XS Xpress Threat Interdiction Sights

By Steve Remy

These sights are primarily designed for shooters who compete in matches and need general accuracy at a maximum range of 25 yards. They are used to provide an alternative aiming platform when a magnified optic is mounted to the top rail of a rifle, considering magnification would make sub-25 yard shots difficult. The tritium front sight allows for sight acquisition in low light conditions which was a nice touch.

Out of the package these sights are built very solid and have a very nice fit and finish. XS also includes everything you need for a successful installation, except for a flathead screwdriver. This includes the sights themselves, a sight adjustment tool, a small allen wrench, a small tube of thread locker, and printed instructions. As instructed, I installed the sights to allow as long of a sight distance as possible between the front and rear sight.

Here is where things start to get ugly. By design these sights are very low profile which was the manufacturer’s effort to ensure they don’t snag on anything. The consequence to this design is that the sights rest extremely close to the bore of the rifle which doesn’t allow most people to use the sights without raising the buttstock nearly above their shoulder, thus losing their shoulder pocket and cheek weld. I tried every way of holding the rifle I could but I could never seem to easily acquire the sights and still have a decent backstop for the recoil of the rifle. I had five other experienced shooters attempt to use the sights and everyone provided the same feedback that they were too low profile for easy acquisition and use. Considering they didn’t work for me or any of the other five shooters, I would bet the majority of purchasers would be disappointed with these sights, unfortunately. A search of other reviews confirms that I was not in the minority of people who had these problems. I believe it would take a considerable amount of practice to effectively use these sights properly.

There is a little bit of silver lining to this dark cloud though, in the form of XS’ customer service. I phoned their customer service line to ask about the low profile design and ensure installation was done properly. First and foremost, I was never on hold waiting for my call to be answered; it was answered immediately by someone who knew what they were talking about. I spoke with an individual (name withheld to protect the innocent) who was courteous, friendly, and extremely helpful. He explained why the sights were designed to be low profile and admitted the sight design didn’t always work for everyone. He then proceeded to give me a laundry list of things I could do to try and make the sights work for me, which was much appreciated. He mentioned it would be helpful to break my cheek weld and bring the buttstock higher on my shoulder (which I had previously tried), and stated the low recoil of a .223/5.56 would allow for this. This tactic may work for some but it was still mighty uncomfortable for me. He also mentioned trying to roll the rifle to the 10 o’clock position instead of the 3 o’clock position they were mounted in. Having also tried this at the range, it was too awkward of a position for me, but it may work for others. The representative stated that XS had considered making a version of the sights with a higher profile so it could be used by more shooters, but admitted it wouldn’t be any time in the near future.

Overall these sights were a slight disappointment. XS’ good-willed attempt to build a low profile sight that doesn’t snag seems to have backfired somewhat by greatly limiting the number of shooters who can successfully contort themselves to use these sights. XS’ saving grace in this review was their awesome customer service who won’t leave you on hold and provides numerous potential solutions to your problems. If you absolutely must have these sights, at the very least purchase them from a place that has a good return policy in case they don’t work for you. These sights aren’t for me but I wouldn’t hesitate to purchase their other products based on their great customer service. It seems as though good customer service is hard to find these days so I must certainly give XS kudos for their success in this area.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Angle mounted sights designed for CQB situations and 3-gun rifle competitions.

Target Market: Competitive shooters who have a magnified optic mounted at the 12 o’clock position.

FNBs: (Features & Benefits of this product)

• Low-profile design.
• Tritium front sight.
• Reversible for left and right handed shooters.
• Windage and elevation adjustments.

What other aesthetic options or finishes are available?  Aluminum construction with a matte black finish.

What others are saying?  2 out of 5 star overall reviews from Brownell’s customers.

Price point:

• MSRP = $150.00
• Retail = $135.00

I need it now! Availability: Available in-stock at most online retailers, including Brownells.

Our Rating: + Solid construction. + Easy installation. + Great packaging with all necessary tools. + Excellent customer service.

- Too low profile for most people’s shooting styles. - Price is too high for something that likely only works for a small minority of shooters.

Score: 6.5

Steve’s links: Contact Steve: steve@firearmsradio.tv Firearms Radio Network

Crossbreed SuperTuck Deluxe IWB Holster

By Mike Emert

The SuperTuck Deluxe is Crossbreed’s pride and joy. They claim that this is their most comfortable and most concealable holster in their collection. They are made with a Kydex construction riveted to a leather backing. The cool thing about Crossbreed is that you have the option to order it with horsehide when it’s in stock. Many people like the horsehide because it is more resistant to sweat. Having a dry gun on a hot day is preferred! The horsehide aids in this very well. The leather is cut in a design that is unique to Crossbreed and many people love it. If you want to fork over an additional $7.50 you can get the holster with a “Combat Cut” which basically takes more leather out from behind the grip, and is cut lower, and closer to the Kydex form. There is a row of 4 holes on each side of the holster to give you the option of raising or lowering your belt clips, independently. So if you want your handgun canted forward just raise the front clip and lower the back clip to your desired location. Pretty simple. The clips themselves are my biggest hang up with it. I should first say that Crossbreed offers different clip options for an additional $10. The ones that come standard are a very shiny black and are stamped with their logo. I love their logo but that and the shininess make the clips pretty noticeable when your shirt is tucked in. I personally wear brown belts most of the time so these are not the best clips for me, but I also usually wear my shirt un-tucked so they’re not much of a problem. I hope to transition to either the J-clips or V-clips soon. As far as the tucking goes, the clips are designed with a rubber spacer to create a separation between them and the leather to make tucking your shirt in a little bit easier. Just make sure you hang on to them when adjusting the height of the clips because they are separate pieces.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The holster is strictly for wearing inside the waistband for comfortable, deep concealed carry.

Target Market: Armed citizens, Law Enforcement, and anyone else wanting to carry a gun in their pants...comfortably.

FNBs (Features & Benefits of this product) Key Features

• Leather or optional horsehide backing.
• Kydex construction riveted to the leather backing.
• Adjustable steel clips.
• You can adjust the clips to provide cant.

Key Benefits

• Very comfortable.
• Well constructed and durable.
• Comes with many options.
• You can tuck your shirt in.

What other aesthetic options or finishes are available? It comes standard as black cowhide. For $10 extra you can get Tan Hard Rolled Cowhide or for $15 extra you can get the holster in horsehide. There is an option to get a “Combat Cut” and your choice of either J-clips or V-clips for an extra $10 as well.

