werkz

Werkz M2 holster for Polymer80

 Werkz holsters is a small kydex company located in Princeton Idaho. I first heard of them on the Handgun Radio podcast. Werkz makes of variety of formed holsters and accessories. From custom to off the shelf, they have you covered. Werkz sent me one of their M2 IWB holsters for a Polymer 80 PF940c and a M2 magazine carrier for this review.

 The M2 holster is a taco style design with some other features. A taco style holster is one that is made out of one piece of material, then folded over a mold, hence the taco name. A feature that I didn’t think I would use was the ability to convert it to an outside the waistband (OWB) holster. I found this actually quit useful when I realized that this was the only holster I had for my Polymer 80 and needed it OWB. I switched the clip to the other side. To do this, one just removes the two screws holding the clip on, and moves it to the other side. The M2 has clip locations at two heights and an angled location also. I ran the holster IWB with it angled or canted forward. This resulted in the main dislike of the holster. The clip doesn’t completely rest against the holster. It hangs about halfway off. When wearing it in this config, I felt as if it didn’t have as much surface area holding onto my belt and was also easier to take the holster off of the belt. When using the M2 in the straight upright position, this was not a factor.

 I must admit, this is one of the nicest finished holsters I have used. The edges are smooth, and I mean real smooth. It has some sort of texture on the outside. The Werkz logo is etched or laser engraved into the kydex. There are bosses where the clip is screwed on. It is open at the bottom so that a longer, or threaded barrel, will fit. The sight channel is really tall to clear suppressor height sights. It is even clearanced for a micro red dot sight.

 I’ve worn the M2 on and off since receiving it. It holds the pistol very nicely with good retention. One can adjust the retention somewhat by tightening or loosening the tension screws. The M2 does seem to print some under a T-shirt, or any thinner shirt. That is why I only wore it off and on. If I had a jacket on, no problem, but I usually just wear a T-shirt as a cover garment. I mainly wore it at the 2:30 to 3 o’clock position. Angling the pistol/holster combo forward didn’t seem to make it print any less. After about 3 days of wearing the M2, my body adjusted and it was comfortable, at least somewhat. I like how the M2 only has one wide clip, it makes it easier to locate exactly where it is the most comfortable. The M2 is a small holster, Werkz even calls it minimalist, and I’d have to agree.

 As I also mentioned, I wore the M2 as an OWB holster also. This is also when I mainly used the M2 mag carrier. I wore the M2 at a local Steel Challenge match. I was concerned using it with just the single clip. After 25 draws and reholsters, I am no longer concerned at all. It performed well as an OWB rig.

 Now a little about the M2 magazine carrier. The mag carrier is also a taco style and holds the magazine vertically. It is currently only offered for 9mm/40 Glock style magazines. As with the holster, the mag carrier clip is also reversible for IWB/OWB. I never reversed the clip, I just turned the magazine around and it worked fine. The M2 mag carrier is of the same high quality as the M2 holster.

 If you are looking for a good quality, and inexpensive holster, give Werkz a look. If the M2 is in stock, it is one of the “quick ship” holsters. So you can have it quickly also. They will also do custom holsters, if that’s what you’re looking for.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Minimalist Kydex Holster

Target Market:

Those needing a decent holster

FNBs (Features & Benefits of this product):

  • IWB - OWB convertible

  • Kydex

  • Adjustable clip height

  • 1.5” belt clip

  • Straight or canted

  • Adjustable retention

  • Useable with slide mounted optics

What other aesthetic options or finishes are available?

With or Without some rail mounted lights and colors

What others are saying?:

One holster to do it all. 5/5 stars on Amazon
By Dan S
Awesome holster. Ambidextrous carry options for every situation and adjustable retention. So far this is the only holster I could find that can AWIB and strong side OWB carry without replacing any parts, just moving some screws and bushings. Comfortable and has minimal printing. Also, you can't beat this price. Nearest comparable product from a reputable source is going to cost more for less features.

Link to other reviews:

None for this particular holster

Price point:

MSRP holster = $42.50

MSRP mag carrier = $30.00

Retail = $50.00 on Amazon

I need it now! Availability:

Werkz or Amazon

Our Rating:

Pros:

  • Great construction

  • Adjustable retention

  • Adjustable cant

  • Convertible between IWB and OWB

  • Price

Cons:

  • Holster prints

  • Clip

Score: 7.5 Good

75.jpg

 

Favorite Link:   Triggrcon