334

What other aesthetic options or finishes are available?: These pistols are available in many colors including black, tan, red, orange, blue, pink, and purple.

What others are saying: “So, if you want a reliable, accurate, low-cost, but rugged 9mm carry pistol, all made in the USA, there’s a new name you should know: SCCY.” – Patrick Sweeney, Guns & Ammo

Price point:

MSRP = $334.00

Retail =  $250.00

I need it now! Availability: (http://www.sccy.com/dealer-locator)

Our Rating: 8.0 Great

Pros:

  • Rock Solid Reliable.
  • Good price point.
  • Simplicity

Cons:

  • Long trigger reach.
  • Long Heavy DAO trigger

SEARCH