What others are saying? Colt Forum Triangle Tactical

Price point

• MSRP = $69.75
• Retail = Major retailers don’t carry them from what I’ve found. Every now and then you can run across a local shop that has them but it’s rare.

I need it now! Availability: Right from the Crossbreed website.

Our Rating + Very comfy! + Keeps your firearm very low if that’s how you like it. + Form fitting. + Having options for backing and clip style is nice.

- The standard clips are shiny and stamped with a logo. Although it looks great, even with a shiny black belt they stand out. They really stand out if you wear a brown belt. This is where having options for the J-clips or V-clips is nice.

Score: 8.5

Mike’s Links Firearms Insider Firearms Radio Network

Midwest Industries Gen 2 SS FF Handguard

By Agent 95

As I began to think about building my next precision rifle, I realized I wanted something lightweight and reliable.  A rifle that I can run around with (If ever needed to) without carrying too much weight. With this in mind, I knew it would be nearly impossible to have a lightweight 20” rifle, but I would try to make it as light as possible while keeping the sexy look of the AR-15.  This is when I came across the Midwest Industries Gen 2 SS FF Handguard.

I’m sure most of you readers know or have heard about Midwest Industries and their customer service. With their reputation, I decided to pull the trigger on their handguard. One thing that really attracted me to this product was the price, the design and its weight. At the time of purchase, I knew this rail would fit the bill.

MI offers this rail in various lengths to fit the look you want for your AR-15. The lengths and weight of the rails they offer are 7” (7.1oz), 9” (8.3oz), 10” (8.6oz), 12” (9.3oz) and 15” (10.9oz).

The rail will come in a sealed hard plastic cover that includes the rail itself, three (3) modular rail sections including a bipod stud, MI barrel nut wrench and a MI proprietary barrel nut. The rail has 2 studs, which fits perfectly with the barrel nut to prevent any rotation. The barrel nut also has a checkered cut design that is designed to prevent rotation of the handguard.

Overall, the Midwest industries really hit the spot on this handguard. It’s lightweight, durable and easy to handle. Who wouldn’t want to get their hands on a piece like this?

Firearms Insider Reviews - 8 key points

Claim to Fame:  Lightweight and tough build.

Target Market:  3 gun shooters, run and gun shooters, recreational shooting.

FNBs (Features & Benefits of this product)

Key Features:

• 6061 Aluminum.
• Hard Coat Anodizing.
• 1.5” outside diameter.
• Free floating.
• Lightweight.
• Great length selection for all builds.

What aesthetic options or finishes are available? It comes in Black, Flat Dark Earth and Olive Drab Green. Weights and Lengths are listed in my description above.

What others are saying?

• Tactical Gun Review
• Colddeadhands.us

Price point

• MSRP = $139.95-$189.95 (Special Pricing from MI at the moment)
• Retail  = $139.95-$189.95

I need it now! Availability

Brownells, and many other locations.

Our Rating +Very comfortable to hold. +Extremely lightweight. +One piece free float design. +Great value for what you get.

-Since the rail’s diameter is so small, it is more prone to heat after rapid fire.

Score = 9.0 

Otis Ripcord

By Steve Remy

 For anyone who has ever wished for a better one-pass cleaning cord/cable, it seems as though your wish has been granted, courtesy of Otis Technology.  Otis recently introduced the Ripcord which is a molded rubberized core wrapped in Nomex and capped off on each end by female 8-32 standard threads.  Upon pulling it out of the packaging, you can tell right away that it has many features that competing cords do not.

To begin with the core construction, you stand a minimal chance of breaking this device mid-pull through your barrel.  I securely attached one end of the Ripcord to my workbench and gave it several violent tugs but was unable to break the Ripcord.  I have broken a few competing bore cleaning devices where the pull cord attaches the cleaning section, but there really are no worries about that happening with your Ripcord.  The one piece core is fairly stiff which aids in placing the cord into the breech of your barrel.  It also has a helix shape which according to Otis, engages rifling through the length of the barrel.

The Nomex construction allows you to clean a hot barrel without the material melting, not that I regularly clean hot barrels, but it is nice to know that I can run this through my firearm right before I leave the range so it is one less thing I need to do when I get home.  No more waiting for your firearm to cool down.  My favorite feature of the Ripcord is the ability to attach any 8-32 standard thread attachment to either end of the device.  Instead of soaking the fibers themselves in cleaning solution or oil, I can simply attach a patch holder to the end with a patch soaked in whatever cleaning solution or oil I choose.  I can also attach a bore brush to the end if the barrel was particularly dirty or needed an extra aggressive scrub after a day at the range.  This feature alone adds nearly unlimited versatility to the Ripcord.  In my opinion, this extends its service life since competing bore devices don’t give you the ability to change integrated bore brushes.

Pulling the Ripcord through the barrel requires a little bit of strength, which is good in my book because it means there is sufficient friction between the barrel and the Ripcord to clean the barrel as designed.  However, this is where my one bit of critical feedback lies.  I wish Otis would include one of their t-bar attachments with each Ripcord.  This would allow users with less than sufficient strength to still use the device by pulling on the t-bar instead of having to pull on the cord itself.  This addition would make the Ripcord a near-perfect bore cleaning device.

Overall, the Ripcord is a huge win for gun owners.  Its $14.99 MSRP is extremely reasonable and makes the decision to purchase one of these for each caliber of firearm you own an easy one.  Current available calibers are .22/.223/5.56, .308/7.63, .38/9mm, and .45.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  A convenient and effective one-pass bore cleaning device designed for easy breech-to-muzzle cleaning.

Target Market:  Convenience-minded people who like to clean their guns.

F&B’s:

• Helix shape.
• Nomex cleaning surface which is heat resistant to 700 degrees.
• 8-32 standard threaded ends for attachments.

What aesthetic options or finishes are available?  Each different caliber is color coded.

What others are saying?:

“Leave it to Otis R&D lab to build a better mousetrap or perhaps more accurately, reinvent the wheel.  If you’re thinking of buying an old fashioned bore snake, get this instead” -Rob Kay of Hawaii Reporter.

Price point:

• MSRP = $14.95
• Retail = $14.95

I need it now! Availability: Readily available at most firearm accessory retailer websites.  Available at Brownells with great service and quick shipping.

Our Rating: + Threaded ends for attaching accessories. + Durable core and Nomex cleaning surface. + Strong construction won’t break during cleaning. + Cost is very reasonable.

