Written by: Rusty Odom

With the last year being so hard on us firearms enthusiasts finding ammo, I went back to my roots and started getting back into knives. I have a background of being a machinist, for about 10 years, prior to becoming a paramedic. I worked a lot with tool steels in various states of hardness, stainless steel, Starrett stock, hot rolled, cold rolled and so on. I have hardened all kinds of steels, ground them into cutting dies for the smallest of tasks up to 200 ton presses. I am not a metallurgist, but I do have a good base knowledge enough to be dangerous. Here is a term I like to use, “J.E.D, just enough to be dangerous.” So when I go to buy a knife I look for several things or a combination of 3 things, blade size, blade steel and carry method. With that being said, as of writing this, I have found my favorite fixed blade.

The ESEE Xancudo, a fixed blade, light weight, easy handling knife with a 3 inch blade. I have numerous ESEE blades, most of them are in the Randall Adventure Training or R.A.T line. Most of these blades are a 1095 carbon steel blade that are easy to sharpen, keep a good edge, can be used like a plow mule, but also needs care of the edge so it doesn't rust. Then while surfing the internet I came across the Xancudo, I was smitten with this blade from the start. First it has a new blade steel for the Esee line, S35VN, which has a Rockwell hardness to 59-60 rc. It is small enough to work with one hand and is very well balanced. The blade is the right width at .125” or ⅛ of an inch. It weighs in at a whopping 3.8 ounces in the hand or 6 ounces total with the sheath. The blade comes with a stone washed finish, 3D G10 scale handles, and for the best part, it is made in the USA.

The blade is a simple straight belly design with a flat back, small thumb texturing on the back, the finger choil is ground into the handle and gives a great one hand grip on it. The G10 scales are 3D cut, which means it is grippy and textured in all the right spots. The handles just seem to mold to your hand and making using it very nice. The handles are secured with allen screws and can be changed out. My particular knife is what some would call a high angle use blade because of the oval hole cut into the rear of it. You can wrap a piece of rope through it or attach a carabiner with a lanyard, so you wont drop it. They also have the option to have it without the hole. Both blades are a full tang construction through the handle.

First off I have to say I am not a fan of the ESEE sheaths, they serve their purpose and do their job well. But for me I am a sheath snob, I will call around and get a sheath made or try and find a company that already has them in stock. It is the generic style that most of their brand come with. It is a vertical carry, injected molded sheath with a spring clip on it. It also has holes so you can use some cordage and secure it to your pack. I went to RK Custom Kydex and ordered a new sheath and used some button style soft loops to carry it horizontally on my belt. This makes it easier for me to be able to grab it with either hand.

Let's get to the nitty gritty of how this knife performs. Right out of the box the Xancudo was sharp, I mean the hairs on my arms were jumping off before the blade got to them. I got this knife right at the end of summer and couldn't wait until hunting season to see how it performed. I was not disappointed at all. On two different occasions, while hunting, my 14 year old daughter harvested a couple of wild hogs. So this was the best time to put the knife to work. It cleanly field dressed the swine on the creek bank with little effort of pressure on the blade. During the skinning process it was like using a scalpel, matter of fact that is kind of how she held it. With just a little bit of motion and pressure the blade gilded through the hide, muscles, tenderloin, around the rib cage of both pigs. I examined the blade after each use and it was still razor sharp. I even put the blade back in the sheath and forgot to clean it, when I pulled it back out there was no rust to be found. I was very pleased with this. If it would have been a 1095 steel blade it would have been rusted and corroded from the blood.

So would I recommend this knife to anyone? Yes, I would! Knives are something that can last a lifetime unless you are Tony or Zane (Marines), the blade steel is forgiving, it is great for EDC, Bushcraft, hobby work, wearing around your neck, vertical, horizontally or sticking in your pocket, or securing the sheath with a piece of cord around your belt so it stays and doesn't hit the ground when you pull it out. I have several ammo cans full of knives that have been given to me or I bought on a whim, they live in those cans because my needs have changed, blade steel has gotten better. I no longer needed a 10 inch Bowie knife or a 7 inch Ontario RAT on my belt. So for what I do, this blade hits the sweet spot. Now, not to scare you off, but here is the thick of it. The price might be more than some are willing to pay. Not me, it is always Christmas because I buy my own gifts year round. I think I made up a holiday when I bought this one though. The price on the ESEE website is $186.00. I bought mine at Knifeworks for $106.95. Now that is a deal for a knife that you can pass down to your kids. On a side note, Knifeworks offers a payment plan with a 3rd party company called Sezzle, they are interest free and break up the payments into 4 instalments. So the knife just started looking better, read on for more.

So let us recap this blade:

Overall Length: 7.12”

Cutting edge: 3’

Blade thickness 0.125”

Weight: with sheath 6 ounces/without 3 ounces

Sheath: Molded or injected plastic if some sort

Finish: stone washed

Handle: 3D G10

MADE IN THE USA

WARRANTY:

ESEE knives are made with absolute attention to detail using the finest raw materials and care during the manufacturing process. We stand behind our knives with a 100% unconditional lifetime guarantee. If your ESEE knife should ever break, we will repair or replace it. This warranty follows the knife throughout its life, anywhere in the world. No sales receipt or warranty registration required.