If you are in the market for an inexpensive red dot, Gowutar is something to take a look at. I had never heard of Gowutar before they contacted me. They sell Chinese manufactured red dots on Amazon. Since a lot of the well known red dots are manufactured in China, that part didn’t bother me. So I headed over to take a look at them before I decided to review one. I then decided that the A17 micro dot might fit the bill. The A17 uses an RMSc footprint and is right at home on smaller pistols.
The Gowutar A17 has all the same features as the top name red dot’s. Most notably is its Motion Activated Illumination. This functions just like one would expect. After 4 minutes of no movement, the A17 turns off. Just slightly move the A17 and the red dot turns on. This helps give the CR2032 battery a 30,000 hour lifespan. It does use a bottom mount battery, so to change it you will need to take the optic off. There is a built-in seal to help keep moisture out of the battery, but no seal plate. The A17 also comes with a low picatinny rail mount and a bunch of screws for mounting it to different firearms. The various screws were a nice touch.
Gowutar is using a 2 MOA dot size in the A17. I like the smaller dot size. Being 2 MOA it is easy enough for me to see, but still gives pretty good accuracy at a distance. The red dot inside the A17 is really clear. It also has 10 brightness settings, 2 of which are night vision compatible, so you can adjust it to your liking. To adjust the brightness, on the left side is the “up” button, and on the right side is the “down” button. Zeroing the A17 is easy enough, but the adjustments are just friction and not clicks. The window size on the A17 is 17 mm high by 21 mm wide. I’m guessing that’s where the A17 name comes from. The window size is also on par with other red dots in this class. The A17 is also one of the sight types that has a built in rear iron sight. I like this feature and surprisingly it lined up pretty well with my front iron sight. I was able to get decent hits at 10yds using the rear iron sight on the A17.
Construction and durability are always a question of mine, at least for these inexpensive red dots. The Gowutar A17 has an outer shell made from 7075 aluminum, so it’s quality stuff. Gowutar states the A17 is shockproof to 1800G’s. But is it? The first A17 I had started having problems after about 3 months and about 400 rounds of 9mm. It started going off after a shot was fired. Then you had to smack it pretty hard to get it to turn back on. I contacted Gowutar and they immediately sent out another one. The new one has been good so far, with close to the same round count. Since I now had an extra A17 that kind of worked, I proceeded to take it outside and drop it on the concrete from about 8 feet. I did this 7 or 8 times and the glass didn’t break. Now it wasn’t on a firearm, but it still says something about the durability. It even turned on after the drops. Because of this, I wouldn’t recommend it for a “Duty” use application, and Gowutar doesn't sell it as that. But for something you use at the range, it should be a good fit.
For an inexpensive micro red dot, the Gowutar A17 is better than I expected. Yes, it had problems, but Gowutar’s customer service was great. The A17 has all the features you want in a red dot, like Motion Activated Illumination and a standard mounting footprint. Plus, it can usually be had for just over $100. I was impressed with its value and features for a range ready micro red dot. If you are in the market for something like this, check out what Gowutar has to offer.
Firearms Insider Reviews - 8 Key Points
Claim to Fame:
Inexpensive Micro red dot
Target Market:
Those wanting a RMSc red dot for the range
FNBs (Features & Benefits of this product):
2 MOA dot
RMSc footprint
Motion activated illumination
Built in rear sight
Lens Height: 17 Millimeters
7075 aircraft grade Aluminum
Fully Multi-Coated Ruby Red lens
Windage/Elevation Movement Range: ±45 MOA
10 Illumination Settings: 8 Daytime/2 NV
Shockproof: 1800Gs
Waterproof: IPX8
Battery Type: CR2032
Battery Life: 160h-30000h
Net weight: 25g/0.88oz
Length: 37mm/1.44in
Width: 24mm/0.94in
Height: 26mm/1.02in
3 year warranty
What other aesthetic options or finishes are available?
What others are saying?:
3 out of 5 stars on Amazon
Decent
I will say if you want a red dot and it’s what you can afford it’s pretty good. My problem is the battery mounts on the bottom and you can see the edge of the battery. To me it’s a little bit too exposed so I decided it would be fine on a gun I am only going to use at the range. Also you could use it on a gun that has a plate like a Canik that seats really well and covers the battery to protect it a little better.
Link to other reviews:
Price point:
MSRP = $118.99
Retail = Same
I need it now! Availability:
Our Rating:
Pros:
Motion activated illumination
Standard footprint (RMSc)
Uses standard 2032 battery
Battery Life
Durability - passed drop test
Cons:
Stopped working after 3 months (sent replacement with no problems)
Bottom mount battery
Score: 6.50 Okay
Favorite Link: Magne-Tech Rigel II