- Isn’t sold/packaged with a t-bar.

Score: 9.0

Steve’s Links:

steve@firearmsradio.tv

Gun Guy Radio

Firearms Radio Network

North American Arms .22 LR Mini-Revolver

By Ryan Michad

You can get many accessories for this gun, including a belt buckle holster and a folding grip/pocket clip to carry the revolver. If you live in an area where snakes are prevalent, you can load the revolver with shotshells to take care of those if the need arises.. The sights really aren’t that usable. This is truly a point and shoot weapon. It’s effective distance is typically no greater than ten feet. It is slow to reload, requiring you to pull the cylinder pin out and remove the cylinder. Then you have to punch out the empties manually with the cylinder pin. If you don’t have a proper hold on it, the gun tends to roll back in your hands on recoil.

 Firearms Insider Reviews - 8 Key Points

Claim to Fame:  An EXTREMELY small single-action .22 LR revolver meant for deep-concealment.  Can also be used as a backup gun or a fun range gun.

Target Market:   Concealed Carry Permit Holders, Hikers, Police Officers desiring a small last ditch gun.

F&B's: (Features and Benefits)

Key Features

• All stainless steel construction
• Single-Action
• Chambers .22 Long Rifle
• Holds 5 rounds
• Exposed Spur-type Trigger
• 1 ⅛” Barrel
• Weight: 4.5 ounces

Does it come in black?   The NAA Mini-Revolver comes only in stainless steel.  There are other distributor-specific models that may have varying finish types.

What others are saying:  “I literally had a blast testing the little mini-revolver. I fired a couple hundred rounds through it. This was not all in one session, as loading and reloading are slow. I fired four different types of .22 LR ammo and had zero failures to fire. ” -Survival Blog

Price point:

• MSRP = $209.00
• Retail = $189 to $210

I need it now! Availability:  These can be found at most gun shops and on Gun Broker.

Our Rating:

+  It is an EXTREMELY small pistol.  It can be carried in a shirt pocket without any trouble, and allows you to be armed when it would          not be possible otherwise. +  Even though it is a small handgun, it is not cheaply made. This is a quality handgun and it shows. +  It is very corrosion resistant thanks to its all stainless steel finish. +  It has safety notches in the rear face of the cylinder that allow you to carry the gun fully loaded with the hammer down, safely..

Score:  7.5 

Ryan Michad’s Links

Handgun Radio

Heckler & Koch USP .40 Compact

By Steve Remy

 The H&K USP .40 Compact is a highly reliable gun that I would have no problem entrusting my protection to.  I fired nearly 2,000 rounds down the barrel of this pistol with zero malfunctions of any sort.  The ammo ranged from brass to steel case, and ball to hollow point.  This particular model being reviewed is considered to be a “variant 1” meaning it has a de-cocking lever that doubles as a safety. This H&K can be carried in double action (DA) with the safety on/off, or be carried in single action (SA, cocked and locked) with the safety on/off.  The pistol is fired in either DA/SA mode or SA only.  These features alone allow a multitude of user carry configurations that will meet most people’s personal carry preference.

The HK grips well and feels extremely comfortable when firing.  For added comfort and as a personal preference, I chose to add a slip-on finger groove grip.  The ambidextrous magazine release is a bar across the front strap where the trigger guard and the front strap meet.  It is easy to access without rotating your hand to a mag release button as many left handed shooters must do with non-ambidextrous mag releases.

The gun is easy to disassemble by pushing out the slide release lever and moving the slide forward off of the frame.  The recoil spring is self contained meaning the spring is held in place on the spring guide by a small c-clip.  This only becomes a problem when the c-clip mysteriously disappears during a trip to the range and the spring flies off the guide rod when you begin your cleaning process.  As you can tell, this happened to me about 1,500 rounds through the gun.  Here is where it gets somewhat grim.  HK’s customer service was pretty dismal when I called them about the problem and asked for a replacement c-clip.  My first call was to HK’s main customer service line where I was connected with someone who determined this particular part was out of stock and was unsure of when it would be available.  Being out of stock is understandable in some situations, so I called my area HK law enforcement rep to see if he had any available for purchase.  I spoke with him and he indicated he had a few and could spare a couple to send me free of charge.  After taking my name and shipping address, I didn’t receive anything or hear from him for a couple of weeks.  All subsequent phone calls and messages went unreturned.  In my book this was unacceptable.  Luckily the gun still functions flawlessly without the c-clip, but reassembly after cleaning is now a frustrating and somewhat comical experience.  It takes three hands but unfortunately I only have two, so I am constantly annoyed by their lack of responsiveness.

The HK shoots as accurate as any other well-made compact pistol on the market, especially in the sub 10 yard fighting range where must gun fights happen.  The controls are smooth and easily activated but the trigger could use some work considering this gun will cost most people nearly $900-$1,000 after taxes and FFL fees.  The trigger was jumpy out of the box and never seemed to smooth out during the 2,000 rounds fired.  For the price of the gun I would expect the trigger to be butter smooth, especially knowing the quality engineering that went into producing this gun.

Overall the USP compact is very reliable and backed by a company known for producing high quality firearms.  However, with the price point being nearly $1,000, one must consider the ability to purchase at least two other handguns with similar reliability and functionality for the same amount of money.  There is somewhat of a novelty in owning an HK and many people have purchased one for themselves as a commemorative-type gift.  Being somewhat of a pragmatist if I had $1,000 devoted to purchase another handgun, I might opt in the future to purchase multiple handguns instead of one HK; afterall, isn’t two always better than one?

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A smaller framed pistol capable of reliable use and engineered for a 20,000 round service life.

Target Market: Concealed carry license holders, home defense, plain clothes law enforcement.

F&B's:

Key Features

• Polymer frame
• Polygonal bore profile
• Captive recoil spring
• Bobbed hammer
• Accessory rail
• Ambidextrous magazine release

Does it come in black?  Yes

What others are saying?:

• “After living with the USP compact on a daily basis for several months, I found it a fine example of modern pistol manufacture.” -R.K Campbell of GunWeek.com
• Guns.com Review

Price point:

• MSRP = $855.00
• Retail = $830.00

I need it now! Availability:  Readily available at most firearms retailers both online and in stores.  Available at BudsGunShop.com for a good price and quick shipping.

Our Rating:

+ Lightweight polymer frame that is easily concealable. + Proven reliable H&K engineering. + Great fit and finish. + Balances and grips nicely. + Easy to disassemble and clean; self-contained recoil spring aids in this.

- Slightly jumpy trigger pull. - Customer service and product/replacement part support is severely lacking. - Cost is within the higher range of pricing.

Score: 8.0

Steve’s Links:

Gun Guy Radio

Firearms Radio Network

Streamlight Nano Light

By Devin Blystone

This is one of the most compact flashlights I’ve ever seen or used. It’s not the brightest flashlight but for its size, it’s more than adequate. I’ve used this flashlight for lighting up a lock, finding lost items, and to light my path in the dark. I can also attest to its claim to be weatherproof since I lost mine during the winter and found it after the snow melted, half buried in mud. A quick trip to the sink cleaned it up and showed that it was still working great.  

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Tiny, weatherproof personal flashlight

Target Market: Every day carry, keychain light

FNBs (Features & Benefits of this product)

• Easily attaches/detaches to just about anything with convenient pocket clip or key ring.
• Up to 8 hrs. run time.
• Machined aircraft-grade aluminum with anodized finish.
• 100,000 hr. lifetime high-intensity LED.
• LED available in white (10 lumens).

Does it come in black? Black, Blue, Pink, Red, Coyote, Orange.

What others are saying? “Perfect EDC”

• Amazon
• LA Police Gear

Price point (MSRP versus actual retail)

• MSRP = No price listed
• Retail = $6.87-$11.60 Amazon, $5.99-$7.99 LA Police Gear

I need it now! Availability: They may have some models at Walmart but Amazon and LA Police Gear have tons of availability.

Our Rating + Long run time. + Multiple ways to attach it to things. + Batteries can be found cheap online. + Weather proof. + Sturdy.

- The finish chips off if stored on a key ring. - Doesn’t provide a good grip to twist on/off.

Score 8.5 Great

To hear more about this and other gear go check out the Firearms Radio Networks new show Firearms Insider Gun & Gear Review Podcast.

Smith & Wesson S.O.R.T Knife

By Devin Blystone

Unfortunately this is a discontinued knife so there’s not a lot of availability. On the other hand, it’s a nice enough knife that I still carry it every day. With a quick application of a red and green sharpie to the safety so that its easy to tell if it’s engaged and it makes the knife and easy 8 or 9. If you need a pocket knife and don’t mind getting a discontinued model for cheaper, I’d recommend this knife.  

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Fast opening, comfortable and practical.

Target Market: Anyone who carries a pocket knife.

FNBs (Features & Benefits of this product)

• Safety, to keep it from opening in your pocket.
• Liner lock.
• Thumb stud and index finger for opening.
• Assisted opening.
• Removable pocket clip.
• Available with or without serrations.

Does it come in black? It comes in black and champagne(silver)

What others are saying? People seem to like it,  except that Amazon kept messing up their orders. Amazon reviews.

Price point (MSRP versus actual retail)

• MSRP = Discontinued
• Retail = $31.95 bladehq.com

I need it now! Availability: You can buy it at Blade HQ and there were some on ebay at the writing of this review. Local shops may also have old stock for sale.

Our Rating + Quick opening. + Easy to manipulate. + Nice grips. + Powerful pocket clip.

- Safety can fail if you try to open it hard. - Safe/unsafe is not marked, have to remember.

Score 7.5 Good

To hear more about this and other gear go check out the Firearms Radio Networks new show Firearms Insider Gun & Gear Review Podcast.

Glock 20 Gen 4 10mm Auto

By Reed Snyder

I have always been a Sig Sauer enthusiast. When my sights strayed from the line of pistols that were my first love, they never fell on polymer pistols. I have however always been curious about the 10mm cartridge. Along my travels, I then developed an appreciation for the .357 Sig cartridge, a distant cousin to the 10mm. When Glock began phasing in the 4th generation of pistols, I found myself drawn to the G20. My desire to acquire a polymer pistol I once scoffed at was again strengthened as I discovered the range of aftermarket barrels that could be installed in the G20. The available barrels allow for the chambering of the .40 S&W as well as the venerable .357 Sig. I was sold, I had to own one. I began my search and failed to find an internet source that priced the pistols anywhere near retail. I was shocked to not only find one in stock at my Local Gun Store, but I found one that was priced to sell at the MSRP. I took my pistol to the range and I was very impressed with how the G20 tamed the 10mm cartridge. Glock and its products have earned a reputation for reliability and simplicity, and justifiably so. The G20 Gen 4 does not disappoint in this regard. The G20 is only slightly larger than the G17 in most of its dimensions and is not all that different in its handling. I am growing fonder of the polymer pistols as I spend more time with the G20 and make no mistake about it, I love my G20. However, I am reminded that the money I saved by buying a polymer pistol may have been in part due to the simplistic standard sights and the rather rough factory trigger. The aftermarket parts arena makes provision for a number of upgrades that can easily take the edge off my dissatisfaction with those two items. After spending time on the pistol, I would heartily recommend the G20 to anyone interested in the 10mm cartridge or a Glock enthusiast looking to complete their collection.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  Reliability and Simplicity

Target Market:  Hunters and Enthusiasts

F&B's:

• Key Features

1. Polymer frame.
2. Aggressive stippling on the grip
3. Glock’s “Safe Action”® System.
4. Dual Recoil Spring Assembly
5. Modular Backstrap System
6. Enlarged Reversible Magazine Catch.
7. Loaded chamber indicator

• Key Benefits

1. Light and durable
2. Design and construction reduces felt recoil
3. Easy to take down and service

Does it come in black?:  Aftermarket parts are widely available as are aftermarket barrels.  Examples of where to find them are listed below.

• Lone Wolf Distributors
• Glockmeister
• Fire Dragon Barrels

What others are saying?:

• The Truth About Guns
• Guns & Ammo

Price point:

• MSRP = Glock Site - MSRP is not readily available
• Retail = The G20 Gen 4 is a little hard to come by.  Retailers are selling the Gen 3’s as fast as they can to clear inventory, so availability of the Gen 4’s is spotty.

I need it now!:  Gunbroker.com is the place with the most access to available G20 Gen 4’s.

Our Rating:

+Recoil from the 10mm cartridge is tamed +Simple controls and manual of arms +Reliability, reliability, reliability. +Reasonably priced

-Standard Glock sights -Unsatisfactory factory trigger

Score - 8.0 Great

Reed Snyder

Host - AR-15 Podcast.com

Beretta PX4 Storm Compact

Beretta is one of the oldest gun makers in the world and I think the experience shows in this pistol. I’ve never had a FTF, FTE, or any kind of complications. Other than the things I don’t like listed below, I can’t complain. The stipling issue was easily overcome by using automotive grip tape, similar to that on skateboards. It can be found at Walmart and many hardware stores, and tutorials on how to apply it can be found on youtube. The take down and cleaning of it are easy as well. Beretta says they’ve used their experience with the M9 in sandy environments to produce a better functioning firearm. Unlike other manufacturers who crank out a new model every year they took their time to produce this masterpiece. Although it has some shortcomings, no product is perfect. It is a very reliable and accurate firearm that is great for conceal or open carry. I think this is one quality gun that I won’t be switching away from for a long time.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Capacity, durability, controllability.

Target Market: Duty carry, home defense, concealed carry.

FNBs (Features & Benefits of this product)

• Polymer frame.
• Ambidextrous safety/decocker(Type F) and slide stop lever.
• DA/SA .
• 10, 15, 17 and 20 round magazines(9mm).
• Can change the magazine release to the other side.
• Different backstraps.
• Integral/retractable lanyard loop.
• Accessory rail.
• Easy to take down.
• Rotary barrel system to reduce recoil.
• Available in 9mm and 40 S&W.

Does it come in black? (What aesthetic options are there?) It only comes in black.

What others are saying? “Carried a Kimber Stainless ultra Carry II, now its the Px4 Storm compact” Beretta

Price point (MSRP versus actual retail)

• MSRP = $575 Beretta
• Retail = $500.16 Grab A Gun,  $537.99 Impact Guns

I need it now! Availability: Check your local gun shops. Also it can be bought at many websites including gunbroker.com and armslist.com.

Our Rating + The finish is semi matte. + It’s easy to conceal carry. + It doesn’t catch on my clothing. + Fits great in my hand. + Different backstraps to fit different hand sizes. + Nice slide serrations.

- At 27.3 oz empty weight it feels a little on the heavy side. - The finish has worn off in spots because of holster wear. - The side grip stippling was lacking. - You have to disengage the safety, adding time until you can fire it.

Score 8.5 Great!

To hear more about this and other gear go check out the Firearms Radio Networks new show Firearms Insider Gun & Gear Review Podcast.

Ruger SR-22

By Ryan Michad

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A lightweight polymer .22 LR Semi-Automatic pistol suitable for a variety of applications.

Target Market: Trainers, plinkers, small game hunters and hikers.

F&B’s: (Features and Benefits) Key Features

• Comes with two 10-round magazines.
• Hammer Fired.
• Chambers .22 Long Rifle.
• Combination Manual Thumb Safety & Decocker.
• Adjustable Three Dot Sights (White).
• Length: 6.4 inches.
• Width: 1.29 Inches.
• Weight: 17.5 ounces.
• Ambidextrous Slide Stop & Reversible Magazine Release.
• Threaded Barrel for Suppressors.

Does it come in black? The Ruger SR-22 sports an aluminum slide and a polymer lower. It only comes in that finish.

What others are saying? “Shooting the SR22 Pistol is a real pleasure. As noted above, functioning was perfect. The magazines are very easy to load, the pistol feels good in the hand, and recoil is very light, as it is with most any 22 Long Rifle pistol. ” -Jeff Quinn, Gunblast.com Review

Price point:

• MSRP = $399.00
• Retail = $329 to $349

I need it now! Availability: These can be found at most gun shops and on Gunbroker.com

Our Rating: +  The pistol runs consistently. I have shot several hundred rounds of suppressed and unsuppressed and have had total reliability. +  I love that the gun is hammer fired and not striker fired like most polymer handguns. +  Like most modern polymer handguns, it is very corrosion resistant. +  It comes with two 10 round magazines. +  The barrel is threaded which makes attaching a suppressor easy. +  The sights are high enough to clear most .22 Suppressors.

-  I don’t care for the ambidextrous safety/decocker. -  In order to use the threaded barrel, you need an attachment. The attachment is sold separately.

Score: 8.5 Great!!!

Ryan Michad’s Links Handgun Radio

Smith & Wesson M&P .22 Pistol

By Ryan Michad

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  A .22 plinker modeled after the extremely popular M&P series of pistols.

Target Market: Trainers, Plinkers, Small Game Hunters

FNBs (Features & Benefits of this product)

Key Features:

• 12+1 Round Capacity.
• Chambers .22 Long Rifle.
• Pivoting Trigger Safety & Manual Thumb Safety.
• Three Dot Sights (White).
• Length: 7.6 inches.
• Weight: 24 ounces.
• Ambidextrous Slide Stop & Reversible Magazine Release.
• Threaded Barrel for Suppressors.

Does it come in black?  The S&W M&P .22 comes with a corrosion resistant finish on the slide and other metal parts, and has a polymer lower frame.

What others are saying?  “I think the new M&P22 makes a lot of sense for anyone who shoots a centerfire M&P pistol for duty or for personal protection. ” -Joel Hutchcroft, Shooting Times

Shooting Times Review

Price point (MSRP versus actual retail)

• MSRP = $419.00
• Retail = $330 to $419

I need it now! Availability:  These can be elusive sometimes, but there are some available at most gun shops and on Gunbroker.com

Our Rating

+ The pistol runs reliably. I have shot several hundred rounds suppressed and unsuppressed and have had total reliability. + The ergonomics of the M&P series pistols are amazing and allow for great control of the firearm. + It is very corrosion resistant, like most modern polymer handguns. + The barrel is threaded which makes attaching a suppressor easy if you desire to do so. + The sights are high enough to clear most .22 suppressors.

- I don’t really like the ambidextrous thumb safety. - It comes with only 1 magazine.

Score: 9.0 Amazing!!!

Ryan Michad’s Links

Handgun Radio

Smith and Wesson M&P Shield 9mm

By Ryan Michad

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A highly concealable and comfortable 9mm pistol with the great ergonomics of the Smith & Wesson M&P Series pistols.

 Target Market: Concealed Carry Permit holders; Home Defense

FNBs (Features & Benefits of this product) Key Features:

• 7 & 8 Round Single Stack Magazines.
• Chambers 9mm Parabellum.
• Pivoting Trigger Safety & Manual Thumb Safety.
• Three Dot Sights (White).
• Frame width of only 0.95 inches!
• Weight: 19 ounces.
• 6.5 lb trigger pull.

Does it come in black?  The S&W M&P Shield comes with a corrosion resistant finish on the slide and other metal parts, and has a polymer lower frame.

What others are saying?  “It is thin and lightweight, but shooting the Shield feels like shooting a larger weapon, in that the design of the grip handles recoil very well, with either magazine in place.” -Jeff Quinn, Gunblast.com

Gunblast.com Review

Price point (MSRP versus actual retail)

• MSRP = $449.00
• Retail = $379 to $449

I need it now! Availability:  These can be fairly tough to find right now, but there are some available at most gun shops and on Gunbroker.com

Our Rating:

+ The Shield is EXTREMELY thin, which makes it very comfortable to carry. + Even though it is thin, it handles recoil very well. The M&P Series of pistols have some of the most comfortable grips I’ve ever felt. + It is very corrosion resistant, like most modern polymer handguns. + It comes with one magazine with an extension, and one without.

- The sights are great, but night sights would be a plus for low light conditions.

Score: 9.0 Amazing!!!

Ryan Michad’s Links

Handgun Radio

Fobus Paddle Magazine Pouch

By Steve Remy

At first sight, it looks like a convenient mag pouch with a slip on/off paddle design.  Over the past two years, I have worn this mag holder for at least 5 days per week upwards of 10 hours per day; I can honestly say I don’t like it at all.  Considering most of my work involves wearing plain clothes, the paddle design is ideal because it slips on and off when needed.  The rubberized backing on the paddle also helps keep the pouch in place even during rigorous running, jumping, and fighting.  With that being said, the built-in passive retention the pouch provides to the magazines themselves is severely lacking.  At first everything felt great, but after a few months of usage, all retention went out the window and I was forced to modify the pouch with additional soft velcro to hug my magazines.  This only bought me a few more months of retention though, which was frustrating.

At that point, I called Fobus customer service who was happy to fulfill their lifetime no questions asked warranty.  They requested I send them my old pouch and promptly sent me a brand new replacement.  Problem solved, right?  Unfortunately, the same retention issue developed and I am in the “add more velcro” stage of ownership right now with my replacement.  Even with light physical activity I’ve lost one or both magazines on the pavement (luckily to be found quickly).  At least Fobus’ customer service was helpful and willing to replace their product; unfortunately I think the design in flawed in a few places.

The other rub (literally) I have with the pouch is two tabs that are molded into the top of the pouch where the paddle is riveted to the pouch itself.  If I am wearing an undershirt, these sharp tabs don’t typically bother me unless I am in the car for an extended period of time.  However, living in a climate that regularly reaches 100+ degree temperatures during the summer months, I don’t always wear an undershirt, which is where this pouch severely pains me.  It feels like I have two thumb tacks driven into waist at times, which works well for late nights on surveillance when I don’t want to fall asleep, at least.

Overall, this pouch is not designed for extended use or comfort.  With a retail price of $29.99, there are better paddle options out there.  I originally purchased this pouch because it was readily available at my local police supply store and inexpensive.  This one falls into the “should have spent more money on a better product” category.  I’ll soon be replacing this pouch as my primary plain-clothes mag pouch, hopefully with something that provides more retention and comfort, with a convenient paddle design as well.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A maintenance free injection molded polymer double magazine pouch.

Target Market: Concealed carry holders, executive protection professionals, and non-uniformed law enforcement officers.

FNBs (Features and Benefits):

Key Features:

• Injection molded polymer construction
• Rubberized paddle
• Passive retention.

Key Benefits:

• Convenient slip on/off paddle design
• Complete with an unconditional lifetime warranty.

Does it come in black? Yes, black is your only option.

What others are saying? Legion’s Fate Review

Price point:

• MSRP = $29.99
• Retail = $19.39 at Optics Planet

I need it now! Availability:  Available at multiple locations both online and in-store.

Our Rating:

+ Convenient paddle design with good on-pants retention. + Rubberized backing on paddle to help pouch stay in place all day even through vigorous activity. + No nonsense guarantee; if it breaks for any reason, they’ll repair or replace it for free, forever.

- Comfort is severely lacking. - Retention of magazines quickly reduces requiring additional modification to hold magazines in place. - Lack of concealability.

Score: 4.0 (Bad)

Steve’s links: GunGuyRadio.com FireArmsRadio.tv

FrogLube CLP Lubricant

By Ryan Cross

Firearms Insider Reviews – 8 Key Points

Claim to Fame The World’s Only Complete ‘Green’ Weapons Care System. USDA Certified Bio-Based Product. Eliminates Residue. Non-Flammable. Non-Toxic. Improves Accuracy. Developed by former and active duty U.S. Navy SEALs.

Target Market All Gun Owners High round-count shooters

FNBs (Features & Benefits) Froglube CLP is available in liquid, paste or cloth wipes in multiple volume quantities.

From product website: “FrogLube is a heavy specific gravity “food grade” mixture that seeps deep into the micro spaces of the metal and acts as if to ‘season’  the surface of the bore, any friction points and all areas treated with the lube. Once treated, fouling particles resist bonding to metal surfaces;  instead, they easily wipe away or brush off the surface. This also applies to other loose fouling particles such as dirt, dust and sand.  FrogLube does not film, nor is it a coating. Instead it is a treatment that is absorbed throughout the firearm.  It is water insoluble and will repel water and resist corrosion.”

Solvent variety in spray bottle is also available, but CLP works pretty well in breaking up carbon if applied, left to set for approximately 15mins, and then wiped off.

Key Benefits Makes firearms more accurate (through decrease friction and mechanical wear). Cleans, Lubricates and Prevents Rust (CLP) by embedding deep into the metal’s pores. Repels water, dirt, and other particulates. Does not require baking or special preparation of surface, but heated metal will accept      the ‘Frog Love’ better. Harmless to plastic and rubber. Wipes can be cut into smaller squares and used as bore patches.

What others are saying? “Simply the best product you can buy. FrogLube eliminates all lubrication related problems. Clean up is a breeze. All of my customer are amazed with their firearms after I do a FrogLube application. It is the only lubrication product I recommend.”         - Premier Shooting LLC

“As long as they keep making this stuff, and as long as they don’t change the formula, and as long as it keeps working, I’ll keep using FrogLube.” - www.guntorturetests.com

Price point (MSRP versus actual retail) MSRP: Liquid 4 oz. bottle $19.00, Paste 4 oz. jar $12.00, Wipes 5 pack $8.99, Solvent Spray bottle $34.00, Complete set available at $49.99

 I need it now! Availability  Dealer Map Official FrogShop Promised Land Firearms

Our Rating – I really enjoy Froglube as an addition to my cleaning kit. The liquid is great for internals and moving parts: just a few drops on the bolt and work the action a few times, and it’s covered. It is only a little more expensive per ounce than other products, but then again you only need to use small amounts so it will last you longer and it's also not a great substitute for toothpaste, trust me.

+ Liquid form doesn’t evaporate like other lubes + Viscosity of liquid form is just right, not too thick to gum up moving parts and not too thin to run all over the place + A little bit goes along way, it won’t evaporate like other lubes + Wipes are great for treating barrels (especially bead blasted stainless steel or other finishes that need rust protection) or cut into smaller square patches, making bore cleaning a snap. + Smells and tastes like wintergreen flavored gum, it’s quite pleasant actually.

Score 9.0 Amazing!

Featured FFL: Promised Land Firearms

Ryan Cross’ Links: Hunter of Design

Smith & Wesson M&P 15-22

By Steve Remy

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A great way to shoot and spend time behind an AR platform rifle on a budget with .22LR ammo.

Target Market: Anyone who wants to learn the AR platform in a less intimidating form, shoot for less money, shoot a lighter weight rifle, or have some good clean fun.

FNBs: Key Features:

• Polymer upper and lower for reduced weight.
• Identical operating features of an AR15.
• Polymer magazine.
• Polymer quadrail handguard.

Key Benefits:

• Identical look, feel, and operation of an AR, without the weight.

Does it come in black? Yes, and a few other colors as well.

• Pink Platinum
• Realtree APG HD Camo
• Flat Dark Earth (MOE)
• OD Green (older models)

What others are saying? Gunblast.com review Monderno.com review

Price point:

• MSRP = $499 - $769 depending on configuration
• Retail = $448 at Budsgunshop.com

I need it now! Availability: Available at most any online retailer or local store.

Our Rating: +  Made in the U.S.A. +  Identical operating features of the AR +  Quadrail available from the factory +  Multiple color options to suit different personal tastes

-  Nearly 100% polymer, including the charging handle -  OD Green color is a little too green and not enough OD

Score: 8.5 (Great)

Steve’s links: GunGuyRadio.com FireArmsRadio.tv

This is a great .22LR rifle that fulfills its intended purpose.  It’s a great way to learn or practice on the AR platform without the expense of .223/5.56 ammo.  My only problem with the rifle is that it is all polymer and the feel of it just doesn’t sit right with me compared to an actual AR.  I realize it is a .22LR variation intended for a much different purpose than a non-polymer AR, but having become accustomed to actual ARs over the last 15 or so years, the feel and weight distribution will take me a little time to get used to.  I feel almost as if I am going to break the rifle if I get too rough with it…I won’t be hammering any nails, digging out stuck vehicles, or dragging this down any hallways during training because I just don’t know what I’ll end up doing to it.  I even feel as if I have to go easy on the charging handle because that too is polymer.  Oh well though, if anything breaks I’ll just send it back to S&W and hope their customer service takes care of the rest.

With all that being said, this will stay in the safe with the rest of my firearms for many, many years.  Its fun and inexpensive to shoot, nearly anyone from children to experts can shoot it accurately, and it has worked flawlessly so far for me.  Rest assured when they are old enough, this will be the first AR platform rifle my kiddos get to shoot with.  I’ve shot it with CCI mini-mags and other assorted .22LR ammo I could scrounge up and the rifle never had a single hiccup.  There is something very positive to be said about a .22LR rifle that can eat almost anything since most .22LRs are very picky about what they will and won’t shoot.

Overall I would buy this rifle again, which I may have to do once the kiddos start arguing over who gets to use what at the range.  I would also recommend it to any friends that were in the market for one.

Raven Concealment Systems Phantom Modular Holster

By Steve Remy

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A highly concealable kydex holster designed to work with any style of clothing.

Target Market: Concealed carry holders, executive protection professionals, and non-uniformed law enforcement officers.

FNBs: (Features and Benefits) Key Features: Full kydex construction. Full-length body shield to help re-holstering. Same holster body can be used as either IWB or OWB. Passive retention with no need to manually depress anything to draw your weapon.

Key Benefits: Sleek holster that conceals your firearm extremely close to your body. Complete with an unconditional lifetime warranty.

Does it come in black? Yes, with one other optional color as well. Coyote Tan

What others are saying? USA Carry Review MDTS Training Review

Price point: MSRP = $84.99 - $94.99 depending on configuration (light or no light) Retail = $84.99 - $94.99 at RavenConcealment.com

I need it now! Availability: Holsters fitting 20 different handguns are available for shipment within 5 days of ordering.  If you need a holster for any other handgun, your wait time varies depending on the number of orders ahead of you.  Current wait time is not available on Raven’s website, unfortunately.

Our Rating: +  Made in the U.S.A. +  Durable construction +  No nonsense guarantee; if it breaks for any reason, they’ll repair or replace it for free, forever. +  Concealability is untouchable by any other holster I’ve owned or tried. +  The modular design allows it to work with all of Ranven’s accessories (mag holders, handcuff holders etc.)

-  Waiting to have my order made -  Price

Score: 9.0 (Amazing)

Steve’s links: GunGuyRadio.com FireArmsRadio.tv

This is the best concealment holster I have ever owned.  A fellow officer turned me on to Raven Concealment products several years ago and I have been extremely impressed.  I first purchased a Phantom holster in late 2010 to carry my duty weapon in a variety of situations, from courtroom suits to street-work jeans.  This holster is extremely durable and has served me well to date.

This holster holds your handgun so close to you that it takes a little getting used to.  With that being said, trying anything else after this makes you feel like your gun is overexposed and riding out about 3 feet away from your hip.  Having it rest so close to you starts to give you that warm and fuzzy reminder that you are one with your handgun and together you can defeat anything that threatens you or your loved ones.

On top of all of this, Raven Concealment has an unconditional lifetime warranty which literally says no matter how you break it, they’ll repair it or replace it for free.  Folks, guarantees don’t get any better than that.  The same officer that introduced me to Raven had an issue with his holster last year.  He was in an extended training environment for 3 weeks straight in which he was required to carry a red gun at all times while in training.  The dimensions of the red gun slightly exceeded that of his actual firearm, resulting in less than ideal retention for his duty weapon once training was over.  He simply called Raven, told them the problem, shipped them the holster and they repaired it no questions asked.  It was a simple and quick process.

Pricing and order lead time are the only slight bit of heartburn I have with this holster.  At $84.99, it ranks in the top percentage of pricing for holsters of similar design.  In addition to that, no one wants to wait to enjoy their new purchase.  When I first purchased mine, I waited nearly 6 months to receive it.  I believe the company has had significant growth since 2010 so at this point I hope their lead time has been reduced to something more reasonable.  I do like the fact that they now have “quick ship” items available for purchase, which are likely their top requested models, so the wait doesn’t affect all customers.  Moving back to price, once you consider this may be the very last holster you buy for your favorite gun, it really isn’t that bad.  I’ll never buy another concealment holster for my duty gun which means I’ll likely save money in the long run.

Overall, kydex concealment holsters don’t get any better than this, period.  If my department chooses to change duty guns, Raven Concealment will be my first stop to order a new holster.

Sig Sauer P220 Elite Dark TB

By Reed Snyder

Firearms Insider Reviews - 8 Key Points

Claim to Fame: reliability and accuracy

Target Market: the P220 is a higher end .45 caliber full size duty pistol

FNBs: (Features & Benefits)

-Ergonomic beavertail grip

-Front cockig serrations

-SIGLITE^® Adjustable combat Nights Sights

-Sig Sauer’s Short Reset Trigger

-Threaded barrel to host suppressors

-Proven and reliable design almost 40 years old

-4-Point Safety System DA/SA

-Integral accessory rail

-8 round capacity factory magazines

Does it come in black?  While the Sig Sauer P220 is manufactured with a huge number of variants, the Elite Dark feature can be found on the following models.

-P220 Scorpion TB

-P220 Elite Stainless

-P220 Elite Dark

-P220 Match Elite

-P220 Scorpion

What others are saying?

-Christian Gun Owner

-Personal Defense World

Price point

-MSRP =   Sig Sauer: $1,289.00

-Retail =    Grab a Gun: $959.57

                      Cheaper Than Dirt!: $1,013.62

I need it now! Availability Available on many websites including gunbroker.com

Our Rating

+  Easy to handle

+  Accurate and reliable

+  Proven design

+  Exceptional features

-  Priced a little higher than comparable pistols

Score: 9.0 Amazing!!

Reed Snyder

AR-15 Podcast

I have used and owned one or another variation of Sig Sauer’s pistols for almost 25 years.  During that time, I have never been disappointed by any of the pistols that I have had the pleasure to use.  I purchased my Sig P220 in 2010.  I’ve fired my pistol at local ranges, on my deer lease, and in local “bragging rights” competitions with my friends.  The P220 has never failed me and I have come to appreciate the pistol to such a degree that I would stake the lives of my family and myself upon the knowledge that this pistol will work every time I pick it up.  I know that we have all heard others talk about this or that pistol being better than all others.  I’ll not say that here.  I will tell you that my P220 stands shoulder to shoulder with the best pistols out there and I’ll defend that statement to the bitter end.

Smith & Wesson Model 60 "Chiefs Special"

 

By Ryan Michad

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The Quintessential Snubby Revolver; Concealed Carry; Accuracy.

Target Market: Concealed Carriers, People who enjoy classic revolvers, snub-nose revolver enthusiasts.

FNBs (Features & Benefits of this product) Key Features Stainless Steel Construction Chambers .38 Spl +P Ammunition (Some chamber .357 Mag.) Traditional S&W Safety Mechanisms Ramped Integral Front Sight and Notch Rear Sight (Non-Adjustable) Five Shot Capacity

Does it come in black?  The S&W Model 60 is available only in stainless steel.  There are, however, other revolvers in the S&W Lineup similar to the S&W Model 60 which offer other materials & finishes.

What others are saying? “While the new Model 60 did not live up to my expectations in terms of accuracy, the subsequent sample S&W sent me was superb.” -Jeff Quinn, Gunblast.com Gunblast.com Review

Price point MSRP = $729.00 Retail = $350 to $550

I need it now! Availability:  These are readily available at any gunshop that stocks Smith & Wesson Firearms or you can also find many examples on Gunbroker.com

Our Rating +  The revolver is very small, and very concealable. +  It chambers .38 Special +P which is a fairly decent self-defense round. Some models also chamber .357 Magnum. +  It has stainless steel construction which offers some measure of corrosion resistance. +  For a small snub-nose revolver, it has surprising accuracy.

-  The gun recoils quite heavily when loaded with .357 Magnum rounds. -  The sights, while satisfactory for close up work, are lacking. They tend to wash out in bright sunlight, being made out of stainless steel. -  The gun only holds five shots, so you have to be comfortable with reloading and with the guns limitations.

Score: 8.0 Great!!!!

Ryan Michad’s Links Handgun Radio

Ruger Redhawk

  By Ryan Michad

Firearms Insider Reviews - 8 Key Points

Claim to Fame (What this product does best?) Rugged Reliability and Power

Target Market (Who does this product serve best?) Handgun Hunters, Silhouette Shooters, Big-Bore Revolver enthusiasts.

FNBs (Features & Benefits of this product)

Key Features Stainless Steel Construction Three Cylinder Locking Points Transfer Bar Safety Mechanism White Outline Rear Sight; Red Insert Front Sight Hunter Model Offers Mounting Points for Optics

Key Benefits The Hunter Model includes free scope rings

Does it come in black? The Ruger Redhawk comes in stainless steel only.

What others are saying? “The Ruger Redhawk is built to last a lifetime” -Jeff Quinn, Gunblast.com Gunblast.com Review

Price point (MSRP versus actual retail) MSRP = $989.00 to $1049.00 Retail = $500 to $800

I need it now! Availability (Where can I buy this TODAY?) These are readily available at any gunshop that stocks Ruger Firearms or you can also find many examples on Gunbroker.com

Our Rating +  The Trigger pull is AMAZING! I was very impressed with the smoothness of the action and the pull weight was not very heavy at all, but not too light. +  The gun balances well in the hand. +  The heavy weight of the pistol (54 oz.) helps soak up some of that .44 Magnum recoil. +  The built in provisions for scope mounting on the Hunter model are a real plus.

-  The heavy weight is both a plus and a minus.  You would want a good holster to carry this in the field all day. -  The rubber grips that came on it did not allow me to hold the gun well. The factory wood grips helped me maintain control of the revolver much better.  Others may have a different experience.

Score: 8.5 Great!!!!

Ryan Michad’s Links

Handgun Radio